Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

The X-ray and optical characteristics of the cataclysmic variables V794 Aquilae

Observations of V794 Aql have revealed features that are consistent with its inclusion in the class of cataclysmic variables. The features include: (1) a 0.1-4.5 keV luminosity of 5 x 10 to the 30th ergs/sec for a d-value of 100 pc, with a hardness ratio of 11; (2) blue colors; (3) 0.5 mag variability on 40-min time scales, and 3.0 mag variability on the time scale of one day; and (4) a weak He II 4686 A, which argues against classification of V794 Aql as an AM Her-type variable. It is predicted that V794 Aql has a period shorter than six hours, with a strong possibility for eclipses, and is a strong UV emission source.

Szkody, P.↗

318-MHz variability of complete samples of extragalactic radio sources

It is found by a low-frequency variability survey, involving two- and three-epoch, 318-MHz observations of extragalactic sources in samples complete to 3 Jy at 1400 MHz and 1 Jy at 5000 MHz, that steep-spectrum sources do not seem to vary while all flat-spectrum sources exhibit low-frequency variability greater than 8% over about 5 yr. It is also found that the flat-spectrum sources with inverted spectra show the largest fractional variations, and that there is a correlation between the incidence of low-frequency variability and the determination that a source is an optically violent variable. These statistical properties are consistent with models which invoke radio and optical emission relativistic beaming.

Dennison, B.↗

Rapid X-ray variability in the Seyfert galaxy NGC 6814

In contrast with the Tennant et al (1981) sample of over 30 active galactic nuclei, HEAO 1 A-2 high time resolution X-ray observations of the X-ray emitting Seyfert 1 galaxy NGC 6814 show strong X-ray variability on time scales of less than 3 hr. On a time scale of 90 min, the mean flux varied by a factor of about 2.5, and a characteristic time for variability of 100 + 60 or - 25 sec is obtained by autocorrelation analysis. There is no indication of spectral variability with an upper limit on a change in the power law spectral index of less than about 0.37, for a factor 2 change in intensity. The constraints of such rapid variability on a range of X-ray source mechanisms is discussed.

Tennant, A. F.↗

BE Ursae Majoris /PG 1155 + 492/ - A unique cataclysmic-variable-like object

The variable spectrum of BE Ursae Majoris, which is similar to that of the cataclysmic variables (CVs), shows (1) an emission-line spectrum with the high-excitation CN 4650 A blend as the strongest optical feature, weaker H and He lines, and a strong Balmer jump, and (2) an absorption spectrum dominated by He. Although the object shows no evidence of photometric variability on either short or long time-scales, it has been shown by Kurochkin (1964, 1971) to have a 2.29-day, sinusoidal, 1.5-mag variation. The luminosity is dominated by a UV power-law component, though the 4000-10000 A continuum is flat. The hypothesis that this object is an active mass transfer binary is not supported by its photometric behavior, energy distribution and long period, despite the spectroscopic variability. Nevertheless, three components whose nature is not understood remain: (1) an ultraviolet source whose energy distribution is explainable neither by a uniform temperature primary star nor by an accretion disk; (2) a reprocessed component powered by the UV star; and (3) a component similar to a CV disk, producing the optically thick Balmer lines.

Ferguson, D. H.↗

BL Herculis stars - Theoretical models for field variables

Type II Cepheids with periods between 1 and 3 days, commonly designated as Bl Herculis stars, have been modeled here with the aim of interpreting the wide variety of light curves observed among the field variables. Previously modeled globular cluster members are used as standard calibration objects. The major finding is that only a small range of luminosities is capable of generating a large variety of light curve types at a given period. For a mass of approximately 0.60 solar mass, the models are able to reproduce the observed mean luminosities, dispersion of mean luminosities, periods, light amplitudes, light asymmetries, and phases of secondary features in the light curves of known BL Her stars. It is possible that the metal-rich variables (which are found only in the field) have luminosities lower than those of most metal-poor variables. The present revised mass for BL Her, a metal-rich object, is not significantly different from the mean mass of the metal-poor variables.

Carson, R.↗

Variable camber rotor study

Deployment of variable camber concepts on helicopter rotors was analytically assessed. It was determined that variable camber extended the operating range of helicopters provided that the correct compromise can be obtained between performance/loads gains and mechanical complexity. A number of variable camber concepts were reviewed on a two dimensional basis to determine the usefulness of leading edge, trailing edge and overall camber variation schemes. The most powerful method to vary camber was through the trailing edge flaps undergoing relatively small motions (-5 deg to +15 deg). The aerodynamic characteristics of the NASA/Ames A-1 airfoil with 35% and 50% plain trailing edge flaps were determined by means of current subcritical and transonic airfoil design methods and used by rotor performance and loads analysis codes. The most promising variable camber schedule reviewed was a configuration with a 35% plain flap deployment in an on/off mode near the tip of a blade. Preliminary results show approximately 11% reduction in power is possible at 192 knots and a rotor thrust coefficient of 0.09. The potential demonstrated indicates a significant potential for expanding the operating envelope of the helicopter. Further investigation into improving the power saving and defining the improvement in the operational envelope of the helicopter is recommended.

