Search NASA⌕ Search

SEARCH · Search NASA

Results for “synchrotron light source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes

Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, in this study, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li 3 PO 4 , LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) and scrap LiNi 0.866 Mn 0.066 Co 0.05 Al 0.018 O 2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Two-dimensional talc as a natural abundant ultra-broadband hyperbolic material

Here, we demonstrate that two-dimensional talc, a naturally abundant phyllosilicate mineral, supports hyperbolic phonon-polaritons (HPhPs) across the mid- and far-infrared wavelengths. Using scattering scanning near-field optical microscopy (s-SNOM) and synchrotron infrared nano-spectroscopy (SINS), we reveal tunable HPhP modes in talc flakes with long lifetimes, high confinement, and quality factors of up to 5. We further observe Fabry–Pérot cavity modes in tapered flakes, confirmed by simulations and analytical modeling. Compared to synthetic crystals, talc offers an ultra-broadband, low-cost, and sustainable platform for infrared nanophotonics and optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A mechanistic study on environment gas in laser powder bed fusion

A variety of protective or reactive environmental gases have recently gained growing attention in laser-based metal additive manufacturing (AM) technologies due to their unique thermophysical properties and the potential improvements they can bring to the build processes. However, much remains unclear regarding the effects of different gas environments on critical phenomena in laser AM, such as rapid cooling, energy coupling, and defect generation. Through simultaneous high-speed synchrotron x-ray imaging and thermal imaging, we identify distinct effects of two environmental gases in laser AM and gained a deeper understanding of the underlying mechanisms. Compared to the commonly used protective gas, argon, it is found that helium has a negligible effect on cooling the part. However, helium can suppress unstable keyholes by decreasing effective energy absorption, thus mitigating keyhole porosity generation and reducing pore size under certain processing conditions. In conclusion, these observations provide guidelines for the strategic use of environmental gases in laser AM to produce parts with improved quality.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cobalt promotion of the InO x –TiO 2 heterojunction for dual photothermal reduction of CO 2

A series of cobalt-promoted indium–titanium composite oxides was synthesized using a microemulsion method. Their functional properties were investigated for the photothermal reduction of carbon dioxide. In this series, the indium content varied between 2.5 and 20%, while the cobalt percentage was kept constant at 4% throughout the series. In all cases, carbon monoxide formation occurred selectively through the reverse water gas shift reaction. The sample with 2.5% In maximized the synergistic use of the two energy sources, while the sample with 10% In showed the highest catalytic activity under both thermal and dual photo-thermo conditions. A physicochemical characterization was performed for all samples. The use of microscopy and X-ray absorption spectroscopy demonstrated that sub-nanometric indium entities, in combination with atomically dispersed cobalt oxide entities, achieved a balance between high thermal activity and significant synergy between light and heat in a catalytic process. The system with 10% indium is thus able to improve the thermal catalytic process through the use of light, providing an intensification procedure for the classic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Manipulating the Second Coordination Shell of Single-Atom Fe for Enhanced Fenton Reaction

While current methods use oxidizable metals as electron donors to effectively reduce Fe 3+ , they suffer from the irreversible oxidation of these metals, ultimately compromising the catalyst’s longevity. To address this challenge, we engineered the second coordination shell of a single-atom Fe center by doping boron (B) onto a graphene-based support (Fe 1 /B-graphene) and utilized H 2 O 2 as the electron source for efficient Fe 2+ regeneration. Experimental results, supported by theoretical calculations, revealed that the Fe–O–B motif functions like a micro galvanic cell, with intermediary O atoms facilitating electron transfer between electrodes. Specifically, electrons consumed during H 2 O 2 activation at Fe 1 sites (positive electrode) are replenished by electrons extracted from H 2 O 2 at B atoms (negative electrode), where the activation energy for H 2 O 2 oxidation is significantly lower than that at Fe 1 sites. This study offers inspirational insights into the design of Fenton catalysts through precise regulation of the second coordination shell, demonstrating the potential of tailoring the outer coordination environment of single-atom catalysts to enhance catalytic performance across various reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Advancing Sodium-Ion Battery Cathodes: A Low-Cost, Eco-Friendly Mechanofusion Route from TiO 2 Coating to Ti 4+ Doping

