Search NASA⌕ Search

SEARCH · Search NASA

Results for “tensor factorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Modified Eddington-inspired-Born-Infeld gravity with a trace term

In this study, a modified Eddington-inspired-Born-Infeld (EiBI) theory with a pure trace term g μν R being added to the determinantal action is analysed from a cosmological point of view. It corresponds to the most general action constructed from a rank two tensor that contains up to first order terms in curvature. This term can equally be seen as a conformal factor multiplying the metric g μν . This very interesting type of amendment has not been considered within the Palatini formalism despite the large amount of works on the Born-Infeld-inspired theory of gravity. This model can provide smooth bouncing solutions which were not allowed in the EiBI model for the same EiBI coupling. Most interestingly, for a radiation filled universe there are some regions of the parameter space that can naturally lead to a de Sitter inflationary stage without the need of any exotic matter field. Finally, in this model we discover a new type of cosmic “quasi-sudden” singularity, where the cosmic time derivative of the Hubble rate becomes very large but finite at a finite cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

A Projected Estimate of the Reionization Optical Depth Using the CLASS Experiment’s Sample Variance Limited E-mode Measurement

Here, we analyze simulated maps of the Cosmology Large Angular Scale Surveyor (CLASS) experiment and recover a nearly cosmic variance limited estimate of the reionization optical depth τ. We use a power spectrum-based likelihood to simultaneously clean foregrounds and estimate cosmological parameters in multipole space. Using software specifically designed to constrain τ, the amplitude of scalar fluctuations A s , and the tensor-to-scalar ratio r, we demonstrate that the CLASS experiment will be able to estimate τ within a factor of two of the cosmic variance limit allowed by full-sky cosmic microwave background polarization measurements. Additionally, we discuss the role of CLASS's τ constraint in conjunction with gravitational lensing of the CMB on obtaining a ≳4σ measurement of the sum of the neutrino masses.

79 ASTRONOMY AND ASTROPHYSICS↗

Finite Volume Corrections to the Nucleon Axial Charge

By considering the pion-mediated tensor force between nucleons on a finite lattice, we seek to explain the volume dependence of the nucleon axial charge g{sub A}. We observe that the wave function renormalization associated with this pion-exchange force significantly reduces g{sub A} in a finite volume.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Testing non-minimally coupled inflation with CMB data: a Bayesian analysis

We use the most recent cosmic microwave background (CMB) data to perform a Bayesian statistical analysis and discuss the observational viability of inflationary models with a non-minimal coupling, ξ, between the inflaton field and the Ricci scalar. We particularize our analysis to two examples of small and large field inflationary models, namely, the Coleman-Weinberg and the chaotic quartic potentials. We find that ( i ) the ξ parameter is closely correlated with the primordial amplitude ; ( ii ) although improving the agreement with the CMB data in the r − n {sub s} plane, where r is the tensor-to-scalar ratio and n {sub s} the primordial spectral index, a non-null coupling is strongly disfavoured with respect to the minimally coupled standard ΛCDM model, since the upper bounds of the Bayes factor (odds) for ξ parameter are greater than 150:1.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass radius and D-term of atomic nuclei in relativistic mean field theory

Based on relativistic mean field theory for atomic nuclei, we compute the mass radius and other radii associated with the energy momentum tensor for dozens of spin-0 nuclei across the nuclear chart. We also compute the D-term of these nuclei, the forward limit of the gravitational form factor 𝐷⁡(𝑡=0)=𝐷. The dependence on the neutron number 𝑁 is systematically studied for calcium (Ca), nickel (Ni), zirconium (Zr), tin (Sn), and lead (Pb) isotopes. Remarkably, |𝐷| does not monotonically increase with 𝑁. Instead, it exhibits local maxima and minima when 𝑁 equals a magic number and even a submagic number. This results in characteristic kinks in the mass, scalar, tensor, and shear radii of these isotopes. Our work for the first time elucidates the strong sensitivity of the various mechanical properties of nuclei to the nuclear shell structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantitative Characterization of Impacts of Coupled Geomechanics and Flow on Safe and Permanent Geological Storage of CO 2 in Fractured Aquifers