Dadone, L.↗

Global mesoscale variability from collinear tracks of SEASAT altimeter data

Eight to nine sets of global collinear altimeter data with a cross-track grid spacing of approximately 900 km at the equator and 600 km at midlatitude have been obtained from the last 25 days of the 1978 SEASAT mission. Since the geoid is time-invariant, such observations can reveal sea surface height variability caused by dynamic ocean phenomena. Variations due to deep ocean mesoscale features are presently solved for by eliminating the longer wavelength deviations, yielding sea height profiles with an accuracy of a few cm, and a global variability map constructed from these data which reveal an exceptionally realistic perspective of mesoscale energetics. The dominance of exceedingly small variability over extensive regions of the oceans is noted. In both the Atlantic and the Pacific, the North Equatorial Current systems were clearly expressed as zonal bands of higher variability.

Cheney, R. E.↗

Oceanic mesoscale variability and general circulation from satellite altimetry: A status report

Progress on the applications of satellite altimetry from SEASAT and Geos-3 to the study of oceanic mesoscale variability and general circulation is reviewed. The major conclusion for the applications to mesoscale variability is that an optimally designed altimetric mission with a lifetime of several years will improve our knowledge of the global mesoscale variability to an extent unattainable by any other practical means. The proposed Topex mission will allow one to view the global oceanic variability in such a wide range of periods and wavelengths: from 20 days to 3 to 5 years; from 50 to 10,000 km. However, the goal of determining the general circulation cannot be achieved by a single altimetric mission, because a highly accurate geoid needs to be determined independently. The scenario of the combination of Topex with Gravsat, a gravity mission that will give accurate geoid information, will allow the global general circulation to be determined at scales as small as 100 km. Areas of research needing to be performed with existing altimeter data are also discussed.

Fu, L. L.↗

Numerical analysis of a variable camber rotor blade as a lift control device

A new rotor configuration called the variable camber rotor was numerically investigated as a lift control device. This rotor differs from a conventional (baseline) rotor only in the blade aft section. In this configuration, the aft section or flap is attached to the forward section by pin joint arrangement, and also connected to the rotor control system for the control of rotor thrust level and vectoring. Pilot action to the flap deflection controls rotor lift and tip path plane tilt. The drag due to flaps is presented and the theoretical result correlated with test data. The assessment of payoff for the variable camber rotor in comparison with conventional (baseline) rotor was examined in hover. The variable camber rotor is shown to increase hover power required by 1.35%, but such a minimal power penalty is not significant enough to be considered a negative result. In forward flight, the control needs of the variable camber rotor were evaluated.

Awani, A. O.↗

Slotted variable camber flap

Variable camber actuator assemblies broaden the range of speeds at which lift to drag performance is maximized for slotted flap wings. Lift is improved over a broader range of cruising speeds by varying wing camber with rotational flap movements that do not introduce wing slots and induced drag. Forward flaps are secured to forward flange links which extended from, and are a part of forward flap linkage assemblies. The forward flaps rotate about flap pivots with their rotational displacement controlled by variable camber actuator assemblies located between the forward flaps and the forward flange links. Rear flaps are held relative to the forward flaps by rear flap linkage assemblies which may act independently from the forward flap linkage assemblies and the variable camber actuator assemblies. Wing camber is varied by rotating the flaps with the variable camber actuator assemblies while the flaps are in a deployed or tucked position. Rotating the flaps in a tucked position does not introduce significant wing surface discontinuities, and reduces aircraft fuel consumption on most flight profiles.

Andrews, D. G.↗

The photometric variability of solar-type stars. III - Results from 1981-82, including parallel observations of thirty-six Hyades stars

A photometric survey of main-sequence stars in the Pleiades, Hyades, and Malmquist Field, to investigate variability among solar-type stars, had been continued at Cloudcroft Observatory for a second season. Possibly six of 40 Pleiades stars, two (possibly six) of 49 Hyades stars and possibly four of 42 stars in the Malmquist Field are found to be variable. Parallel observations of Hyades stars were obtained also at Lowell Observatory. These measurements, which achieved better precision, reveal significiant variations in eleven (possibly 16) of 36 Hyades stars, all of spectral type F7 V-K2 V. Agreement between the two surveys is acceptable. The two seasons of the Cloudcroft survey show that changes in the mean annual brightness of the Hyades stars accompany changes in the amplitude of their short-term variability, in the sense that a star tends to become fainter as its variability increases and vice versa. Color effects are absent.

