Search NASA⌕ Search

SEARCH · Search NASA

Results for “spinels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Origin of Electrochemical Activation Leading to Enhanced Cycling Stability of Li‐ and Mn‐Rich Cathodes

Electrochemical activation is a critical step for optimal functioning of Li- and Mn-rich (LMR) cathodes, yet the underlying mechanism for such activation remains elusive. Here, by using scanning/transmission electron microscopy (S/TEM) combined with the associated energy-dispersive x-ray spectroscopy (EDS) and electron energy-loss spectroscopy (EELS), we decipher the origin of the activation enhanced electrochemical properties. We reveal that activation induces the formation of a spinel-like phase within the C2/m domains of the LMR cathode, where the transition-metal ions partially occupy both the tetrahedral (8a) and octahedral (16c) sites of the $Fd\bar{3}m$ spinel lattice, distinguishing the spinel-like phase from the conventional high-voltage spinel. Systematic varying the cycling voltage reveals a critical activation voltage above which this spinel-like phase forms, while lower voltages preserve the layered bulk structure. As the spinel-like phase is a stable structure for electrochemical cycling, the present findings provide direct mechanistic insight into the voltage-dependent activation process and explain how the C2/m to spinel-like transformation upon activation contributes to the electrochemical performance of LMR cathodes, providing guidance for the rational design of Li-rich cathodes with enhanced cycling durability.

Li-rich and Mn-rich cathode↗
NASA NTRS1973

Oxide minerals in lithic fragments from Luna 20 fines.

One hundred seventy-six oxide mineral grains in the Luna 20 samples were analyzed by electron microprobe. Spinel is the most abundant oxide, occurring in troctolite fragments. Next most abundant is ilmenite, which occurs in all rock types except those containing spinel. Chromite also occurs in all rock types except those containing spinel. Minor amounts of ulvospinel, armalcolite, zirkelite, baddeleyite and an unidentified TiO2-rich phase were also found. Spinel grains are predominantly spinel-hercynite solid solutions, commonly with very minor chromite. The Fe/(Fe + Mg) ratio is generally lower than in spinel from Apollo 14 rocks. Chromites in non-mare rocks are similar to those from mare rocks. Ilmenite of mare origin is Mg-poor and Zr-rich compared to non-mare ilmenite; these elements may therefore be useful in determining the origin of ilmenite grains. Phase equilibria considerations suggest that spinel troctolite crystallized from a melt high in alumina; a likely candidate is the high-alumina basalt of Prinz et al. (1973).

Brett, R.↗
NASA NTRS1993

Chromite-rich mafic silicate chondrules in ordinary chondrites: Formation by impact melting

Chromium-rich chondrules constitute less than 0.1 percent of all ordinary chondrite (OC) chondrules and comprise three groups: chromian-spinel chondrules, chromian-spinel inclusions, and chromite-rich mafic silicate (CRMS) chondrules. Chromian-spinel chondrules (typically 100-300 microns in apparent diameter) exhibit granular, porphyritic and unusual textures and occur mainly in H chondrites. Their morphologies are distinct from the irregularly shaped chromian-spinel inclusions of similar mineralogy. Chromian-spinel chondrules and inclusions consist of grains of chromian-spinel embedded in plagioclase (Pl) or mesostasis of Pl composition. Many also contain accessory ilmenite (Ilm), high-Ca pyroxene (Px), merrillite (Mer), and rare olivine (Ol); some exhibit concentric mineral and chemical zoning. CRMS chondrules (300-1100 microns in apparent diameter) are generally larger than chromian-spinel chondrules and occur in all metamorphosed OC groups. Most CRMS chondrules are nearly spherical although a few are ellipsoidal with a/b aspect ratios ranging up to 1.7. Textures include cryptocrystalline, granular, radial, barred, and porphyritic varieties; some contain apparently relict grains. The chondrules consist of chromite (Chr), Ol and Pl, along with accessory Mer, troilite (Tr), metallic Fe-Ni (Met), Px and Ilm. The mesostasis in CRMS chondrules is nearly opaque in transmitted light; thus, they can be easily recognized in the optical microscope. Based on the similarity of mineralogy and chemistry between CRMS chondrules of different textures (opaque chromite-rich mesostasis, skeletal morphology of Ol grains, similar bulk compositions) we suggest that these chondrules form a genetically related population.

