Search NASA⌕ Search

SEARCH · Search NASA

Results for “visualization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

JOVE: Program Accomplishments and Research Continuation Plans

We designed and constructed a centrifuge for high gravity materials science research. One Master's theses project on the directional solidification of Pb-Sn alloys demonstrated effects of high gravity on the fluid flow at the solid-liquid interface during processing. These results were published. Another investigation applied flow visualization techniques to image flow patterns in a water cell. This activity supported our research proposal for aqueous growth of L-Anginin Phosphate Single Crystals in a high gravity environment. This proposal was well reviewed but ultimately denied funding.

Hmelo, Anthony B.↗
NASA NTRS1996

Helicopter Rotor Blade Computation in Unsteady Flows Using Moving Overset Grids

An overset grid thin-layer Navier-Stokes code has been extended to include dynamic motion of helicopter rotor blades through relative grid motion. The unsteady flowfield and airloads on an AH-IG rotor in forward flight were computed to verify the methodology and to demonstrate the method's potential usefulness towards comprehensive helicopter codes. In addition, the method uses the blade's first harmonics measured in the flight test to prescribe the blade motion. The solution was impulsively started and became periodic in less than three rotor revolutions. Detailed unsteady numerical flow visualization techniques were applied to the entire unsteady data set of five rotor revolutions and exhibited flowfield features such as blade vortex interaction and wake roll-up. The unsteady blade loads and surface pressures compare well against those from flight measurements. Details of the method, a discussion of the resulting predicted flowfield, and requirements for future work are presented. Overall, given the proper blade dynamics, this method can compute the unsteady flowfield of a general helicopter rotor in forward flight.

Ahmad, Jasim↗
NASA NTRS1959

Effect of Cascade Parameters on Rotating Stall

Analysis of the vortex model proposed by Kriebel, Seidel, and Schwind shows this representation of rotating stall satisfies, at least approximately, the requirements at the cascade. Cascade-parameter-variation effects on rotating stall were studied in a circular cascade and single-stage compressor. Modification of the single-stage compressor stopped the rotating-stall pattern and permitted observation of the pressure and velocity distribution around the annulus. Closer observation might be possible with proper flow-visualization techniques, such as a water pump.

Stenning, A. H.↗
NASA NTRS1999

Parallel Visualization Co-Processing of Overnight CFD Propulsion Applications

An interactive visualization system pV3 is being developed for the investigation of advanced computational methodologies employing visualization and parallel processing for the extraction of information contained in large-scale transient engineering simulations. Visual techniques for extracting information from the data in terms of cutting planes, iso-surfaces, particle tracing and vector fields are included in this system. This paper discusses improvements to the pV3 system developed under NASA's Affordable High Performance Computing project.

Edwards, David E.↗
NASA NTRS1999

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team 1998

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available under the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching and vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Hesselink, Lambertus↗
NASA NTRS1999

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available un- der the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching an@ vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Hesselink, Lambertus↗
NASA NTRS1999

Experimental and Computational Investigation of a Translating-Throat Single-Expansion-Ramp Nozzle

An experimental and computational study was conducted on a high-speed, single-expansion-ramp nozzle (SERN) concept designed for efficient off-design performance. The translating-throat SERN concept adjusts the axial location of the throat to provide a variable expansion ratio and allow a more optimum jet exhaust expansion at various flight conditions in an effort to maximize nozzle performance. Three design points (throat locations) were investigated to simulate the operation of this concept at subsonic-transonic, low supersonic, and high supersonic flight conditions. The experimental study was conducted in the jet exit test facility at the Langley Research Center. Internal nozzle performance was obtained at nozzle pressure ratios (NPR's) up to 13 for six nozzles with design nozzle pressure ratios near 9, 42, and 102. Two expansion-ramp surfaces, one concave and one convex, were tested for each design point. Paint-oil flow and focusing schlieren flow visualization techniques were utilized to acquire additional flow data at selected NPR'S. The Navier-Stokes code, PAB3D, was used with a two-equation k-e turbulence model for the computational study. Nozzle performance characteristics were predicted at nozzle pressure ratios of 5, 9, and 13 for the concave ramp, low Mach number nozzle and at 10, 13, and 102 for the concave ramp, high Mach number nozzle.

