Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Structural and morphological modifications of polymer thin film in the presence of nonsolvent

Thin films of sodium poly(acrylic acid) salt (Na-PAA) have been investigated to obtain the modification of the out-of-plane structure and surface morphology in the presence of toluene which is considered as nonsolvent for Na-PAA. X-ray reflectivity analysis show that the out-of-plane thickness of the Na-PAA film increases if the film is kept for longer time inside the toluene. For the thicker film the effect of toluene is more pronounced than the thinner one. Surface morphology obtained from the atomic force microscopy shows that the top surface becomes relatively rough after the dipping of the Na-PAA film inside toluene. Although toluene is nonsolvent for Na-PAA molecules, however, the effect of restructuring of the nanometer-thick polymer film cannot be ignored. The reason for such structural modification has been proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low energy Ar{sup +} sputtering-induced GaAs quantum dot formation and evolution

GaAs quantum dots formed by Ar{sup +} bombardment under normal beam incidence are investigated in both sputtering time and energy domains. When ion energy is maintained at 1000 eV, the surface morphology is found to saturate with high dot uniformity at 3600 s sputtering time. For longer sputtering times, the surface pattern becomes significantly disordered with fluctuations of approx28 and approx24 nm in dot height and base width, respectively. The temporal evolution of dots formed at lower ion energies exhibits a similar trend, as observed at 1000 eV. However, the surface morphology develops in a smaller size scale. Based on the experimental results, we propose a power law model to interpret the correlation between sputtering time and energy as well as their impact on the evolution of lateral dot sizes. The experimental results are in good agreement with the theoretical prediction. Furthermore, photoluminescence is performed to characterize the as-grown and annealed GaAs/AlGaAs quantum dots formed by ion sputtering and molecular beam epitaxy. A significant improvement in the integrated photoluminescence signal has been obtained after thermal annealing, indicating that the potential nonradiative defects can be effectively removed by postgrowth annealing of the sputtering-induced GaAs quantum dot system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Process-Induced Morphological Defects in Epitaxial CVD Silicon Carbide

Silicon carbide (SiC) semiconductor technology has been advancing rapidly, but there are numerous crystal growth problems that need to be solved before SiC can reach its full potential. Among these problems is a need for an improvement in the surface morphology of epitaxial films that are grown to produce device structures. Various processes before and during epilayer growth lead to the formation of morphological defects observed in SiC epilayers grown on SiC substrates. In studies of both 6H and 4H-SiC epilayers, atomic force microscopy (AFM) and other techniques have been used to characterize SiC epilayer surface morphology. In addition to the well-known micropipe defect, SiC epilayers contain growth pits, triangular features (primarily) in 4H-SiC, and macro step due to step bunching. In work at NASA Lewis, it has been found that factors contributing to the formation of some morphological defects include: defects in the substrate bulk, defects in the substrate surface caused by cutting and polishing the wafer, the tilt angle of the wafer surface relative to the basal plane, and growth conditions. Some of these findings confirm results of other research groups. This paper presents a review of published and unpublished investigations into processes that are relevant to epitaxial film morphology.

Powell, J. A.↗

Development of In-situ Digital Microscopy Capabilities for Electrochemical Testing

In-situ digital optical microscopy data was successfully collected during the potentiodynamic polarization of iron in corrosive NaCl solution. This report serves as a foundation for future, more comprehensive experiments that correlate electrochemical responses to near-real time surface morphology tracking. The development of in-situ microscopy and roughness collection will help realize increases in data acquisition of the surface morphology during electrochemical experiments.

36 MATERIALS SCIENCE↗

Annealing effect for SnS thin films prepared by high-vacuum evaporation

Thin films of SnS are deposited onto molybdenum-coated soda lime glass substrates using the high-vacuum evaporation technique at a substrate temperature of 300 °C. The as-deposited SnS layers are then annealed in three different media: (1) H{sub 2}S, (2) argon, and (3) vacuum, for different periods and temperatures to study the changes in the microstructural properties of the layers and to prepare single-phase SnS photoabsorber films. It is found that annealing the layers in H{sub 2}S at 400 °C changes the stoichiometry of the as-deposited SnS films and leads to the formation of a dominant SnS{sub 2} phase. Annealing in an argon atmosphere for 1 h, however, causes no deviations in the composition of the SnS films, though the surface morphology of the annealed SnS layers changes significantly as a result of a 2 h annealing process. The crystalline structure, surface morphology, and photosensitivity of the as-deposited SnS films improves significantly as the result of annealing in vacuum, and the vacuum-annealed films are found to exhibit promising properties for fabricating complete solar cells based on these single-phase SnS photoabsorber layers.