Krot, Alexander N.↗
NASA NTRS2001

KT Boundary Impact Debris from DSDP Site 577

The KT boundary at DSDP Site 577 (Shatsky Rise, western North Pacific) is in a calcareous nannofossil ooze. It is bioturbated so Ir and impact debris are smeared across less than 15 cm of core. An absence of sulfides and chalcophile enrichment and the presence of Mn-micronodules indicate that this boundary did not experience anoxic conditions typical of many other calcareous KT sites. Because of its shallow burial (109 m) ejecta is extremely well preserved and has been the subject of numerous studies. Three high-temperature minerals have been identified at this site. Clinopyroxene (cpx), found only at Site 577 may be precursor to diagenetic sanidine in some European sites. Magnesioferrite spinel has the highest Fe2O3/FeO of any locality and can have and trace inclusions of Ni-magnesiowustite, which is known at only one other site (Site 596). Other debris described includes shocked quartz grains less than 200 microns, hollow spherules possibly related to impact melt glasses found near Chicxulub, and irregular Ir-rich particles that may be derived directly from meteoritic materials. The latter may be related to the fossil meteorite found at Site 576, just 500 km to the east. A large-volume (approx. 10 cc) sample was taken to systematically characterize debris. The less than 60 microns fraction of the carbonate-free sediment contained 44 mg of impact debris. 2700 particles less than l00 microns were classified based on color, shape, and morphology. About 55% are generally light colored, composed mostly of clays, and typically lack magnesioferrite spinel. Less than half of these are quite spherical; many have irregular shapes, possibly from fragmentation. Hollow spherules with smooth shiny surfaces are only 2% of the total but many fragments in the 60 - 100 microns fraction suggest that they were more abundant and that some may have been quite large; 800 microns or more. Cpx-bearing spherules, easily identified by green crystals at the surface, constitute only 2.5% of the total. Three cpx spherules are dumbbells. The other 40% of the debris is a complex assemblage of dark-colored particles, most of which have magnesioferrite spinel. We have currently separated these into 6 groups based on color and morphology, but this hardly describes the diversity of this group. They range from smooth and spherical to rough and irregular in shape. Some have a planar cleavage, similar to some broken cosmic spherules. 220 particles were irradiated for trace element analysis, as groups and as individual particles. It appears that every spherule type as at least a few ng/g Ir. Several of the spinel-bearing particles have been identified with high Ir (200-1500 ng/g), Cr (2-5 mg/g), and Ni (2-10 mg/g), consistent with results. It is hoped that some of these will yield potential fragments of the KT bolide. Only five have been sectioned to date and they are characterized by high concentrations of spinel; two contained traces of magnesiowustite. This debris constitutes a complex assemblage of ejecta materials. The light-colored, spinel-free particles likely derive mainly from target materials. A significant fraction of these are probably alteration products of cpx-spherules. The dark-colored debris is more likely to have high siderophile concentrations, and thus a high extraterrestrial component. However, the majority don't. Most of the larger spinel-bearing spherules have modest Ir concentrations (5-30 ng/g).

Kyte, Frank T.↗
DOE OSTI2021

Incorporation of Ti in epitaxial Fe2TiO4 thin films

The titanomagnetites (Fe2-xTixO4, x = 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4 were deposited by molecular beam epitaxy on MgO(001) at 250 – 375°C. The homogeneous incorporation of Ti, Fe valence, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4 and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+ was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+ was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the restriction of the deposition conditions to low temperature by the MgO substrate limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4 by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on temperature-stable substrates.

Kaspar, Tiffany C.↗
DOE OSTI2023

Metasomatic alteration of coarse‐grained igneous calcium‐aluminum‐rich inclusions from CK3 carbonaceous chondrites

