SEARCH · Search NASA

Results for “turbulence model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1993

An algebraic turbulence model for turbomachinery

This paper presents a description and verification of RVC3D (rotor viscous code 3-D) which provides a Euler or Navier-Stokes analysis for steady three dimensional flows in turbomachinery. A motivation for this analysis is the calculation of turbine endwall heat transfer. Features of the turbulence model code include thin-layer formulation, Baldwin-Lomax or Cebeci-Smith turbulence models, node-centered finite difference formulation, and explicit four-stage Runge-Kutta time marching scheme. Results for flat plate, annular turbine cascade, turbine endwall heat transfer, and supersonic compressor blade test cases are presented.

Chima, Rodrick V.↗

NASA NTRS1992

A near-wall four-equation turbulence model for compressible boundary layers

A near-wall four-equation turbulence model is developed for the calculation of high-speed compressible turbulent boundary layers. The four equations used are the k-epsilon equations and the theta(exp 2)-epsilon(sub theta) equations. These equations are used to define the turbulent diffusivities for momentum and heat fluxes, thus allowing the assumption of dynamic similarity between momentum and heat transport to be relaxed. The Favre-averaged equations of motion are solved in conjunction with the four transport equations. Calculations are compared with measurements and with another model's predictions where the assumption of the constant turbulent Prandtl number is invoked. Compressible flat plate turbulent boundary layers with both adiabatic and constant temperature wall boundary conditions are considered. Results for the range of low Mach numbers and temperature ratios investigated are essentially the same as those obtained using an identical near-wall k-epsilon model. In general, the numerical predictions are in very good agreement with measurements and there are significant improvements in the predictions of mean flow properties at high Mach numbers.

Sommer, T. P.↗

NASA NTRS1980

Progress in turbulence modeling for complex flow fields including effects of compressibility

Two second-order-closure turbulence models were devised that are suitable for predicting properties of complex turbulent flow fields in both incompressible and compressible fluids. One model is of the "two-equation" variety in which closure is accomplished by introducing an eddy viscosity which depends on both a turbulent mixing energy and a dissipation rate per unit energy, that is, a specific dissipation rate. The other model is a "Reynolds stress equation" (RSE) formulation in which all components of the Reynolds stress tensor and turbulent heat-flux vector are computed directly and are scaled by the specific dissipation rate. Computations based on these models are compared with measurements for the following flow fields: (a) low speed, high Reynolds number channel flows with plane strain or uniform shear; (b) equilibrium turbulent boundary layers with and without pressure gradients or effects of compressibility; and (c) flow over a convex surface with and without a pressure gradient.

Wilcox, D. C.↗

NASA NTRS1990

The effect of turbulence models on the numerical prediction of the flowfield about a prolate spheroid at high angle of attack

The F3D thin-layer Navier-Stokes code presently used to numerically investigate the three-dimensional separated flow about a prolate spheroid at high incidence analyzes the effect of different turbulence models on the flowfield solution and the characteristics of the predicted flow. The Johnson-King (1984) model is applied in order to evaluate the importance of modeling nonequilibrium effects in predicting flow about a slender body at high incidence; the computations in question are for steady-state, fully turbulent flow. Insight is gained into the effects of turbulence models on flow characteristics, and model effects on the accurate prediction of highly separated and vortical flows about a slender body are demonstrated.

Gee, Ken↗

NASA NTRS1986

Multiple-scale turbulence model in confined swirling jet predictions

A recently developed multiple-scale turbulence model which attempts to circumvent the deficiencies of earlier models by taking nonequilibrium spectral energy transfer into account is presented. The model's validity is tested by predicting the confined swirling coaxial jet flow in a sudden expansion. It is noted that, in order to account for anisotropic turbulence, a full Reynolds stress model is required.

Chen, C. P.↗

NASA NTRS1996

Prediction of Airfoil Characteristics With Higher Order Turbulence Models

This study focuses on the prediction of airfoil characteristics, including lift and drag over a range of Reynolds numbers. Two different turbulence models, which represent two different types of models, are tested. The first is a standard isotropic eddy-viscosity two-equation model, and the second is an explicit algebraic stress model (EASM). The turbulent flow field over a general-aviation airfoil (GA(W)-2) at three Reynolds numbers is studied. At each Reynolds number, predicted lift and drag values at different angles of attack are compared with experimental results, and predicted variations of stall locations with Reynolds number are compared with experimental data. Finally, the size of the separation zone predicted by each model is analyzed, and correlated with the behavior of the lift coefficient near stall. In summary, the EASM model is able to predict the lift and drag coefficients over a wider range of angles of attack than the two-equation model for the three Reynolds numbers studied. However, both models are unable to predict the correct lift and drag behavior near the stall angle, and for the lowest Reynolds number case, the two-equation model did not predict separation on the airfoil near stall.

