SEARCH · Search NASA

Results for “transmitters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Demonstration of Magnetron as an Alternative RF Source for SRF Accelerators

Magnetron has been considered as alternate high-efficiency, low-cost RF sources for linacs and storage rings [1] for national labs and industrial applications. After the demonstration of magnetrons power to drive and combine for a radio frequency cavity at 2450 MHz in CW mode, we have used trim coils adding to a water-cooled magnetron and amplitude modulation feedback to further suppress the side-band noise to -46.7 dBc level. We also demonstrated the phase-locking to an industrial grade cooking magnetron transmitter at 915 MHz with a 75 kW CW power delivered to a water load by using a -26.6 dBc injection signal [2]. The sideband noise from the 3-Phase SCRs DC power supply can be reduced to -16.2 dBc level. Further noise reduction and their power combining scheme using magic-tee and cavity type combiners for higher power application (2x75kW) are to be presented. We intent to use one power station to drive the normal conducting and superconducting RF cavities for the inductrial linac. We also going to demonstarte a vertical SRF cavity test with a high input coupling Q using a 2.45GHz magnetron and comparing with a baseline test result using a solid state amplifier.

Wang, H.↗

DOE OSTI2020

Encryption of Signal Pulses to Replace Tamper-indicating Conduit

In order to verify signal integrity and point of origin for TTL pulse data used in IAEA systems, and to avoid the need for expensive tamper-indicating conduit or electronic techniques, we propose the development of a signal pulse signing and encryption in-line device. In measurement applications in which the data acquisition electronics is separate from the enclosed, sealed detector, tamper-indicating techniques are required to protect raw TTL pulse streams between the detector and the data acquisition module, i.e UMSR. The goal of this proposed project is to design a rad-tolerant transmitter that would mount inside the sealed detector system and a receiver in the sealed electronics cabinet with the data acquisition instrument. This transmitter/receiver pair would digitally sign and encrypt the pulse stream data at the detector then transmit the data to the sealed cabinet where the receiver would decrypt the data and reproduce the original pulse stream. Existing tamper indicating techniques, such as LiveWire’s spread spectrum time domain reflectometry rely on detecting physical changes to the wiring system and can be blind to fast coupling of micro-second wide pulses. Digital signing and encryption techniques such as the Sandia Laboratories Enhanced Data Authentication System (EDAS) are capable of encrypting communications data, i.e. RS-232, but are not capable reproducing a critical time correlated data streams. Recent NA-241 Safeguards Technology supported developments have reduced the need for special conduit to transmit data via Ethernet by incorporating the IAEA RAINSTORM data encryption and authentication protocol, a tamper indicator is still required to protect raw pulse data from detectors to the acquisition electronics. Encrypting pulse data is especially complicated for radiation detection instruments due to the time correlation data analysis that is performed on this data stream. Any corruption in the timing information will produce errors in measurement values.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Southwest Wind Power R&D Test Site Development at the National Wind Technology Center (CRADA CRD-12-00472 Final Report)

Southwest Windpower, Inc. (SWWP) has been designing and distributing small wind turbines for more than 22 years and is the recognized global leader in the design, manufacturing and distribution of small wind systems (400-3000 watts). The company has been a pioneer in the development of wind technology and has built and shipped more than 170,000 wind turbines to over 120 countries worldwide. Headquartered in Flagstaff AZ, SWWP has sales representatives in over 88 countries. Applications for SWWP systems include residential homes, commercial properties, micro grids, remote cabins, telecom transmitters, offshore platforms, water pumping and sailboats. In addition, U.S. Department of Defense uses SWWP’s products in Forward Operating Bases (FOB’s), USGS uses them for remote monitoring of glacier movements and the CIA uses them to provide power seismic monitoring. Today, SWWP plans development of new technologies to address distributed energy market needs and become even more aggressive in international markets. This strategy includes extensive Research, Development, Demonstration & Deployment (RDD&D) activities to improve existing production line into more simple, reliable, and cost-effective wind turbine systems. Important part of such activities is the field testing of the new systems, which should provide: (i) validation of the reliable operation of hardware and software; (ii) validation of numerical models of the system and its components; (iii) field comparison of various control and optimization strategies; (iv) customized reliability testing; (v) customized monitoring and analysis testing; and (vi) IEC certification testing (vii) filed demonstration of system performance and reliability. Such field testing facility should encompass multiple towers and appropriate data acquisition systems. SWWP is exploring to move part of the engineering department to Colorado, and execute its RDD&D strategies in this new location. Partnership with NREL will provide great insights into SWWP’s RDD&D processes and more efficient commercialization by utilizing NWTC as the field testing site, and working close with NREL personnel. NWTC is ideally suited to strain the design. NREL is very experienced with customized and IEC testing. During this project, Southwest Windpower aims to improve the value proposition of distributed renewable energy, and make it a competitive choice in the energy markets. As of today, more then 170,000 small wind turbines, manufactured in the U.S., are installed in more then 180 countries. With the improved value proposition, Southwest Windpower wants to create and address new market needs, substantially increase its sales domestically and internationally, which should have positive impact on the creation of American jobs, competitiveness of U.S. economy, export or U.S. products, and the use of renewable energy.

