Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Preparation of ultrathin sputtered gold films on palladium as efficient oxygen reduction electro-catalysts

Herein, we present the preparation of ultrathin gold (Au) films on different M (M = Pd, Pt, Rh, Ir, and Ru) electrodes (Au/M) using magnetron sputtering deposition for oxygen reduction reaction (ORR). The ORR electro-catalytic activities of prepared Au/M catalysts increase as follows: Au/Ru < Au/Ir < Au/Rh < Au/Pt < Au/Pd. Accordingly, the oxygen reduction catalytic behaviors of the Au-modified palladium (Au/Pd) thin films with various Au thicknesses (0.16, 0.24, 0.5, and 1 nm) are investigated in acidic environments. It is found that Au modifications can promote oxygen reduction performances due to the development of more catalytic active sites on the Pd catalyst through the existence of Au atoms. Noticeably, Au/Pd samples exhibit a connection in oxygen reduction ability as a function of Au thickness, with the ultrathin 0.16 nm Au/Pd being the most active ORR catalyst. Significantly, the 0.16 nm Au/Pd material demonstrates superior stability after 1000 potential cycles compared with the 0.16 nm Pt/Pd owing to the influence of Au coating and structurally stable surfaces. Therefore, surface modification with the deposition of Au films on Pd represents a favorable technique to boost both the ORR capability and stability of the electro-catalysts.

Magnetron sputtering↗
DOE OSTI2024

Modification of wind turbine wakes by large-scale, convective atmospheric boundary layer structures

In this study, we consider the impact of large-scale, convective structures in an unstable atmospheric boundary layer on wind turbine wakes. Simulation data from a high-fidelity large-eddy simulation (LES) of the AWAKEN wind farm site matching unstable atmospheric conditions were analyzed, and both turbine performance and wake behavior were affected based on their location relative to the convective structures. Turbines located in updraft regions of the flow experienced lower inflow velocity and generated less power, but their wakes were observed to recover faster and saw greater turbulent kinetic energy mixing higher in the boundary layer. The opposite effect was found for turbines in the downdraft regions of the convective structures. A simplified model of this wake behavior was also developed based on a two-dimensional k–ε Reynolds-Averaged Navier–Stokes formulation. This simplified model included the effects of vertical transport, but could be efficiently solved as a parabolic system, and was found to capture similar wake modifications observed in the high-fidelity LES computations.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Ion irradiation induced strain and structural changes in LiTaO 3 perovskite

LiTaO 3 crystals irradiated with 3 MeV and 1.162 GeV Au ions were studied by single crystal x-ray diffraction and Raman scattering measurements. The maximum lattice strains after 3 MeV Au ion irradiation to a fluence of 1.2 × 10 13 cm -2 were 1.2% and 0.6% along the c- and a-/b-axes, respectively. Two effects were observed in 1.162 GeV Au ion irradiated samples: (i) the (0006) and (1120) Bragg peaks were split into doublets, which suggested a subtle structural change due to slight modification of chemical composition; and (ii) the pre-damaged 1.2% lattice strain along the c-axis was relaxed to 0.9% after subsequent irradiation with 1.162 GeV Au ions, while relaxation along the a- or b-axis was not obvious. A distinct change in the Raman spectrum of the <0001> oriented LiTaO 3 crystals was observed after 1.162 GeV Au ion irradiation, but no obvious change was observed in the <1120> oriented samples or in 3 MeV Au ion irradiated samples. Strain and structural changes in crystalline LiTaO3, with or without pre-existing defects, upon ion irradiation are delineated in its responding to inelastic ionization and elastic nuclear collisions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Human‐induced salinity changes impact marine organisms and ecosystems