Gatski, Thomas B.↗

NASA NTRS1994

Investigation of supersonic jet plumes using an improved two-equation turbulence model

Supersonic jet plumes were studied using a two-equation turbulence model employing corrections for compressible dissipation and pressure-dilatation. A space-marching procedure based on an upwind numerical scheme was used to solve the governing equations and turbulence transport equations. The computed results indicate that two-equation models employing corrections for compressible dissipation and pressure-dilatation yield improved agreement with the experimental data. In addition, the numerical study demonstrates that the computed results are sensitive to the effect of grid refinement and insensitive to the type of velocity profiles used at the inflow boundary for the cases considered in the present study.

Lakshmanan, B.↗

DOE OSTI2026

Large Eddy Simulation of Low-Reynolds-Number Turbulent Flow of Low-Prandtl-Number Fluid in a Tight Lattice Bundle for Assessment of Reynolds-Averaged Navier-Stokes Turbulence Model

The MARVEL (Microreactor Applications Research Validation and Evaluation) microreactor utilizes natural circulation as core cooling mechanism and liquid metal as a primary coolant. Moreover, the reactor core has a pitch-to-diameter ratio of 1.056, which is considered a tight lattice configuration. Numerous studies have widely reported that Reynolds-Averaged Navier-Stokes (RANS) turbulence models inaccurately predict heat transfer in liquid metals and fail to capture flow pulsations that can occur within tight lattices, leading to further inaccuracies in simulation results. Therefore, evaluating the accuracy of RANS turbulence models in the thermal-hydraulic analysis of the MARVEL microreactor core is crucial for assessing reactor safety. In this study, a Large Eddy Simulation (LES) of the MARVEL microreactor core subchannel was conducted and compared with a RANS simulation to evaluate the accuracies and conservatism of the RANS model. The flow pulsation in a tight lattice predicted by LES enhanced the heat transfer, whereas the RANS model underpredicted it. Consequently, the RANS model predicted the peak cladding temperature higher than the LES model, but the discrepancy between the two approaches was not significant due to the good thermal characteristics of the liquid metal. It can be concluded that the steady-state RANS model is effective for the thermal analysis of liquid-metal-cooled MARVEL microreactor core and can provide conservative predictions from a safety analysis perspective.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

NASA NTRS1989

Three-dimensional application of the Johnson-King turbulence model for a boundary-layer direct method

The Johnson-King turbulence model as extended to three-dimensional flows was evaluated using finite-difference boundary-layer direct method. Calculations were compared against the experimental data of the well-known Berg-Elsenaar incompressible flow over an infinite swept-wing. The Johnson-King model, which includes the nonequilibrium effects in a developing turbulent boundary-layer, was found to significantly improve the predictive quality of a direct boundary-layer method. The improvement was especially visible in the computations with increased three-dimensionality of the mean flow, larger integral parameters, and decreasing eddy-viscosity and shear stress magnitudes in the streamwise direction; all in better agreement with the experiment than simple mixing-length methods.

Kavsaoglu, Mehmet S.↗

NASA NTRS1992

Nonequilibrium algebraic turbulence modeling considerations for transonic airfoils and wings

The nonequilibrium algebraic turbulence model of Johnson and King has been applied successfully to both airfoils and wings. However, in wing applications a different expression for the outer 'equilibrium' eddy viscosity has been used because of apparent difficulties in determining the boundary-layer thickness. It is shown in this paper, that this expression does not give eddy viscosity levels for two-dimensional flows that are consistent with Clauser's correlation for equilibrium turbulent boundary layers. And as a consequence, results in inferior predictions when used in airfoil calculations. The objective of this paper is to develop a formulation applicable to wing flows which reduces to the proper form in the two-dimensional case. This necessitates, in part, finding a better way of estimating the boundary-layer thickness from the computed flowfield.

Johnson, D. A.↗

NASA NTRS1993

Comparison of liquid rocket engine base region heat flux computations using three turbulence models

The flow in the base region of launch vehicles is characterized by flow separation, flow reversals, and reattachment. Computation of the convective heat flux in the base region and on the nozzle external surface of Space Shuttle Main Engine and Space Transportation Main Engine (STME) is an important part of defining base region thermal environments. Several turbulence models were incorporated in a CFD code and validated for flow and heat transfer computations in the separated and reattaching regions associated with subsonic and supersonic flows over backward facing steps. Heat flux computations in the base region of a single STME engine and a single S1C engine were performed using three different wall functions as well as a renormalization-group based k-epsilon model. With the very limited data available, the computed values are seen to be of the right order of magnitude. Based on the validation comparisons, it is concluded that all the turbulence models studied have predicted the reattachment location and the velocity profiles at various axial stations downstream of the step very well.

Kumar, Ganesh N.↗

NASA NTRS1993

Turbulence model evaluation for the prediction of flows over a supercritical airfoil with deflected aileron at high Reynolds number

Navier-Stokes solutions about a supercritical airfoil with aileron deflection have been computed using the CFL3D code coupled with the Baldwin-Lomax, Johnson-King, Baldwin-Barth, and Spalart-Allmaras turbulence models. Computations were made at a Mach number of 0.716 and chord Reynolds numbers of 5, 15, and 25 million. The airfoil was analyzed with both 0 deg and 2 deg (TED) aileron deflections. Comparisons over a range of angles-of-attack showed that solutions obtained using the Baldwin-Barth turbulence model presented the best agreement with experimental pressures and sectional lift coefficients. However, Reynolds number trends in sectional lift coefficient and in aileron effectiveness were not predicted consistently.

