Search NASA⌕ Search

SEARCH · Search NASA

Results for “spinels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Origin of lunar meteorite ALHA 81005 - Clues from the presence of terrae clasts and a very low-titanium mare basalt clast

Attention is given to the endogenous (or primary) lithologies of the lunar crust that can be inferred from the terrae clasts and to the significance of a fragment of very low titanium (VLT) mare basalt in thin section, ALHA 81005,9. Fragments of the norite and harzburgite have mineral compositions similar to that of ferroan anorthosite, and a clast of ferroan anorthosite has pyroxenes with lower molar Mg/(Mg+Fe) than in known pristine rocks. It is inferred that the Mg-suite protoliths for the clasts of intermediate composition are magnesian troctolites, spinel troctolites, and feldspathic lherzolites. Whereas clasts of these lithologies are not present in ALHA 81005,9, mineral fragments from them are. Based on the molar Mg/(Mg+Fe) ratio and Cr content of its pyroxenes, a single basaltic clast is determined to be of mare origin. The composition of its plagioclase and the molar Ti/(Ti+Cr) ratios of its pyroxenes suggest that the clast is a fragment of VLT mare basalt. It is noted that if this basalt is significantly younger than the last basin-forming impact event, which was approximately 3.9 x 10 to the 9th years ago, then its presence probably constrains the source crater for ALHA 81005 to be within a hundred kilometers of a VLT mare basalt flow.

Treiman, A. H.↗
NASA NTRS1984

Al-rich objects in ordinary chondrites - Related origin of carbonaceous and ordinary chondrites and their constituents

A description is given of 169 Al-rich objects (arbitrarily defined as having 10 wt pct or more of Al2O3) from 24 ordinary chondrites of types 3 and 4, five regolith breccias containing unequilibrated material, the unique meteorite Kakangari, and a few ordinary chondrites of types 5 and 6. On the basis of shape and texture, the Al-rich objects are divided into chondrules (round, with igneous textures), irregularly shaped inclusions (similar to type F and spinel-rich complex Ca-Al-rich inclusions), and fragments (probably fragments of Al-rich chondrules and inclusions). For descriptive purposes, the Al-rich chondrules are further subdivided into compositional subgroups, although they are entirely transitional.

Bischoff, A.↗
NASA NTRS1984

The microstructure of minerals in coarse-grained Ca-Al-rich inclusions from the Allende meteorite

Transmission electron microscopy (TEM) is used to investigate the microstructure and microchemistry of minerals in Ca-Al-rich, coarse-grained inclusions (CAI) from the meteorite. The spinels contain only low to moderate dislocation densities and are characterized by a ubiquitous, fine black spotty texture that is thought to originate from a slightly nonstoichiometric composition. Whereas the Ti-Al-pyroxenes are relatively devoid of features, they contain veins of secondary phases apparently deposited in unhealed cracks. Chromite is identified in the veins, indicating transport of oxidized iron during alteration. The melilites show the greatest variety of microstructures and are the most heavily altered phase in CAI. High dislocation densities are common and the crystals exhibit considerable internal strain, suggesting that they have not been annealed.

Barber, D. J.↗
NASA NTRS1984

The effects of Cr, Co, Al, Mo and Ta on the cyclic oxidation behavior of a prototype cast Ni-base superalloy based on a 2(5) composite statistically designed experiment

A series of cast Ni-base superalloys were systematically varied at selected levels of Co, Cr, Mo, Ta, and Al. The elemental levels varied were Mo, 0 to 4 percent; Cr, 6 to 18 percent; Co, 0 to 20 percent, Ta, 0 to 8 percent; and Al, 3.25 to 6.25 percent. The cyclic oxidation resistance was determined from specific weight change data as a function of time for 1 hr cycles in static air at 1100 C. The significant terms in decreasing order of their importance were Al, Ta, Cr2, Al-Cr, Cr-Co, Co2, Al-Mo, Cr-Mo, Al-Al, and Mo-Ta. The Al term alone accounted for close to 82 percent of the explained variability. The estimating equation showed that the Al level was the most important and should be at its 6.25 wt % maximum value. The Mo and Ta levels should also be at their maximum 4 and 8 wt % respectively. The cobalt composition should be as low as possible, i.e., 0 wt%. The Cr level optimum varies depending on the other 4 levels. The X-ray diffaction results indicate the most protective scales are alumina/aluminate spinel stabilizized with a tri-rutile oxide high in Ta and Mo.

