Search NASA⌕ Search

SEARCH · Search NASA

Results for “strain effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A very promising piezoelectric property of Ta{sub 2}O{sub 5} thin films. II: Birefringence and piezoelectricity

Birefringent and piezoelectric properties of Ta{sub 2}O{sub 5} ceramic thin films of monoclinic and trigonal structures were analyzed. The birefringence, observed by reflected polarized light microscopy, yields information on thin film microstructures, crystal shapes and sizes and on crystallographic orientations of grains of trigonal structure. Such an information was considered for investigating piezoelectric properties by laser Doppler vibrometry and by piezoresponse force microscopy. The vibration velocity was measured by applying an oscillating electric field between electrodes on both sides of a Ta{sub 2}O{sub 5} film deposited on a Si substrate which was pasted on an isolating mica sheet. In this case, it is shown that the vibration velocity results were not only from a converse piezoelectric effect, proportional to the voltage, but also from the Coulomb force, proportional to the square of the voltage. A huge piezoelectric strain effect, up to 7.6%, is found in the case of Ta{sub 2}O{sub 5} of trigonal structure. From an estimation of the electrical field through the Ta{sub 2}O{sub 5} thin film, this strain likely corresponds to a very high longitudinal coefficient d{sub 33} of several thousand picometers. Results obtained by piezoresponse force microscopy show that trigonal grains exhibit a polarization at zero field, which is probably due to stress caused expansion in the transition monoclinic-trigonal, presented in a previous article (part I). - Graphical abstract: Image of cross-polarized optical microscopy showing grains of trigonal structure embedded in the monoclinic phase (on the left); (a) mounting of the sample for Laser Doppler Vibrometry, sample constituted of several layers and its equivalent electrical circuit; (b) longitudinal displacements due to converse piezoelectric and Coulomb effects and corresponding piezoelectric strain-U{sub app.}. hystereses. Highlights: > A new Ta{sub 2}O{sub 5} trigonal phase is shown to be birefringent and piezoelectric. > This phase is related to a reversible transition with a monoclinic phase. > The piezoelectricity of this trigonal phase is of several thousands of pm/V. > It is compared to piezoelectricity of the monoclinic phase of several tens of pm/V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain-induced stabilization of Al functionalization in graphene oxide nanosheet for enhanced NH{sub 3} storage

Strain effects on the stabilization of Al ad-atom on graphene oxide (GO) nanosheet as well as its implications for NH{sub 3} storage have been investigated using first-principles calculations. Tensile strain is found to be very effective in stabilizing the Al ad-atom on GO. It strengthens the C-O bonds through an enhanced charge transfer from C to O atoms. Interestingly, Al's stability is governed by the bond strength of C-O rather than that of Al-O. Optimally strained Al-functionalized GO binds up to 6 NH{sub 3} molecules, while it binds no NH{sub 3} molecule in unstrained condition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of surface strain on oxygen adsorption on Zr (0001) surface

The effect of surface strain on oxygen adsorption on Zr (0 0 0 1) surface is investigated by density functional theory (DFT) calculations. It is demonstrated that both surface strain and interactions between oxygen adsorbates influence the adsorption process. Oxygen binding to zirconium becomes stronger as the strain changes from compressive to tensile. When oxygen coverage is low and the oxygen interactions are negligible, surface face-centered cubic sites are the most stable for O binding. At high coverage and under compression, octahedral sites between second and third Zr layers become most favorable because the interactions between adsorbates are weakened by positive charge screening. Calculations with both single-layer adsorption model and multiple-layer adsorption model demonstrate that compressive strain at the Zr/oxide interface will provide a thermodynamic driving force for oxygen to incorporate from the surface into the bulk of Zr, while binding oxygen to the Zr surface will be easier when tensile strain is applied.

