n -Type Bi 2 Te 3– x Se x Nanoplates with Enhanced Thermoelectric Efficiency Driven by Wide-Frequency Phonon Scatterings and Synergistic Carrier Scatterings
Explore the source record for details and available documents.
charge transport↗
SEARCH · Search NASA
Results for “synthesis (scalable processing)”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Understanding Diffusion in Hierarchical Zeolites with House-of-Cards Nanosheets
Introducing mesoporosity to conventional microporous sorbents or catalysts is often proposed as a solution to enhance their mass transport rates. Here, we show that diffusion in these hierarchical materials is more complex and exhibits non-monotonic dependence on sorbate loading. Our atomistic simulations of n-hexane in a model system containing microporous nanosheets and mesopore channels indicate that diffusivity can be smaller than in a conventional zeolite with the same micropore structure, and this observation holds true even if we confine the analysis to molecules completely inside the microporous nanosheets. Only at high sorbate loadings or elevated temperatures, when the mesopores begin to be sufficiently populated, does the overall diffusion in the hierarchical material exceed that in conventional microporous zeolites. Here, our model system is free of structural defects, such as pore blocking or surface disorder, that are typically invoked to explain slower-than-expected diffusion phenomena in experimental measurements. Examination of free energy profiles and visualization of molecular diffusion pathways demonstrates that the large free energy cost (mostly enthalpic in origin) for escaping from the microporous region into the mesopores leads to more tortuous diffusion paths and causes this unusual transport behavior in hierarchical nanoporous materials. This knowledge allows us to re-examine zero-length-column chromatography data and show that these experimental measurements are consistent with the simulation data when the crystallite size instead of the nanosheet thickness is used for the nominal diffusional length.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Speed Limit for Triplet-Exciton Transfer in Solid-State PbS Nanocrystal-Sensitized Photon Upconversion
Hybrid interfaces combining inorganic and organic materials underpin the operation of many optoelectronic and photocatalytic systems and allow for innovative approaches to photon up- and down-conversion. However, the mechanism of exchange-mediated energy transfer of spin-triplet excitons across these interfaces remains obscure, particularly when both the macroscopic donor and acceptor are composed of many separately interacting nanoscopic moieties. Here, we study the transfer of excitons from colloidal lead sulfide (PbS) nanocrystals to the spin-triplet state of rubrene molecules. By reducing the length of the carboxylic acid ligands on the nanocrystal surface from 18 to 4 carbon atoms, thinning the effective ligand shell from 13 to 6 Å, we are able to increase the characteristic transfer rate by an order of magnitude. However, we observe that the energy transfer rate asymptotes for shorter separation distances (≤10 Å) which we attribute to the reduced Dexter coupling brought on by the increased effective dielectric constant of these solid-state devices when the aliphatic ligands are short. This implies that the shortest ligands, which hinder long-term colloidal stability, offer little advantage for energy transfer. Indeed, we find that hexanoic acid ligands are already sufficient for near-unity transfer efficiency. Using nanocrystals with these optimal-length ligands in an improved solid-state device structure, we obtain an upconversion efficiency of (7 ± 1)% with excitation at λ = 808 nm.
36 MATERIALS SCIENCE↗
Charge Transport Modulation in PbSe Nanocrystal Solids by Au x Ag 1– x Nanoparticle Doping
Nanocrystal (NC) solids are an exciting class of materials, whose physical properties are tunable by choice of the NCs as well as the strength of the interparticle coupling. One can consider these NCs as “artificial atoms” in analogy to the formation of condensed matter from atoms. Akin to atomic doping, the doping of a semiconducting NC solid with impurity NCs can drastically alter its electronic properties. A high degree of complexity is possible in these artificial structures by adjusting the size, shape, and composition of the building blocks, which enables “designer” materials with targeted properties. Here, we present the doping of the PbSe NC solids with a series of Au x Ag 1–x alloy nanoparticles (NPs). A combination of temperature-dependent electrical conductance and Seebeck coefficient measurements and room-temperature Hall effect measurements demonstrates that the incorporation of metal NPs both modifies the charge carrier density of the NC solids and introduces energy barriers for charge transport. These studies point to charge carrier injection from the metal NPs into the PbSe NC matrix. The charge carrier density and charge transport dynamics in the doped NC solids are adjustable in a wide range by employing the Au x Ag 1–x NP with different Au:Ag ratio as dopants. Furthermore, this doping strategy could be of great interest for thermoelectric applications taking advantage of the energy filtering effect introduced by the metal NPs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Single Nanocrystal Spectroscopy of Shortwave Infrared Emitters