17 WIND ENERGY↗

DOE OSTI2020

Bistatic Synthetic Aperture Radar - Issues Analysis and Design

The physical separation of the transmitter from the receiver into perhaps separate flight vehicles (with separate flight paths) in a bistatic Synthetic Aperture radar system adds considerable complexity to an already complex system. Synchronization of waveform parameters and timing attributes become problematic, and notions of even the synthetic aperture itself take on a new level of abstractness. Consequently, a high-performance, fine-resolution, and reliable bistatic SAR system really needs to be engineered from the ground up, with tighter specifications on a number of parameters, and entirely new functionality in other areas. Nevertheless, such a bistatic SAR system appears viable.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

Robust and Spectrally Selective Aerogels for Solar Receivers

The development of next generation concentrated solar thermal (CST) plants requires solar receivers to reach high temperatures (> 600°C) while minimizing costs. Efficiently generating such high temperatures using a line-focusing collector and an air-stable receiver has the potential to change the current CSP paradigm because it would: (1) result in large improvements in system-level efficiency of line-focusing systems by enabling the use of high-efficiency supercritical CO 2 power cycles; (2) decrease the LCOE of line-focusing systems to meet SETO 2030 goals; (3) maintain performance over the lifetime of the CSP plant by avoiding issues related to breakdown of vacuum. The use of aerogels as transparent insulating materials (TIMs) in solar thermal receivers has the potential to enable such improvements. Specifically, aerogels can be placed in front of a black (or partially selective) high-temperature absorber to allow sunlight to transmit to the absorber but block heat from escaping. These materials can improve the efficiency and simplify the complexity of thermal transport systems by enabling operation at moderate or no vacuum levels. These potential benefits have been explicitly identified by SETO as ‘high impact’. The use of mesoporous silica as a TIM has already led to large improvements in solar collection efficiency. Nevertheless, these materials inherently lose structural integrity and the ability to suppress radiation losses at high temperatures. Here, we address these challenges by leveraging 1-cycle atomic layer deposition of aluminum oxide onto a silica aerogel to form a thermally stable interfacial layer that is transparent to sunlight but broadly absorbs in the mid-infrared. This interfacial absorption results in a two-fold reduction in measured heat losses from an absorber at 700°C and solar thermal efficiency of 81% at 700°C under 60 Suns, based on measurements of heat loss and solar transmittance. Extended-duration heat treatment reveals that the multicomponent aerogel is stable at high temperatures relative to a silica aerogel. Furthermore, we experimentally demonstrate the concept of using infrared plasmon resonances to selectively enhance the thermal absorption coefficient of TIMs in order to strongly suppress thermal radiative losses at high temperatures. We term this mechanism plasmon-enhanced greenhouse selectivity (PEGS). Unlike silica aerogels, where much of the IR absorption is lost at high temperatures, local surface plasmon resonances (LSPRs) in doped oxide nanoparticles overlap a significant portion of the blackbody spectrum and are maintained at high temperatures. Overall, this work paves the way for next-generation solar thermal energy using thermally robust transparent insulating materials.