36 MATERIALS SCIENCE↗

A computational study of the electronic properties of one-dimensional armchair phosphorene nanotubes

We have performed a comprehensive first-principle computational study of the electronic properties of one-dimensional phosphorene nanotubes (PNTs), and the strain effect on the mechanical and electrical properties of PNTs, including the elastic modulus, energy bandstructure, and carrier effective mass. The study has demonstrated that the armchair PNTs have semiconducting properties along the axial direction and the carrier mobility can be significantly improved by compressive strain. The hole mobility increases from 40.7 cm{sup 2}/V s to 197.0 cm{sup 2}/V s as the compressive strain increases to −5% at room temperature. The investigations of size effect on armchair PNTs indicated that the conductance increases significantly as the increasing diameter. Overall, this study indicated that the PNTs have very attractive electronic properties for future application in nanomaterials and devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bare Fiber Bragg Gratings embedded into concrete buffer Supercontainer concept for nuclear waste storage [ANIMMA--2015-IO-337]

Nuclear power plants have been generating electricity for more than 50 years. In Belgium, 55% of the current energy supply comes from nuclear power. Providing for the safe storage of nuclear waste, including spent fuel (SF) and vitrified high level radioactive waste (HLW), remains an important challenge in the life cycle of nuclear fuel. In this context, the Belgian Agency for Radioactive Waste and Enriched Fissile Materials (ONDRAF/NIRAS) is investigating a reference conceptual design called the Supercontainer (SC) for the packaging of SF and HLW. This conceptual design is based on a multiple-barrier system consisting of a hermetically-sealed carbon steel overpack and a surrounding highly-alkaline concrete buffer. The first one is developed to retain the radionuclides. The two main functions of the buffer are (a) to create a high pH environment around the carbon steel overpack in order to passivate the metal surface and so to slow down the corrosion propagation during the thermal phase and (b) to provide a radiological shielding during the construction and the handling of the Supercontainer. A recent test has been performed to investigate the feasibility to construct the SC. This test incorporated several kinds of sensors including Digital Image Correlation (DIC), Acoustic Emission (AE), corrosion sensing techniques and optical fibers with and without fiber Bragg gratings (FBGs). In particular, several single-mode optical fibers with 4 mm long FBGs with different Bragg wavelengths and distributed along the optical fibers were used. For casting and curing condition monitoring, a number of gratings were incorporated inside the concrete buffer during the first stage of construction. Then other sensors were embedded near a heat source installed in the second stage to simulate the effects of heat generated by radioactive waste. The FBGs were designed to measure both temperature and strain effects in the concrete. To discriminate between these effects special packaging was used for some sensors that were installed very close to the unpackaged ones. Sensors placed in plastic tubes have reduced sensitivity to strain, while the ones inserted in metal tubes are only temperature sensitive and their readings can be directly compared with those obtained from thermocouples located nearby. In addition to monitoring temperature and strain behaviour, embedding also had as objective to determine the impact of the high alkaline environment on the silica fibers over a very long time. This article presents the preliminary results obtained with the different FBGs and provides recommendations for future improvement. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of SiGe/Ge heterostructures and graded layers using variable angle spectroscopic ellipsometry

Variable angle spectroscopic ellipsometry (VASE) has been used to characterize Si(x)Ge(1-x)/Ge superlattices (SLs) grown on Ge substrates and thick Si(x)Ge(1-x)/Ge heterostructures grown on Si substrates. Our VASE analysis yielded the thicknesses and alloy compositions of all layers within the optical penetration depth of the surface. In addition, strain effects were observed in the VASE results for layers under both compressive and tensile strain. Results for the SL structures were found to be in close agreement with high resolution x-ray diffraction measurements made on the same samples. The VASE analysis has been upgraded to characterize linearly graded Si(x)Ge(1-x) buffer layers. The algorithm has been used to determine the total thickness of the buffer layer along with the start and end alloy composition by breaking the total thickness into many (typically more than 20) equal layers. Our ellipsometric results for 1 (mu)m buffer layers graded in the ranges 0.7 less than or = x less than or = 1.0, and 0.5 less than or = x less than or = 1.0 are presented, and compare favorably with the nominal values.

