Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Arsenic solid-phase partitioning in reducing sediments of a contaminated wetland

The geochemical partitioning of arsenic in organic-rich sediments from a contaminated wetland is examined using X-ray absorption spectroscopy and selective chemical extraction procedures, and evaluated in context to the anoxic diagenesis of iron and sulfur. The interaction between ground water and surface water has a significant influence on iron sulfide formation in the wetland sediments. Ground-water seeps supply concentrations of sulfate, dissolved hydrocarbons, ferrous iron, and arsenic, and sediments located near seeps are anomalously enriched in arsenic, reactive iron, and acid-volatile sulfides. Degree-of-sulfidation (DOS) values are high in sediments adjacent to sites of ground-water discharge, ranging from 0.57 to 1.0. Pyrite (FeS{sub 2}) formation is apparently not limited by the abundance of any one primary reactant, e.g., organic carbon, sulfate, or reactive iron; instead, persistence of precursor iron monosulfides is attributed to slow pyrite formation kinetics due to low concentrations of reactive intermediate sulfur species or possibly due to high concentrations of arsenite, dissolved organic-carbon, or other solutes that adsorb to iron monosulfides surfaces and impede transformation reactions to pyrite. Greigite (Fe{sub 3}S{sub 4}) accounts for > 80% of total reduced sulfur in sediments rich in acid-volatile sulfide and X-ray absorption spectroscopy data for magnetic separates provide direct evidence that As(III) is, at least in part, associated with reduced sulfur in the form of greigite. However, pyrite can only account for a small percentage, < 20%, of the total arsenic budget in the reduced sediments. Although pyrite is the predicted stable endpoint for reactive iron and sulfur, it appears that within a 30 y time period pyrite is a relatively unimportant host for arsenic in the system investigated here. The abundance of reactive iron in the sediments prevents accumulation of dissolved sulfide and thus prevents formation of soluble thioarsenic species. X-ray absorption near-edge structure (XANES) spectroscopy indicates only the presence of As(III) in the reduced sediments. Results of linear combination fitting of reference spectra to sediment spectra are consistent with sulfur- and/or oxygen-coordinated As(III) in association with iron monosulfides and ferrous-bearing carbonates or hydroxides.

54 ENVIRONMENTAL SCIENCES↗

Mechanistic Transformation of CuI Nanoparticles Into Oxidation‐Resistant 2D Copper Nanoplates

Unconventional phase transformations reveal new crystallization mechanisms, yet direct observation of such pathways during nanoscale solution-phase synthesis remains challenging. This study uncovers an atypical growth process in which thermodynamically stable CuI nanoparticles (NPs) transform into high-energy 2D Cu plates. Using a combination of in situ transmission electron microscopy, ex situ structural analysis, and density functional theory calculations shows that the formation of structural defects induced by hexadecylamine and chloride ions facilitates the transformation by promoting surface iodine vacancies. The resulting Cu{111} nanoplates, with ultrathin thicknesses (≈4 nm) and exceptionally high aspect ratios (≈450), display enhanced oxidation resistance and long-term stability under ambient conditions. This resistance is attributed to the close-packed {111} facets, which suppress chemical oxidation even after extended exposure to air over 100 days. These findings provide new insights into non-classical crystallization pathways in metal nanomaterials and suggest a versatile approach for preparing oxidation-resistant, structurally defined Cu nanostructures.

36 MATERIALS SCIENCE↗

Photoinduced Electron and Energy Transfer Pathways and Photocatalytic Mechanisms in Hybrid Plasmonic Photocatalysis

Hybrid plasmonic nanostructures are built on plasmonic metalnanostructures surrounded by catalytic metals or metal oxides. We report that recent studies have shown that hybrid plasmonic nanocatalysts can concurrently utilize thermal energy and photon stimuli and exhibit high catalytic activity, selectivity, and stability that are not attainable in conventional purely thermally activated catalytic processes. The hybrid plasmonic photocatalytic approach has recently emerged as an attractive concept for the conversion of solar energy into chemical energy, the distributed synthesis of valuable chemicals such as ammonia with little to no requirement of external heating, and the development of coke-resistant and selective catalytic processes. The field of hybrid plasmonic photocatalysis has grown tremendously in the last decade. In this review article, the advantages of visible-light-augmented hybrid plasmonic photocatalysis over conventional pure thermally activated heterogeneous catalysis are discussed. Fundamental insights are provided into photocatalytic mechanisms by which the photoexcited charge carriers (electrons and holes) are formed and transferred to adsorbates triggering chemical transformations on the surface of hybrid plasmonic nanocatalysts. Computational modeling used for predicting and understanding the photocatalytic activity and selectivity on hybrid plasmonic nanostructures is also reviewed. The review closes with a discussion of the current challenges, new opportunities, and future outlook for hybrid plasmonic photocatalysis.

