Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A review: Quantitative models for lava flows on Mars

The purpose of this abstract is to review and assess the application of quantitative models (Gratz numerical correlation model, radiative loss model, yield stress model, surface structure model, and kinematic wave model) of lava flows on Mars. These theoretical models were applied to Martian flow data to aid in establishing the composition of the lava or to determine other eruption conditions such as eruption rate or duration.

Baloga, S. M.↗

Knox-Thompson images of 4 Vesta

Reconstructed images of the asteroid 4 Vesta reveal dark and bright patterns which can be followed across the disk as the asteroid rotates. Reasonable agreement is found with its visible light curve by assigning relative albedo 0 to the three darkest features, and relative albedo 2 to the three brightest features. From power-spectrum analysis of sets of images at two different epochs, Vesta's triaxial principal diameters, the orientation of its pole, and its rotational rate and sense are obtained. The images confirm the dominant role of surface structure, particularly the dark spots, in determining Vesta's light-curve signature.

Drummond, J. D.↗

Optical Backplane Interconnect Technology (OBIT)

We describe and analyze a novel approach to implementing an Optical Backplane Interconnect Technology (OBIT) that is capable of optically connecting any row of a 32x32 backplane array to any row of a second 32x32 array. Each backplane array is formed monolithically on a wafer. The technology is based on the use of Grating Surface Emitting (GSE) waveguides formed on a wafer containing quantum-well and separate confinement waveguide layers. These layers are used for transverse guiding, gain, modulation, detection, and for the formation of wavelength tunable distributed-Bragg reflector lasers. The required surface structures are formed photolithographically. The GSE waveguides act as efficient antennae that radiate light at angles selected by tuning the wavelength of the lasers. The same waveguides may be used as the receiving antennae when the array is used in the receiving mode. Thus, wavelength tuning is used to direct each row of the transmitting array to the desired row of the receiving array. In summary: The optical backplane array will have the following characteristics: Any row of a 32x32 GSE array may be optically connected to any row of a second 32x32 array. Only one switch decision is required to switch 32 parallel connections to any one of 32 positions. Each monolithic array can be used as both transmitter and receiver by switching the bias on the quantum-well switch-detectors. Separate transmitting and receiving structures could be provided for duplex operation. For a bit error rate of 10 sup 9 at 100-MHz data rate, a required laser power of 12 mW is calculated based on an estimated total optical loss of 40 dB.

Hammer, J. M.↗

A new structure for comparing surface passivation materials of GaAs solar cells

The surface recombination velocity (S sub rec) for bare GaAs is typically as high as 10 to the 6th power to 10 to the 7th power cm/sec, which dramatically lowers the efficiency of GaAs solar cells. Early attempts to circumvent this problem by making an ultra thin junction (xj less than .1 micron) proved unsuccessful when compared to lowering S sub rec by surface passivation. Present day GaAs solar cells use an GaAlAs window layer to passivate the top surface. The advantages of GaAlAs in surface passivation are its high bandgap energy and lattice matching to GaAs. Although GaAlAs is successful in reducing the surface recombination velocity, it has other inherent problems of chemical instability (Al readily oxidizes) and ohmic contact formation. The search for new, more stable window layer materials requires a means to compare their surface passivation ability. Therefore, a device structure is needed to easily test the performance of different passivating candidates. Such a test device is described.

Desalvo, Gregory C.↗

ECLS systems for a lunar base - A baseline and some alternate concepts

A baseline ECLS system for a lunar base manned intermittently by four crewmembers and later permanently occupied by eight crewmembers has been designed. A summary of the physical characteristics for the intermittently manned and the continuously manned bases is given. Since Space Station inheritance is a key assumption in the mission models, the ECLS system components are distributed within Space Station modules and nodes. A 'core assembly' concept is then developed to meet the objectives of both phases of the ECLS system. A supplementary study is discussed which assessed tankage requirements, penalties incurred by adding subsystem redundancy and by pressurizing large surface structures, and difficulties imposed by intermittent occupancy. Alternate concepts using lunar-derived oxygen, the gravitational field as a design aid, and a city utility-type ECLS system are also discussed.