Barrett, C. A.↗
NASA NTRS1984

Major element chemical compositions of chondrules in unequilibrated chondrites

The chemical compositions (except for metals and sulfides in chondrules) of more than 500 chondrules from unequilibrated E, H, L, LL, and C chondrites were measured using a broad beam of an electron-probe microanalyzer. The compositions of chondrules can be represented by various mixtures of normative compositions of olivine, low-Ca pyroxene, plagioclase, and high-Ca pyroxene with minor amounts of spinel, feldspathoid, SiO2-minerals, etc., indicating that the chondrule precursor materials consisted of aggregates of these minerals. The Al, Na, and K contents of most chondrules reflect the compositions of the ternary feldspar (An-Ab-Kf) of the chondrule precursor materials, and chemical types of chondrules (KF, SP, IP, and CP) are defined on the basis of the atomic proportion of Al, Na, and K.

Ikeda, Y.↗
NASA NTRS1984

Mossbauer spectroscopy and X-ray diffraction of samples from the Santa Catharina iron meteorite

Conversion electron Mossbauer spectroscopy (CEMS) of samples from the Santa Catharina iron meteorite shows the presence of the ordered iron-nickel phase with 50% Ni, tetrataenite, and of the paramagnetic iron-nickel phase with 25% Ni. The FeNi phase with 50% Ni amounts to 70% of the iron-nickel alloys. Futhermore, the CEM spectra show the presence of small peaks from one or more spinel compounds. These small peaks are more pronounced when regions near the rim of the samples are analyzed. The X-ray diffraction of different areas of the samples, both optically dark and optically light areas, shows the presence of a diffraction pattern from a single f.c.c. lattice with a lattice parameter of a=3.58A This means that the two different Fe-Ni phases seen in the CEMS analysis occupy the same lattice. The X-ray photographs also show the presence of super-structure reflections from the ordered FeNi phase, and that the orientation of the f.c.c. lattice is the same within the whole sample.

Roy-Poulsen, H.↗
NASA NTRS1986

The evolution and growth of Al2O3 scales on beta-NiAl

The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.

Doychak, J. K.↗
NASA NTRS1986

Alkali norite, troctolites, and VHK mare basalts from breccia 14304

Six pristine rocks, two mare basalts, and four nonpristine highlands rocks were separated from breccia 14304 for consortium study. The pristine highlands rocks include representatives of the Mg troctolite-anorthosite and alkali suites of the Apollo 14 site. Two troctolite clasts have olivine and plagioclase compositions similar to one group of Apollo 14 troctolites and one also contains spinel. Incompatible element abundances in one are similar to those of 14305 troctolites, although the heavy rare earth elements pattern is distinct among Apollo 14 troctolites. Alkali lithologies include an alkali anorthosite and an alkali norite, the latter having a pristine igneous texture and resembling alkali gabbronites from Apollo 14 and 67975 in mineralogy and mineral compositions. It is suggested that Apollo 14 alkali lithologies and PO4-bearing Mg anorthosites formed from Mg-rich magmas that assimilated various amounts of material rich in P and REE. Another pristine clast from 14304 is an Mg-gabbronorite. The two mare basalt clasts are very high potassium basalts, whose parent magmas could have formed from a typical low-Ti, high-Al basaltic magmas by assimilation of K-rich material. Nonpristine 14304 clasts include melt-textured anorthosites and an augite-rich poikilitic melt rock.