Abstract Climate change is fundamentally altering marine and coastal ecosystems on a global scale. While the effects of ocean warming and acidification on ecology and ecosystem functions and services are being comprehensively researched, less attention is directed toward understanding the impacts of human‐driven ocean salinity changes. The global water cycle operates through water fluxes expressed as precipitation, evaporation, and freshwater runoff from land. Changes to these in turn modulate ocean salinity and shape the marine and coastal environment by affecting ocean currents, stratification, oxygen saturation, and sea level rise. Besides the direct impact on ocean physical processes, salinity changes impact ocean biological functions with the ecophysiological consequences are being poorly understood. This is surprising as salinity changes may impact diversity, ecosystem and habitat structure loss, and community shifts including trophic cascades. Climate model future projections (of end of the century salinity changes) indicate magnitudes that lead to modification of open ocean plankton community structure and habitat suitability of coral reef communities. Such salinity changes are also capable of affecting the diversity and metabolic capacity of coastal microorganisms and impairing the photosynthetic capacity of (coastal and open ocean) phytoplankton, macroalgae, and seagrass, with downstream ramifications on global biogeochemical cycling. The scarcity of comprehensive salinity data in dynamic coastal regions warrants additional attention. Such datasets are crucial to quantify salinity‐based ecosystem function relationships and project such changes that ultimately link into carbon sequestration and freshwater as well as food availability to human populations around the globe. It is critical to integrate vigorous high‐quality salinity data with interacting key environmental parameters (e.g., temperature, nutrients, oxygen) for a comprehensive understanding of anthropogenically induced marine changes and its impact on human health and the global economy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dynamic acylome reveals metabolite driven modifications in Syntrophomonas wolfei

Syntrophomonas wolfei is an anaerobic syntrophic microbe that degrades short-chain fatty acids to acetate, hydrogen, and/or formate. This thermodynamically unfavorable process proceeds through a series of reactive acyl-Coenzyme A species (RACS). In other prokaryotic and eukaryotic systems, the production of intrinsically reactive metabolites correlates with acyl-lysine modifications, which have been shown to play a significant role in metabolic processes. Analogous studies with syntrophic bacteria, however, are relatively unexplored and we hypothesized that highly abundant acylations could exist in S. wolfei proteins, corresponding to the RACS derived from degrading fatty acids. Here, by mass spectrometry-based proteomics (LC–MS/MS), we characterize and compare acylome profiles of two S. wolfei subspecies grown on different carbon substrates. Because modified S. wolfei proteins are sufficiently abundant to analyze post-translational modifications (PTMs) without antibody enrichment, we could identify types of acylations comprehensively, observing six types (acetyl-, butyryl-, 3- hydroxybutyryl-, crotonyl-, valeryl-, and hexanyl-lysine), two of which have not been reported in any system previously. All of the acyl-PTMs identified correspond directly to RACS in fatty acid degradation pathways. A total of 369 sites of modification were identified on 237 proteins. Structural studies and in vitro acylation assays of a heavily modified enzyme, acetyl-CoA transferase, provided insight on the potential impact of these acyl-protein modifications. The extensive changes in acylation-type, abundance, and modification sites with carbon substrate suggest that protein acylation by RACS may be an important regulator of syntrophy.

Fu, Janine Y.↗
DOE OSTI2025

Temporal Galactose‐Manganese Feeding in Fed‐Batch and Perfusion Bioreactors Modulates UDP‐Galactose Pools for Enhanced mAb Glycosylation Homogeneity