This is the final scientific report for the award DE-FE0023305, entitled “Quantitative Characterization of Impacts of Coupled Geomechanics and Flow on Safe and Permanent Geological Storage of CO 2 in Fractured Aquifers.” The work has been divided into six tasks. In Task 2, we characterized rock properties, which are important when developing a quantitative approach for understanding and predicting geomechanical effects on large-scale CO 2 injection and long-term storage in the subsurface. Rock properties of interest for this characterization include porosity, permeability, elastic constants, strength, and heat capacity. We measured rock properties for three different rock types: concrete, sandstone and shale. These properties were obtained from the acoustic measurement, permeability and porosity measurement, Brazilian test, the uniaxial compressive test, and heat capacity measurement. Then, using the Brazilian technique to fracture samples, we measured their permeability under brine injection for varying effective stresses, followed by similar measurements of permeability under sc-CO 2 injection. Permeability to brine and sc-CO 2 decreased as the effective stress increased. The apparent permeability to sc-CO 2 was an order of magnitude less than that for brine, a consequence of CO 2 being the non-wetting fluid. In Task 3, we developed understandings and correlations for CO 2 injection pressure induced fracturing. We initially fractured four eight inch cubes of concrete with brine to establish a standard test procedure. Then, additional concrete samples were fractured using brine. Confining stresses were exerted on the samples and brine was injected at a constant rate into a borehole that was previously drilled into the concrete cube. The borehole pressure was measured and fracture initiation was identified as a peak in the pressure profile. That was followed by fracture propagation, which was identified as a plateau in the pressure profile, and finally the fracture reached the sample surface. The sample surfaces were photographed before and after fracturing, which enabled determination of where the fracture reached the sample surface. Afterwards, aqueous food dye solution was injected into the fractured concrete samples to color the fracture planes. The borehole was filled with food dye solution in advance, a gas pulse was transmitted to the borehole, and the borehole was then shut in to allow the food dye to be driven into existing fractures. Then, the concrete samples were broken down by high-pressure gas injection to reveal the geometry and morphology of the hydraulic fractures. In addition, acoustic measurements were conducted on multiple locations on each face of the concrete samples before and after injection for comparison. This comparison was used to confirm changes in the internal structure of the concrete sample, namely the formation of fractures. There were six concrete samples fractured with brine. Afterwards, concrete samples were fracture using sc-CO 2 . The main change in experimental procedure was the inclusion of temperature control, since in the field, we mostly encounter temperature and pressure conditions above the supercritical point of CO 2 . The concrete samples were pre-heated in an oven to elevate their temperature, and thermal tape was used to heat the CO 2 to a temperature above its supercritical temperature. Two concrete samples were fractured using liquid CO 2 , four concrete samples were fractured using gaseous CO 2 , and twenty two concrete samples were fractured using sc-CO 2 . For the concrete samples fractured using sc-CO 2 , three had pre-existing hydraulic fractures on the surface near the wellbore, and two were water saturated (as opposed to containing only air). Two concrete samples were composite samples, with a high permeability ball in the center, in order to represent CO 2 injection into a high permeability zone surrounded by a low permeability sealing formation. Later, we fractured five shale samples, obtained from the Niobrara shale outcrop, with sc-CO 2 . The injection rate was constant, confining stresses were applied, the shale samples were pre-heated in an oven to the desired temperature, and the sample was then fractured. An analysis of the failure type was done for many of the concrete samples, based on the predicted break down pressure for tensile and shear failure, and it was found that most samples fractured due to shear failure. Also, the presence of induced fractures has little to no effect on the fracture initiation pressure, but significantly changes the fracture morphology. The CO 2 fracturing in water saturated samples behaved much similar to brine induced fracturing. There was a significant difference of breakdown pressure for injection of CO 2 and brine, where the breakdown pressure for CO 2 induced fracturing is generally around the minimum horizontal stress and that for brine is much higher. Finally, the fracture orientation for most samples with large confining stress differential was perpendicular to the minimum horizontal stress. When the stress differential, especially the difference between the two directions with the smallest stresses was small, the fracture orientation was determined not only by the minimum stress direction, but also the magnitude of the confining