14 SOLAR ENERGY↗

DOE OSTI2020

Robust and Spectrally Selective Aerogels for Solar Receivers (Final Technical Report)

The development of next generation concentrated solar thermal (CST) plants requires solar receivers to reach high temperatures (> 600°C) while minimizing costs. Efficiently generating such high temperatures using a line-focusing collector and an air-stable receiver has the potential to change the current CSP paradigm because it would: (1) result in large improvements in system-level efficiency of line-focusing systems by enabling the use of high-efficiency supercritical CO2 power cycles; (2) decrease the LCOE of line-focusing systems to meet SETO 2030 goals; (3) maintain performance over the lifetime of the CSP plant by avoiding issues related to breakdown of vacuum. The use of aerogels as transparent insulating materials (TIMs) in solar thermal receivers has the potential to enable such improvements. Specifically, aerogels can be placed in front of a black (or partially selective) high-temperature absorber to allow sunlight to transmit to the absorber but block heat from escaping. These materials can improve the efficiency and simplify the complexity of thermal transport systems by enabling operation at moderate or no vacuum levels. These potential benefits have been explicitly identified by SETO as ‘high impact’. The use of mesoporous silica as a TIM has already led to large improvements in solar collection efficiency. Nevertheless, these materials inherently lose structural integrity and the ability to suppress radiation losses at high temperatures. Here, we address these challenges by leveraging 1-cycle atomic layer deposition of aluminum oxide onto a silica aerogel to form a thermally stable interfacial layer that is transparent to sunlight but broadly absorbs in the mid-infrared. This interfacial absorption results in a two-fold reduction in measured heat losses from an absorber at 700°C and solar thermal efficiency of 81% at 700°C under 60 Suns, based on measurements of heat loss and solar transmittance. Extended-duration heat treatment reveals that the multicomponent aerogel is stable at high temperatures relative to a silica aerogel. Furthermore, we experimentally demonstrate the concept of using infrared plasmon resonances to selectively enhance the thermal absorption coefficient of TIMs in order to strongly suppress thermal radiative losses at high temperatures. We term this mechanism plasmon-enhanced greenhouse selectivity (PEGS). Unlike silica aerogels, where much of the IR absorption is lost at high temperatures, local surface plasmon resonances (LSPRs) in doped oxide nanoparticles overlap a significant portion of the blackbody spectrum and are maintained at high temperatures. Overall, this work paves the way for next-generation solar thermal energy using thermally robust transparent insulating materials.

14 SOLAR ENERGY↗

DOE OSTI2021

Literary review and modeling outlook for radiation damage in fused-silica optical fibers

The purpose of this document is to distill, from literature, the effects of radiation damage in fused-silica optical fibers. This information will be used to design a theoretical framework capable of predictive modeling that will be published elsewhere. By inspection of the relevant literature, the devised method is calculation of defect amorphous structures by molecular dynamic techniques, and computation of the macroscopic dielectric function using density functional theory. The dielectric function is then used to directly compute the transmittance of the core material before and after irradiation via solution of Maxwell’s equations in a homogeneous medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Study of quasi-collisional effects in laboratory and astrophysical plasmas

High-amplitude turbulence excited in plasmas at small-scales can leave imprint on the radiation produced by (accelerated) plasma particles -- mostly electrons in electron-ion plasmas and both electrons and positrons in lepton pair plasmas. Furthermore, turbulence is known to introduce "effective collisional" effects -- anomalous resistivity, dissipation, diffusion, etc. -- in the otherwise collisionless plasmas. These effective collisions affect radiation transfer and modify optical and magneto-optic effects -- the transmittance and reflectivity coefficients, Faraday rotation, etc. Note that the effective collisions considered in this project are not resonant wave-particle interactions, but much less conventional randomization of particles’ paths. Therefore, we colloquially refer them to as "quasi-collisions". The study of quasi-collisions on transport, radiative and optical properties of plasmas is the main focus of this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Material Characterization of Grade 91 Steel Welds using, Micro-resolution Ultrasonic Imaging System

Grade 91 (9Cr-1Mo-V) steel is a common structural material for fossil-fuel fired and nuclear power plants because of its creep strength and oxidation resistance at high temperatures. In this research, we studied the feasibility of correlating the high-resolution images obtained from the immersion ultrasonic imaging technique to microstructure regions in Grade 91 steel plate weldments. The high-resolution ultrasonic images presented in this paper were generated using a 20-MHz focused transducer as the transmitter, and a laser vibrometer as the receiver in the through transmission configuration to produce longitudinal and shear waves. This nondestructive evaluation (NDE) method was used to identify the Fusion Zone (FZ), Heat-Affected Zone (HAZ), and Base Metal (BM) regions of Grade 91 cold metal transfer (CMT) and flux core arc welds (FCAW). The ultrasonic imaging results were analyzed using beam propagation amplitudes and homogeneity, which in turn were used to relate the different microstructure regions of the FCAW and CMT welded samples. With this study, we were able to identify highly susceptible microstructures in the weld that could potentially promote creep type failures.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2022

