Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface functionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Study of photoemission and work function of large surface areas, phase 3, phase 4

The photoemission of materials which might be used in probe measurements of the exo-atmospheric electric field is considered by evaluating the wavelength dependence of their photoelectric yield for eleven elements over the range 800 to 3200 A. Yield data for zinc, copper beryllium, platinum, cadmium, graphite, carbon, gold, silver, tantalum, and tungsten show that copper-beryllium is a preferred material. Silver has one of the highest photoemissions when exposed to solar radiation.

Source record↗
NASA NTRS1949

Stability derivatives at supersonic speeds of thin rectangular wings with diagonals ahead of tip Mach lines

The investigation includes steady and accelerated vertical and longitudinal motions and steady rolling, yawing, sideslipping, and pitching for Mach numbers and aspect ratios greater than those for which the Mach line from the leading edge of the tip section intersects the trailing edge of the opposite tip section. The stability derivatives are derived with respect to principal body axes and then transformed to a system of stability axes. Theoretical results are obtained, by means of the linearized theory, for the surface-velocity-potential functions, surface-pressure distributions, and stability derivatives for various motions at supersonic speeds of thin flat rectangular wings without dihedral. In the case of yawing, a treatment for the infinitely long wing which takes account of the spanwise variation in the stream Mach number is extended to the finite wing, and a plausible, although not rigorous, solution is obtained for the wing tip effects.

Harmon, Sidney M↗
NASA NTRS2012

The Next Landsat Satellite: The Landsat Data Continuity Mission

The Landsat program is one of the longest running satellite programs for Earth observations from space. The program was initiated by the launch of Landsat 1 in 1972. Since then a series of six more Landsat satellites were launched and at least one of those satellites has been in operations at all times to continuously collect images of the global land surface. The Department of Interior (DOI) U.S. Geological Survey (USGS) preserves data collected by all of the Landsat satellites at their Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. This 40-year data archive provides an unmatched record of the Earth's land surface that has undergone dramatic changes in recent decades due to the increasing pressure of a growing population and advancing technologies. EROS provides the ability for anyone to search the archive and order digital Landsat images over the internet for free. The Landsat data are a public resource for observing, characterizing, monitoring, trending, and predicting land use change over time providing an invaluable tool for those addressing the profound consequences of those changes to society. The most recent launch of a Landsat satellite occurred in 1999 when Landsat 7 was placed in orbit. While Landsat 7 remains in operation, the National Aeronautics and Space Administration (NASA) and the DOI/ USGS are building its successor satellite system currently called the Landsat Data Continuity Mission (LDCM). NASA has the lead for building and launching the satellite that will carry two Earth-viewing instruments, the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS). The OLI will take images that measure the amount of sunlight reflected by the land surface at nine wavelengths of light with three of those wavelengths beyond the range of human vision. T1RS will collect coincident images that measure light emitted by the land surface as a function of surface temperature at two longer wavelengths well beyond the range of human vision. The DOI/USGS is developing the ground system that will command and control the LDCM satellite in orbit and manage the OLI and TIRS data transmitted by the satellite. DOI/USGS will thus operate the satellite and collect, archive, and distribute the image data as part of the EROS archive. DOI/USGS has committed to renaming LDCM as Landsat 8 following launch. By either name the satellite and its sensors will extend the 40-year archive with images sufficiently consistent with data from earlier Landsat satellites to allow multi-decadal, broad-area studies of our dynamic landscapes. The next Landsat satellite and ground system are on schedule for a January, 2013 launch.

Rons, James R.↗
NASA NTRS2012

Membrane Shell Reflector Segment Antenna

The mesh reflector is the only type of large, in-space deployable antenna that has successfully flown in space. However, state-of-the-art large deployable mesh antenna systems are RF-frequency-limited by both global shape accuracy and local surface quality. The limitations of mesh reflectors stem from two factors. First, at higher frequencies, the porosity and surface roughness of the mesh results in loss and scattering of the signal. Second, the mesh material does not have any bending stiffness and thus cannot be formed into true parabolic (or other desired) shapes. To advance the deployable reflector technology at high RF frequencies from the current state-of-the-art, significant improvements need to be made in three major aspects: a high-stability and highprecision deployable truss; a continuously curved RF reflecting surface (the function of the surface as well as its first derivative are both continuous); and the RF reflecting surface should be made of a continuous material. To meet these three requirements, the Membrane Shell Reflector Segment (MSRS) antenna was developed.