stress, the tensile strength of the rock, and the breakdown pressure. In Task 4, we modified our coupled flow-geomechanical models to model fracture growth and propagation in storage formations and caprocks. These flow-geomechanical models are TOUGH2-CSM and TOUGH2-FLAC. The TOUGH2-CSM fluid and heat flow formulation is based on the TOUGH2 formulation of mass and energy conservation equations that govern fluid and heat flow in general multiphase, multicomponent, multi-porosity systems. The TOUGH2-CSM simplified geomechanical formulation is based on the linear theory of elasticity applied to multi-porosity non-isothermal (thermo-multi-poroelastic) media. We previously derived, from the fundamental relations of the linear theory of elasticity, an equation relating mean stress, pore pressures, temperatures, and body force (the Mean Stress equation) that we added to the TOUGH2-CSM fluid and heat flow equations. We extended the TOUGH2-CSM simplified geomechanical formulation to calculate the entire stress tensor by deriving equations for stress tensor components from derivatives of the Cartesian thermo-multi-poroelastic Navier equation components. In addition, we derived equations for stress tensor components in rz-coordinates. We solved these geomechanical equations using the integral finite difference method. This method utilizes momentum fluxes obtained by “factoring” a divergence operator out of each geomechanical equation. In Task 5, we did a literature survey to determine suitable correlations for fracture initiation, growth, and propagation. After surveying numerous papers, we modified TOUGH2-CSM to model stress dependent fracture initiation and growth using the Mohr-Coulomb criterion for shear failure in faults and caprock and the condition of negative minimum effective stress for tensile failure. Tensile failure results in a fracture whose width depends on the difference between fracture pressure and minimum stress and whose propagation is based on the difference between the stress intensity factor at the fracture tip and the rock toughness. The TOUGH-FLAC model is based on the FLAC3D ubiquitous joint model, extended for the modeling of permeability changes induced by changes in effective normal stress across fractures as well permeability changes caused by shearing along fractures. In Task 6, we validated our coupled flow-geomechanical models using analytical solutions and problems from the literature. We validated the TOUGH2-CSM modifications using analytical solutions to the displacement from a uniform load on a semi-infinite elastic medium and the two-dimensional Mandel-Cryer effect. Those were followed by a sample problem to test our stress tensor calculations, which was for injection into a single-phase reservoir with constant properties. Comparisons of our simulator to published results were done on for the depletion of a single-phase reservoir with stress dependent porosity, two examples from the In Salah gas project, an axisymmetric baserock–reservoir–caprock system with a normal faulting stress regime that had thermally induced shear stresses, simulations of CO 2 leakage through caprock in a two-dimensional reservoir in Cartesian coordinates, and predictions of caprock failure from CO 2 injection into an axisymmetric reservoir. Finally, we simulated CO 2 injection pressure-induced fracturing from one of our laboratory studies, Sample 39, and obtained a fracture profile. We also validated the TOUGH2-FLAC model for fluid driven fracture growth against solutions based on the KGD model and a case with an inclined fracture that was loaded from the boundaries to achieve wing-crack propagation. The strain softening tensile behavior and softening of modulus considering a simple damage approach was verified by a simulation representing hydraulic fracturing stress measurement around a vertical well. Finally, the model was validated against deep fracture zone opening and surface uplift at In Salah with inverses analysis used to improve the match of simulation with field data. In Task 7, we developed a scheme based on inverse modeling that can be used to identify caprock leakage. Injection of fluid into a reservoir results in a time varying pressure profile that depends on the properties of the rock and the fluid. The presence of significant caprock leakage would effect this pressure profile and we used inverse modeling, namely the Levenberg-Marquardt method, to determine the leakage location from the pressure profile. A two-dimensional and a three-dimensional example based on published data were presented. The published simulation was run and its results were considered as “field” data. In the two-dimensional example, a simulation of CO 2 injection into a two-dimensional aquifer-caprock system, the caprock had a vertical fault through which leakage could occur. The location of this leakage was obtained from our inverse modeling scheme. In the three-dimensional example, the simulation domain had four geological layers, one of which was the injection zone that contained a horizontal injection well. We simulated fractures as high permeability gridblocks, introduced a fracture that spanned the caprock depth, and ran a simulation to obtain “field” data. Then, using our inverse modeling scheme, we obtained the location of that fracture.