Croke, E. T.↗

Environmental effects on high strain rate properties of graphite/epoxy composite

The effects of hygrothermal conditions on the high-strain-rate properties of a unidirectional graphite/epoxy material, AS4/3501-6, were evaluated using standard physical and mechanical tests to determine the properties of the lamina. A time-temperature-moisture equivalence principle was applied to obtain master curves for the longitudinal, transverse, and in-plane shear moduli and corresponding strengths and ultimate strains of the specimens. It was found that the longitudinal properties of the material remained unchanged at all conditions, except for the longitudinal modulus, which showed a slight increase with temperature, moisture, and strain rate. On the other hand, all transverse and intralaminar shear properties were found to decrease with increasing temperature and moisture contents at a fixed strain rate.

Yaniv, Gershon↗

Phonon Polariton-assisted Infrared Nanoimaging of Local Strain in Hexagonal Boron Nitride

Strain plays an important role in condensed matter physics and materials science because it can strongly modify the mechanical, electrical, and optical properties of a material and even induce a structural phase transition. Strain effects are especially interesting in atomically thin two-dimensional (2D) materials, where unusually large strain can be achieved without breaking them. Measuring the strain distribution in 2D materials at the nanometer scale is therefore greatly important but is extremely challenging experimentally. Here, we use near-field infrared nanoscopy to demonstrate phonon polariton-assisted mapping and quantitative analysis of strain in atomically thin polar crystals of hexagonal boron nitride (hBN) at the nanoscale. A local strain as low as 0.01% can be detected using this method with ~20 nm spatial resolution. Such ultrasensitive nanoscale strain imaging and analysis technique opens up opportunities for exploring unique local strain structures and strain-related physics in 2D materials. In addition, experimental evidence for local strain-induced phonon polariton reflection is also provided, which offers a new approach to manipulate light at deep subwavelength scales for nanophotonic devices.

36 MATERIALS SCIENCE↗

Tailoring a two-dimensional electron gas at the LaAlO{sub 3}/SrTiO{sub 3} (001) interface by epitaxial strain.

Recently a metallic state was discovered at the interface between insulating oxides, most notably LaAlO{sub 3} and SrTiO{sub 3}. Properties of this two-dimensional electron gas (2DEG) have attracted significant interest due to its potential applications in nanoelectronics. Control over this carrier density and mobility of the 2DEG is essential for applications of these unique systems, and may be achieved by epitaxial strain. However, despite the rich nature of strain effects on oxide materials properties, such as ferroelectricity, magnetism, and superconductivity, the relationship between the strain and electrical properties of the 2DEG at the LaAlO{sub 3}/SrTiO{sub 3} heterointerface remains largely unexplored. Here, we use different lattice constant single-crystal substrates to produce LaAlO{sub 3}/SrTiO{sub 3} interfaces with controlled levels of biaxial epitaxial strain. We have found that tensile-strained SrTiO{sub 3} destroys the conducting 2DEG, while compressively strained SrTiO{sub 3} retains the 2DEG, but with a carrier concentration reduced in comparison to the unstrained LaAlO{sub 3}/SrTiO{sub 3} interface. We have also found that the critical LaAlO{sub 3} overlayer thickness for 2DEG formation increases with SrTiO{sub 3} compressive strain. Our first-principles calculations suggest that a strain-induced electric polarization in the SrTiO{sub 3} layer is responsible for this behavior. The polarization is directed away from the interface and hence creates a negative polarization charge opposing that of the polar LaAlO{sub 3} layer. This behavior both increases the critical thickness of the LaAlO{sub 3} layer, and reduces carrier concentration above the critical thickness, in agreement with our experimental results. Our findings suggest that epitaxial strain can be used to tailor 2DEGs properties of the LaAlO{sub 3}/SrTiO{sub 3} heterointerface.