Londenberg, W. K.↗

NASA NTRS1989

Time-dependent calculation of a forced mixing layer using a k-epsilon turbulence model

A two-dimensional-dependent calculation of a forced turbulent mixing layer is reported. The approach employs a k-epsilon turbulence model to represent the effects of motions which are three dimensional or out of phase with the forcing cycle. Calculations that correspond to conditions of the measurements of Weisbrot (1984) and Weisbrot and Wygnanski (1988) indicate that the main features of the mixing layer development are captured by the computation. The effect of grid refinement on the computed result indicates the importance of adequate resolution of the near field in correctly reproducing the flow evolution. The inlet boundary condition, similarly, is shown to play a decisive role in determining subsequent development.

Macinnes, J. M.↗

NASA NTRS1992

Wall functions for the kappa-epsilon turbulence model in generalized nonorthogonal curvilinear coordinates

A k-epsilon turbulence model suitable for compressible flow, including the new wall function formulation, has been incorporated into an existing compressible Reynolds-averaged Navier-Stokes code, F3D. The low Reynolds number k-epsilon model of Chien (1982) was added for comparison with the present method. A number of features were added to the F3D code including improved far-field boundary conditions and viscous terms in the streamwise direction. A series of computations of increasing complexity was run to test the effectiveness of the new formulation. Flow over a flat plate was computed by using both orthogonal and nonorthogonal grids, and the friction coefficients and velocity profiles compared with a semi-empirical equation. Flow over a body of revolution at zero angle of attack was then computed to test the method's ability to handle flow over a curved surface. Friction coefficients and velocity profiles were compared to test data. All models gave good results on a relatively fine grid, but only the wall function formulation was effective with coarser grids. Finally, in order to demonstrate the method's ability to handle complex flow fields, separated flow over a prolate spheroid at angle of attack was computed, and results were compared to test data. The results were also compared to a k-epsilon model by Kim and Patel (1991), in which one equation model patched in at the wall was employed. Both models gave reasonable solutions, but improvement is required for accurate prediction of friction coefficients in the separated regions.

Sondak, D. L.↗

NASA NTRS1993

A comparison of the predictive capabilities of several turbulence models using upwind and central-difference computer codes

Four turbulence models are described and evaluated for transonic flows using the upwind code CFL3D and the central-difference code TLNS3D. In particular, the effects of recent modifications to the half-equation model of Johnson-King are explored in detail, and different versions of the model are compared. This model can obtain good results for both two-dimensional (2D) and three-dimensional (3D) separated flows. The one-equation models of Baldwin-Barth and Spalart-Allmaras perform well for separated airfoil flows, but can predict the shock too far forward at the outboard stations of a separated wing. The equilibrium model of Baldwin-Lomax predicts the shock location too far aft for both 2D and 3D separated flows, as expected. In general, all models perform well for attached or mildly separated flows.

Rumsey, Christopher L.↗

NASA NTRS1993

Several examples where turbulence models fail in inlet flow field analysis

Computational uncertainties in turbulence modeling for three dimensional inlet flow fields include flows approaching separation, strength of secondary flow field, three dimensional flow predictions of vortex liftoff, and influence of vortex-boundary layer interactions; computational uncertainties in vortex generator modeling include representation of generator vorticity field and the relationship between generator and vorticity field. The objectives of the inlet flow field studies presented in this document are to advance the understanding, prediction, and control of intake distortion and to study the basic interactions that influence this design problem.

Anderson, Bernhard H.↗

NASA NTRS1994

A comparison of turbulence models in computing multi-element airfoil flows

Four different turbulence models are used to compute the flow over a three-element airfoil configuration. These models are the one-equation Baldwin-Barth model, the one-equation Spalart-Allmaras model, a two-equation k-omega model, and a new one-equation Durbin-Mansour model. The flow is computed using the INS2D two-dimensional incompressible Navier-Stokes solver. An overset Chimera grid approach is utilized. Grid resolution tests are presented, and manual solution-adaptation of the grid was performed. The performance of each of the models is evaluated for test cases involving different angles-of-attack, Reynolds numbers, and flap riggings. The resulting surface pressure coefficients, skin friction, velocity profiles, and lift, drag, and moment coefficients are compared with experimental data. The models produce very similar results in most cases. Excellent agreement between computational and experimental surface pressures was observed, but only moderately good agreement was seen in the velocity profile data. In general, the difference between the predictions of the different models was less than the difference between the computational and experimental data.

Rogers, Stuart E.↗

NASA NTRS1993

A Comparison of the Predictive Capabilities of Several Turbulence Models using Upwind and Central-Difference Computer Codes

Rumsey, Christopher L.↗