Short-wave infrared (SWIR) emitters are at the center of ground-breaking applications in biomedical imaging, next-generation optoelectronic devices, and optical communications. Colloidal nanocrystals based on indium arsenide are some of the most promising SWIR emitters to date. However, the lack of single-particle spectroscopic methods accessible in the SWIR has prevented advances in both nanocrystal synthesis and fundamental characterization of emitters. In this paper, we demonstrate an implementation of a solution photon correlation Fourier spectroscopy (s-PCFS) experiment utilizing the SWIR sensitivity and time resolution of superconducting nanowire single-photon detectors to extract single-particle emission linewidths from colloidal indium arsenide/cadmium selenide (InAs/CdSe) core/shell nanocrystals emissive from 1.2 to 1.6 μm. We show that the average single InAs/CdSe nanocrystal fluorescence linewidth is, remarkably, as narrow as 52 meV, similar to what has been observed in some of the most narrowband nanostructured emitters in the visible region. Additionally, the single nanocrystal fluorescence linewidth increases with increasing shell thickness, suggesting exciton–phonon coupling as the dominant emission line-broadening mechanism in this system. The development of the SWIR s-PCFS technique has enabled measurements of spectral linewidths of colloidal SWIR-emissive NCs in solution and provides a platform to study the single NC spectral characteristics of SWIR emitters.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tunable Light-Emitting Diodes Utilizing Quantum-Confined Layered Perovskite Emitters
Organic–inorganic perovskites have been shown to have excellent optoelectronic properties. Further, layered perovskites have been demonstrated, utilizing quantum confinement to achieve emission blue-shifted from the bulk band gap. Here, we tune this blue-shift to build LEDs that span the visible spectrum. We demonstrate that electroluminescence from red-shifted layers dominates emission from mixed-thickness devices and that the addition of excess ligand is necessary to drive emission toward blue-shifted layers. By tuning the thickness of the layers, we build LEDs with blue emission utilizing the lead bromide system and orange emission utilizing the lead iodide system. Lastly, we demonstrate that these materials suffer reversible degradation under an applied electric field. The spectrally narrow emission, combined with the favorable electronic properties of perovskite materials and access to shorter emission wavelengths through quantum confinement, demonstrates the promise of these materials as a new platform for low-cost, high-performance light-emitting devices.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering a Full Gamut of Structural Colors in All-Dielectric Mesoporous Network Metamaterials
Structural colors are a result of the scattering of certain frequencies of the incident light on micro- or nanoscale features in a material. This is a quite different phenomenon from that of colors produced by absorption of different frequencies of the visible spectrum by pigments or dyes, which is the most common way of coloring used in our daily life. However, structural colors are more robust and can be engineered to span most of the visible spectrum without changing the base material, only its internal structure. They are abundant in nature, with examples as colorful as beetle shells and butterfly wings, but there are few ways of preparing them for large-scale commercial applications for real-world uses. In this work, we present a technique to create a full gamut of structural colors based on a low-cost, robust, and scalable fabrication of periodic network structures in porous alumina as well as the strategy to theoretically predict and engineer different colors on demand. We experimentally demonstrate mesoporous network metamaterial structures with engineered colors spanning the whole optical spectrum and discuss their applications in sensing, environmental monitoring, biomimetic tissues engineering, etc.
36 MATERIALS SCIENCE↗
Polarization-Independent Optical Broadband Angular Selectivity
Generalizing broadband angular selectivity to both polarizations has been a scientific challenge for a long time. Previous demonstrations of the broadband angular selectivity work only for one polarization. In this paper, we propose a method that can achieve polarization-independent optical broadband angular selectivity. Our design is based on a material system consisting of alternating one-dimensionally anisotropic photonic crystal (1D PhC) stacks and half-wave plates. 1D PhC stacks have an angular photonic band gap for p-polarized light and half-wave plates can convert s-polarized light to p-polarized light. Here, by introducing alternating 1D PhC stacks and half-wave plates, we predict that one can achieve a central transmission angle at normal incidence and an angularly selective range of less than 30° across the whole visible spectrum.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Total Utilization of Miscanthus Biomass, Lignin and Carbohydrates, Using Earth Abundant Nickel Catalyst
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Synthesis of Renewable Thermoset Polymers through Successive Lignin Modification Using Lignin-Derived Phenols
An approach to lignin-based epoxy networks from both organosolv lignin and lignin derived phenol (dihydroeugenol) are developed using multiple chemical modifications including demethylation, phenolation and phenol-formaldehyde reaction. Structures of lignin incorporated novolac polyphenols (LINPs) and epoxy networks (LINENs) were characterized using proton nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. Compared to a common synthesis route in which lignin was epoxidized prior to blend with comonomers (LBEN), LINEN derivatives exhibited improved crosslink density ($ρ$), $α$-relaxation temperature ($T_α$) and storage modulus in glassy region ($E_g'$) as obtained from dynamic mechanical analysis (DMA), and increased thermal stability measured by thermogravimetric analysis (TGA). This study widens the routes of lignin modification. Renewable epoxy networks derived from both lignin and lignin derivatives are economically and ecologically attractive.