ABSTRACT Monoclonal antibodies (mAbs) represent a majority of biotherapeutics in the market today. These glycoproteins undergo posttranslational modifications, such as N‐linked glycosylation, that influence the structural & functional characteristics of the antibody. Glycosylation is a heterogenous posttranslational modification that may influence therapeutic glycoprotein stability and clinical efficacy, which is why it is often considered a critical quality attribute (CQA) of the mAb product. While much is known about the glycosylation pathways of Chinese Hamster Ovary (CHO) cells and how cell culture chemical modifiers may influence the N‐glycosylation profile of the final product, this knowledge is often based on the final cumulative glycan profile at the end of the batch process. Building a temporal understanding of N‐glycosylation and how mAb glycoform composition responds to real‐time changes in the biomanufacturing process will help build integrated process models that may allow for glycosylation control to produce a more homogenous product. Here, we look at the effect of specific nutrient feed media additives (e.g., galactose, manganese) and feeding times on the N‐glycosylation pathway to modulate N‐glycosylation of a Herceptin biosimilar mAb (i.e., Trastuzumab). We deploy the N‐GLYcanyzer process analytical technology (PAT) to monitor glycoforms in near real‐time for bench‐scale bioprocesses operated in both fed‐batch and perfusion modes to build an understanding of how temporal changes in mAb N‐glycosylation are dependent on specific media additives. We find that Trastuzumab terminal galactosylation is sensitive to media feeding times and intracellular nucleotide sugar pools. Temporal analysis reveals an increased desirable production of single and double galactose‐occupied glycoforms over time under glucose‐starved fed‐batch cultures. Comparable galactosylation profiles were also observed between fed‐batch (nutrient‐limited) and perfusion (non‐nutrient‐limited) bioprocess conditions. In summary, our results demonstrate the utility of real‐time monitoring of mAb glycoforms and feeding critical cell culture nutrients under fed‐batch and perfusion bioprocessing conditions to produce higher‐quality biologics.

Biotechnology & Applied Microbiology↗
DOE OSTI2022

Chemical and Morphological Structure of Transgenic Switchgrass Organosolv Lignin Extracted by Ethanol, Tetrahydrofuran, and $\mathcal{γ}$-Valerolactone Pretreatments

We report the recalcitrance of lignocellulosic biomass is a challenge in biological-based biorefinery systems due to the complex physicochemical structure of plant cell walls. Pretreatment and genetic modification are two approaches in biomass conversion that have succeeded in modifying the structure of lignocellulose to enable better enzymatic deconstruction. However, the structural differences among pretreatment-solubilized lignin isolated from switchgrass genotypes have not been extensively investigated. Here, three organosolv pretreatment systems-ethanol (EtOH), tetrahydrofuran (THF), and γ-valerolactone (GVL)-were used on wild-type (WT) and two transgenic switchgrasses. All organosolv pretreatments caused a significant reduction in the molecular mass of lignins; particularly, up to ~90% decrease was observed in EtOH-pretreated lignin compared to untreated lignin. The WT EtOH lignin also presented the smallest particle size among all WT lignins. THF pretreated transgenic lignins showed a higher molecular mass, β-O-4 linkages, and aliphatic hydroxyl content compared to EtOH and GVL pretreated lignin. The number of hydrogen bonds between lignin and the organic solvents calculated from the molecular dynamics simulations followed the same trend as the experimentally determined reduction in lignin molecular mass. The results revealed the structural changes of solubilized lignin isolated from wild-type and transgenic switchgrass after different organosolv pretreatments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Search for medium effects using jet axis decorrelation in inclusive jets from PbPb collisions at $\sqrt{{s}_{\text{NN}}}$ = 5.02 TeV

The jet axis decorrelation in inclusive jets is studied using lead-lead (PbPb) collisions at a center-of-mass energy per nucleon pair of 5.02 TeV. The jet axis decorrelation is defined as the angular difference between two definitions of the jet axis. It is obtained by applying two recombination schemes on all the constituents of a given jet reconstructed by the anti-kT sequential algorithm with a distance parameter of R = 0.4. The data set, corresponding to an integrated luminosity of 0.66 nb −1 , was collected in 2018 with the CMS detector at the CERN LHC. The jet axis decorrelations are examined across collision centrality selections and intervals of jet transverse momentum. A centrality dependent evolution of the measured distributions is observed, with a progressive narrowing seen in more central events. This narrowing could result from medium-induced modification of the internal jet structure or reflect color charge effects in energy loss. This new measurement probes jet substructure in previously unexplored kinematic domains and show great promise for providing new insights on the color charge dependence of energy loss to jet-quenching models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Solid-state batteries enabled by ultra-high-frequency self-heating

