Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

On the maintenance of the Marine boundary layer-free tropospheric gradient of transient tracers

A simple model of the marine boundary layer is used to arrive at a steady-state budget for trace gases in this layer. Five processes maintain the tracer balance in the layer. The first is a large-scale horizontal convergence of the tracer; the second is the pumping by clouds of the tracer out of the boundary layer into the free troposphere; the third is penetration by the tracer from the free troposphere into the marine boundary from compensating subsidence in the cloud-free air surrounding cumulus clouds; the fourth is sea surface emission or deposition of the tracer; and the fifth is in situ photochemical production or loss of the tracer within the marine boundary layer. The budget equation is used in deriving an expression for the mixing ratio difference between the two regions. A scale analysis suggests that the mixing ratio difference between the marine boundary layer and the free troposphere can be an order of magnitude smaller in disturbed weather conditions than in suppressed conditions, showing that the difference in chemical concentrations between the free troposphere and the marine boundary layer cannot be rationalized solely on the basis of chemical measurements.

Gidel, L. T.↗

Atmospheric temperature sounding from space

The physical principles underlying thermal radiation are reviewed. The main factors complicating the interpretation of observations in the infrared are clouds, precipitation, scattered solar radiation, and various atmospheric constituents. At microwave wavelengths, the principal factors complicating propagation are precipitation and variable surface emissivity. The devices that have been used since the Nimbus-5 Microwave Spectrometer are surveyed. The rms accuracies of retrieved temperature profiles are at present approximately 1-3 K under favorable cloudless circumstances. Attention is also given to improvements expected in the 1990s.

Staelin, D. H.↗

Uranus - Variability of the microwave spectrum

Radio astronomical observations of Uranus show that the radio emission spectrum is evolving in time. Ammonia vapor must be depleted in the Uranian atmosphere as Gulkis et al. (1978) previously suggested. Since 1965, ammonia either has been decreasing in time or is a decreasing function of latitude, or both, provided that the radio emission is atmospheric in origin. If Uranus has an observable low-emissivity 'surface', these trends may be reversed. The microwave observations made in 1965, at the time when the spin axis of Uranus was nearly perpendicular to the sun-Uranus line, are consistent with an atmospheric opacity profile that would be produced by saturated ammonia vapor in a predominantly hydrogen atmosphere. At the present time, when the spin axis of Uranus is nearly aligned with the sun-Uranus line, the measurements require an opacity that would be produced by saturated water vapor. A large thermal gradient between the pole and equator is ruled out.

Gulkis, S.↗

Comparison of AMSU temperature soundings with those produced by HIRS and AMTS

The new generation of satellite borne radiometers to be launched in the late 1980's or early 1990's are currently planned to have as their main temperature sounding unit the AMSU (Advanced Microwave Sounding Unit). This device consists of two units, one of which contains 11 high spectral and spatial resolution channels which are to be used to produce vertical atmospheric temperature soundings. Other channels are to be used to determine atmospheric liquid water and water vapor amounts, as rain detectors, and for surface emissivity determination. This report, however, shall deal only with the accuracy of temperature retrievals. Toward this end studies have been carried out in which atmospheric temperature profiles were retrieved from simulated radiances for the AMSU channels. As a comparison, atmospheric temperature profiles were retrieved from simulated radiances for the currently operational HIRS infrared sounder as well as the proposed advanced infrared sounder AMTS. All simulations were based on a set of 400 mid-latitude radiosondes.

Reuter, D.↗

Orbiting multi-beam microwave radiometer for soil moisture remote sensing

The effects of soil moisture and other factors on soil surface emissivity are reviewed and design concepts for a multibeam microwave radiometer with a 15 m antenna are described. Characteristic antenna gain and radiation patterns are shown and losses due to reflector roughness are estimated.

Shiue, J. C.↗

Technical development to improve satellite sounding over radiatively complex terrain

High resolution topography was acquired and applied on the McIDAS system. A technique for finding the surface skin temperature in the presence of cloud and reflected sunlight was implemented in the ALPEX retrieval software and the variability of surface emissivity at microwave wavelength was examined. Data containing raw radiances for all HIRS and MSU channels for NOAA-6 and 7 were used. METEOSAT data were used to derive cloud drift and water vapor winds over the Alpine region.

Schreiner, A. J.↗

Thermal infrared opacity of the Mars atmosphere

An analytical technique is presented for the deriving Mars atmosphere opacity from data furnished by the IR Thermal Mapper (IRTM) instruments on the Viking landers. Each IRTM features four telescopes for viewing Mars in six spectral bands and seven spatial fields of view. The present study focuses on 20 microns measurements of the thermal inertia, 0.3-3.0 microns data for the surface albedo, and, finally, the 7, 9, and 15 microns data for the actual opacity derivations. The model takes into account the atmospheric temperature profile, scattering by dust, the surface emissivity and the variation of the surface/atmosphere temperature discontinuity. Analyses are carried out of the possible error factors and the model is used to generate opacity histories for the two Viking Lander sites. The results, when compared with other astronomical data, indicate that the method is sufficiently accurate to use opacity data to analyze the processes of storm genesis and to study local storms.