36 MATERIALS SCIENCE↗

Computational study of pressure-driven methane transport in hierarchical nanostructured porous carbons

Using the reflecting particle method together with a perturbation-relaxation loop developed in our previous work, we studied pressure-driven methane transport in hierarchical nanostructured porous carbons (HNPCs) containing both mesopores and micropores in non-equilibrium molecular dynamics simulations. The surface morphology of the mesopore wall was systematically varied by tuning interaction strength between carbon atoms and the template in a mimetic nanocasting process. Effects of temperature and mesopore size on methane transport in HNPCs were also studied. Our study shows that increased mesopore wall surface roughness changes the character of the gas-wall interaction from specular to diffuse, while the gas-gas interaction is diminished due to the decrease of adsorption density. Effects of the mesopore wall surface morphology are the most significant at low temperatures and in small channels. Our systematic study provides a better understanding of the transport mechanisms of light gases through carbon nanotube composite membranes in experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Interfacial Mixing in Tapered Block Polymer Thin Films: Experimental and Theoretical Investigations

Tapered block polymers are an emerging class of macromolecules with unique and diverse self-assembly behavior and properties. Here, we directly examine the manipulation of self-assembled interfaces in poly(isoprene- b -styrene) (I-S)-based block polymers (BPs) by synthesizing non-tapered (I-S), normal tapered (I-IS-S), and inverse tapered (I-SI-S) BPs with controlled monomer segment distributions. We provide the first direct measurements of interfacial mixing for these tapered polymers through X-ray reflectivity (XRR). The density profiles from XRR are compared to results from fluids density functional theory (fDFT) with good agreement. We find that our normal tapered BPs (30 vol % tapering) have similar interfacial mixing to diblock polymers, while our inverse tapered BPs (30 vol % tapering) have much wider interfaces. Additionally, differential scanning calorimetry (DSC) studies elucidate the influence of tapering on the glass transition temperature (T g ) and change of heat capacity (ΔC P ) for each BP phase, and quantitative analysis from ΔC P also indicates enhanced mixing in the inverse tapered I-SI-S BPs. Finally, we investigate the free surface morphologies of these tapered polymers in thin film geometries. The inverse tapered BP form larger island/hole structures likely due to decreased surface elasticity from mixing as a result of the modified interblock interfacial characteristics. These results demonstrate that BPs with similar molecular weights and compositions can exhibit different thermodynamic properties and free surface morphologies in thin film geometries, as influenced by monomer sequence.

36 MATERIALS SCIENCE↗

Palladium-Coated Platinum Powders with Tunable, Nanostructured Surfaces for Applications in Catalysis

Simultaneous control of nanoscale surface morphology and composition remains a challenge in preparing bimetallic catalysts, particularly at the large scale required for industrial application and with high-surface-area substrates. Atomic layer electroless deposition (ALED) is a scalable approach to prepare surface-modified metal powders in which elements more noble than the surface hydrides of the substrate metal are deposited layer-by-layer in a surface-limited fashion. In this paper, we demonstrate that high-surface-area Pt powder is a viable substrate for controlled deposition of Pd adlayers using this technique, with the potential for large-scale preparation, for use in electrocatalytic and catalytic applications such as fuel cells and functionalization of petrochemical feedstocks. Two different growth mechanisms have been proposed based on bulk and surface Pd atomic fractions obtained from atomic absorption spectroscopy and X-ray photoelectron spectroscopy, respectively. Further, spectral simulations were performed to strengthen the proposed growth mechanisms, favoring conformal growth in initial deposition followed by island formation in subsequent cycles. Observation of multiple pathways suggests a means of controlling adlayer surface morphology of ALED materials, in which an initial cycle of deposition sets the fractional coverage and subsequent cycles tune adlayer thickness.