09 BIOMASS FUELS↗
Biomass-Derived Butadiene by Dehydra-Decyclization of Tetrahydrofuran
Explore the source record for details and available documents.
bio-inspired↗
Renewable Epoxy Thermosets from Fully Lignin-Derived Triphenols
A series of fully renewable triphenols (TPs) with various number of methoxy group substituents (n = 0–6) were synthesized using lignin-derived phenols (guaiacol and 2,6-dimethoxyphenol) and aldehydes (4-hydroxybenzaldehyde, vanillin, and syringaldehyde). The structural evolution from TPs to epoxy thermosets was followed by nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopy. Thermomechanical properties of the resulting epoxy thermosets were investigated by dynamic mechanical analysis (DMA), tensile analysis (TA), and thermogravimetric analysis (TGA). Increasing the content of methoxy groups decreased the glass transition temperature (132–118 °C) and glassy modulus (2.7–2.2 GPa). Thermal stability of high-methoxy-content thermosets was reduced due to electron-donating effects and higher oxygen content. Conversions and isolated yields of TPs significantly decreased as the number of methoxy substituents increased, which markedly determined the feasibility of TPs as precursors for polymers. This work widens the synthesis route of fully lignin-derived polyphenols, yielding polymers with thermomechanical properties comparable to bisphenol A (BPA) based materials. Finally, evaluation of methoxy substitution provides insight for the selection of lignin-derived monomers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Selective Hydrogenation of Biomass-Derived 2(5H)-Furanone to γ-Butyrolactone over Ni-Based Bimetallic Catalysts
2(5H)-Furanone was selectively hydrogenated to γ-butyrolactone (GBL) over Ni-based bimetallic catalysts, Ni-M/SiO2 (M = Fe, Co, Cu, and Zn). Catalyst characterization showed that the metal dispersion and reducibility were changed after introducing a second metal, while the physical morphology was nearly unchanged. The most active and selective bimetallic catalyst was found to be Ni–Fe/SiO2. The reaction rate constant over the 4 wt %Ni–1 wt %Fe/SiO2 bimetallic catalyst was 0.06 min–1, doubling that over 5 wt %Ni/SiO2, and the selectivity to GBL increased slightly from 86.1 to 89.5%. The Fe/(Ni+Fe) weight ratio was changed to optimize the promoting effect of Fe. The Ni–Fe bimetallic effect was further investigated using temperature-programmed desorption experiments on single crystal model surfaces with different Fe/Ni(111) structures, revealing that the enhanced catalyst activity was mainly contributed by the formation of the Ni–Fe surface alloy.
bio-inspired↗
Phosphoryl-Ligand Adducts of Rare Earth-TriNOx Complexes: Systematic Studies and Implications for Separations Chemistry
Phosphoryl ligands of the general formula O$=$PR 3 (R = Me, OMe, Et, $^n$Bu, Ph, $^i$Pr, NMe 2 ) were coordinated to [Nd(TriNOx)] (TriNOx 3– = ([(2-$^t$BuNO)C 6 H 4 CH 2 ] 3 N) 3– ), and the resulting complexes were characterized. Solution equilibrium constants for each complex were determined, demonstrating a large range for phosphoryl ligands’ Lewis basicity. Thermogravimetric analyses provided evidence for the qualitative thermodynamic preference of phosphoryl ligands for [Nd(TriNOx)] over the dysprosium analogue. Here, these findings were exploited for the separation of binary mixtures of neodymium/dysrosium and lanthanum/neodymium. Implementation of phosphoryl ligands in the TriNOx separation system expands its scope and demonstrates a fundamentally different mode for separating rare-earth cations based on adducts with neutral donors.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Direct CO 2 Capture from Air using Poly(ethylenimine)-Loaded Polymer/Silica Fiber Sorbents
Direct CO2 capture from atmospheric air is gaining increased attention as one of the most scalable negative carbon approaches available to tackle climate change if coupled with the sequestration of CO2 geologically. Furthermore, it can also provide CO2 for further utilization from a globally uniform source, which is especially advantageous for economies without natural sources of carbon-based feedstocks. Solid-supported amine-based materials are effective for direct air capture (DAC) due to their high CO2 uptakes and acceptable sorption kinetics at ambient temperature. In this work, we describe the application of polymer/silica fiber sorbents functionalized with a primary amine-rich polymer, poly(ethylenimine) (PEI), for DAC. Monolithic fiber sorbents composed of cellulose acetate and SiO2 are synthesized via the dry-jet, wet quench spinning technique. These fibers are then functionalized with PEI (Mw 800 Da) in a simple and scalable postspinning infusion step and