Martin, T. Z.↗

Applications of TIMS data in agricultural areas and related atmospheric considerations

While much of traditional remote sensing in agricultural research was limited to the visible and reflective infrared, advances in thermal infrared remote sensing technology are adding a dimension to digital image analysis of agricultural areas. The Thermal Infrared Multispectral Scanner (TIMS) an airborne sensor having six bands over the nominal 8.2 to 12.2 m range, offers the ability to calculate land surface emissivities unlike most previous singular broadband sensors. Preliminary findings on the utility of the TIMS for several agricultural applications and related atmospheric considerations are discussed.

Pelletier, R. E.↗

Radiometric analysis of the longwave infrared channel of the Thematic Mapper on LANDSAT 4 and 5

The first objective was to evaluate the postlaunch radiometric calibration of the LANDSAT Thematic Mapper (TM) band 6 data. The second objective was to determine to what extent surface temperatures could be computed from the TM and 6 data using atmospheric propagation models. To accomplish this, ground truth data were compared to a single TM-4 band 6 data set. This comparison indicated satisfactory agreement over a narrow temperature range. The atmospheric propagation model (modified LOWTRAN 5A) was used to predict surface temperature values based on the radiance at the spacecraft. The aircraft data were calibrated using a multi-altitude profile calibration technique which had been extensively tested in previous studies. This aircraft calibration permitted measurement of surface temperatures based on the radiance reaching the aircraft. When these temperature values are evaluated, an error in the satellite's ability to predict surface temperatures can be estimated. This study indicated that by carefully accounting for various sensor calibration and atmospheric propagation effects, and expected error (1 standard deviation) in surface temperature would be 0.9 K. This assumes no error in surface emissivity and no sampling error due to target location. These results indicate that the satellite calibration is within nominal limits to within this study's ability to measure error.

Schott, John R.↗

Comprehensive analysis of Shuttle Orbiter leeside surface infrared imagery obtained during atmospheric entry

The thermographic analysis techniques developed for processing of data from the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment are discussed. The SILTS experiment will obtain high-spatial-resolution infrared images of the leeside of the Space Shuttle Orbiter during atmospheric entry by means of a scanning infrared radiometer located atop the orbiter's vertical stabilizer. Comprehensive analysis of the SILTS thermography requires accurate consideration of all those factors (such as geometry of the observed surfaces, local surface emissivity, solar radiation, and other potential sources of image degradation) which may potentially affect the output of the infrared radiometer. An overview of the entire data processing procedure and brief descriptions of the data processing algorithms are presented.

Myrick, D. L.↗

Noncontact true temperature measurement, 2

A laser pyrometer was developed for acquiring the true temperature of a levitated sample. The reflectivity is measured by first expanding the laser beam to cover the entire cross-sectional surface of the diffuse target. The reflectivity calibration of this system is determined from the surface emissivity of a target with a blackbody cavity. The emissivity of the real target can then be calculated. The overall system constant is obtained by passively measuring the radiance of the blackbody cavity (emissivity = 1.0) at a known, arbitrary temperature. Since the photosensor used is highly linear over the entire operating temperature range, the true temperature of the target can then be computed. The latest results available from this on-going research indicate that true temperatures thus obtained are in very good quantitative agreement with thermocouple measured temperatures.

Lee, Mark C.↗

Studies of isolated neutron stars, pulsars and pulsar-driven nebulae with the advanced X-ray astrophysics facility (AXAF)

The AXAF will signal a revolution in the understanding of neutron stars, pulsars, and Crab Nebula-type supernova remnants. The mission will provide vital and detailed observational data relevant to the physics of superdense matter inside neutron stars, to the acceleration and radiation of nonthermal particles in their magnetospheres, and to the processes whereby these relativistic particles and magnetic fields fuel the surrounding synchrotron nebulosities on scales of parsecs. Highlights of the results should include (1) detection of thermal surface emission from neutron stars, (2) greatly enlarged samples of pulsars that emit magnetospheric (nonthermal) X-rays, and (3) high resolution (spatial and spectral) maps of the nebulae powered by slowing pulsars. The AXAF will extend these studies to external galaxies, being capable of detection of young pulsars and remnants in normal galaxies like M31, in starburst systems like M82, and probably even in galaxies as distant as the Virgo cluster.

Wilson, A. S.↗

The Magellan mission to Venus

The Magellan mission will be the next NASA mission to Venus. This paper describes the mission as it is currently planned, showing how the design of the science payload, the spacecraft, and the mission satisfies the science objectives and requirements as well as other programmatic constraints. The Magellan mission is dedicated to obtaining SAR images of at least 70 percent of the surface of Venus at a resolution of 1 km per line-pair, or better, which is comparable to the coverage and resolution of the Mars Mariner 9 mission. Other investigations will study the geophysical characteristics of the planet using altimetric data and gravity field measurements, and measurements to determine global surface emissivity.

