Search NASA⌕ Search

SEARCH · Search NASA

Results for “traversibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Gas sampling method for determining pollutant concentrations in the flame zone of two swirl-can combustor modules

A gas sampling probe and traversing mechanism were developed to obtain detailed measurements of gaseous pollutant concentrations in the primary and mixing regions of combustors in order to better understand how pollutants are formed. The gas sampling probe was actuated by a three-degree-of-freedom traversing mechanism and the samples obtained were analyzed by an on-line gas analysis system. The pollutants in the flame zone of two different swirl-can combustor modules were measured at an inlet-air temperature of 590 K, pressure of 6 atmospheres, and reference velocities of 23 and 30 meters per second at a fuel-air ratio of 0.02. Typical results show large spatial gradients in the gaseous pollutant concentration close to the swirl-can module. Average concentrations of unburned hydrocarbons and carbon monoxide decrease rapidly in the downstream wake regions of each module. By careful and detailed probing, the effect of various module design features on pollutant formation can be assessed. The techniques presently developed seem adequate to obtain the desired information.

Duerr, R. A.↗

Modeling of turbine blade tip contact

A mathematical model is developed to evaluate a number of physical effects in turbomachine blade tip contact on the basis of a broad brush approach to provide insights without undue complexity. The analysis is restricted to the case of a shoe encountering a moving blade row and pressing against it with a fixed time-average force. Relative displacement components in the contact region are identified and determined. Two key equations are derived, where it is shown that wear rate plays a strong role in determining the traversal speed of the contact patch. The formula for estimating the size of the contact patch shows that the higher the traversal speed is, the wider is the contact patch.

Burton, R. A.↗

On the occurrence of magnetopause crossings at 6.6 RE

The vector magnetometer data from the ATS-1 spacecraft in synchronous orbit for the period of December 1966 to December 1968 were scanned. Magnetopause crossings were identified by sudden changes in field magnitude accompanied by directional changes and increased noise levels. There was little difficulty in identifying magnetopause traversals near noon at synchronous orbit within 6.6 earth radii. Magnetopause traversals were observed on 5 of the 545 days, ranging in duration from 1 min to over 3 hr. Extrapolating the magnetopause crossing statistics to lower radial distances linearly on a semilog plot suggests that the noon magnetopause is flatter at disturbed times than at quiet times.

Russell, C. T.↗

Automatic control of a mobile Viking lander on the surface of Mars

A mobile lander system is being considered for use in a possible follow-on mission to the Viking '75 landings on Mars. A mobile Viking lander, which could be launched as early as the 1979 opportunity, would be capable of traversing 100 m to 1 km per day on a commanded heading while sensing hazards and performing avoidance maneuvers. The degree of autonomous control, and consequently the daily traverse range, is still under study. The mobility concept requires the addition of: (1) track-laying or wheel units in place of the Viking Lander footpads, (2) a set of hazard and navigation sensors, and (3) a mobility control computer capability. The technology required to develop these three subsystems is available today. The principal objective of current design studies, as described in this paper, is to define a mobile lander system that will demonstrate high reliability and fail-safe hazard avoidance while achieving range- and terrain-handling capabilities which satisfy the Mars exploration science requirements.

Moore, J.↗

Ionospheric and magnetospheric plasmapauses'

During August 1972, Explorer 45 orbiting near the equatorial plane with an apogee of about 5.2 R sub e traversed magnetic field lines in close proximity to those simultaneously traversed by the topside ionospheric satellite ISIS 2 near dusk in the L range 2-5.4. The locations of the Explorer 45 plasmapause crossings during this month were compared to the latitudinal decreases of the H(+) density observed on ISIS 2 near the same magnetic field lines. The equatorially determined plasmapause field lines typically passed through or poleward of the minimum of the ionospheric light ion trough, with coincident satellite passes occurring for which the L separation between the plasmapause and trough field lines was between 1 and 2. Vertical flows of the H(+) ions in the light ion trough as detected by the magnetic ion mass spectrometer on ISIS were directed upward with velocities between 1 and 2 kilometers/sec near dusk on these passes. These velocities decreased to lower values on the low latitude side of the H(+) trough but did not show any noticeable change across the field lines corresponding to the magnetospheric plasmapause.

Grebowsky, J. M.↗

Magnetic heat pumping

A ferromagnetic or ferrimagnetic element is used to control the temperature and applied magnetic field of the element to cause the state of the element as represented on a temperature-magnetic entropy diagram to repeatedly traverse a loop. The loop may have a first portion of concurrent substantially isothermal or constant temperature and increasing applied magnetic field, a second portion of lowering temperature and constant applied magnetic field, a third portion of isothermal and decreasing applied magnetic field, and a fourth portion of increasing temperature and constant applied magnetic field. Other loops may be four-sided, with two isotherms and two adiabats. Preferably, a regenerator is used to enhance desired cooling or heating effects, with varied magnetic fields, or varying temperatures including three-sided figures traversed by the representative point.