Layered oxide battery cathodes often require extra stabilization strategies, such as surface coating or doping, to mitigate side reactions and enhance longevity. Conventional methods such as aqueous deposition and atomic layer deposition are costly and environmentally unfriendly and even damage the original structure, especially for air-sensitive sodium-ion battery (SIB) cathodes. Herein, we introduce an all-dry mechanofusion technique that modifies hydroxide precursors with TiO 2 coating before sintering with a sodium source. Using advanced characterizations including X-ray diffraction, neutron diffraction, and solid-state nuclear magnetic resonance for structural insights, X-ray absorption spectroscopy to study metal valence states, and transmission X-ray microscopy for nanoscale visualization of nickel oxidation states, we verified that postsintering transforms TiO 2 surface coating into Ti doping, leading to improved Ni-oxidation homogeneity, modified charge compensation, and enhanced thermal stability. Electrochemical tests reveal superior performance in capacity retention, rate capability, and air stability for these modified cathodes, with pouch cells maintaining over 85% capacity after 650 cycles. This method presents a sustainable, cost-effective route for advanced SIB cathode development.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Modular multi-interface nanocrystals for enhanced ethanol oxidation electrocatalysis

Electrochemical processes that utilize biomass-derived ethanol as a source of electrons and protons offer a sustainable energy strategy, yet their practical implementation is limited by sluggish ethanol oxidation reaction (EOR) kinetics and catalyst poisoning. Here, in this study, we report a modular multi-interface nanocrystal catalyst comprising core/shell Co 2 P/Pd and Pd-Au heterostructured interfaces that exhibit complementary functions for the enhanced EOR catalysis. The Co 2 P/Pd interface boosts Pd atom utilization and lowers the kinetic barriers for ethanol-to-acetate conversion, while the Pd-Au interface effectively alleviates CO poisoning caused by C–C bond cleavage of ethanol. In-depth analyses using in situ attenuated total reflectance-surface-enhanced infrared absorption spectroscopy, differential electrochemical mass spectrometry, and density functional theory calculations elucidate the mechanistic roles of these interfaces. The optimized Co 2 P/Pd-Au 0.08 nanorods achieve an excellent mass activity, underscoring the potential of modular, multi-interface nanocrystals for advancing EOR catalysis and offering a generalizable strategy for broader catalytic innovations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Oxidation and recharge of reactive structural Fe( II ) in titanomagnetite (Fe 3− x Ti x O 4 ) nanoparticles

Mixed-valent iron oxide minerals, such as magnetite (Fe(II)(Fe(III)) 2 O 4 ), are an important source of solid-state ferrous iron (Fe(II)) that can impact the speciation and transport of electron accepting contaminants in the Earth’s subsurface, such as radioactive pertechnetate ( 99 Tc(VII)O 4 − ). However, when oxidizing conditions are encountered, structural Fe(II) at the mineral surface is consumed yielding a maghemite (γ-Fe(III) 2 O 3 )-like layer that limits further electron transfer. This oxidized surface layer can be recharged back to the original Fe(II)/(III) ratio by re-exposure to reducing conditions, i.e., aqueous solutions containing Fe 2+ . However, for substituted magnetite (Fe 3−x M x O 4 , M = transition metal cation), the extent of this redox recyclability is unclear. Here, we examine oxidation and recharge for titanomagnetite (Fe 3−x Ti x O 4 ) nanoparticles, where the Fe(II)/Fe(III) ratio varies by the amount of Fe(II) required to charge balance the titanium (Ti(IV)) substituted into the structure. The nanoparticles were synthesized by aqueous precipitation from a solution containing ferrous, ferric and titanium chloride at room temperature. Transmission electron microscopy combined with electron energy loss spectroscopy revealed that rapid precipitation formed core–shell-like nanoparticles consisting of a hyperstoichiometric magnetite core, with Ti(IV) and charge balancing Fe(II) enriched at the surface. This surface enrichment made Fe(II) more available for electron transfer reactions with redox active solution species. Examination of oxidation by H 2 O 2 followed by recharge with aqueous Fe 2+ indicates recyclability of reducing equivalents in the nanoparticles, yielding a core recrystallized to stoichiometric magnetite and a shell bearing excess Fe(II) to charge balance the substituted Ti(IV). The recharged particles are shown to have restored redox reactivity with 99 Tc(VII)O 4 − resulting in reduction to 99 Tc(IV)O 2 and oxidation of the structural Fe(II) to Fe(III).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrostatic Superlattices Beyond 1:1 Stoichiometry