Dallas, S. S.↗

Microwave remote sensing of soil moisture

Knowledge of soil moisture is important to many disciplines, such as agriculture, hydrology, and meteorology. Soil moisture distribution of vast regions can be measured efficiently only with remote sensing techniques from airborne or satellite platforms. At low microwave frequencies, water has a much larger dielectric constant than dry soil. This difference manifests itself in surface emissivity (or reflectivity) change between dry and wet soils, and can be measured by a microwave radiometer or radar. The Microwave Sensors and Data Communications Branch is developing microwave remote sensing techniques using both radar and radiometry, but primarily with microwave radiometry. The efforts in these areas range from developing algorithms for data interpretation to conducting feasibility studies for space systems, with a primary goal of developing a microwave radiometer for soil moisture measurement from satellites, such as EOS or the Space Station. These efforts are listed.

Shiue, J. C.↗

AlGaAs phased array laser for optical communications

Phased locked arrays of multiple AlGaAs diode laser emitters were investigated both in edge emitting and surface emitting configurations. CSP edge emitter structures, coupled by either evanescent waves or Y-guides, could not achieve the required powers (greater than or similar to 500 mW) while maintaining a diffraction limited, single lobed output beam. Indeed, although the diffraction limit was achieved in this type of device, it was at low powers and in the double lobed radiation pattern characteristic of out-of-phase coupling. Grating surface emitting (GSE) arrays were, therefore, investigated with more promising results. The incorporation of second order gratings in distribute Bragg reflector (DBR) structures allows surface emission, and can be configured to allow injection locking and lateral coupling to populate 2-D arrays that should be able to reach power levels commensurate with the needs of high performance, free space optical communications levels. Also, a new amplitude modulation scheme was developed for GSE array operation.

Carlson, N. W.↗

Airborne flux measurements and budget estimates of trace species over the Amazon Basin during the GTE/ABLE 2B expedition

In situ airborne measurements of turbulent heat, moisture, momentum, ozone, and carbon monoxide fluxes in a convective boundary layer were obtained over a tropical rain forest between 1100 and 1630 LT on May 4, 1987. The aircraft flight path was chosen so as to fly over the tower site at the Ducke Forest Reserve near Manaus, Amazonas, Brazil. Both turbulence statistics and mean quantities were used to study the budgets of heat, water vapor, ozone, and carbon monoxide. The ozone budget study shows an accumulation rate in the boundary layer of 0.3 + or - 0.2 ppbv/h. The surface resistance to ozone during this flight was determined to be 0.06 + or - 0.03 s/cm, while the aerodynamic resistance was 0.14-0.17 s/cm. Results from the CO budget analysis show a midday accumulation rate of 0.6 + or - 0.3 ppbv/h in the Amazonian boundary layer. The evidence suggests production of CO in the PBL. A source of CO may exist below the lowest flight level (about 150 m), although it was not possible to determine what part of the flux at flight level was due to chemical production and what part may be due to surface emission.

Ritter, John A.↗

Carbon monoxide over the Amazon Basin during the wet season

Measurements of the distribution of carbon monoxide in the lower atmosphere (150-5000 m) over the Amazon region of Brazil during the wet season, taken in conjunction with the 1987 NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment (ABLE 2B), are analyzed. About 100 hr of airborne, in situ CO measurements were obtained using a tunable diode laser system, providing insights into factors influencing the basin-scale distribution of CO in the Amazonian troposphere during wet season conditions. Distribution of CO over the altitudes 0.15-4.5 km was influenced by such factors as surface emissions from biological sources and long-range transport of pollutants from Northern Hemisphere sources. It is noted that the disruption of mixed layer growth and decay processes has a particularly important influence on CO concentration in the daytime lower troposphere and that the correlation of CO with O3 was positive under conditions influenced by Northern Hemisphere air and negative under all other conditions observed.

Harriss, R. C.↗

Relationship of optical coating on thermal radiation characteristics of nonisothermal cylindrical enclosures

A numerical ray tracing technique was applied to simulate radiation propagating from various non-isothermal cylindrical cavities to determine the effect of optical coating (surface emissivity). In general, the analysis showed that the optical coating and temperature within a cavity have a significant effect on emitted radiation based on cavity dimension. Temperature thresholds were found to exist where the same optical coating may either reduce or increase cavity performance (apparent emissivity). Parametric values of apparent emissivity results are presented over a wide range of variables to correlate cylindrical cavity radiation for non-uniform cavity emissivity values. A universal curve was developed to aid in selecting wall emissivity values for design considerations.

Baumeister, Joseph F.↗