Abstract We report on the primary and secondary mineralogies of three coarse‐grained igneous calcium‐aluminum‐rich inclusions (CAIs) (Compact Type A [CTA], Type B [B], and forsterite‐bearing type B [FoB]) from the Northwest Africa (NWA) 5343 (CK3.7) and NWA 4964 (CK3.8) carbonaceous chondrites, compare them with the mineralogy of igneous CAIs from the Allende (CV3.6) chondrite, and discuss the nature of the alteration processes that affected the CK and CV CAIs. The primary mineralogy and mineral chemistry of the CK3 CAIs studied are similar to those from Allende; however, primary melilite and anorthite are nearly completely absent. Although the secondary minerals identified in CK CAIs (Al‐diopside, andradite, Cl‐apatite, clintonite, forsterite, ferroan olivine, Fe,Ni‐sulfides, grossular, ilmenite, magnetite, plagioclase, spinel, titanite, and wadalite) occur also in the Allende CAIs, there are several important differences: (i) In addition to melilite and anorthite, which are nearly completely replaced by secondary minerals, the alteration of CK CAIs also affected high‐Ti pyroxenes (fassaite and grossmanite) characterized by high Ti 3+ /Ti 4+ ratio and spinel. These pyroxenes are corroded and crosscut by veins of Fe‐ and Ti‐bearing grossular, Fe‐bearing Al,Ti‐diopside, titanite, and ilmenite. Spinel is corroded by Fe‐bearing Al‐diopside and grossular. (ii) The secondary mineral assemblages of grossular + monticellite and grossular + wollastonite, commonly observed in the Allende CAIs, are absent; the Fe‐bearing grossular + Fe‐bearing Al‐diopside ± Fe,Mg‐spinel, Fe‐bearing grossular + Fe,Mg‐olivine ± Fe,Mg‐spinel, and Ca,Na‐plagioclase + Fe‐bearing Al‐diopside + Fe‐bearing grossular assemblages are present instead. These mineral assemblages are often crosscut by veins of Fe‐bearing Al‐diopside, Fe,Mg‐olivine, Fe,Mg‐spinel, and Ca,Na‐plagioclase. The coarse‐grained secondary grossular and Al‐diopside often show multilayered chemical zoning with distinct compositional boundaries between the layers; the abundances of Fe and Ti typically increase toward the grain edges. (iv) Sodium‐rich secondary minerals, nepheline and sodalite, commonly observed in the peripheral portions of the Allende CAIs, are absent; Ca,Na‐plagioclase is present instead. We conclude that coarse‐grained igneous CAIs from CK3.7–3.8 s and Allende experienced an open‐system multistage metasomatic alteration in the presence of an aqueous solution–infiltration metasomatism. This process resulted in localized mobilization of all major rock‐forming elements: Si, Ca, Al, Ti, Mg, Fe, Mn, Na, K, and Cl. The metasomatic alteration of CK CAIs is more advanced and occurred under higher temperature and higher oxygen fugacity than that of the Allende CAIs.

Geochemistry & Geophysics↗
DOE OSTI2023

Chromium Poisoning Mitigation Strategy in Strontium-Doped Lanthanum Manganite-Based Air Electrodes in Solid Oxide Fuel Cells

Abstract Chromium poisoning of the air electrode remains an obstacle to the long-term performance of solid oxide fuel cells (SOFCs). In Sr-doped LaMnO3 (LSM) air electrodes, the poisoning process results in two types of deposits, chromium oxide (Cr2O3), and Mn, Cr spinel (MnCr2O4). The former forms electrochemically and the latter forms via a chemical reaction. By applying a small anodic reverse bias, Cr2O3 deposits can be removed because their formation is electrochemical in nature. However, MnCr2O4 deposits remain because their formation is chemical, rather than electrochemical, in nature. In situ chemical decomposition of the Mn, Cr spinel was investigated as an alternate removal method as thermodynamics supports its decomposition into constituent oxides below ∼540 °C in pure oxygen. The spinel decomposition process was characterized using thermogravimetric and X-ray diffraction analyses. The experimentally determined rate of spinel decomposition was undetectable (very slow) with isolated MnCr2O4 powders. The addition of 10 mol% gadolinia doped ceria (GDC) and silver powders significantly increased the rate of decomposition. However, the rate is limited by the diffusion of oxygen through the decomposed oxide layer. Although one strategy may be the addition of GDC and silver to the LSM air electrode to enhance spinel decomposition, the more effective mitigation strategy would be to prevent the formation of MnCr2O4 spinel in the first place through the removal of the reactants: Cr2O3 via electrochemical cleaning and mobile Mn ions in the zirconia electrolyte by incorporating a diffusion barrier layer such as GDC between the air electrode and electrolyte.

Electrochemistry↗
NASA NTRS1994

The stability of hibonite, melilite and other aluminous phases in silicate melts: Implications for the origin of hibonite-bearing inclusions from carbonaceous chondrites