Radick, R. R.↗

Initial testing of a variable-stroke Stirling engine

In support of the U.S. Department of Energy's Stirling Engine Highway Vehicle Systems Program, NASA Lewis Research Center is evaluating variable-stroke control for Stirling engines. The engine being tested is the Advenco Stirling engine; this engine was manufactured by Philips Research Laboratories of the Netherlands and uses a variable-angle swash-plate drive to achieve variable stroke operation. The engine is described, initial steady-state test data taken at Lewis are presented, a major drive system failure and subsequent modifications are described. Computer simulation results are presented to show potential part-load efficiency gains with variable-stroke control.

Thieme, L. G.↗

On the use of internal state variables in thermoviscoplastic constitutive equations

The general theory of internal state variables are reviewed to apply it to inelastic metals in use in high temperature environments. In this process, certain constraints and clarifications will be made regarding internal state variables. It is shown that the Helmholtz free energy can be utilized to construct constitutive equations which are appropriate for metallic superalloys. Internal state variables are shown to represent locally averaged measures of dislocation arrangement, dislocation density, and intergranular fracture. The internal state variable model is demonstrated to be a suitable framework for comparison of several currently proposed models for metals and can therefore be used to exhibit history dependence, nonlinearity, and rate as well as temperature sensitivity.

Allen, D. H.↗

Experimental investigation of a variable speed constant frequency electric generating system from a utility perspective

As efforts are accelerated to improve the overall capability and performance of wind electric systems, increased attention to variable speed configurations has developed. A number of potentially viable configurations have emerged. Various attributes of variable speed systems need to be carefully tested to evaluate their performance from the utility points of view. With this purpose, the NASA experimental variable speed constant frequency (VSCF) system has been tested. In order to determine the usefulness of these systems in utility applications, tests are required to resolve issues fundamental to electric utility systems. Legitimate questions exist regarding how variable speed generators will influence the performance of electric utility systems; therefore, tests from a utility perspective, have been performed on the VSCF system and an induction generator at an operating power level of 30 kW on a system rated at 200 kVA and 0.8 power factor.

Herrera, J. I.↗

Search for scattered X-ray halos around variable sources - The X-ray halo of Cygnus X-1

The results of a program to search for the presence of halos due to X-ray scattering by interstellar grains in the line-of-sight to variable X-ray sources are reported. As part of this program, four Einstein HRI images of Cyg X-1 were examined. The analysis technique exploits the intrinsic aperiodic variability of this source to map the point response function of the optics. Any scattered halo present will not reflect short-term central source time variability, since such variability is smoothed by differential time delays of order days. Thus, a residual, nonvariable component to the surface brightness distribution (comprising about 12 percent or more of the source flux) is interpreted as a scattered halo. The Cyg X-1 halo is consistent with those of other sources found in previous studies using different techniques. Comparison is also made with a scattering model and, despite uncertainties in source spectrum and distance, reasonable agreement with the observatons is found using a standard interstellar grain model. The potential of X-ray scattering as a probe of the properties of interstellar grains is demonstrated.

Bode, M. F.↗

Short-term spectral variability in AB Aurigae - Clues for activity in Herbig Ae stars. I - The ultraviolet lines of Mg II and Fe II

IUE satellite monitoring of the Herbig Ae star AB Aur in 1982 and 1984, with attention to the variability of both the Mg II 2795 A wind profile and a number of Fe II UV lines, has indicated temporal variations in the Mg II blue wing velocity by 30-50 percent at both epochs. By contrast, the Fe II spectrum was constant in 1982, but variable in 1984. There is no evidence of photometric variability in AB Aur during either period. An analysis of the Mg II blue wing velocity vs time shows that the variability can be fitted with a sine curve of period 45 + or - 6 yr, which is interpreted to be the stellar rotation period. The observed rotational modulation of the blue wing velocity of Mg II 2795 A in AB Aur's wind is the first direct evidence of a nonaxisymmetric wind in an A-type premain sequence object.

Praderie, F.↗

Determining the influence and effects of manufacturing variables on sulfur dioxide cells

A survey of the Li/SO2 manufacturing community was conducted to determine where variability exists in processing. The upper and lower limits of these processing variables might, by themselves or by interacting with other variables, influence safety, performance, and reliability. A number of important variables were identified and a comprehensive design experiment is being proposed to make the proper determinations.

Zajac, W. V.↗

Testing of a variable-stroke Stirling engine

Testing of a variable-stroke Stirling engine at NASA Lewis has been completed. In support of the DOE Stirling Engine Highway Vehicle Systems Program, the engine was tested for about 70 hours total with both He and H2 working fluids over a range of pressures and strokes. A direct comparison was made of part-load efficiencies obtained with variable-stroke (VS) and variable-pressure operation. Two failures with the variable-angle swash-plate drive system limited testing to low power levels. These failures are not thought to be caused by problems inherent with the VS concept but do emphasize the need for careful design in the area of the crossheads.

Thieme, L. G.↗