36 MATERIALS SCIENCE↗

Formation of tetragonal or monoclinic ZrO{sub 2} coatings by oxygen plasma treatment of Zr{sub 74.7}Cu{sub 19.7}Nb{sub 5.6} glassy thin films

The authors report on the production of stable nanostructured tetragonal and/or monoclinic ZrO{sub 2} nanopillars achieved by means of oxygen plasma treatment of ternary Zr{sub 74.7}Cu{sub 19.7}Nb{sub 5.6} glassy films. The Zr-based metallic glass thin films were successfully deposited by magnetron sputtering and subsequently subjected to oxygen plasma for various exposure times. The compositions of the oxidized films were determined by Auger electron spectroscopy and X-Ray photoelectron spectroscopy depth profiling while the surface morphology was evaluated by means of atomic force microscopy and scanning electron microscopy. X-Ray diffraction was used for the structural analysis. Our results show that, depending on the length of time of oxygen plasma treatment, tetragonal and/or monoclinic ZrO{sub 2} films can be formed, the surface morphology of which exhibit nanopillar structures with an increased effective surface. These findings provide an easy and efficient way for growing ZrO{sub 2} coatings with a predefined structure suitable for protective and possibly for catalytic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of anodization parameters on the structural morphology of titanium in fluoride containing electrolytes

In the present work, formation of titania nanopores on titanium substrate was investigated in aqueous (sulphuric acid) and neutral organic (glycerol) electrolytes containing different concentrations of HF (0.1-0.2 M). The surface morphology, topography and phase structures were analyzed using scanning electron microscopy, atomic force microscopy and X-ray diffraction techniques, respectively. Under optimized electrolyte conditions, titania nanopore is obtained with the average pore diameter of 64 nm and 84 nm for aqueous and organic electrolytes, respectively. Atomic force microscope investigation shows that the porous layer forms under a competition of titania formation and oxide dissolution up to a limiting thickness of {approx} 75 nm and 100 nm respectively for aqueous and organic electrolytes. The porous structure was observed at 0.15 M HF concentration. It was found that depending on the electrolytes the pore diameter alters and also its concentration effected the porous structures formation. Compared to aqueous electrolytes, organic electrolytes showed larger diameter pores. From the X-ray diffraction measurement it is evident that the as prepared titania nanopores are amorphous in nature, whereas the anodized heat treated titania nanopores are in anatase phase. - Highlights: Black-Right-Pointing-Pointer Aqueous and organic electrolytes were used to synthesize nanoporous titania. Black-Right-Pointing-Pointer The surface morphology varies with various concentrations of HF. Black-Right-Pointing-Pointer Nanopores were formed at optimum HF concentration of 0.15 M. Black-Right-Pointing-Pointer Nanopore diameter was found to be affected by the electrolyte used.

36 MATERIALS SCIENCE↗

An AFM-based pit-measuring method for indirect measurements of cell-surface membrane vesicles

Highlights: • Air drying induced the transformation of cell-surface membrane vesicles into pits. • An AFM-based pit-measuring method was developed to measure cell-surface vesicles. • Our method detected at least two populations of cell-surface membrane vesicles. - Abstract: Circulating membrane vesicles, which are shed from many cell types, have multiple functions and have been correlated with many diseases. Although circulating membrane vesicles have been extensively characterized, the status of cell-surface membrane vesicles prior to their release is less understood due to the lack of effective measurement methods. Recently, as a powerful, micro- or nano-scale imaging tool, atomic force microscopy (AFM) has been applied in measuring circulating membrane vesicles. However, it seems very difficult for AFM to directly image/identify and measure cell-bound membrane vesicles due to the similarity of surface morphology between membrane vesicles and cell surfaces. Therefore, until now no AFM studies on cell-surface membrane vesicles have been reported. In this study, we found that air drying can induce the transformation of most cell-surface membrane vesicles into pits that are more readily detectable by AFM. Based on this, we developed an AFM-based pit-measuring method and, for the first time, used AFM to indirectly measure cell-surface membrane vesicles on cultured endothelial cells. Using this approach, we observed and quantitatively measured at least two populations of cell-surface membrane vesicles, a nanoscale population (<500 nm in diameter peaking at ∼250 nm) and a microscale population (from 500 nm to ∼2 μm peaking at ∼0.8 μm), whereas confocal microscopy only detected the microscale population. The AFM-based pit-measuring method is potentially useful for studying cell-surface membrane vesicles and for investigating the mechanisms of membrane vesicle formation/release.