58 GEOSCIENCES↗

Cosmological perturbation in f(T) gravity revisited

We perform detailed investigation of cosmological perturbations in f(T) theory of gravity coupled with scalar field. Our work emphasizes on the way to gauge fix the theory and we examine all possible modes of perturbations up to second order. The analysis includes pseudoscalar and pseudovector modes in addition to the usual scalar, vector, and tensor modes. We find no gravitational propagating degree of freedom in the scalar, pseudoscalar, vector, as well as pseudovector modes. In addition, we find that the scalar and tensor perturbations have exactly the same form as their counterparts in usual general relativity with scalar field, except that the factor of reduced Planck mass squared M{sub pl}{sup 2}≡1/(8πG) that occurs in the latter has now been replaced by an effective time-dependent gravitational coupling −2(df/dT)|{sub T=T{sub 0}}, with T{sub 0} being the background torsion scalar. The absence of extra degrees of freedom of f(T) gravity at second order linear perturbation indicates that f(T) gravity is highly nonlinear. Consequently one cannot conclusively analyze stability of the theory without performing nonlinear analysis that can reveal the propagation of the extra degrees of freedom.

79 ASTRONOMY AND ASTROPHYSICS↗

{Delta}(1232) Axial Charge and Form Factors from Lattice QCD

We present the first calculation on the {Delta} axial vector and pseudoscalar form factors using lattice QCD. Two Goldberger-Treiman relations are derived and examined. A combined chiral fit is performed to the nucleon axial charge, N to {Delta} axial transition coupling constant and {Delta} axial charge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

GPU-Accelerated Analytic Simulation of Sparse Ionization Signal Formation in Pixelated Projection Detector

This paper presents a GPU-accelerated simulation package, TRED, for next-generation neutrino detectors with pixelated charge readout, leveraging community-driven software ecosystems to ensure adaptability and extensibility. We introduce two generic contributions: (i) an effective-charge representation based on Gaussian quadrature rules, in which the linear- interpolation factors for the field response inside each voxel are absorbed into the effective charge, and (ii) a sparse, block- binned tensor representation that enables efficient FFT-based computation of induced signals on readout electrodes for sparsely activated detector volumes. The former captures structure inside a voxel without dense sampling, while the latter achieves low memory usage and scalable runtime, as demonstrated in bench- mark studies. The underlying data representation is applicable to large-scale detectors and to other computational problems involving sparse activity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Short-Range Structure of Nuclei

The results of the Jefferson Lab Hall A experiment E01-015 to measure high relative momentum correlated nucleons will be presented. This experiment, which simultaneously measured the (e,e'pp) and (e,e'pn) reactions, found that nearly all the correlated nucleon-nucleon pairs were proton-neutron. This result is consistent with recent calculations with include the tensor component of the nucleon-nucleon force.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tensor meson production in proton-proton collisions from the color glass condensate

We compute the inclusive cross section of f{sub 2} tensor-meson production in proton-proton collisions at high energy. We use an effective theory inspired from the tensor-meson dominance hypothesis that couples gluons to f{sub 2} mesons. We compute the differential cross section in the k{sub perpendicular} factorization and in the color glass condensate formalism in the low density regime. We show that the two formalisms are equivalent for this specific observable. Finally, we study the phenomenology of f{sub 2} mesons by comparing theoretical predictions of different parametrizations of the unintegrated gluon distribution function. We find that f{sub 2}-meson production is another observable that can be used to put constraints on these distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of latent dimensionality in international trade flow

Currently, high-dimensional data is ubiquitous in data science, which necessitates the development of techniques to decompose and interpret such multidimensional (aka tensor) datasets. Finding a low dimensional representation of the data, that is, its inherent structure, is one of the approaches that can serve to understand the dynamics of low dimensional latent features hidden in the data. Moreover, decomposition methods with non-negative constraints are shown to extract more insightful factors. Nonnegative RESCAL is one such technique, particularly well suited to analyze self-relational data, such as dynamic networks found in international trade flows. Particularly, non-negative RESCAL computes a low dimensional tensor representation by finding the latent space containing multiple modalities. Furthermore, estimating the dimensionality of this latent space is crucial for extracting meaningful latent features. Here, to determine the dimensionality of the latent space with non-negative RESCAL, we propose a latent dimension determination method which is based on clustering of the solutions of multiple realizations of non-negative RESCAL decompositions. We demonstrate the performance of our model selection method on synthetic data. We then apply our method to decompose a network of international trade flows data from International Monetary Fund and shows that with a correct latent dimension determination, the resulting features are able to capture relevant empirical facts from economic literature.