ABSTRACT Exotic nanoparticle superstructures can be accessed by harnessing nanoparticle softness and charge regulation, features often viewed as obstacles to structural control. Here, we show that regulated charge mismatch in polymer‐grafted nanoparticles enables the assembly of high‐stoichiometry cubic superlattices. By co‐tuning grafting density, particle size, and bulk composition, we realize ionic‐lattice analogues, such as and , as well as single‐component and superlattices without atomic counterparts. The superlattice has recently been identified theoretically as a photonic band‐gap lattice. These phases emerge from a 1:1 “parent” lattice when local charge neutrality cannot be satisfied, driving either progressive interstitial filling or reorganization into a larger basis. For instance, the systematic occupation of ZnS tetrahedral sites yields , while ligand‐swapping symmetry breaking converts CsCl into . Upon heating, the assemblies exhibit reversible lattice contraction and pronounced negative thermal expansion. Furthermore, the energetic penalty for defects increases with nanoparticle size, facilitating the scalable production of high‐quality, open superlattices for photonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ferromagnetic Atomic d ‐ p Orbital Hybridization for Promoting Al‐S Batteries

Rechargeable aluminum‐sulfur batteries (Al‐S) are emerging as a promising alternative energy storage system beyond lithium‐ion batteries due to their high energy density, abundant material resources, and economic efficiency. However, their practical application remains challenged by sluggish conversion kinetics, polysulfide shuttling, and low sulfur cathode utilization. While extensive studies have focused on enhancing polysulfide adsorption through catalytic strategies, the roles of electronic structure in dictating catalytic performance remain underexplored. Here, this work unveils the critical effect of unpaired electronic structure on the catalytic performance of single atom ferromagnetic transition metals through a systematic evaluation of three typical atomically dispersed ferromagnetic single atoms—Fe, Co, and Ni—supported on porous carbon (denoted as PC‐SAFAs). Comprehensive characterizations and density functional theory (DFT) calculations reveal that the PC‐SAFe catalysts, exhibiting the highest spin polarization arising from unpaired electrons, demonstrate the strongest interactions with polysulfide, thereby facilitating rapid and reversible polysulfide conversion reactions. Consequently, Al‐S batteries incorporating the optimized PC‐SAFe cathode achieve an impressive specific capacity of 508.8 mAh g −1 at 1.0 A g −1 after 500 cycles, along with much improved rate capability. In conclusion, this work provides a deeper understanding of the role of electronic structure in catalytic chemistry, and offers new insights for developing high‐performance Al‐S batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rational Regulation of Layer‐by‐Layer Processed Active Layer via Trimer‐Induced Pre‐Swelling Strategy for Efficient and Robust Thick‐Film Organic Solar Cells