Fang, Houfei↗
NASA NTRS1985

Recovering crater production functions from densely cratered surfaces

Two techniques proposed for the recovery of the crater-production functions on densely cratered surfaces have been appraised. The first technique classifies craters according to their degree of rim preservation, then interprets the statistics of the freshest craters as closely mimicking the full population's production function. Although commonly practiced, in fact, this method is demonstrably misleading for densely cratered surfaces. The second technique uses a weighting scheme to recover the production function. Each crater diameter measured is weighed by the fraction of the crater that remains unoverlapped by subsequent impacts. While this method is theoretically sound even at saturation crater densities, it too fails at high densities due to practical difficulties. For this technique to work effectively, one would have to be able to recognize and accurately measure the diameters of craters having less than 10 percent of their rims remaining, a feat beyond reasonable expectation.

Woronow, A.↗
DOE OSTI2020

Polyelectrolyte Surface Diffusion in a Nanoslit Geometry

The surface diffusion of poly-l-lysine (PLL) in a planar nanoslit was studied using convex lens-induced confinement (CLiC) single-molecule tracking microscopy. Here, three surface chemistries were employed to understand the interplay of electrostatic and short-range interactions: an amine-functionalized silica surface, an oligo(ethylene oxide) (OEG)-modified surface, and a 1:1 mixture of the two ligands. Effective surface diffusion coefficients increased rapidly with slit height until saturating for slit heights <30 nm. While diffusion at a semi-infinite interface was significantly faster for OEG surfaces, the diffusion coefficient increased most rapidly with slit height for amine-functionalized surfaces, resulting in surface diffusion within very thin slits being nearly independent of surface chemistry. Intermittent random walks were simulated within a planar slit geometry, using experimentally measured parameters obtained from diffusion at a single interface to account for the characteristic short-range interactions between PLL and each surface chemistry, and were in good agreement with experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Work Functions for Models of Scandate Surfaces

The electronic structure, surface dipole properties, and work functions of scandate surfaces have been investigated using the fully relativistic scattered-wave cluster approach. Three different types of model surfaces are considered: (1) a monolayer of Ba-Sc-O on W(100), (2) Ba or BaO adsorbed on Sc2O3 + W, and (3) BaO on SC2O3 + WO3. Changes in the work function due to Ba or BaO adsorption on the different surfaces are calculated by employing the depolarization model of interacting surface dipoles. The largest work function change and the lowest work function of 1.54 eV are obtained for Ba adsorbed on the Sc-O monolayer on W(100). The adsorption of Ba on Sc2O3 + W does not lead to a low work function, but the adsorption of BaO results in a work function of about 1.6-1.9 eV. BaO adsorbed on Sc2O3 + WO3, or scandium tungstates, may also lead to low work functions.

Mueller, Wolfgang↗
DOE OSTI2026

Unlocking the Future of Aircraft Manufacturing: The Environmental Benefits of Laser Patterning for Surface Enhancement of Aircraft-Certified Alloys

Surface protection and functional modification of aircraft-certified aluminum alloys are essential for corrosion resistance, durability, and long-term airworthiness. At the same time, increasingly restrictive environmental regulations motivate the development of alternatives to legacy wet-chemical surface treatments. This study presents an integrated assessment of ultrafast femtosecond laser surface texturing as a surface functionalization approach for Aluminum 6061 alloys within an aerospace manufacturing and sustainability context. Ultrashort-pulse laser processing enables controlled micro- and nano-scale surface topographical modification with limited thermal impact, allowing adjustment of wettability and surface functionality while preserving bulk material integrity. As a dry and contactless process, femtosecond laser treatment eliminates the use of hazardous chemicals, reduces consumable inputs, and generates minimal secondary waste. A streamlined cradle-to-gate life cycle assessment conducted in accordance with ISO 14040/14044 indicates a lower global-warming potential per functional unit compared with conventional surface treatments, including anodization, plasma-assisted coatings, and organic coating systems. Complementary qualitative analyses addressing environmental health and safety, supply-chain risk, and ESG alignment indicate potential advantages related to occupational safety, regulatory compliance, waste management, and end-of-life recyclability. The investigation is performed on planar Aluminum 6061 reference surfaces with a treated area of 25 mm 2 , providing a controlled laboratory-scale basis for analyzing process behavior, functional surface modification, and associated environmental metrics. Within this defined scope, the results support further evaluation of femtosecond laser surface texturing as a surface engineering option for future aerospace manufacturing.