60 APPLIED LIFE SCIENCES↗

Deciphering the influence of high-flux helium plasma exposure on tungsten nanostructure growth using real-time, in situ spectroscopic ellipsometry

In situ analysis of surfaces during high-flux plasma exposure represents a long-standing challenge in the study of plasma–material interactions. While post-mortem microscopy can provide a detailed picture of structural and compositional changes, in situ techniques can capture the dynamic evolution of the surface. In this study, we demonstrate how spectroscopic ellipsometry can be applied to the real-time characterization of W nanostructure (also known as “fuzz”) growth during exposure to low temperature, high-flux He plasmas. Strikingly, over a wide range of sample temperatures and helium fluences, the measured ellipsometric parameters (Ψ,Δ) collapse onto a single curve that can be directly correlated with surface morphologies characterized by ex situ helium ion microscopy. The initial variation in the (Ψ,Δ) parameters appears to be governed by small changes in surface roughness (<50 nm) produced by helium bubble nucleation and growth, followed by the emergence of 50 nm diameter W tendrils. This basic behavior appears to be reproducible over a wide parameter space, indicating that the spectroscopic ellipsometry may be of general practical use as a diagnostic to study surface morphologies produced by high-flux He implantation in refractory metals. An advantage of the methods outlined here is that they are applicable at low incident ion energies, even below the sputtering threshold. As an example of this application, we apply in situ ellipsometry to examine how W fuzz growth is affected both by varying ion energy and the temperature of the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Origins and Implications of Interfacial Capacitance Enhancements in C 60 -Modified Graphene Supercapacitors

Understanding and controlling the electrical response at a complex electrode–electrolyte interface is key to the development of next-generation supercapacitors and other electrochemical devices. In this work, we apply a theoretical framework based on the effective screening medium and reference interaction site model to explore the role of electrical double-layer (EDL) formation and its interplay with quantum capacitance in graphene-based supercapacitors. In addition to pristine graphene, we investigate a novel C60-modified graphene supercapacitor material, which promises higher charge-storage capacity. Beyond the expected enhancement in the quantum capacitance, we find that the introduction of C60 molecules significantly alters the EDL response. These changes in EDL are traced to the interplay between surface morphology and charge localization character and ultimately dominate the overall capacitive improvement in the hybrid system. Our study highlights a complex interplay among surface morphology, electronic structure, and interfacial capacitance, suggesting general improvement strategies for optimizing carbon-based supercapacitor materials.

36 MATERIALS SCIENCE↗

Correlation of chemical composition and electrical properties of rf sputtered alumina films

Alumina films were prepared by radio frequency magnetron sputtering from an aluminum oxide target on an indium tin oxide covered glass. The purpose of the study was to test the influence of the sputter parameters on the elemental composition, surface morphology, and electrical insulation properties (breakdown fields and leakage currents). Tested parameters were the sputter gas (Ar) pressure, the sputter rate, the sputter power, the sputter gas composition (Ar:O{sub 2}), the conditioning of the target, the residual base pressure, and the substrate temperature. The surface morphology of the films was investigated by atomic force microscopy. Depth profiles of the elemental compositions were measured by elastic recoil detection using energetic heavy ions, and the insulation properties were investigated by current voltage measurements and impedance spectroscopy. The main finding is that the leakage currents increase by about five orders of magnitude, if the atomic ratio of O:Al increases from 1.35 to 2.0. In parallel the breakdown fields decrease by a factor of 100, and the character of the breakdowns changes from soft to hard. The highest breakdown fields (2.4 MV/cm) and smallest leakage currents (6.5x10{sup -8} A/cm{sup 2} at 2.0 MV/cm) are obtained for slightly Al rich films with small atomic concentrations of H (<0.5 at. %). These films were sputtered in pure Ar and under the lowest possible pressure of the residual gas.