Phase fields in which hibonite and silicate melt coexist with spinel CaAl4O7, gehlenitic melilite, anorthite or corundum at 1 bar in the system CaO-MgO-Al2O3-SiO2-TiO2 were determined. The hibonites contain up to 1.7 wt% SiO2. For TiO2, the experimentally determined partition coefficients between hibonite and coexisting melt D(sub i)(sup Hib/L), vary from 0.8 to 2.1 and generally decrease with increasing TiO2 in the liquid. Based on Ti partitioning between hibonite and melt, bulk inclusion compositions and hibonite-saturated liquidus phase diagrams, the hibonite in hibonite-poor fluffy Type A inclusions from Allende and at least some hibonite from hibonite-rich inclusions is relict, although much of the hibonite from hibonite-glass spherules probably crystallized metasably from a melt. Bulk compositions for all of these CAIs are consistent with an origin as melite + hibonite + spinel + perovskite phase assembalges that were partially altered and in some cases partially or completely melted. The duration of the melting event was sufficient to remove any Na introduced by the alteration process but frequently insufficient to dissolve all of the original hibonite. Simple thermochemical models developed for meteoritic melilite and hibonite solid solutions were used to obtain equilibration temperatures of hibonite-bearing phase assemblages with vapor. Referenced to 10(exp -3) atm, hibonite + corundum + vapor equilibrated at approximately 1260 C and hibonite + spinel +/- melilite + vapor at 1215 +/- 10 C. If these temperatures reflect condensation in a cooling gas of solar composition, then hibonite +/- corundum condensed first, followed by spinel and then melilite. The position of perovskite within this sequence is uncertain, but it probably began to condense before spinel. This sequence of phase appearances and relative temperatures is generally consistent with observed textures but differs from expectations based on classical condensation calculations in that equilibration temperatures are generally lower than predicted and melilite initially condenses with or even after spinel. Simple thermochemical modes for the substitution of trace elements into the Ca site of meteoritic hibonites suggest that virtually all Eu is divalent in early condensate hibonites but that Eu(2+)/Eu(#+) decreases by a factor of 20 or more during the course of condensation primarily because the ratio is proportional to the partial pressure of Al, which decreases dramatically as aluminous phase condense. The relative sizes of Eu and Yb anomalies in meteoritic hibonites and inclusions may be partly due to this effect.

Beckett, J. R.↗
NASA NTRS2014

H Diffusion in Olivine and Pyroxene from Peridotite Xenoliths and a Hawaiian Magma Speedometer

Hydrogen is present as a trace element in olivine and pyroxene and its content distribution in the mantle results from melting and metasomatic processes. Here we examine how these H contents can be disturbed during decompression. Hydrogen was analyzed by FTIR in olivine and pyroxene of spinel peridotite xenoliths from Salt Lake Crater (SLC) nephelinites which are part of the rejuvenated volcanism at Oahu (Hawaii) [1,2]. H mobility in pyroxene resulting from spinel exsolution during mantle upwelling Most pyroxenes in SLC peridotites exhibit exsolutions, characterized by spinel inclusions. Pyroxene edges where no exsolution are present have less H then their core near the spinel. Given that H does not enter spinel [3], subsolidus requilibration may have concentrated H in the pyroxene adjacent to the spinel exsolution during mantle upwelling. H diffusion in olivine during xenolith transport by its host magma and host magma ascent rates Olivines have lower water contents at the edge and near fractures compared to at their core, while the concentrations of all other chemical elements appear homogeneous. This suggests that some of the initial water has diffused out of the olivine. Water loss from the olivine is thought to occur during host-magma ascent and xenolith transport to the surface [4-6]. Diffusion modeling matches best the data when the initial water content used is that measured at the core of the olivines, implying that mantle water contents are preserved at the core of the olivines. The 3225 cm(sup -1) OH band at times varies independantly of other OH bands, suggesting uneven H distribution in olivine defects likely acquired during mantle metasomatism just prior to eruption and unequilibrated. Diffusion times (1-48 hrs) combined with depths of peridotite equilibration or of magma start of degassing allow to calculate ascent rates for the host nephelinite of 0.1 to 27 m/s.