36 MATERIALS SCIENCE↗

Electron energy levels determining cathode electrolyte interphase formation

Cathode electrolyte interphase (CEI) has a significant impact on the performance of rechargeable batteries and is gaining increasing attention. Understanding the fundamental and detailed CEI formation mechanism is of critical importance for battery chemistry. Herein, a diverse of characterization tools are utilized to comprehensively analyze the composition of the CEI layer as well as its formation mechanism by LiCoO 2 (LCO) cathode. We reveal that CEI is mainly composed of the reduction products of electrolyte and it only parasitizes the degraded LCO surface which has transformed into a disordered spinel structure due to oxygen loss and lithium depletion. Based on the energy diagram and the chemical potential analysis, the CEI formation process has been well explained, and the proposed CEI formation mechanism is further experimentally validated. This work highlights that the CEI formation process is nearly identical to that of the anode-electrolyte-interphase, both of which are generated due to the electrolyte directly in contact with the low chemical potential electrode material. This work can deepen and refresh our understanding of CEI.

LiCoO2↗

Evidence of plasma‐driven decomposition of common plastics exposed to an atmospheric nonthermal discharge

Abstract A nonthermal, pulsed spark discharge is applied to three polymer powders in Ar and Ar– gas mixtures. Hydrogen is introduced to assess plasma‐driven decomposition. Gaseous decomposition products, including methane, acetylene, and ethylene, are observed with Fourier‐transform infrared (FTIR). Surface modifications are observed on the residual polymer via attenuated total internal reflection‐FTIR. Time‐averaged rotational, vibrational, and excitation temperatures are characterized in the discharge. The plasma density is found to be around , with rotational and vibrational temperatures ranging from 1500 to 2200 K and an excitation temperature of 1–2 eV. While spark properties did not change with either gas composition or polymer composition, it was determined that the addition of hydrogen promoted higher concentrations of gaseous phase products (promoting hydrogenolysis).

36 MATERIALS SCIENCE↗

Synchrotron Radiation in Analysis of Structural Transformations Under Friction Conditions of Carbon Steel

The paper presents results of the structural transformations in the surface of carbon steel specimens during the first tens of cycles of the friction loading with a hard-alloy indenter. The widespread type AISI 1020 carbon steel is used in the experiments which are carried out on the Microfocus Beamline ID13 of the European Synchrotron Radiation Facility. The experimental setup is designed to record the diffraction patterns during the friction. It is shown that at the initial stage of friction, the diffraction maxima significantly broaden due to the defect accumulation in the crystal lattice and, as a consequence, the growth in elastic micro-distortions and the size reduction of the coherent scattering areas. A serious increase is observed in the intensity of reflection from planes of {110} family due to the formation of the respective texture in the surface layers of steel specimens. A non-destructive method is used to detect the diffraction patterns both for non-moving and moving specimens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of Al/Steel Tungsten Inert Gas Welding–Brazing Joint by High-Energy Shot Peening

High-energy shot peening treatment was applied to improve the Al/steel tungsten inert gas welding–brazing lap joint. The mechanical properties and microstructure evolution of the joint were investigated. Results showed that the mechanical properties of weld were evidently reinforced due to microstructure transformation of joint surface layer. The grain structure in the joint surface layer was distorted and refined. Large compressive residual stress was introduced into the joint surface, and its hardness obviously increased due to strain hardening. When the peening pressure was 0.15 MPa, the tensile shear strength of the joint reached the maximum value (199.6 MPa), which was 16.5% higher than that of the as-welded joint.