Solid-state batteries (SSBs) are promising next-generation batteries due to their high energy density and enhanced thermal stability and safety. However, their sluggish kinetics and transport at room temperature result in high internal impedance and critically reduce the attainable discharge energy density. Taking advantage of their strong temperature-dependent ionic conductivity, here we introduce ultra-high-frequency (greater than 105 Hz) self-heating (UHFSH) of SSBs, which can rapidly warm up the batteries from room temperature to operating temperature (∼65°C) in less than a minute. As proof of concept, UHFSH experiments were conducted on symmetric solid-state cells with lithium aluminum germanium phosphate electrolyte in different configurations. Using an experimentally validated model, pack-level simulations predict fast heating (50 K/min) and minimized heating energy consumption (less than 4%). Without any modification of the materials or structure of the batteries, our non-intrusive self-heating strategy potentially enables SSBs to discharge more than 2-fold energy in 25°C ambient.

pulse heating↗
DOE OSTI2024

Friction stir processing on a strontium modified, thin-wall, vacuum-assisted high-pressure die-cast Aural-5 alloy to improve tensile and fatigue performance

Here, this study explores the application of friction stir processing (FSP) to enhance the material properties of Sr-modified Aural-5 alloy, with a focus on improved tensile and fatigue properties. Aural-5 is a well-known vacuum-assisted high-pressure die-cast (HPDC) Al-Si7-Mg alloy used in the automotive industry to reduce vehicle weight, enhance fuel efficiency, and lower carbon emissions. This alloy modifies its material chemistry with Sr for fine fibrous networks of eutectic silicon and manganese (Mn) to reduce die soldering. It has significantly less iron (Fe) content resulting in the elimination of detrimental needle-shaped Fe-bearing ß-phase intermetallic and improving ductility. The initial microstructure of as-received HPDC Aural-5 exhibits shrinkage porosity in the middle section, a dendritic microstructure with fibrous Al-Si eutectic colonies, a shear-band structure beneath the die-wall, large dendritic externally solidified crystals (ESCs), needle-shaped Mg 2 Si phase and significant second-phase particulates. Some of those microstructural features, such as porosity, ESCs, needle-shaped Mg 2 Si phase, and large second-phase particles, serve as initiation sites for cracks under mechanical loading, resulting in adverse effects on tensile properties, particularly ductility. FSP effectively transforms the microstructure into a wrought configuration with uniform particle distribution by eliminating porosity and disintegrating dendrites, eutectic colonies, ESCs, second-phase particles, and shear-band structures. FSP-driven microstructure modification enhances yield strength and tensile ductility by ~30% and ~35%, respectively. The fatigue life of the material in a bending mode configuration (stress ratio R = 0.1) after FSP exhibits enhancements ranging from 2.0 to 3.9 times that of the original HPDC Aural-5 alloy, depending on the applied stress level.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Abnormal grain growth driven by high-temperature proton irradiation in nanocrystalline Ni

In this research we examine a nanocrystalline Ni thin film exposed to high-temperature proton irradiation and compare it with as-deposited and annealed-only counterparts. Despite lacking thermal spikes typical of heavy ions, 400 °C proton irradiation drives pronounced grain growth in select grains, whereas annealing alone yields only modest coarsening. Grain-boundary statistics show fewer low-angle boundaries (10–20°) and more high-angle boundaries (55–60°), consistent with irradiation-enhanced mobility of high-misorientation boundaries. The irradiated films retain a random texture, with no evidence of texture development or sharpening. Mechanisms, such as radiation-enhanced grain boundary diffusion, beam-induced heating, and ion channeling-mediated selective grain growth, are unlikely to be the predominant drivers to explain the resultant microstructure. Instead, we suggest irradiation-induced modifications of grain-boundary structure, including possible complexion transitions, as one plausible explanation for this selective grain growth and retention of random texture. However, additional temperature–dose studies are required to confirm the mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of oxidation post treatments on TiO 2 coating manufactured using reactive very low-pressure plasma spraying (R-VLPPS)