Cellular Shade Energy Savings in a Commercial Setting

Windows cause approximately 1.7 quad of heating and cooling energy consumption in the United States. This energy consumption can be reduced by using high-efficiency window attachments. Common Venetian blinds and planar shades, such as roller shades, might block solar radiation, but they do not provide a significant improvement to window system thermal transmittance. Cellular shades have better thermal performance compared to other shading devices because of the honeycomb structure that traps air in pockets to create thermal insulation. However, evaluating the energy savings potential of cellular shades using experimental testing in commercial settings is limited. Moreover, the effect of cellular shades on daylighting and glare is yet to be evaluated using field testing. In this study, experimental testing of cellular shades was performed in a real building with emulated occupancy for both a cooling and a heating season. Compared with a room without shades, the use of cellular shades in experimental testing showed incremental energy savings of 4.6% to 9.4% for cooling and higher than 20% for heating. The experimental data were used to calibrate the baseline energy model and validate the cellular shades model. Annual simulation of cellular shades was performed for a medium office prototype building using the validated cellular shades model. The annual simulation was performed in Phoenix, Nashville, and Rochester. The annual savings for HVAC energy was 25% for Phoenix, 27% for Nashville, and 19% for Rochester.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Silver Nanowire-Indium Zinc Oxide Composite Flexible Transparent Conducting Electrodes Made by Spin- coating and Photonic Curing

Realizing high-throughput, low-cost perovskite solar cell (PSC) manufacturing is highly sought-after in photovoltaic (PV) research in recent years. To fully achieve roll-to-roll (R2R) manufacturing of PSCs, it is important to consider the flexible transparent electrode (TE). PET/ITO is a commonly used substrate for making flexible PSCs. When optimizing transparent conducting materials, there is a tradeoff between sheet resistance (Rsh) and optical transparency. Because commercial PET/ITO substrates are made with slow (~1 m/min) vacuum deposition processes, they tend to be expensive. Therefore, it would be advantageous to develop a high-throughput, R2R compatible, solution-deposition approach for fabricating the TE on PET substrates. While various solution-deposition processes, such as blade coating or slot-die coating, can achieve the desired web speed of > 10 m/min, there is still a need to improve the post-deposition annealing step. One promising post-deposition processing technique is intense-pulsed-light processing, also known as photonic curing. Photonic curing delivers short (0.01 – 100 ms) pulses of broadband (200 – 1500 nm) light from a xenon flash lamp to the samples. Any materials in the sample stack that absorb light will convert the impinging light pulse into heat within the sample, which drives changes in the sample (calcination, phase change, crystallization, etc.). Photonic curing has three main advantages over thermal annealing: 1. Faster processing speed (milliseconds or seconds). 2. Compatibility with plastic substrates. 3. Smaller physical footprint and less wasted energy. Since the light pulses are on for a short time, the intensity can be high while the total energy delivered to the sample is low, minimizing damages to the plastic substrates. In this work, a hybrid TE material is fabricated on PET substrates using photonic curing. The hybrid TE material contains a layer of silver nanowires (AgNWs) and a layer of metal-oxide (InOx, ITO, IZO, etc.). The AgNWs increase the light absorbed by the film during the photonic curing process, which leads to higher processing temperatures, possibly improving the conversion of the metal-oxide layer. The AgNWs also enhance the electrical conductivity of the final TE layer after photonic curing. A AgNW and metal-oxide bilayer is formed by spin coating each solution onto the PET substrate sequentially followed by a single photonic curing process. We use average optical transmittance (Tavg) from 400 to 700 nm and average Rsh to evaluate the TE performance. The following photonic curing parameters are varied to optimize Tavg (maximize) and Rsh (minimize): Pulse voltage, pulse envelope, number of micro-pulses, duty cycle, number of pulses, and pulse repetition rate. Preliminarily, we also observe a significant impact on the TE properties by the volume of AgNW deposited during the spin coating deposition step. Using dispense volumes of 80 µL and 20 µL, we achieve samples with Tavg = 73%, Rsh = 19 Ω/sq, and roughness = 9 nm, and Tavg = 83%, Rsh = 58 Ω/sq, and roughness = 5.6 nm, respectively, after photonic curing.