Thick-film (>300 nm) organic solar cells (OSCs) have garnered intensifying attention due to their compatibility with commercial roll-to-roll printing technology for the large-scale continuous fabrication process. However, due to the uncontrollable donor/acceptor (D/A) arrangement in thick-film condition, the restricted exciton splitting and severe carrier traps significantly impede the photovoltaic performance and operability. For this work, combined with layer-by-layer deposition technology, a twisted 3D star-shaped trimer (BTT-Out) is synthesized to develop a trimer-induced pre-swelling (TIP) strategy, where the BTT-Out is incorporated into the buried D18 donor layer to enable the fabrication of thick-film OSCs. The integrated approach characterizations reveal that the exceptional configuration and spontaneous self-organization behavior of BTT-Out trimer could pre-swell the D18 network to facilitate the acceptor's infiltration and accelerate the formation of D/A interfaces. This enhancement triggers the elevated polarons formation with amplified hole-transfer kinetics, which is essential for the augmented exciton splitting efficiency. Furthermore, the regulated swelling process can initiate the favorable self-assembly of L8-BO acceptors, which would ameliorate carrier transport channels and mitigate carrier traps. As a result, the TIP-modified thin-film OSC devices achieve the champion performance of 20.3% (thin-film) and 18.8% (thick-film) with upgraded stability, among one of the highest performances reported of thick-film OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Asymmetry of the Ferroelectric Phase Transition in BaTiO 3

Symmetry changes during phase transformations fundamentally determine the behavior of thermodynamic systems, governing phenomena as diverse as water evaporation, fermion condensation, and epidemic spreading. Phase transitions are conventionally divided into two classes, and this classification is typically assumed to remain invariant upon reversing the transition. Here, an asymmetric phase transformation is uncovered in the ferroelectric–paraelectric transition of single-crystal BaTiO 3 , a model system for first-order transitions. Under slow temperature variation (≤0.1 °C min −1 ), thermodynamic, dielectric, and domain-structure measurements reveal that the ferroelectric-to-paraelectric transition exhibits latent heat, phase coexistence, and a discontinuous order parameter, while these signatures are absent upon cooling. Complementary phase-field simulations demonstrate similar behavior, attributing it to distinct elastic strain energy accumulation and release during heating and cooling. These findings reveal a first-order character upon heating but a second-order-like behavior upon cooling, challenging the conventional paradigm of symmetric phase-transition classification and suggesting new possibilities for ferroelectric-based energy storage.

Hershkovitz, Asaf [Technion-Israel Institute of Te↗
DOE OSTI2025

Dislocation‐Driven Formation of Oriented Macroperiodic Metastructures of Curved Single Crystal Lattices in Glass

Abstract Single crystals fabricated in glass by localized heating can develop uniquely deformed lattices stabilized by the surrounding amorphous medium. The development of lattice curvature appears to be intrinsic to the crystal growth process in some systems, while the result of the locally changing crystallography in others. In this work, a model laser‐fabricated rotating lattice Sb 2 S 3 crystal grown in stoichiometric glass is used to demonstrate fabrication of novel macroperiodic metastructures that utilize intrinsic lattice curvature superimposed with subtle crystallographic influences. The limited availability of slip systems drives the lattice curvature magnitude to vary with crystal growth direction, maximizing for lattices aligned with the predominant Burgers vector along with corresponding increases in dislocation density. Misaligned lattice orientations form smaller secondary lattice curvatures arising from misaligned Burgers vectors with further elastic contributions. Over extended crystal growth, these secondary components align the lattice to rotate about either the <001> or <010> crystal axes forming repeating metastructures of lattice orientation with periodicity 20–160 microns in length. The mechanistic approach used in this work may be expanded to other systems with known slip systems to better understand and design macroperiodic metastructures.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Manipulating Na/TM Ratio‐Driven Structural Heterogeneity of O3‐NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Cathode for High‐Voltage Sodium‐Ion Batteries