36 MATERIALS SCIENCE↗

A Systematic Study on the Dynamic Softening Behavior of a Heat-Resistant Alloy Considering Thermal and Microstructural Effects

Deep understanding of the relationships among flow softening behaviors, microstructure evolution and process parameters is an essential issue due to the varied strain rate and temperature in industrial hot working schedules. In this research, substantial hot compression tests of a SNCrW heat-resistant alloy were conducted to quantitatively investigate the extrinsic dynamic flow softening behaviors and intrinsic grain size evolution. The thermal softening ratio (TSR) and microstructural softening ratio (MSR) were introduced to, respectively, characterize the degree of deformation heating-induced thermal softening and dynamic recrystallization-induced microstructural softening, respectively. To obtain more accurate results, the TSR was calculated with an improved algorithm that considered strain effects. Additionally, a 3D TSR map and MSR map of the SNCrW heat-resistant alloy were constructed to study the response relationships between thermal softening or microstructural softening and the deformation parameters. In addition, a superimposed contour map of the average grain size on the MSR map was developed to reveal the relationships between microstructural evolution and the macromechanical response. The results show that the grain size of the SNCrW heat-resistant alloy exhibits an inverse correlation with the MSR and is slightly correlated with thermal softening.

36 MATERIALS SCIENCE↗

Strain-Dependent Electronic and Magnetic of Mg-Doped Monolayer of WS{sub 2}

Magnetic properties of Mg-doped WS{sub 2} monolayer under strain are investigated by ab initio methods. Without strain, the Mg-doped WS{sub 2} monolayer is a magnetic nano material and the total magnetic moment is about 1.68 μ{sub B}. We applied strain to Mg-doped WS{sub 2} monolayer from −10 to 10%. The system changes from semiconductor to half-metallic material from 3 to 10% strain. The magnetic moment gets a maximum value of 2.07 μ{sub B} at −3% compressive strain. However, the magnetic moment of system decreases to zero sharply when compressive strain arrived at −5%. The coupling among the 3s states of Mg, 5d states of W, and 3p states of S is responsible for the strong strain effect on the magnetic properties. Our studies predict Mg-doped WS{sub 2} monolayer under strain to be candidates for application in spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of tensile strain on the electronic structure of Ge: A first-principles calculation

Taking the change of L-point conduction band valley degeneracy under strain into consideration, we investigate the effect of biaxially tensile strain (parallel to the (001), (110), and (111) planes) and uniaxially tensile strain (along the [001], [110], and [111] directions) on the electronic structure of Ge using density functional theory calculations. Our calculation shows that biaxial tension parallel to (001) is the most efficient way to transform Ge into a direct bandgap material among all tensile strains considered. [111]-tension is the best choice among all uniaxial approaches for an indirect- to direct-bandgap transition of Ge. The calculation results, which are further elaborated by bond-orbital approximation, provide a useful guidance on the optical applications of Ge through strain engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rationalization of promoted reverse water gas shift reaction by Pt 3 Ni alloy: Essential contribution from ensemble effect

Bimetallic alloys have attracted considerable attention due to the tunable catalytic activity and selectivity that can be different from those of pure metals. Here, we study the superior catalytic behaviors of the Pt 3 Ni nanowire (NW) over each individual, Pt and Ni NWs during the reverse Water Gas Shift (rWGS) reaction, using density functional theory. The results show that the promoted rWGS activity by Pt3Ni strongly depends on the ensemble effect (a particular arrangement of active sites introduced by alloying), while the contributions from ligand and strain effects, which are of great importance in electrocatalysis, are rather subtle. As a result, a unique Ni–Pt hybrid ensemble is observed at the 110/111 edge of the Pt 3 Ni NW, where the synergy between Ni and Pt sites is active enough to stabilize carbon dioxide on the surface readily for the rWGS reaction but moderate enough to allow for the facile removal of carbon monoxide and hydrogenation of hydroxyl species. Furthermore, our study highlights the importance of the ensemble effect in heterogeneous catalysis of metal alloys, enabling selective binding–tuning and promotion of catalytic activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Charge redistribution in core-shell nanoparticles to promote oxygen reduction