36 MATERIALS SCIENCE↗

Metallic phases of cobalt-based catalysts in ethanol steam reforming: The effect of cerium oxide

The catalytic activity of cobalt in the production of hydrogen via ethanol steam reforming has been investigated in its relation to the crystalline structure of metallic cobalt. At a reaction temperature of 350 8C, the specific hydrogen production rates show that hexagonal close-packed (hcp) cobalt possesses higher activity than face-centered cubic (fcc) cobalt. However, at typical reaction temperatures (400– 500 8C) for ethanol steam reforming, hcp cobalt is transformed to less active fcc cobalt, as confirmed by in situ X-ray diffractometry (XRD). The addition of CeO2 promoter (10 wt.%) stabilizes the hcp cobalt structure at reforming temperatures up to 600 8C. Moreover, during the pre-reduction process, CeO2 promoter prevents sintering during the transformation of Co3O4 to hcp cobalt. Both reforming experiments and in situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) showed that the surface reactions were modified by CeO2 promoter on 10% Ce–Co (hcp) to give a lower CO selectivity and a higher H2 yield as compared with the unpromoted hcp Co.

08 HYDROGEN↗

Preparation of novel Sb{sub 2}O{sub 3}/WO{sub 3} photocatalysts and their activities under visible light irradiation

Highlights: ► Visible-light-driven Sb{sub 2}O{sub 3}/WO{sub 3} photocatalysts were synthesized. ► Results showed that RhB can be decomposed using a 4 W LED lamp as visible light. ► The coupling of Sb{sub 2}O{sub 3} and WO{sub 3} enhanced the photocatalytic activity of WO{sub 3}. - Abstract: Novel visible-light-driven Sb{sub 2}O{sub 3}/WO{sub 3} photocatalysts were prepared by a hydrothermal synthesis followed by heat treatment, and characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), BET surface area, Fourier transform infrared spectroscopy (FT-IR) and photoluminescence spectra (PL). The photocatalytic activities of Sb{sub 2}O{sub 3}/WO{sub 3} photocatalysts were evaluated by the rhodamine B degradation using a LED lamp as visible light irradiation. Compared with pure WO{sub 3} and Sb{sub 2}O{sub 3}, the significantly enhanced photocatalytic activities of the Sb{sub 2}O{sub 3}/WO{sub 3} composite particles are attributed to the decrease of the recombination rate of photoinduced electron–hole pairs due to the coupling of Sb{sub 2}O{sub 3} and WO{sub 3} within the composite nanoparticles. Studies of Sb{sub 2}O{sub 3}/WO{sub 3} composites indicate that one approach to design composite materials with enhanced photocatalytic performance is through coupling Sb{sub 2}O{sub 3} with WO{sub 3}, which the lowest energy states for electrons and holes are in different semiconductors.

36 MATERIALS SCIENCE↗

Reduced graphene oxide and vertically aligned carbon nanotubes superhydrophilic films for supercapacitors devices

Graphical abstract: - Highlights: • Graphene nanosheets were produced onto wire rods. • RGO and VACNT-O were evaluated and compared as supercapacitor electrode. • RGO and VACNT-O have structural and electrochemical properties quite similars. • The materials present good specific capacitance, energy storage and power delivery. - Abstract: Reduced graphene oxide (RGO) and vertically aligned carbon nanotubes (VACNT) superhydrophilic films were prepared by chemical vapor deposition techniques for electrical energy storage investigations. These electrodes were characterized in terms of their material and electrochemical properties by scanning electron microscopy (SEM), surface wettability, Fourier transform infrared spectroscopy (FTIR), energy dispersive and Raman spectroscopies, cyclic voltammetry (CV) and galvanostatic charge–discharge. We observed several physical structural and electrochemical similarities between these carbon-based materials with particular attention to very good specific capacitance, ultra-high energy storage and fast power delivery. Our results showed that the main difference between specific capacitance values is attributed to pseudocapacitive contribution and high density of multiwall nanotubes tips. In this work we have tested a supercapacitor device using the VACNT electrodes.