Peslier, A. H.↗
NASA NTRSDate not supplied

Anhydrous Primary Minerals in Ryugu, Ivuna, and Bennu

Samples returned from asteroid Ryugu are chemically and mineralogically similar to CI chondrites [e.g., 1–3]. Both are predominantly composed of low-temperature aqueously formed secondary minerals, whereas high-temperature anhydrous primary minerals, such as olivine, low-Ca pyroxene, spinel, and hibonite, are rarely present. Using secondary ion mass spectrometry (SIMS; Cameca ims-1280HR at Hokkaido University), we performed O [4] and Al–Mg [5] isotope measurements of anhydrous primary minerals in samples of Ryugu and the Ivuna CI chondrite to constrain their origin.Anhydrous primary minerals in our samples of Ryugu and Ivuna occur mostly as monomineralic isolated grains embedded in hydrated matrix. Their O-isotope compositions are distributed along the slope-1 line on the O three-isotope diagram and range from Δ17O ~ –23 to 0‰. Mg-Al spinel grains are 16O-rich (Δ17O ~ –23‰). Low-Ca pyroxene grains are 16O-poor (Δ17O ~ –5‰). Olivine grains show a bimodal distribution of O-isotope composition:10 of 34 grains measured are 16O-rich (Δ17O ~ –23‰) and 24 grains are 16O-poor (Δ17O ~ –7 to 0‰). We found refractory inclusions composed of Mg-Al spinel and hibonite, one from Ryugu and one from Ivuna. Also, in Ivuna, we found an amoeboid olivine aggregate ( AOA) composed of olivine, diopside, anorthite, and Mg-Al spinel and an inclusion composed of olivine and Mg-Al spinel. The minerals in all of these inclusions are 16O-rich (Δ17O ~ –24‰).The 16O-rich grains and inclusions are mineralogically and O-isotopically similar to calcium-aluminum–rich inclusions (CAIs) and AOAs reported in other carbonaceous chondrites [6, 7]. In addition, the initial 26Al/27Al ratios of the two spinel-hibonite inclusions are inferred as ~4.4 × 10–5, also similar to most CAIs in carbonaceous chondrites [6, 8]. The range of Δ17O values for the 16O-poor olivine and low-Ca pyroxene grains is consistent withthat of these minerals in chondrules in most carbonaceous chondrites [9]. Moreover, the most frequent Δ17O value (–6‰) for Mg-rich (Mg# > 97) olivine grains is identical to those for chondrules. Although CI chondrites and Ryugu samples are devoid of chondrules, the 16O-poor grains most likely represent fragments of chondrule-like objects. The presence of both 16O-poor chondrule-like and 16O-rich refractory inclusion–like minerals in Ryugu and Ivuna suggests that some of their building blocks are similar to those of other carbonaceous chondrite groups. They both probably formed in the inner solar protoplanetary disk and were subsequently transported outward.Preliminary data for petrography of asteroid Bennu samples and chemical and isotopic compositions of theiranhydrous primary minerals will also be presented in the meeting.

N Kawasaki↗
DOE OSTI2023

Structural complexity of γ-Al 2 O 3 : The nature of vacancy ordering and the structure of complex antiphase boundaries

The structure of γ-Al2O3 remains largely undetermined despite decades of research. This is due to the high degree of disorder, which poses significant challenges for structural analysis using conventional crystallographic approaches. Herein, we study the structure of γ-Al2O3 with Scanning Transmission Electron Microscopy (STEM) and ab-initio calculations to provide a complete structural description. We show that the microstructure can be understood in terms of two key structural features of nanoscale spinel domains and finite thickness segments termed as complex antiphase boundaries (cAPB) that provide the domain interconnectivity. The spinel domains have a distinctive preference for vacancy ordering, which can be rationalized in terms of a structure with a stacking disorder. Tetragonal P4 1 2 1 2 or monoclinic P2 1 models, all based on the identical motif, can be considered as representative ordered forms. Individual spinel domains are interconnected via cAPBs, which adopt a distinct non-spinel bonding environment of δ-Al 2 O 3 . The most common cAPB consists of a single delta motif with thickness of just 0.6 nm on (001), with the resulting displacement a/4 [101]. Remarkably, the cAPBs are shown to energetically stabilize the spinel domains of γ-Al 2 O 3 explaining their high abundance. We demonstrate how the tetragonal distortions naturally arise in this intricate microstructure and place the proposed model in the context of phase transformations to high temperature transition aluminas.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Raman and X-ray diffraction study of pressure-induced phase transition in synthetic Mg 2 TiO 4

Synthetic Mg 2 TiO 4 qandilite was investigated to 50 and 40.4 GPa at room temperature using Raman spectroscopy and X-ray diffraction, respectively. The Raman measurements showed that cubic Mg 2 TiO 4 spinel transforms to a high pressure tetragonal (I4 1 /amd, No.141) phase at 14.7 GPa. Owing to sluggish kinetics at room temperature, the spinel phase coexists with the tetragonal phase between 14.7 and 24.3 GPa. In the X-ray diffraction experiment, transformation of the cubic Mg 2 TiO 4 to the tetragonal structure was complete by 29.2 GPa, ~5 GPa higher than the transition pressure obtained by Raman measurements, owing to slow kinetics. The obtained isothermal bulk modulus of Mg 2 TiO 4 spinel is K T0 = 148(3) GPa when K T0 ’ = 6.6, or K T0 = 166(1) GPa when K T0 ’ is fixed at 4. The isothermal bulk modulus of the high-pressure tetragonal phase is calculated to be 209(2) GPa and V 0 = 270(2) Å 3 when K T0 ’ is fixed at 4, and the volume reduction on change from cubic to tetragonal phase is about 9%. The calculated thermal Grüneisen parameters (γ th ) of cubic and tetragonal Mg 2 TiO 4 phases are 1.01 and 0.63. Based on the radii ratio of spinel cations, a simple model is proposed to predict post-spinel structures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Infiltration metasomatism of the Allende coarse-grained calcium-aluminum-rich inclusions