Bimetallic core-shell nanoparticles are a class of near-surface alloy catalyst for which there is a high degree of control over size and composition. A challenge for theory is to understand the relationship between their structure and catalytic function and provide guidelines to design new catalysts that take advantage of material properties arising at the nanoscale. In this work, we use density functional theory to calculate the energetics of oxygen dissociative adsorption on 1 nm Pd-shell nanoparticles with a series of core metals. The barrier for this reaction and the binding energy of atomic oxygen is found to correlate well with the d-band level of the surface electrons. Noble metal cores lower the barrier and increase the binding, reducing the activity of the Pd-shell as compared to Pt. Reactive core metals such as Co and Mo, on the other hand, lower the d-band of the shell with respect to the Fermi level, giving the Pd-shelled particles oxygen reduction kinetics similar to that of Pt. While both ligand and strain effects determine the d-band center of the Pd shell, a greater surface relaxation reduces the strain in nanoparticles as compared to single-crystal near-surface alloys. Charge redistribution between core and shell then becomes an important factor for lowering the d-band center of Pd-shelled particles and increasing their activity for the oxygen reduction reaction.

36 MATERIALS SCIENCE↗

Computational study on electrical properties of transition metal dichalcogenide field-effect transistors with strained channel

The performance limits of monolayer transition metal dichalcogenide (TMDC) field-effect transistors (FETs) with isotropic biaxial strain were examined with the “top-of-the-barrier” ballistic MOSFET model. Using a first-principle theory, we calculated the band structures and density of states of strained monolayer MoS{sub 2} and WS{sub 2}, and used the results in model calculations. Introducing strain moves the positions of the conduction band minimum and valence band maximum in k-space with resultant variation in the effective mass and population of carriers. Introducing 2% tensile strain into n-type MoS{sub 2} FETs decreases the electron effective mass and, at the same time, increases energy separation between the lower and the higher valleys in the conduction band, resulting in 26% improvement of the ON current up to 1260 A/m. Whereas compressive strain results in complicated effects, −2% strain also improves the ON current by 15%. These results suggest that introducing artificial strain is promising to improve TMDC FET performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a strain/temperature gauge and attachment system for use on carbon composites at elevated temperature

The difficulties encountered when instrumenting solid rocket motors for acquiring strain data are reviewed, emphasizing the strong temperature dependence due to apparent strain effects. The development of a strain/temperature gage to overcome some of these problems is discussed. This gage is designed to produce low apparent strain when attached to a carbon-carbon substrate. Characterization and performance data for gages attached with ceramic cement to carbon-carbon tensile coupons are presented, and the effect of a flame-sprayed installation process is discussed.

Lanius, S. J.↗

Factors Affecting the Electron Conductivity in Single Crystal Li 7 La 3 Zr 2 O 12 and Li 7 P 3 S 11

One of the serious challenges in all solid-state Li ion batteries is neutral Li intrusion into the solid-state electrolyte that can ultimately cause catastrophic failure. One possibility for this is due to n-type electron conductivity that induces the reaction Li + + e – → Li 0 at sites where the potential is less than the Li + /Li potential. This paper reports hybrid density functional theory calculations of the electronic conductivity in two prototype single crystalline solid-state electrolytes, cubic Li 7 La 3 Zr 2 O 12 (c-LLZO) and Li 7 P 3 S 11 (LPS). The formation energies of important point defects that can affect electron conductivity are determined, and we find that the mechanism of n-type electron conductivity for both solid-state electrolytes is via “small” electron polaron hopping, where the quotes signify that substantial Li ion rearrangement is associated with the polaron formation and its migration. In both electrolytes, the formation energies for the small polarons at the Fermi energy are too high to generate measurable electron conductivity at room temperature. For c-LLZO, the concentration of electron polarons necessary to ensure charge neutrality from positively charged oxygen vacancies formed in synthesis can be significantly higher. Hence, the electron conductivity could be significant when measured with ion-blocking metal electrodes, and we discuss how the synthesis conditions could affect this magnitude. However, in the solid-state battery, these polarons are replaced by negatively charged Li vacancies so that the electron conductivity should remain minimal. For LPS single crystals, the inherent minimal electron conductivity is independent of synthesis conditions. Here we also show that the cost of forming Li 0 in bulk c-LLZO is enormous due to strain effects so that it could only potentially form at voids, grain boundaries, or around vacancy defects which relax the lattice strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