Hypes, Warren D.↗

Lockheed laminar-flow control systems development and applications

Progress is summarized from 1974 to the present in the practical application of laminar-flow control (LFC) to subsonic transport aircraft. Those efforts included preliminary design system studies of commercial and military transports and experimental investigations leading to the development of the leading-edge flight test article installed on the NASA JetStar flight test aircraft. The benefits of LFC on drag, fuel efficiency, lift-to-drag ratio, and operating costs are compared with those for turbulent flow aircraft. The current activities in the NASA Industry Laminar-Flow Enabling Technologies Development contract include summaries of activities in the Task 1 development of a slotted-surface structural concept using advanced aluminum materials and the Task 2 preliminary conceptual design study of global-range military hybrid laminar flow control (HLFC) to obtain data at high Reynolds numbers and at Mach numbers representative of long-range subsonic transport aircraft operation.

Lange, Roy H.↗

Local parallel models for integration of stereo matching constraints and intrinsic image combination

Parallel relaxation computations such as those of connectionist networks offer a useful model for constraint integration and intrinsic image combination in developing a general-purpose stereo matching algorithm. This paper describes such a stereo algorithm that incorporates hierarchical, surface-structure, and edge-appearance constraints that are redefined and integrated at the level of individual candidate matches. The algorithm produces a high percentage of correct decisions on a wide variety of stereo pairs. Its few errors arise when the correlation measures defined by the constraints are either weakened or ambiguous, as in the case of periodic patterns in the images. Two additional mechanisms are discussed for overcoming the remaining errors.

Stewart, Charles V.↗

Three-dimensional kinematic reconnection in the presence of field nulls and closed field lines

The present investigation of three-dimensional reconnection of magnetic fields with nulls and of fields with closed lines gives attention to the geometry of the former, with a view to their gamma-line and Sigma-surface structures. The geometric structures of configurations with a pair of type A and B nulls permit reconnection across the null-null lines; these are the field lines which join the two nulls. Also noted is the case of magnetostatic reconnection, in which the magnetic field is time-independent and the electrostatic potential is constant along field lines.

Lau, Yun-Tung↗

Interactive wall turbulence control

After presenting boundary layer turbulence physics in a manner that emphasizes the possible modification of structural surfaces in a way that locally alters the production of turbulent flows, an account is given of the hardware that could plausibly be employed to implement such a turbulence-control scheme. The essential system components are flow sensors, electronic processors, and actuators; at present, actuator technology presents the greatest problems and limitations. High frequency/efficiency actuators are required to handle three-dimensional turbulent motions whose frequency and intensity increases in approximate proportion to freestream speed.

Wilkinson, Stephen P.↗

Coagulation of particles in Saturn's rings - Measurements of the cohesive force of water frost

Experimental data are presented on the sticking force of water ice particles which are indicative of the role that the cohesive properties of such particles could play in the dynamics of Saturn ring particles. Sticking forces are dependent on particle impact velocities; a 'Velcro' model is devised to describe the surface structure involved in sticking. The data indicate that below the critical impact velocity of about 0.03 cm/sec, particle cohesion always occurs. Due to the optical depth of micron-sized grains in the Saturn rings, particles are hypothesized to be coated with a layer of frost which will render cohesion an important ring-dynamics process.

Hatzes, A. P.↗

Diffractive optics technology and the NASA Geostationary Earth Observatory (GEO)

Diffractive (or binary) optics offers unique capabilities for the development of large-aperture, high-performance, light-weight optical systems. The Geostationary Earth Observatory (GEO) will consist of a variety of instruments to monitor the environmental conditions of the earth and its atmosphere. The aim of this investigation is to analyze the design of the GEO instrument that is being proposed and to identify the areas in which diffractive (or binary) optics technology can make a significant impact in GEO sensor design. Several potential applications where diffractive optics may indeed serve as a key technology for improving the performance and reducing the weight and cost of the GEO sensors have been identified. Applications include the use of diffractive/refractive hybrid lenses for aft-optic imagers, diffractive telescopes for narrowband imaging, subwavelength structured surfaces for anti-reflection and polarization control, and aberration compensation for reflective imaging systems and grating spectrometers.