We report on the mineralogy, petrography, and O and Al-Mg isotopic systematics of secondary mineralization in the metasomatically altered igneous Ca,Al-rich inclusions (CAIs) [compact type A (CTA), B1, B2, forsterite-bearing B (FoB), and C] from the CV3 carbonaceous chondrite Allende. This alteration affected mainly melilite, and to a lesser degree anorthite, and resulted in the formation of a variety of secondary minerals, including adrianite, Al-diopside, andradite, anorthite, calcite, celsian, clintonite, corundum, dmisteinbergite, ferroan olivine, ferroan monticellite, ferroan Al-diopside, forsterite, grossular, heazlewoodite, hedenbergite, hutcheonite, kushiroite, margarite, monticellite, Na-melilite, nepheline, pentlandite, pyrrhotite, sodalite, spinel, tilleyite, wadalite, and wollastonite. The secondary mineral assemblages are mainly defined by chemical compositions of the primary melilite replaced and elements introduced by an aqueous fluid. Gehlenitic melilite (Åk <35 ) in CTAs and mantles of B1s is mainly replaced by anorthite + grossular; clintonite, corundum, spinel, and Al-diopside are minor. Åkermanitic melilite (Åk 35-90 ) in type B2s, FoBs, and cores of B1s is replaced by the grossular + monticellite + wollastonite, grossular + monticellite, and grossular + Al-diopside assemblages; forsterite, spinel, clintonite, and Na-melilite are minor. In type Cs, lacy melilite (åkermanitic melilite with rounded inclusions of anorthite) is pseudomorphically replaced by the grossular + forsterite + monticellite and grossular + Al-diopside assemblages; Na-melilite is minor. Primary and secondary anorthites in the peripheral portions of CAIs are replaced by nepheline, sodalite, and ferromagnesian olivine. Some CAIs contain voids and cracks filled by andradite, hedenbergite, wollastonite, ±sodalite, ±grossular, ±monticellite, ±tilleyite, and ±calcite. All CAIs studied are surrounded by Wark-Lovering rims, fine-grained matrix-like rims composed of lath-shaped ferroan olivine and abundant nepheline grains, and a layer of salite-hedenbergite pyroxenes + andradite + wollastonite. Grossular associating with monticellite, Al-diopside, and forsterite and replacing åkermanitic melilite ( 27 Al/ 24 Mg ~ 2) has high 27 Al/ 24 Mg ratios (30–100) and shows no resolvable excess of radiogenic 26 Mg (26Mg*). The 27 Al/ 24 Mg ratios (7–10) and 26 Mg* (2–3‰) in the nearly monomineralic grossular veins crosscutting gehlenitic melilite are similar to those of the host melilite and plot along a regression line with 26 Al/ 27 Al ratio of ~5×10 –5 . Oxygen isotopic compositions of secondary minerals in the most Type Bs measured in situ with the UH Cameca ims-1280 and matrix-matched standards plot along mass-dependent fractionation line with Δ 17 O of ~ –3±2‰ with δ 18 O ranging from ~0 to ~10‰. Primary melilite and anorthite in the host CAIs are similarly 16 O-depleted, whereas spinel, forsterite, and most Al,Ti-diopside grains have 16 O-rich compositions (Δ 17 O ~ –25±2‰). Secondary grossular and forsterite in type Cs and type B1 CAI TS-34 show a range of Δ 17 O, from ~ –15 to ~ –1‰; the 16 O-enriched compositions of grossular and forsterite plot along the carbonaceous chondrite anhydrous mineral line. The similar ranges of Δ 17 O and positions on the three-isotope oxygen diagram are observed for primary anorthite; melilite is generally 16 O-depleted compared to anorthite (Δ 17 O ~ –5 to –1±2‰); spinel and fassaite are 16 O-rich (except very Ti-rich fassaite in TS-34 and CTA CAIs). We conclude that Allende CAIs experienced an open-system in situ metasomatic alteration at relatively high temperatures (200-250 °C) in the presence of CO 2 - and H 2 O-bearing fluid with Δ 17 O of ~ –3±2‰ followed by thermal metamorphism at ~ 500 °C on the CV chondrite parent asteroid. During the alteration, most elements were mobile: Si, Na, Cl, K, Fe, S, and Ni were introduced; Al, Ti, Mg, and Ba were locally mobilized; Ca and some Mg and Al were lost from the host inclusions. The alteration occurred after nearly complete decay of 26 Al, >3 Ma after crystallization of CAIs with the canonical ( 26 Al/ 27 Al) 0 of (5.25±0.02)×10 -5 ; 26 Mg* in grossular was inherited from the primary melilite and provide no chronological significance. Oxygen isotopic heterogeneity of primary minerals in the Allende CAIs at least partly is due to isotopic exchange with an aqueous fluid that largely affected melilite, anorthite, perovskite, Zr- and Sc-rich oxides and silicates, and possibly very Ti-rich fassaite.