tested for CO2 capture under pseudoequilibrium conditions as well as under breakthrough conditions. An investigation to study the effect of feed flow rate, adsorption temperature, and presence of moisture in the feed on the CO2 breakthrough performance of a densely packed fiber sorbent module is conducted to highlight the potential application of this class of structured contactors in direct air capture. The pressure drop of these contactors at high gas velocities is also evaluated. Finally, a vacuum-assisted desorption step is demonstrated for production of high-purity CO2 from both dry and humid ambient air mixtures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of Different Acid Initiators on Branched Poly(propylenimine) Synthesis and CO 2 Sorption Performance
Branched poly(propylenimine) (PPI) provides an alternative to the prototypical amine polymer, commercially available branched poly(ethylenimine) (PEI), in composite adsorbents for CO 2 capture. Herein, we investigate the synthesis of PPI via cationic ring opening polymerization of azetidine using various acid initiators (HBr, HClO 4 , HCl, CH 3 SO 3 H) and polymerization times, impacting the molecular weight and CO 2 sorption behavior. The polymerization kinetics and the amine distribution (i.e., primary:secondary:tertiary ratios) are monitored with 1 H NMR during polymerization, and a basic ion-exchange resin is used to neutralize charged amine centers and to remove unreacted acid. The polymers are impregnated into the model porous oxide support, mesoporous silica SBA-15, and the CO 2 capacities under both simulated ambient air and flue gas conditions are elucidated. In parallel, the oxidative stability of the PPI-based sorbents is assessed and compared with the prototypical PEI sorbents. Sorbents with 30 wt % polymers synthesized using HBr and HClO 4 exhibit higher CO 2 capacities than those made with HCl or CH 3 SO 3 H. Sorbents from HBr polymers only lost 24% of their CO 2 capacity after 12 h of oxidation in air at 383 K. Even trace amounts of residual ClO 4 – anions in HClO 4 initiated polymers, though, accelerated oxidation (decreased CO 2 capacity by 64%). In conclusion, extended resin treatments were needed to leave undetectable Cl content in these polymers, which resulted in sorbents that are much more oxidatively stable.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Systematic Tuning and Multifunctionalization of Covalent Organic Polymers for Enhanced Carbon Capture
Porous covalent polymers are attracting increasing interest in the fields of gas adsorption, gas separation, and catalysis due to their fertile synthetic polymer chemistry, large internal surface areas, and ultrahigh hydrothermal stabilities. While precisely manipulating the porosities of porous organic materials for targeted applications remains challenging, we show how a large degree of diversity can be achieved in covalent organic polymers by incorporating multiple functionalities into a single framework, as is done for crystalline porous materials. In this work, we synthesized 17 novel porous covalent organic polymers (COPs) with finely tuned porosities, a wide range of Brunauer–Emmett–Teller (BET) specific surface areas of 430–3624 m 2 g –1 , and a broad range of pore volumes of 0.24–3.50 cm 3 g –1 , all achieved by tailoring the length and geometry of building blocks. Furthermore, we are the first to successfully incorporate more than three distinct functional groups into one phase for porous organic materials, which has been previously demonstrated in crystalline metal–organic frameworks (MOFs). COPs decorated with multiple functional groups in one phase can lead to enhanced properties that are not simply linear combinations of the pure component properties. For instance, in the dibromobenzene-lined frameworks, the bi- and multifunctionalized COPs exhibit selectivities for carbon dioxide over nitrogen twice as large as any of the singly functionalized COPs. These multifunctionalized frameworks also exhibit a lower parasitic energy cost for carbon capture at typical flue gas conditions than any of the singly functionalized frameworks. Despite the significant improvement, these frameworks do not yet outperform the current state-of-art technology for carbon capture. Nonetheless, the tuning strategy presented here opens up avenues for the design of novel catalysts, the synthesis of functional sensors from these materials, and the improvement in the performance of existing covalent organic polymers by multifunctionalization.
mathematical methods↗
Linking CO 2 Sorption Performance to Polymer Morphology in Aminopolymer/Silica Composites through Neutron Scattering
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