Goodrich, C. A.↗
NASA NTRS1985

Geology and petrology of the Apollo 15 landing site - Past, present, and future understanding

The main objectives of the Apollo 15 lunar mission were to investigate and sample materials from the Apennine Front (expected to be Imbrium ejecta and pre-Imbrian materials), the Hadley Rille, and the mare lavas of Palus Putredinis. The Hadley Rille was found to be a collapsed lava tube or channel, and from it, many mare basalt samples were collected which form two main chemical groups of the same age (3.3 b.y.), isotopic characteristics, and rate-earth element patterns. One group, olivine-normative, contains many vescular specimens and shows an olivine fraction trend. The other group, quartz-normative, is pigeonite-phyric and contains both vitrophyric and coarse-grained samples but exhibits little fractionation. The Apennine Front samples include such highland materials as ferroan anorthosites, spinel-bearing troctolites, norites, impact melts and metamorphosed breccias. A conspicuous component of the regolith breccias is volcanic green glass. The Apennine Front is characterized by a low-KREEP composition, a composition which has never been found as a pristine igneous rock type. Another unexpected discovey was the common occurrence of 3.5 b.y. old volcanic KREEP basalts. It is concluded that all major lunar processes can be profitably studied from the samples and observations at this single location.

Spudis, P. D.↗
NASA NTRS1986

A high-temperature heat sensitive element

This invention concerns the high-temperature heat sensitive element which is stable at high temperatures. A solid solution of the main component MgO-Al2O3-Cr2O3-Fe2O3 which contains spinel crystal structure is mixed with the secondary component ZrO2 at the mol ratio of 100 : 0.1 to 5.0 and sintered to prepare a high-temperature heat sensitive element.

Oguro, M.↗
NASA NTRS1987

On the connection between mare basalts and picritic volcanic glasses

The liquid lines of descent were calculated for low-pressure equilibrium and fractional crystallization of mare basaltic liquids in order to examine the postulated link between picritic volcanic glasses and mare basalts. The models of Longhi (1977, 1982) were modified by including expressions for the armalcolite/ilmenite surface boundary and the Cr-spinel liquidus surface, average molar partition coefficients for armalcolite/liquid pairs, and new experimental data of Longhi and Pan (1987). The results indicate that, with two exceptions, mare basalts and picritic volcanic glasses are not related by simple, linear-surface crystallization processes. However, the compositions of Luna 24 ferrobasalt and Apollo 11 high-K basalts could be closely matched with the lines of liquid descent of certain green and orange picritic glasses, respectively. The calculations also show that the picritic magmas would have fractionated to produce basalts with bulk and mineral compositions similar to those of mare basalts, supporting the hypothesis that mare basalts have fractionated compositions and that the small number of observed linkages between basalts and picritic parents is a consequence of limited sampling.

Longhi, John↗
NASA NTRS1987

Plagioclase-rich inclusions in carbonaceous chondrite meteorites - Liquid condensates?

The characteristics and formation of coarse-grained, plagioclase-rich inclusions are investigated. The textures, mineralogical compositions, and initial Al-26/Al-27 ratios for the plagioclase-rich inclusions are described. It is observed that plagioclase-rich inclusions in carbonaceous chondrites are either Ca-Al-rich inclusions (CAIs) composed of 30-60 vol pct anorthite, and less than 35 vol pct Ti-Al-pyroxene and melilite, or CA chondrites composed of plagioclase, pyroxene, olivine, spinel, and melilite. It is observed that CA chondrules are chemically and mineralogically the most similar components shared by carbonaceous and ordinary chondrites. The textural changes observed in the inclusions are examined. The data reveal that the CAIs have three textural groups: coarse anorthite laths, equigranular anorthite and Ti-Al-pyroxene, and lacy Ti-Al-pyroxene and fine-grained anorthite.

Wark, D. A.↗
NASA NTRS1987

The relationship between geology and geochemistry in the Undarum/Spumans/Balmer region of the moon

Based on regional maps of orbital geochemical variables, major geochemical heterogeneities in the Undarum/Sumans/Balmer region of the moon are found which are usually associated with distinct geological features, and which reveal a north/south dichotomy. The mapped mare and plains units are often the site of heterogeneity, and the plains units in the Balmer basin are probably composed of volcanic material, possibly KREEP-enriched basalt. Data suggest that the northeastern part of the region may contain a minor spinel component. Major mare units of the region are found to have two distinct compositions, possibly indicating two different source regions for the basalts deposited there, but more likely indicating contamination with different amounts of highland debris.