36 MATERIALS SCIENCE↗

Canonical Approach To Generate Multidimensional Potential Energy Surfaces

A new force-based canonical approach for the accurate generation of multidimensional potential energy surfaces is demonstrated. Canonical transformations previously developed for diatomic molecules are used to construct accurate approximations to the 3-dimensional potential energy surface of the water molecule from judiciously chosen (adopting the right coordinate system) 1-dimensional planar slices that are shown to have the same canonical shape as the classical Lennard-Jones potential curve. Spline interpolation is then used to piece together the 1-dimensional canonical potential curves, to obtain the full 3-dimensional potential energy surface of a water molecule with a relative error less than 0.01. This work provides an approach to greatly reduce the computational cost of constructing potential energy surfaces in molecules from ab initio calculations. The canonical transformation techniques developed in this work illuminate a pathway to deepening our understanding of chemical bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Resonance Theory: Forecasting the Flow of Programmable Catalytic Loops

Chemical transformations on catalyst surfaces occur through series and parallel reaction pathways. These complex networks and their behavior can be most simply evaluated through a three-species surface reaction loop (A* to B* to C* to A*) that is internal to the overall chemical reaction. Application of an oscillating dynamic catalyst to this reactive loop has been shown to exhibit one of three types of behavior: (1) a positive net flux of molecules about the loop in the clockwise direction, (2) a negative net flux of molecules about the loop in the counterclockwise direction, or (3) negligible flux of molecules about the loop at the limit cycle of reaction. Three-species surface loops were simulated with microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more catalyst surface energy states. Selected input parameters for the simulations spanned an 11-dimensional parameter space using 127 688 different parameter combinations. Their converged limit cycle solutions were analyzed for their loop turnover frequencies, the majority of which were found to be approximately zero. Classification and regression machine learning models were trained to predict the sign and magnitude of the loop turnover frequency and successfully performed above accessible baselines. Notably, the classification models exhibited a baseline weighted F1 score of 0.49, whereas trained models achieved weighted F1 scores of 0.94 and 0.96 when trained on the parameters used to define the simulations and derived rate constants, respectively. The trained models successfully predicted catalytic loop behavior, and interpretation of these models revealed all input parameters to be important for the prediction and performance of each model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calculation of ultrasonic fields radiated in a ferromagnetic medium by an EMAT of arbitrary bias field driven by a current of arbitrary intensity

ElectroMagnetic Acoustic Transducers (EMATs) are contactless transducers generating ultrasonic waves in conductive media, notably shear horizontal and torsional waves (in plates and pipes, respectively), possibly in hostile environments. In a ferromagnetic part, the elastic strain and the magnetic field couple through magnetostriction phenomena, so that a magnetostriction and magnetization forces add up to the Lorentz force created in any conductive medium. Here, a model is proposed to predict these forces for an arbitrary bias field due to the EMAT permanent magnet and whatever the current intensity in its electric circuit, whereas the usual assumption of high bias field and low intensity current leads to important model simplifications. To handle the nonlinear behavior of all the three forces when the usual assumption cannot be made, forces are expressed in the time domain. In particular, magnetostriction force generates waves at several harmonic frequencies of the driving current frequency. Forces are then transformed into equivalent surface stresses readily usable as source terms in existing models of ultrasonic radiation, under the assumption that ultrasonic wavelengths are much longer than force penetration depths, (which is generally true in NDT applications of EMATs). Force spectra computed in various EMAT configurations are compared for illustration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-decorated Au nanoparticles on antireflective Si pyramids with improved hydrophobicity

Post-deposition annealing mediated evolution of self-decorated Au nanoparticles (NPs) on chemically etched Si pyramids is presented. A distinct transformation of Si surfaces from hydrophilic to hydrophobic is initially found after chemical texturing, showing an increase in contact angle (CA) from 58° to 98° (±1°). Further improvement of hydrophobicity with CA up to ∼118° has been established after annealing a 10 nm thick Au-coated Si pyramids at 400 °C that led to the formation of Au NPs on Si facets along with self-ordering at the pyramid edges. Detailed x-ray diffraction studies suggest the evolution of crystalline Au NPs on strained Si facets. Microstructural studies, however, indicate no mixing of Au and Si atoms at the Au/Si interfaces, instead of forming Au nanocrystals at 400 °C. The improved hydrophobicity of Si pyramids, even with Au NPs can be explained in the light of a decrease in solid fractional surface area according to Wenzel's model. Moreover, a sharp drop in specular reflectance from Si pyramids in the range of 300–800 nm, especially in the ultraviolet region up to ∼0.4% is recorded in the presence of Au NPs by ultraviolet-visible spectroscopy, reflecting the possible use in photovoltaic devices with improved antireflection property.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The two-dimensional kinetic ballooning theory for ion temperature gradient mode in tokamak