TiO 2 coatings manufactured using reactive very low-pressure plasma spraying (R-VLPPS) were analyzed in different regions related to their position compared to the plasma flame. For that, a screen was used in order to hide an area of the substrate from the direct plasma flux. The coating morphology changed from quasi lamellar structure to highly vapor structure and coatings exhibited obvious modifications in terms of phases and mechanical properties. The effect of oxidation post treatment on the as sprayed coating was then studied by selecting two methods: in situ oxidation post treatment and classical thermal treatment. The two post treatments provided an increase of the main rutile phase and a decrease of both the size and the contents of porosity simultaneously.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic Process Intensification via Data-Driven Dynamic Optimization: Concept and Application to Ternary Distillation

Process intensification is a design philosophy aimed at making chemical processes safer and more efficient. Its implementation often results in significant modifications to the design and structure of the process, with several conventional unit operations occurring in the same physical device. Traditionally, process intensification has focused on steady-state operation. In our previous works, we introduced dynamic process intensification (DPI) as a new intensification paradigm based on operational changes for conventional or intensified units. DPI is predicated on switching operation between two auxiliary steady states selected via a steady-state optimization calculation that ensures that the system generates, on average and over time, the same products as in nominal steady-state operation, but with favorable economics. This paper extends the DPI concept and introduces a novel dynamic optimization-based DPI strategy (Do-DPI) that involves imposing a true cyclic operation rather than switching between two discrete states. We discuss its implementation using surrogate dynamic models learned via system identification. Here, an extensive case study concerning a ternary distillation column separating a canonical hydrocarbon mixture shows that Do-DPI can reduce energy use by more than 4% relative to steady-state operation, with no significant deviations in product quality and production rate.

42 ENGINEERING↗
DOE OSTI2026

Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets

We investigate La-site substitution in the high-entropy garnet Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 (LLZNTH) using Ba2+, Sr2+, and Sm3+ to elucidate how dopant governs phase stability, Li-site distribution, and electrochemical behavior. X-ray diffraction shows that Sr2+ is incorporated homogeneously into the garnet lattice, whereas the larger Ba2+ and smaller Sm3+ ions partially exceed the structural tolerance, generating secondary phases. Nevertheless, the Sm-doped composition (x = 0.05) exhibits the highest room-temperature ionic conductivity (2.7 × 10–4 S cm–1). Neutron powder diffraction reveals that Sm substitution drives a redistribution of Li+ from the tetrahedral 24 d sites into the higher-mobility 96 h positions, enhancing the connectivity of the three-dimensional Li-ion migration network. A Sm-doping series (x = 0.01–0.05) further shows that only sufficiently high Sm levels induce this redistribution, whereas lower concentrations retain Li arrangements similar to the undoped garnet. Critical current density measurements demonstrate that La-site dopants also influence interfacial stability against Li metal, underscoring a trade-off between bulk transport enhancement and mechanical robustness. Collectively, these findings reveal that in high-entropy garnets improved ionic conductivity can originate not only from phase-pure structures but also from targeted modification of the Li sublattice, even when accompanied by secondary phases, offering a compositional design principle for garnet electrolytes.

Li, Chang [Mechanical Engineering, School of Scien↗
DOE OSTI2020

Functionalized Polymersomes from a Polyisoprene-Activated Polyacrylamide Precursor