14 SOLAR ENERGY↗

DOE OSTI2023

Substrate Effects When Using Photons to Make Perovskite Solar Cells

To shorten annealing time and minimize substrate heating, flash lamps that deliver short, intense light pulses, commonly called photonic curing, are used to replace thermal annealing using hot plates or ovens. This method is different from equilibrium heating in that the radiant energy is selectively absorbed by the film. The high-intensity light pulses produce a high peak temperature in the film. Because most processes follow Arrhenius behavior, reaching high temperatures allow chemical reactions/phase transformations to occur in a short time, significantly reducing the processing time. Often the results are non-intuitive. We will present fabricating flexible halide perovskite solar cells (PSCs) on indium tin oxide (ITO) coated Willow glass. The effect of ITO transmittance on the photonic curing of nickel nitrate sol-gel precursors into nickel oxide to fabricate hole transport layer and consequently the performance of PSCs. Unexpectedly, ITO samples processed by photonic curing show improved optical and electrical properties.

14 SOLAR ENERGY↗

DOE OSTI2023

Time-domain simulation of the crab cavity/beam interaction

The Electron-Ion Collider (EIC) will employ crab cavities to maximize luminosity. A time-domain simulation is developed to study the interaction between the particle beam and the crab cavities in the EIC, including the Low-Level RF (LLRF) feedback loops. The simulation is validated through power and induced voltage estimates. We then use the simulation tool to study the beam loading effects on the crabbing voltage and thus on the beam transverse position and tilt. We also study the crabbing voltage regulation and transmitter power transients as a function of the LLRF design.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Radiation-Hardened GaN-Based Wireless Communications Architectures for Terrestrial Nuclear Reactor Sensing and Instrumentation

Wireless technologies have become increasingly common in applications, ranging from close proximity inductive communication links in medical devices to short-range Bluetooth and WiFi communications and longer-range cellular communications. Nonetheless, these technologies are unsuitable for use in or around nuclear reactors due to the extreme radiation and temperatures inherent in these environments and their associated significant degradative effects on electronics hardware. However, recent work in wide bandgap– based electronics has shown promise for gallium nitride (GaN) as an emerging technology for the realization of practical wireless communications systems for use in harsh environments. This report presents initial progress on the development of wireless communications architectures designed specifically for nuclear reactor application, based on inherently radiation-hardened (rad-hard) GaN technology. Prior work on rad-hard analog communications topologies is reviewed, and several digital modulation and encoding schemes that utilize GaN-based electronics devices are newly proposed for application in reactor environments. Continuous-time and discrete-time system simulations were performed, and results are presented for the preliminary transmitter and receiver designs, respectively. In addition, an overview of a software-defined radio testbed, designed for communications protocol development, is provided. Future work will focus on implementing candidate radiation-resistant wireless architectures using a research AlGaN/GaN high electron mobility transistor (HEMT) integrated circuit process, which is available at the Ohio State University, and irradiation studies will be carried out to assess the true potential of this technology for reactor application.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Compact, high-power superconducting radio-frequency accelerators for environmental applications

Electron-beam irradiation has been proven to destructively reduce or eliminate a wide variety of organic chemicals, viruses and bacteria from wastewater, as well as reducing sulfur and nitrous oxides emission from coal-fired power plants. It is estimated that there are approximately 30,000 such particle accelerators in use worldwide for industrial processes including surface and bulk processing of material, medical sterilization, and environmental remediation. Maximum beam power from accelerators used in these applications is currently limited to less than 500 kW, and a higher beam power is needed to reduce treatment costs. The market availability of continuous-wave (CW) electron-beam accelerators with power of the order of ~100 kW is also very limited. Superconducting radio-frequency (SRF) linear accelerators (linacs) are commonly used at basic research laboratories throughout the world due to their exceptionally high efficiency as compared to current industrial varieties. Recent advances in cryogenics, SRF thin films and high-power magnetrons allow for the design of increasingly compact and efficient CW SRF electron linacs in the energy range 1-10 MeV, with up to 1 MW of beam power. A new class of compact, high-efficiency electron-beam accelerators may provide cost-effective solutions for a range of industrial and environmental remediation applications, particularly with respect to tackling one such class of contaminants so-called forever chemicals, including per- and polyfluoroalkyl substances (PFASs), which are ubiquitous in a wide range of products and for which there is currently no effective destruction technology. We have recently demonstrated the key technologies required for such accelerators by: 1) operating a Nb3Sn SRF accelerating cavity cooled by commercial cryocoolers up to an accelerating gradient of 12.4 MV/m and 2) demonstrating the phase-locking as well as a high-efficiency power combining scheme for industrial magnetron transmitters. In this presentation, we will introduce the principles and benefits of MW-class SRF linacs, based on the conduction-cooled SRF technology that we have demonstrated for environmental remediation. We propose the development of a 4 MeV, 20 kW prototype to be built at Jefferson Lab as a first accelerator demonstrator unit. We will also present the results from samples study on the effect of electron-beam irradiation on so-called forever chemicals such as 1,4-dioxane and PFAS, using an existing multi-purpose 10 MeV, low-power, CW SRF linac at Jefferson Lab.