Morris, G. Michael↗

A video-aided study of sea spikes in radar backscatter at moderate incidence

Backscatter from a lake was measured at a 37-deg incidence angle using an FM-CW radar operating on X band and C band simultaneously. A limited amount of Ka-band data was also collected at 50 deg incidence. A video camera recorded the activity within the footprint looking upwind and crosswind. The video showed that breaking waves at all look directions and wedge-shaped waves when looking upwind consistently produced spikes in the radar time series. However, 62 percent to 90 percent of the spikes were not attributable to any surface structure visible on the video picture except wave crests. These spikes may be due to specular reflections or micro-scale breaking too small to be seen. Individual contributions to the backscattering coefficient were calculated for unattributed spikes, breaker spikes, and wedge spikes.

Bush, Daniel A.↗

In-step Inflatable Antenna Experiment

The topics are presented in viewgraph form and include the following: potential space antenna applications; experiment objectives; experiment technical approach; experiment scenario; spartan services; experiment orbital configuration; experiment canister structure; surface measurement system configuration; and orbital functional sequences.

Veal, G.↗

A prediction of Mars seismicity from surface faulting

The shallow seismicity of Mars has been estimated by measurement of the total slip on faults visible on the surface of the planet throughout geologic time. Seismicity was calibrated with estimates based on surface structures on the moon and measured lunar seismicity that includes the entire seismogenic lithosphere. Results indicate that Mars is seismically active today, with a sufficient number of detectable marsquakes to allow seismic investigations of its interior.

Golombek, Matthew P.↗

Power systems for the Mars Environmental Survey (MESUR) Mission

Mars Environmental Survey Mission (MESUR) is intended to be a low cost, near term mission to study the chemical composition of Martian surface, structure and circulation of Mars' atmosphere, and the structure and dynamics of Mars' interior. To meet the science objectives of the mission, a network of 16 landers will be placed at various latitudes and longitudes of Mars. The paper identifies various options for powering the landers and lists the attributes of each option. The current strategy is to precede the lander launch and deployment with an engineering demo mission called the Pathfinder which would demonstrate the landing strategy and the engineering subsystems. The paper briefly describes the challenges involved in the power system development for the Pathfinder mission.

Shirbacheh, Mike↗

Near-ultraviolet imaging of Jupiter's satellite Io with the Hubble Space Telescope

The surface of Jupiter's Galilean satellite Io has been resolved for the first time in the near ultraviolet at 2850 A by the Faint Object Camera (FOC) on the Hubble Space Telescope (HST). The restored images reveal significant surface structure down to the resolution limit of the optical system corresponding to approximately 250 km at the sub-earth point.

Paresce, F.↗

Hot hydrogen testing of metallic turbo pump materials

The objectives of this investigation are to expose heat resistant alloys to hydrogen at elevated temperatures and to use various microstructural and analytical techniques to determine the chemical and rate process involved in degradation of these materials due to hydrogen environment. Inconel 718 and NASA-23 (wrought and cast) are candidate materials. The degradation of these materials in the presence of 1 to 5 atmospheric pressure of hydrogen from 450 C to 1100 C was examined. The hydrogen facility at Auburn University was used for this purpose. Control experiments were also conducted wherein the samples were exposed to vacuum so that a direct comparison of the results would separate the thermal contribution from the hydrogen effects. The samples were analyzed prior to and after exposure. A residual gas collection system was used to determine the gaseous species produced by any chemical reaction that may have occurred during the exposure. Analysis of this gas sample shows only the presence of H2 as expected. Analyses of the samples were conducted using optical microscopy, x-ray diffraction, scanning electron microscopy, and weight change. There appears to be no change in weight of the samples as a result of hydrogen exposure. In addition no visible change on the surface structure was detected. This indicates that the materials of interest do not have strong interaction with hot hydrogen. This is consistent with the microstructure results.

Zee, Ralph↗

Near surface analysis

This is a study to assist in the understanding of earth near surface structure. Higher order moments are used to detect the density distribution as well as to seek patterns found in geological structures. It is shown how higher order moments at points outside a mass structure are determined as well as how to recover the mass distribution from the higher order moments. It is interesting to note that the first moment at a point P outside the mass structure, V(sub O)(P), is the entire mass and the second moment, V(sub 1)(P), is the potential at P due to the mass structure. Usually only the mass and the potential function are used to determine the density distribution in a body. An infinite function sequence (V(sub n)(P))(sub n=0)(sup infinity) is required to uniquely determine the density distribution.

Johnson, Gordon G.↗