58 GEOSCIENCES↗
NASA NTRS2003

Compositional Grading in an Impact-produced Spherule Bed, Barberton Greenstone Belt, South Africa: A Key to Condensation History of Rock Vapor Clouds

The chemical and physical processes by which spherules form during the condensation of impact-produced rock vapor clouds are poorly understood. Although efforts have been made to model the processes of spherule formation, there is presently a paucity of field data to constrain the resulting theoretical models. The present study examines the vertical compositional variability in a single early Archean spherule bed in the Barberton Greenstone Belt (BGB), South Africa, in order to better identify the process by which impact vapor clouds condense and spherules form and accumulate. The BGB spherule beds are suitable for this type of study because of their great thickness, often exceeding 25cm of pure spherules, due to the massive sizes of the impactors. Two main problems complicate analysis of vertical compositional variability of graded spherule beds: (1) differential settling of particles in both the vapor and water column due to density and size differences and (2) turbulence within the vapor cloud. The present study compares sections of spherule bed S3 from four different depositional environments in the Barberton Greenstone Belt: (1) The Sheba Mine section (SAF-381) was deposited under fairly low energy conditions in deep water, providing a nice fallout sequence, and also has abundant Ni-rich spinels; (2) Jay's Chert section (SAF-380) was deposited in subaerial to shallow-water conditions with extensive post-depositional reworking by currents. The spherules also have preserved spinels; (3) the Loop Road section (loc. SAF-295; samp. KSA-7) was moderately reworked and has only rare preservation of spinels; and (4) the shallow-water Barite Syncline section (loc. SAF-206; samp KSA-1) has few to no spinels preserved and is not reworked. Although all of the spherule beds have been altered by silica diagenesis and K-metasomatism, most of the compositional differences between these sections appear to reflect their diagenetic histories, possibly related to their differing depositional environments. Sulfate diagenesis in the Barite Syncline and Loop road sections may account for the loss of spinels.

Krull, A. E.↗
NASA NTRS2013

Oxygen Isotope Measurements of a Rare Murchison Type A CAI and Its Rim

Ca-, Al-rich inclusions (CAIs) from CV chondrites commonly show oxygen isotope heterogeneity among different mineral phases within individual inclusions reflecting the complex history of CAIs in both the solar nebula and/or parent bodies. The degree of isotopic exchange is typically mineral-specific, yielding O-16-rich spinel, hibonite and pyroxene and O-16-depleted melilite and anorthite. Recent work demonstrated large and systematic variations in oxygen isotope composition within the margin and Wark-Lovering rim of an Allende Type A CAI. These variations suggest that some CV CAIs formed from several oxygen reservoirs and may reflect transport between distinct regions of the solar nebula or varying gas composition near the proto-Sun. Oxygen isotope compositions of CAIs from other, less-altered chondrites show less intra-CAI variability and 16O-rich compositions. The record of intra-CAI oxygen isotope variability in CM chondrites, which commonly show evidence for low-temperature aqueous alteration, is less clear, in part because the most common CAIs found in CM chondrites are mineralogically simple (hibonite +/- spinel or spinel +/- pyroxene) and are composed of minerals less susceptible to O-isotopic exchange. No measurements of the oxygen isotope compositions of rims on CAIs in CM chondrites have been reported. Here, we present oxygen isotope data from a rare, Type A CAI from the Murchison meteorite, MUM-1. The data were collected from melilite, hibonite, perovskite and spinel in a traverse into the interior of the CAI and from pyroxene, melilite, anorthite, and spinel in the Wark-Lovering rim. Our objectives were to (1) document any evidence for intra-CAI oxygen isotope variability; (2) determine the isotopic composition of the rim minerals and compare their composition(s) to the CAI interior; and (3) compare the MUM-1 data to oxygen isotope zoning profiles measured from CAIs in other chondrites.