Clark, P. E.↗
NASA NTRS1987

Alteration of Al-rich inclusions inside amoeboid olivine aggregates in the Allende meteorite

The primary phases of Al-rich inclusions in amoeboid olivine aggregates have undergone alteration reactions with the solar nebular gas. The simplest interpretation of the present observations is that melilite was the first primary phase to disappear with falling temperature, and was replaced by grossular + anorthite + feldspathoids, followed by fassaite; spinel was the last phase to be altered. Thermodynamic calculations suggest that Na-rich phlogopite could have formed at about 470 K and chlorite at about 328 K at a water fugacity of 0.000001, which is that of a gas of solar composition in this temperature range. The olivine around Al-rich inclusions is not serpentized, indicating the cessation of gas-solid equilibrium above 274 K.

Hashimoto, Akihiko↗
NASA NTRS1987

High-temperature oxidation/corrosion of iron-based superalloys

The oxidation and sulfidation of several novel iron-base superalloys were evaluated in high-temperature cyclic tests. The experimental austenitic alloys examined were modifications of NASAUT-4GA which were developed for Stirling-engine application. The weight gains and resulting surface scales were measured and analyzed. Mixed oxide scales were found to form on all specimens exposed above 871 C. The build-up of these scales led to a depletion of Mn and Cr in a zone adjacent to the oxides. In addition, the initial oxidation of the Fe-rich alloy was inhibited by a thin but tenacious Si layer which formed at the interface between oxides and the parent layer. Sulfidation tests using Na2SO4 coatings resulted in the formation of a protective spinel and alpha-Fe2O3 phases. Preferential attack of the carbide phase by hydrogen was not observed after 350 h at 871 C.

Lemkey, F. D.↗
NASA NTRS1987

Refractory interplanetary dust particles

Criteria are described by which refractory interplanetary dust particles (IDPs) can be differentiated from the products of spacecraft debris. These criteria have been used to discover and characterize IDPs that are composed predominantly of refractory phases. Two of these particles contain hibonite, perovskite, spinel, refractory glass, and a melilite; only hibonite was identified within a third. The grain size for all particles ranges from 0.05 to 1 micrometer, so that they are much finer grained than the refractory calcium- and aluminum-rich inclusions in meteorites. The glass-containing refractory IDPs may be primitive nebular condensates that never completely crystallized and thus have been preserved extant.

Zolensky, Michael E.↗
NASA NTRS1987

Thermally induced phase changes, lateral heterogeneity of the mantle, continental roots, and deep slab anomalies

Factors which influence the lateral heterogeneity in density and seismic velocity with depth in the upper earth mantle are discussed. It is emphasized that most of the increases in density and seismic velocity with depth are caused by pressure-induced solid-solid phase changes in the high-density high-velocity phases of mineral assemblage, due to variations in temperature. In particular, the ilmenite form of MgSiO3 and the gamma-spinel form of Mg2SiO4 have broad stability fields in cold mantle and are not stable in hotter mantle. It is emphasized that the density and velocity anomalies associated with temperature-induced phase changes in mineral assemblage must be taken into account in the thermal models of the slabs; when these effects are accounted for, the geoid and seismic anomalies associated with subducted slabs are consistent with slab confinement to the upper mantle and with layered models of mantle convection.

Anderson, Don L.↗
NASA NTRS1987

Phase relations of a high-Mg basalt from the Aleutian Island arc - Implications for primary island arc basalts and high-Al basalts

An experimental investigation of a primitive high-Mg basalt, MK-15, collected from lava flows of the Unalaska Island in the Aleutian Island arc has been conducted in order to study primary and parental island arc basalts and the development of island arc magmas. The results suggest a model in which high-Al basalts are generated by moderate amounts of crystal fractionation from more primitive (high Mg/Mg + Fe, lower Al2O3) basaltic magmas near the arc crust-mantle boundary. Somewhere between 20-30 depth, significant amounts of clinopyroxene and olivine, with lesser amounts of spinel and possibly amphibole, fractionate, forming layer of olivine-clinopyroxenite at the base of the arc crust.

Gust, D. A.↗