Ciovati, Gianluigi↗

DOE OSTI2024

"Soiling, Cleaning, and Abrasion: The Results of the Five-Year Photovoltaic Glass Coating Field Study" [Slides]

External contamination ("soiling") of the incident surface is a major limiting factor for solar technologies. A 5-year field glass coupon study was conducted to better understand external contamination and its effects; compare cleaning methods and the use of preventative coatings; and explore the abrasion resulting from cleaning to advise on accelerated abrasion testing. Test sites included the cities of Dubai (UAE), Kuwait City (Kuwait), Mesa (AZ), Mumbai (India), and Sacramento (CA). Through the 5-year cumulative study, dry brush, water spray, and wet sponge and squeegee cleaning methods were compared to no cleaning. Optical microscopy was used to obtain images, including representative color images, grayscale images for object analysis, and oblique images for coating integrity assessment. A thresholding protocol was developed to analyze and distinguish specimens using the ImageJ software. Optical performance was quantified using a spectrophotometer, including comprehensive optical characterization (transmittance, reflectance, and absorptance in addition to forward- and back-scattering). Atomic force microscopy was used to verify the abrasion damage morphology, including the width and depth of surface scratches. Analysis of the results included correlation of optical performance and particle area coverage, rank order (by coating or location), and the acceleration factor for abrasion damage. The efficacy of external cleaning was more readily distinguished from the effectiveness of antisoiling coatings. The acceleration factor for dry brush cleaning of a porous silica coating was found to be on the order of unity.

14 SOLAR ENERGY↗

DOE OSTI2024

Quantification of the Crack Evolution Process by Extracting Relevant Signal Components from Wave Propagation and Diffusive Transport Front Measurements

Wave propagation and diffusive transport phenomena in a geological rock sample undergoing crack evolution process are expected to interact with the mechanical discontinuities in the medium. The measurements of the signals associated with these phenomena can be used to assess and monitor the crack-driven micromechanical alterations in the rock. Different wave/diffusion phenomena, such as sonic propagation, pressure diffusion, and acoustic emission (AE), are sensitive to different elements of the mechanical discontinuities generated during the evolution of the crack clusters from initiation to coalescence. Sonic propagation, AE, and pressure diffusion monitoring have the potential to map the crack evolution because the transmitter-receiver arrays can be designed, arranged and tuned to (1) achieve maximum recovery of the scattered waveforms and travel times, (2) capture the later arrivals and multiple reflections, and (3) illuminate large rock volume. However, the structural/topological complexities of the mechanical discontinuities, complex distribution of the stress fields, complex mechanical alterations in media, and fluid redistribution in the crack system pose serious challenges for the detection and modeling of the crack evolution process (from here on, we will use the term ‘crack evolution process’ to mean that the crack evolution occurred under shallow crustal conditions). For purposes of accurately accounting such complexities and heterogeneities in the absence of reliable physical laws, simulation methods, and signal processing techniques, my early-career research proposal will develop and apply novel data-driven machine learning methods to: (1) extract signal components relevant to the various phases of crack evolution and (2) generate a 2D visual map of the crack evolution process.

58 GEOSCIENCES↗

DOE OSTI2024

Electromagnetic inversion for a baseline conductivity model at the Kemper CarbonSAFE site

Geophysics is one component of a successful monitoring strategy for carbon storage sites. Seismic surveys are a common element of these strategies, with repeat surveys occurring about every 5 years. However, seismic is expensive, the sensitivity to CO2 saturation is limited, and it requires a large footprint on the surface (Yurikov et al., 2022). Electromagnetic (EM) methods offer repeat surveys at a significantly lower cost, the ability to utilize airborne methods to increase coverage, and potentially provide enough information to increase the time between seismic surveys. Specifically, we focus on semi-airborne EM, with a grounded dipole transmitter, and airborne magnetic field receivers as described and modeled in Kohnke et al. (2023).

Kohnke, Colton↗