corrosion resistance↗
NASA NTRS2023

Development of the Ames Global Hyperspectral Synthetic Data Set: Surface Bidirectional Reflectance Distribution Function

This study introduces the Ames Global Hyperspectral Synthetic Data set (AGHSD), in particular the surface bidirectional reflectance distribution function (BRDF) product, to support the NASA Surface Biology and Geology (SBG) mission development. The data set is generated based on the corresponding multispectral BRDF products from NASA's MODIS satellite sensor. Based on theories of radiative transfer in vegetation canopies, we derive a simple but robust relationship that indicates that the hyperspectral surface BRDF can be accurately approximated as a weighted sum of the soil surface reflectance, the leaf single albedo, and the canopy scattering coefficient, where the weights or coefficients are spectrally invariant and thus readily estimated from the multispectral MODIS products. We validate the algorithm with simulations by a Monte Carlo Ray Tracing model and find the results highly consistent with the theoretic derivation. Using reflectance spectra of soil and vegetation derived from existing spectral libraries, we apply the algorithm to generate the AGHSD BRDF product at 1 km and 8-day resolutions for the year of 2019. The data set is biogeochemically and biogeophysically coherent and consistent, and serves the goal to support the SBG community in developing sciences and applications for the future global imaging spectroscopy mission.

Hyperspectral Remote Sensing↗
DOE OSTI2023

Surface Energies of LaMnO 3 High-Index Surfaces Obtained from Density-Functional Theory

Here, the first six cubic LaMnO 3 high-index surfaces, (210), (211), (221), (310), (311), and (320), are examined for the first time. The unrelaxed and relaxed surface energies of the surfaces are computed as a function of surface model thickness using unrelaxed and relaxed surface models, respectively. The (210), (320), (211), and (221) surfaces are found to be more stable than the low-index (011) and (111) surfaces. Helping to explain this result, the surface terminations of the (210), (320), (211), or (221) surface are seen to exhibit a rotational relaxation of the MnO 6 or oxygen octahedra extending from the surface into the bulk. By contrast, the relaxed surface energies of the (310) and (311) surfaces are concluded to be difficult to determine due to a structural transformation or phase change in the surface models of the surfaces away from cubic LaMnO 3 . The finding of a phase change is important. It indicates that a phase change in the surface models of a surface for another material could occur if the surface is relatively open and a different phase of the material is stable at low temperature. When modeling such a surface, two steps are suggested to be taken.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On the surface passivating principle of functional thiol towards efficient and stable perovskite nanocrystal solar cells

Inorganic halide perovskite nanocrystals (PNCs) have demonstrated promising potential for solar cell applications. However, the lability of photoactive CsPbI3 phase under ambient conditions, coupled with considerable amounts of surface defects induced during solidification process, have impeded achieving high performances and longevities of the PNC-based solar cells. Post-treatment of the PNCs with organic ligands has been proposed as an efficient strategy for surface passivation, which, however, still relies on the binding actions of typical functional groups towards surface defects (especially, carboxylates onto iodine vacancies). Herein, we uncover that thiolate, a deprotonated form of thiol, renders distinctive binding feasibility towards iodine vacancies at the CsPbI3 PNC surface, compared with those of typical functional groups. By treating the PNC solid with deprotonated cysteine as a ligand, the surface defects are comprehensively passivated. The solar cells with the modified PNC films demonstrate an excellent PCE of 15.5 % and improved device longevity (77 % of initial PCE over 2 months) under ambient conditions. Our work not only elucidates the chemical principles of thiol on the binding with PNC surface, but also corroborates the power of thiolate as a promising strategy to develop high performances and improved longevity of solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