Self-assembled polymer nanoparticles have tremendous potential in biomedical and environmental applications. For all applications, tailored polymer chemistries are critical. In this study, we demonstrate a precursor approach in which an activated, organic solvent-soluble block polymer precursor is modified through mild postpolymerization modifications to access new polymer structures. We synthesized and characterized poly(isoprene)-block-poly(di-Boc acrylamide) diblock polymers. This activated-acrylamide-based polymer was then reacted with amines or reductants in the absence of catalysts to yield the hydrophilic blocks polyacrylamide, poly(hydroxypropylene), and poly(N-ethyl acrylamide). The resulting amphiphilic block polymers self-assembled in water to form polymersomes, as confirmed by cryo-electron microscopy and confocal microscopy. The approach also enables simple functionalization with specialized ligands, which we demonstrated by tagging polymers with an amino-fluorophore and imaging by confocal microscopy. Here, we expect that the methodologies established in this study will open doors to new and useful solution nanostructures with surface chemistries that can be optimized for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

MXenoids: Generalization of MXene-Inspired Covalent Surface Modifications Across Two-Dimensional Materials

The ability to perform versatile covalent surface modifications in two-dimensional (2D) inorganic materials marks a significant advance in the functionalization of this broad family of materials. One particularly successful example of 2D materials with chemically modifiable surfaces are 2D transition metal carbides and nitrides (MXenes). MXenes' strong in-plane metal-carbon bonds and labile surface metal-halide bonds create altogether unprecedented opportunities for versatile postsynthetic modifications and assembling complex materials, including various organic-inorganic hybrids. Here, we demonstrate the general applicability of this surface modification strategy to non-MXene halide-terminated 2D materials, termed MXenoids. These surface modifications enable compositional and electronic structure engineering, introduce chiral hybrid organic-inorganic structures, and photoluminescence ranging from near-IR to blue. This study highlights the avenue of surface chemistry-driven materials design, enhancing the functional capabilities of 2D materials.

Zhou, Chenkun [University of Chicago, IL (United S↗
DOE OSTI2026

Polyketide synthase-based controlled synthesis of polycyclopropanated fuel molecules

Reducing carbon emissions from aviation and long-distance transportation sectors requires the development of sustainable biofuels with suitable energy density, freezing point, and other physical properties. We previously demonstrated biological production of high energy polycyclopropanated fatty acids (POP-FAs, class I) using an iterative polyketide synthase (iPKS) pathway in a Streptomyces host. Here, we used a computational model of fuel properties to identify chain length and cyclopropanation control as critical steps to engineer this iPKS for biofuel applications. We next explored the natural diversity of POP biosynthesis by investigating homologous pathways. Then, by in vivo gene exchange, we determined cyclopropanase (CP) catalysis to be key for POP-FA engineering. Leveraging both natural and engineered pathway product diversity, we demonstrate targeted production of improved POP-FAs, namely shortened POP-FAs with predicted superior freezing point properties for aviation, as well as fully cyclopropane-saturated POP-FAs which should have superior energy-density. These precise and controllable modifications to POP-FA structure open the door for bioproduction of designer POP fuels.

Yin, Kevin↗
DOE OSTI2021

Molecular organization of the E. coli cellulose synthase macrocomplex

Cellulose is frequently found in communities of sessile bacteria called biofilms. Escherichia coli and other enterobacteriaceae modify cellulose with phosphoethanolamine (pEtN) to promote host tissue adhesion. The E. coli pEtN cellulose biosynthesis machinery contains the catalytic BcsA–B complex that synthesizes and secretes cellulose, in addition to five other subunits. The membrane-anchored periplasmic BcsG subunit catalyzes pEtN modification. Here we present the structure of the roughly 1 MDa E. coli Bcs complex, consisting of one BcsA enzyme associated with six copies of BcsB, determined by single-particle cryo-electron microscopy. BcsB homo-oligomerizes primarily through interactions between its carbohydrate-binding domains as well as intermolecular beta-sheet formation. The BcsB hexamer creates a half spiral whose open side accommodates two BcsG subunits, directly adjacent to BcsA’s periplasmic channel exit. The cytosolic BcsE and BcsQ subunits associate with BcsA’s regulatory PilZ domain. As a result, the macrocomplex is a fascinating example of cellulose synthase specification.

59 BASIC BIOLOGICAL SCIENCES↗