The two-dimensional (2D) kinetic ballooning theory is developed for the ion temperature gradient mode in an up-down symmetric equilibrium (illustrated via concentric circular magnetic surfaces). The ballooning transform converts the basic 2D linear gyro-kinetic equation into two equations: (1) the lowest order equation (ballooning equation) is an integral equation essentially the same as that reported by Dong et al., [Phys. Fluids B 4, 1867 (1992)] but has an undetermined Floquet phase variable, (2) the higher order equation for the rapid phase envelope is an ordinary differential equation in the same form as the 2D ballooning theory in a fluid model [Xie et al., Phys. Plasmas 23, 042514 (2016)]. The system is numerically solved by an iterative approach to obtain the (phase independent) eigen-value. The new results are compared here to the two earlier theories. We find a strongly modified up-down asymmetric mode structure, and non-trivial modifications to the eigen-value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular fouling resistance of zwitterionic and amphiphilic initiated chemically vapor-deposited (iCVD) thin films

Biofouling is a universal problem in various applications ranging from water purification to implantable biomedical devices. Recent advances in surface modification have created a rich library of antifouling surface chemistries, many of which can be categorized into one of the two groups: hydrophilic surfaces or amphiphilic surfaces. We report the straightforward preparation of antifouling thin film coatings in both categories via initiated chemical vapor deposition. A molecular force spectroscopy-based method is demonstrated as a rapid and quantitative assessment tool for comparing the differences in antifouling characteristics. The fouling propensity of single molecules, as opposed to bulk protein solution or bacterial culture, is assessed. This method allows for the interrogation of molecular interaction without the complication resulted from protein conformational change or micro-organism group interactions. The molecular interaction follows the same trend as bacterial adhesion results obtained previously, demonstrating that molecular force probe is a valid method for the quantification and mechanistic examination of fouling. In addition, the molecular force spectroscopy-based method is able to distinguish differences in antifouling capability that is not resolvable by traditional static protein adsorption tests. To lend further insight into the intrinsic fouling resistance of zwitterionic and amphiphilic surface chemistries, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, advancing and receding water contact angles, and atomic force microscopy are used to elucidate the film properties that are relevant to their antifouling capabilities.

Yang, R↗

Crystal growth, microstructure, and physical properties of SrMnSb 2

We report on the crystal and magnetic structures, magnetic, and transport properties of SrMnSb 2 single crystals grown by the self-flux method. Magnetic susceptibility measurements reveal an antiferromagnetic (AFM) transition at T N = 295(3) K. Above T N , the susceptibility slightly increases and forms a broad peak at T ~ 420 K, which is a typical feature of two-dimensional magnetic systems. Neutron diffraction measurements on single crystals confirm the previously reported C-type AFM structure below T N . Both de Haas-van Alphen (dHvA) and Shubnikov-de Haas (SdH) effects are observed in SrMnSb2 single crystals. Analysis of the oscillatory component by a Fourier transform shows that the prominent frequencies obtained by the two different techniques are practically the same within error regardless of sample size or saturated magnetic moment. Transmission electron microscopy (TEM) reveals the existence of stacking faults in the crystals, which result from a horizontal shift of Sb atomic layers suggesting possible ordering of Sb vacancies in the crystals. Increase of temperature in susceptibility measurements leads to the formation of a strong peak at T ~ 570 K that upon cooling under magnetic field the susceptibility shows a ferromagnetic transition at T C ~ 580 K. Neutron powder diffraction on crushed single-crystals does not support an FM phase above T N . Furthermore, X-ray magnetic circular dichroism (XMCD) measurements of a single crystal at the L 2,3 edge of Mn shows a signal due to induced canting of AFM moments by the applied magnetic field. All evidence strongly suggests that a chemical transformation at the surface of single crystals occurs above 500 K concurrently producing a minute amount of ferromagnetic impurity phase.

36 MATERIALS SCIENCE↗