36 MATERIALS SCIENCE↗

Surface, structural and mechanical properties of zirconium ablated by KrF excimer laser radiation

We study the effect of the ambient – dry (air) and wet (propanol) – environment on the surface, structural and mechanical properties of zirconium samples after irradiation with a KrF excimer laser (wavelength of 248 nm, pulse duration of 20 ns and repetition rate of 20 Hz). The samples are exposed to an increasing number of laser pulses varying from 500 to 2000 in both media. Various features of the treated targets such as surface morphology, chemical composition, crystalline structure and hardness are analysed by complementary characterisation techniques, such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and Vickers hardness tester, respectively. Surface morphology and hardness are explained on the basis of modifications in crystalinity, residual pressures and chemical properties of the sample surface after its irradiation. (interaction of laser radiation with matter)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Annealing temperature and thickness dependence of magnetic properties in epitaxial L1{sub 0}-Mn{sub 1.4}Ga films

Mn{sub 1.4}Ga films with high perpendicular magnetic anisotropy and high crystalline quality were grown on MgO substrates with Cr buffer layer using molecular beam epitaxy. The crystalline structure and the surface morphology of the films have been systematically investigated as functions of in-situ annealing temperature (T{sub a}) and film thickness. It is found that the magnetic properties can be largely tuned by adjusting T{sub a}. As T{sub a} increases, both saturation magnetization (M{sub s}) and uniaxial perpendicular magnetic anisotropy constant (K{sub u}) increase to the maximum values of 612 emu/cc and 18 Merg/cc at 300 °C, respectively, and then decrease. The morphology also changes with T{sub a}, showing a minimum roughness of 2.2 Å at T{sub a} = 450 °C. On the other hand, as the thickness increases, M{sub s} and K{sub u} increase while coercivity decreases, which indicates there is a magnetic dead layer with a thickness of about 1.5 nm at the interfaces. The detailed examination on the surface morphology of the films with various thicknesses shows a complicated film growth process, which can be understood from the relaxation mechanism of the interfacial strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium and impurity incorporation in InGaN films on polar, nonpolar, and semipolar GaN orientations grown by ammonia molecular beam epitaxy

The effects of NH{sub 3} flow, group III flux, and substrate growth temperature on indium incorporation and surface morphology have been investigated for bulk InGaN films grown by ammonia molecular beam epitaxy. The incorporation of unintentional impurity elements (H, C, O) in InGaN films was studied as a function of growth temperature for growth on polar (0001) GaN on sapphire templates, nonpolar (1010) bulk GaN, and semipolar (1122), (2021) bulk GaN substrates. Enhanced indium incorporation was observed on both (1010) and (2021) surfaces relative to c-plane, while reduced indium incorporation was observed on (1122) for co-loaded conditions. Indium incorporation was observed to increase with decreasing growth temperature for all planes, while being relatively unaffected by the group III flux rates for a 1:1 Ga:In ratio. Indium incorporation was found to increase at the expense of a decreased growth rate for higher ammonia flows; however, smooth surface morphology was consistently observed for growth on semipolar orientations. Increased concentrations of oxygen and hydrogen were observed on semipolar and nonpolar orientations with a clear trend of increased hydrogen incorporation with indium content.

36 MATERIALS SCIENCE↗

3D-Printable Fluoropolymer Gas Diffusion Layers for CO 2 Electroreduction

The electrosynthesis of value-added multicarbon products from CO 2 is a promising strategy to shift chemical production away from fossil fuels. Particularly important is the rational design of gas diffusion electrode (GDE) assemblies to react selectively, at scale, and at high rates. However, the understanding of the gas diffusion layer (GDL) in these assemblies is limited for the CO 2 reduction reaction (CO 2 RR): particularly important, but incompletely understood, is how the GDL modulates product distributions of catalysts operating in high current density regimes > 300 mA cm -2 . Here, 3D-printable fluoropolymer GDLs with tunable microporosity and structure are reported and probe the effects of permeance, microstructural porosity, macrostructure, and surface morphology. Under a given choice of applied electrochemical potential and electrolyte, a 100× increase in the C 2 H 4 :CO ratio due to GDL surface morphology design over a homogeneously porous equivalent and a 1.8× increase in the C 2 H 4 partial current density due to a pyramidal macrostructure are observed. Overall, these findings offer routes to improve CO 2 RR GDEs as a platform for 3D catalyst design.

36 MATERIALS SCIENCE↗