Brown, G. V.↗

Implications of very long baseline interferometry measurements on North American intra-plate crustal deformation

Very Long Baseline Interferometry experiments over the last 1-3/4 years between Owens Valley, CA and Haystack, MA Radio Observatories suggest an upper limit of east-west crustal deformation between the two sites of about 1 cm/yr. In view of the fact that the baseline between the two sites traverses most of the major geological provinces of the United States, this low rate of crustal deformation has direct relevance to intra-plate crustal tectonics. The most active region traversed by this baseline is the Basin and Range province, which was estimated by various researchers to be expanding in an east-west direction at rates of .3 to 1.5 cm/yr. The Colorado Plateau and Rocky Mountain system also appear to be expanding, but at a somewhat lower rate, while east of the Rocky Mountains, the predominant stress appears to be compressional, nearly horizontal, and east to northeast trending.

Allenby, R. J.↗

An axial flow research compressor facility designed for flow measurement in rotor passages

An axial flow research compressor facility, which is designed for relative flow measurement, is described in this paper. The facility has a rotating probe traverse mechanism which is capable of traversing hot wire, pitot and other probes at 0.09 deg intervals across the rotor blade passage. The data transmission system includes rotating transducers, pressure transfer device, ten-channel mercury slip ring unit, scanivalve, etc. The instrumentation includes on-line data processing capability. A brief description of probes used as well as some typical data on the rotor blade static pressure, rotor endwall flow and rotor wake characteristics are given in the paper.

Lakshminarayana, B.↗

Modeling of growth, evaporation and sedimentation effects on transmission of visible and IR laser beams in artificial fogs

The dense polydisperse aerosol particles in a quiet chamber may spontaneously go through different microphysical processes including gravitational sedimentation, thermal coagulation, and growth or evaporation. In an earlier paper, we presented the results of a parametric study of the combined and separate effects of thermal coagulation and sedimentation on the time dependence of extinction of four visible and IR laser beams traversing an aerosol medium. As a continuation of this series of studies, the separate and combined effects of growth or evaporation and gravitational sedimentation on the time dependence of extinction of the same four visible and IR laser beams traversing in artificial fogs will be reported in this paper. The method of numerically modeling the change of water droplet size distribution with time due to growth/evaporation and the cutoff of larger aerosols due to gravitational sedimentation is described in detail. Factors governing the relative importance of these two processes are discussed. Results of this study show that the relative humidity or ambient temperature is a crucial parameter in determining the optical depth of the water droplet and aerosol media undergoing microphysical processes.

Yue, G. K.↗

Fresnel zone structure in planetary occultations

The structures of the Fresnel zones of an occulting body with a substantial atmosphere are analyzed. The first Fresnel zone is defined as the set of all contiguous points connected to the transmitter and receiver via paths with a combined length within one half wavelength of the stationary value, and calculated by the application of the Huygens-Fresnel principle to a wave front frozen in time as it traverses the region of interest, taking into account wave front curvature of waves undergoing refraction. Calculations of the Fresnel zones of a planet determined by the meeting of wave fronts represented as tori reveal that the zone along the propagation path traversing the nearest portion of the limb to the transmitter has a shape similar to an ellipse, while that of the far zone resembles the letter X. The phase delay along the farside path is found to be a stationary point rather than a minimum, since delay is distributed in the form of a hyperbolic paraboloid near the ray and in the form of a torus intersection for greater separations. Examples are presented for S band propagation deep in the atmospheres of Venus and Jupiter.

Croft, T. A.↗

Dawn-dusk asymmetry of the tail region of the magnetosphere of Saturn and the interplanetary magnetic field

In connection with the findings of the Voyager 1 mission, it appears that the tail lobe of Saturn is very different from that of earth and Jupiter, in that the latter are devoid of energetic particles, and magnetic field lines in this region are thought to be open and interconnecting with the interplanetary magnetic field at large distances in the antisolar direction. The present investigation is concerned with a possible explanation of these observations, taking into account a model of Saturn's magnetosphere. It is shown that the Voyager 1 spacecraft remained in the closed region of the magnetotail during its entire tail traversal and did not have an opportunity to penetrate into the high latitude lobe. It is concluded that Saturn probably has a tail lobe just like earth and Jupiter. However, this tail lobe was not traversed by Voyager.

Akasofu, S.-I.↗

The triangle compare method of hidden-line elimination

An original algorithm which solves the classical computer graphics problem of eliminating those lines that should not be visible in a wire-frame model representation of a solid figure is presented. The basis of this Triangle Compare algorithm is that any polygon, regardless of its complexity, can be constructed from a set of triangles. In the Triangle Compare algorithm, once the triangles defining the figure are defined, they are ordered based on the nearness of each triangle to the viewer and stored in a linked list. The nearest triangle are compared to all succeeding triangles. The remaining parts of triangles are synthesized into other triangles and are added in order to the linked list. Subsequent reference triangles are provided by a traversal of the linked list. After the entire list is traversed and each triangle used as a reference, the resulting list is used for a final rendering with hidden lines removed via calligraphic MOVE and DRAW commands.