Matzel, J. E. P.↗
DOE OSTI2020

Enhanced NO, CO and C 3 H 6 conversion on Pt/Pd catalysts: Impact of oxygen storage material and catalyst architecture

Simultaneous conversion of NO, CO and C 3 H 6 under stoichiometric conditions was carried out on washcoated monoliths containing oxygen storage material (OSM)-promoted mixed Platinum group metals (PGM: Pt(95 %)/Pd(5 %)), to evaluate OSM promotion and to identify the best architecture. The studied OSMs include ceria-zirconia (Ce 0.3 Zr 0.7 O 2 ; CZO) and mixed metal oxide spinel (Mn 0.5 Fe 2.5 O 4 ; MFO). PGM supported directly on the OSM was found to be the best design for CZO, leading to a ~70 °C simultaneous decrease in the light-off temperature (T 80 ; feed temperature giving 80 % conversion) for NO, CO and C 3 H 6 conversion compared to the alumina-supported PGM. Close coupling between the PGM and CZO is responsible for the activity promotion. In contrast, a dual-layer architecture (top PGM layer, bottom MFO layer) outperformed the MFO-supported PGM catalyst. The dual-layer PGM-MFO catalyst decreased the T 80 by ~50 °C for NO, CO and C 3 H 6 conversion compared to the PGM-only catalyst. Enhancement obtained with the dual-layer PGM-MFO architecture relies on a direct catalytic contribution from the spinel. During lean/rich modulation the addition of CZO or spinel helps to mitigate the detrimental impact of modulation on NO, CO and C 3 H 6 conversion above 400 °C. The data suggest that both CZO and MFO can buffer lean/rich modulation but exhibit preference to different reductants; CZO-supported PGM and dual-layer PGM-MFO show no conversion decrease during modulation for CO or C 3 H 6 modulation, respectively. Dynamic oxygen storage capacity (DOSC) measurements show that the spinel exhibits ~10 times higher DOSC than CZO for both CO and C 3 H 6 reductants. Both CO and C 3 H 6 are equally effective reductants for the MFO but CO is better for CZO and PGM-deposited CZO. The study provides useful insight into benefits of OSM and provides guidance for optimization of the multi-component PGM + OSM catalyst composition and architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct Observation of Electron Beam-Induced Phase Transition in MgCrMnO 4

Irreversible structural transformation in intercalation-type cathode materials, which has been frequently observed, has been perceived as a principal cause of capacity fading and voltage decay in (uni) multivalent batteries. Herein, we explored the electron beam-induced spinel to defective rocksalt phase transitions in MgCrMnO 4 , a potential multivalent cation intercalation cathode, using atomic-resolution imaging and spectroscopy in an aberration-corrected scanning transmission electron microscope. This dynamic electron beam irradiation study of specific structural transformations provides an atomistic understanding of the structural evolution observed in transition-metal oxide spinels during electrochemical cycling using multivalent cations, such as Mg 2+ . By combining an imaging study with first-principles modeling, we demonstrate that the mechanism of the spinel to defective rocksalt transformation in MgCrMnO 4 nanostructures is enabled by the presence of oxygen vacancies and is, therefore, very similar to that observed in transition-metal oxide spinels upon Li intercalation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The passivity of low-temperature carburized austenitic stainless steel AISI-316L in a simulated boiling-water-reactor environment

The passive film on low-temperature-carburized AISI-316L austenitic stainless steel was studied in an oxygenated, simulated boiling-water-reactor environment with normal water chemistry. The microstructure was studied using scanning electron microscopy, grazing-incidence X-ray diffractometry, Auger electron spectroscopy, X-ray energy-dispersive spectroscopy, and transmission electron microscopy. For non-surface engineered AISI-316L, three distinct layers were observed after exposure: an outer layer of larger nickel-oxide enriched particles with the spinel structure, an intermediate layer of small Cr-oxide-enriched hematite particles, and a compact inner layer of Cr-enriched oxide also having the spinel structure. Exposure of low-temperature-carburized AISI-316L, in contrast, resulted in only two distinct layers. These layers did not include a compact Cr-rich inner layer. Instead, the innermost layer consisted of an oxide with the spinel structure that was a mixture of Fe, Cr and Ni oxide. The outer layer on the low-temperature-carburized specimen consisted of large loosely stacked particles with the spinel structure of mixed composition. In addition to passive-film characterization, the corrosion rate was studied by monitoring mass loss. Finally, after 500 h of immersion, the mass changes measured were relatively low for all specimens indicating good adhesion and low oxidation rates.

36 MATERIALS SCIENCE↗