97 MATHEMATICS AND COMPUTING↗

Study of the radiative pion decay

We study the radiative pion decay of {pi}{sup +}{yields}e{sup +}{nu}{sub e}{gamma} in the light-front quark model. We also summarize the result in the chiral perturbation theory. The vector and axial-vector hadronic form factors (F{sub V,A}) for the {pi}{yields}{gamma} transition are evaluated in the whole allowed momentum transfer. In terms of these momentum dependent form factors, we calculate the decay branching ratio and compare our results with the experimental data and other theoretical predictions in the literature. We also constrain the possible size of the tensor interaction in the light-front quark model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Photon Impact Factor for DIS at NLO: analytic result

Using the Operator Product Expansion for high-energy scattering processes, we compute the photon impact factor at next-to-leading order accuracy. We obtain an analytic expression as a linear combination of five independent conformal tensor structures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

STELLAR STRUCTURE AND TESTS OF MODIFIED GRAVITY

Theories that attempt to explain cosmic acceleration by modifying gravity typically introduces a long-range scalar force that needs to be screened on small scales. One common screening mechanism is the chameleon, where the scalar force is screened in environments with a sufficiently deep gravitational potential, but acts unimpeded in regions with a shallow gravitational potential. This leads to a variation in the overall gravitational G with environment. We show that such a variation can occur within a star itself, significantly affecting its evolution and structure, provided that the host galaxy is unscreened. The effect is most pronounced for red giants, which would be smaller by a factor of tens of percent and thus hotter by hundreds of Kelvin, depending on the parameters of the underlying scalar-tensor theory. Careful measurements of these stars in suitable environments (nearby dwarf galaxies not associated with groups or clusters) would provide constraints on the chameleon mechanism that are four orders of magnitude better than current large-scale structure limits and two orders of magnitude better than present solar system tests.

79 ASTRONOMY AND ASTROPHYSICS↗

'Minimal Metagravity versus Dark Matter and/or Dark Energy' [Physics of Atomic Nuclei 70, 2148-2151 (2007)]

The minimal metagravity theory, explicitly violating the general covariance but preserving the unimodular one, is applied to study the evolution of the isotropic homogeneous Universe. The massive scalar graviton, contained in the theory in addition to the massless tensor one, is treated as a source of the dark matter and/or dark energy. The modified Friedmann equation for the scale factor of the Universe is derived. The question wether the minimal metagravity can emulate the LCDM concordance model, valid in General Relativity, is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Two loop stress-energy tensor for inflationary scalar electrodynamics

We calculate the expectation value of the coincident product of two field strength tensors at two loop order in scalar electrodynamics on de Sitter background. The result agrees with the stochastic formulation which we have developed in a companion paper [T. Prokopec, N. C. Tsamis, and R. P. Woodard, Ann. Phys. (N.Y.) 323, 1324 (2008)] for the nonperturbative resummation of leading logarithms of the scale factor. When combined with a previous computation of scalar bilinears [T. Prokopec, N. C. Tsamis, and R. P. Woodard, Classical Quantum Gravity 24, 201 (2007)], our current result also gives the two loop stress-energy tensor for inflationary scalar electrodynamics. This shows a secular decrease in the vacuum energy which derives from the vacuum polarization induced by the inflationary production of charged scalars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Magnetic moments of vector, axial, and tensor mesons in lattice QCD

We present a calculation of magnetic moments for selected spin-1 mesons using the techniques of lattice QCD. This is carried out by introducing a progressively small static magnetic field on the lattice and measuring the linear response of a hadron's mass shift. The calculations are done on 24{sup 4} quenched lattices using standard Wilson actions, with {beta}=6.0 and pion mass down to 500 MeV. The results are compared to those from the form factor method.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