The stability of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 under high-voltage cycling is dictated by how synthesis encodes lattice strain and redox heterogeneity. Here, in this study, the role of Na:TM stoichiometry is systematically resolved by tuning the NaOH:precursor ratio during solid-state synthesis. The stoichiometric condition (Na:TM = 1.00) yields minimized microstrain, enabling uniform O3–P3 phase evolution and homogeneous multi-metal redox with preserved octahedral symmetry. In contrast, Na-excess compositions inherit disordered intermediates and heterogeneous distortion fields that trigger abrupt multiphase transitions and promote localized charge redistribution. In situ XRD captures the divergence in phase-transition pathways, TXM resolves particle-level redox heterogeneity, and XANES corroborates a stronger and more reversible Fe redox contribution at stoichiometry, shifting to diminished Fe participation and spatially inhomogeneous redox at higher Na content. These results establish Na:TM stoichiometry as a critical synthesis parameter controlling both structural coherence and redox stability. Electrochemically, the stoichiometric composition exhibits smooth voltage profiles with minimal polarization growth and retains nearly 80% of its initial capacity after 100 cycles even at an extended 4.2 V cutoff, whereas Na-excess compositions show significantly reduced initial coulombic efficiency and rapid voltage fade. Precise stoichiometric tuning provides a scalable route to defect-suppressed O3 frameworks, enabling structurally resilient, high-voltage sodium-layered cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interplay Between Stereochemically Active Lone Pair Repulsions, Sigma Hole Interactions, and Delocalized Redox Processes in Topochemical Fluoride‐Ion Insertion

Topochemical insertion/extraction of cations has emerged as a generalizable strategy for modulating the crystal and electronic structure of periodic solids. In contrast, strategies for topochemical anion insertion are poorly explored and fundamental principles for designing insertion hosts to accommodate anions remain scarce. Here, we observe reversible room-temperature fluoride-ion insertion within tunnels of Sn 2 TiO 4 defined by the stereochemical expression of Sn 5 s 2 lone pairs. X-ray scattering studies of fluoride-ion-insertion-induced crystal structure modulation and X-ray absorption/emission spectroscopy probes of electronic structure along with magnetic susceptibility measurements and first-principles calculations are used to decipher design principles underpinning reversible fluoride-ion insertion and bulk diffusion. Fluoride-ion insertion is enabled by a combination of a large, polarizable tunnel, delocalized redox at Ti─O─Sn centers, inherent repulsion between the fluoride-ion and Sn 5 s 2 electron lone pairs, and the formation of dative interactions between Sn-centered σ-holes and fluoride-ions, yielding a reversible capacity of 0.5 fluoride-ions per Sn 2 TiO 4 formula unit. Our results demonstrate that the complex interplay between dative interactions and stereochemically active lone pair repulsions is critical to defining the thermodynamics and kinetics controlling fluoride-ion insertion and diffusion. As such, the design of fluoride-ion insertion hosts for anion batteries requires site-selective modification to modulate lattice—ion interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Self‐Limiting Polymerization‐Induced Crystallization‐Driven Self‐Assembly (SL‐PI‐CDSA) Enables Templated Synthesis of Chiral Plasmonic, Hybrid 2D Hexagonal Assemblies

Examples of self-regulating synthetic self-assembly are relatively few, with most known chemical systems relying on kinetic rather than thermodynamic control. Herein, we demonstrate the rapid generation (t ≤ 5 min) of size-tunable ultralow dispersity (Ð ≤ 1.01) 2D hexagonal nanosheets governed by self-limiting self-assembly (SLSA). Self-assembly in natural systems occurs with exquisite control of structure, function, and dimension. We demonstrate that key aspects of biological assembly can be rationally applied toward the development of bottom-up approaches for the construction of chiral nanomaterials. To this end, self-limiting polymerization-induced crystallization-driven self-assembly (SL-PI-CDSA) of modular and templating aryl isocyanide (AIC) monomers yields functional 2D assemblies permitting post-polymerization/assembly modifications. Detailed study of the internal and external structure of the hexagonal nanosheets reveals topological defects which offer mechanistic insights into both their assembly and subsequent utilization. Specifically, these features enable fabrication of chiral hybrid organic–inorganic nanomaterials incorporating chiral plasmonic metal nanoparticles (MNPs). Our results suggest that the synergistic interplay of template-driven confinement and hierarchical chirality induce symmetry breaking of in situ-generated gold MNPs. We anticipate that the platform presented will facilitate fabrication of new hybrid, chiral organic–inorganic nanostructures.

36 MATERIALS SCIENCE↗