Price, C. R.↗

Experimental investigation of shock-cell noise reduction for single-stream nozzles in simulated flight, comprehensive data report. Volume 2: Laser velocimeter data

Mean velocity (axial component) and turbulent velocity (axial component) measurements for thirty one selected flow conditions of six models were performed employing the Laser Doppler Velocimeter Aerodynamic conditions which define the test points are given. Tabulations which explain the scope of mean velocity traverses and turbulence histogram measurements are also presented. The actual LV position, the type of traverse, and measured mean and turbulent velocities along copies of the LV mean velocity traces are contained.

Yamamoto, K.↗

Jakobshavns Glacier drainage basin - A balance assessment

Maximum and minimum estimates are made of the drainage basin feeding the Jakobshavns Glacier by using surface elevation maps derived from Seasat altimetry. Benson's (1962) net balance measurements are used to calculate the balance flow within the basin. Comparisons of the balance flux at the terminus with estimates of actual flux suggest the basin is in overall equilibrium or slightly thickening. This agrees with measurements along the nearby EGIG traverse. Balance velocities accelerate rapidly within 100 km of the coast. Farther upstream, balance velocities are consistent with both measured velocities along the EGIG traverse and calculated deformation velocities. It is estimated that Jakobshavns Glacier discharges between 4.8 and 7.6 percent of the annual net balance over Greenland and drains between 3.7 and 5.8 percent of the ice sheet area.

Bindschadler, R. A.↗

Energetic particle observations in the low-latitude boundary layer

Energetic (approximately equal to or greater than 24 keV) particle three-dimensional distributions are presented, taking into account a dawnside (approximately 0515 LT) and duskside (approximately 1845 LT) traversal of the magnetopause boundary regions during periods of northward magnetosheath magnetic field. The boundary region traversed is identified as the low-latitude boundary layer (LLBL) on the basis of survey plasma data, the energetic particle distributions, and magnetic field behavior. The main features of the energetic particle data for these two passes are discussed. On the basis of an analysis of the obtained data, it is concluded that the dawn and dusk LLBL are on closed geomagnetic field lines. It is found that the plasma sheet is the main source of energetic LLBL particles. The possibility exists that the tailward convecting particles in the LLBL reenter the plasma sheet at some further distance in the tailward direction.

Williams, D. J.↗

Comparison of computations and experimental data for leading edge vortices - Effects of yaw and vortex flaps

Computations are presented using the conical Euler equations for swept delta wings with leading edge vortices. All the wings have sharp leading edges swept at 75 degrees to the freestream. In addition to an idealized flat plate model, geometrical features also included are thickness, centerbody, and two vortex flaps. Freestream Mach numbers of 1.7 to 2.8, angles of attack of 10 and 12 degrees, and angles of yaw of 0 and 8 degrees are considered. The computations are compared with pitot pressure traverses for one case. Other calculations are compared with pitot pressure traverses for one case. Other calculations are compared with surface pressure data and vapor screen pictures recently obtained at NASA Langley Research Center. The comparisons indicate that the dominant features of these flows are adequately modeled by the Euler equations, but viscous models are needed for the surface boundary layer and secondary separations.

Murman, E. M.↗

Adiabatic theory in regions of strong field gradients

The theory for the generalized first invariant for adiabatic motion of charged particles in regions where there are large gradients in magnetic or electric fields is developed. The general condition for an invariant to exist in such regions is that the potential well in which the particle oscillates change its shape slowly as the particle drifts. It is shown how the Kruskal (1962) procedure can be applied to obtain expressions for the invariant and for drift velocities that are asymptotic in a smallness parameter epsilon. The procedure is illustrated by obtaining the invariant and drift velocities for particles traversing a perpendicular shock, and the generalized invariant is compared with the magnetic moment, and the drift orbits with the actual orbits, for a particular case. In contrast to the magnetic moment, the generalized first invariant is better for large gyroradii (large kinetic energies) than for small gyroradii. Expressions for the invariant when an electrostatic potential jump is imposed across the perpendicular shock, and when the particle traverses a rotational shear layer with a small normal component of the magnetic field are given.

Whipple, E. C.↗

Variations in brightness temperature over cold first-year sea ice near Tuktoyaktuk, Northwest Territories

Microwave radiometric temperature T(B) profiles of first-year sea ice were obtained along 70- to 100-m traverses, with sled-mounted radiometers at 10, 18.7, 33.6, and 37 GHz and an effective spot size of 30 cm. Measurements of T(B) as a function of nadir angle were obtained at selected sites along the traverses. Snow and ice properties were recorded and correlated with the T(B) measurements to infer the effect of snow cover and ice conditions on the radiometric temperature. T(B) correlated positively with the brine volume profile in the ice at several sites, suggesting that brine volume has a strong effect on T(B) under these conditions. An overall statistical comparison of snow thickness with T(B), when compared with previously published models, suggests that the effect of snow cover on the microwave transmission coefficient of the snow/ice interface may be an important contribution to the radiometric temperature at these frequencies. A model is proposed to explain the data.

Lohanick, A. W.↗