Deere, Karen A.↗
NASA NTRS1997

Rapid Decimation for Direct Volume Rendering

An approach for eliminating unnecessary portions of a volume when producing a direct volume rendering is described. This reduction in volume size sacrifices some image quality in the interest of rendering speed. Since volume visualization is often used as an exploratory visualization technique, it is important to reduce rendering times, so the user can effectively explore the volume. The methods presented can speed up rendering by factors of 2 to 3 with minor image degradation. A family of decimation algorithms to reduce the number of primitives in the volume without altering the volume's grid in any way is introduced. This allows the decimation to be computed rapidly, making it easier to change decimation levels on the fly. Further, because very little extra space is required, this method is suitable for the very large volumes that are becoming common. The method is also grid-independent, so it is suitable for multiple overlapping curvilinear and unstructured, as well as regular, grids. The decimation process can proceed automatically, or can be guided by the user so that important regions of the volume are decimated less than unimportant regions. A formal error measure is described based on a three-dimensional analog of the Radon transform. Decimation methods are evaluated based on this metric and on direct comparison with reference images.

Gibbs, Jonathan↗
NASA NTRS2000

Landstat 7 Views the World

The technical innovations of precise numerical radiometry, spectral differentiation and seasonally repetitive monitoring, introduced by the Landsat series of satellites, created a new measurement approach for terrestrial monitoring. The Landsat 7 mission, successfully initiated on April 15, 1999, reflects significant progress in realizing the scientific potential of this measurement strategy. Substantial improvements in calibration procedures, both prior to launch and during normal operations, have been accomplished to insure long-term stability in the acquired spectral radiometry. For the first time, Landsat 7 will be operated with a long-term data acquisition plan that will insure, barring national emergencies, that substantially cloud-free, seasonal coverage will be recorded and archived in the US for all land areas of the globe. The expected outcome of these efforts is a rapid improvement in our understanding of the Earth system, as well as conceptual knowledge that will underpin commercial application of this technology. The Cape Town 2000 Symposium will take place approximately nine months after the Landsat 7 satellite and instrument completed its engineering checkout phase and was placed in its final orbit in late June, 1999. Thus, this presentation will provide a timely status report, in a significant international setting, regarding the early on-orbit performance of the Landsat 7 spacecraft, the ETM+ instrument, and the long-term data acquisition strategy that has been implemented. The latest data display and visualization techniques will be utilized to present this significant new source of Earth observation data.

Williams, Darrel L.↗
NASA NTRS1999

Large Field Visualization with Demand-Driven Calculation

We present a system designed for the interactive definition and visualization of fields derived from large data sets: the Demand-Driven Visualizer (DDV). The system allows the user to write arbitrary expressions to define new fields, and then apply a variety of visualization techniques to the result. Expressions can include differential operators and numerous other built-in functions, ail of which are evaluated at specific field locations completely on demand. The payoff of following a demand-driven design philosophy throughout becomes particularly evident when working with large time-series data, where the costs of eager evaluation alternatives can be prohibitive.

Moran, Patrick J.↗
NASA NTRS2000

The 3-Dimensional Inner and Outer Structure of Ejecta Around Eta Carinae as Detected by the STIS

The HST/STIS instrument was used successfully to perform a complete mapping of the Homunculus nebula at two wavelength ranges including H-alpha and H-beta with a spectral resolving power of about 5000 and a spatial resolution of 0.1". The individual spectra were merged to synthesize three-dimensional data cubes that contain a set of images of Eta Car with spatial resolution of 0.10 to 0.251, sliced at velocity increment of 10 -- 30 km/s. For the first time this unique method allows us to diagnose the origin of intrinsic narrow emission structure of the nebula with high spatial and velocity resolution. Our initial analysis revealed the inner emission structure appeared to trace an elongated bipolar shell (possibly other shells as well) with a scale size of an arcsecond (i.e., "little homunculus in the Homunculus"). Furthermore, the mapping data cube revealed that the "fan" or "paddle" -- often referred as the source of peculiar blue-shifted intrinsic emissions including the Strontium cloud -- is not the source of intrinsic emissions. The fan is not even a part of the equatorial disk, but is spatially separated from the peculiar emission structure. Indeed we suggest that the fan is a surface of the Northwest lobe, possibly revealed by a blowout of the equatorial disk. We will use a number of visualization techniques (tomographic animations and simple 3-D models) to show these structures. These new results have strong impact upon future numerical modelings of the Homunculus nebula and of understanding of the evolution of the ejecta powered by the central source(s).

Ishibashi, Kazunori↗
NASA NTRS1994

Description of the NASA Dryden Flow Visualization Facility

A water tunnel facility at the NASA Dryden Flight Research Facility is described. This water tunnel facility, the Flow Visualization Facility, is used primarily for visualizing and analyzing vortical flows on aircraft models and other shapes at high incidence angles. The tunnel is used extensively as a low cost diagnostic tool to help understand complex flows over aircraft and other full scale vehicles. The facility consists primarily of a closed circuit water tunnel with a 16 in by 24 in vertical test section. The velocity of the flow through the test section can be varied from 0 to 10 in/sec, however 3 in/sec has been found to be optimum for flow visualization. This corresponds to a unit Reynolds number of 23,000 per foot and a turbulence level over the majority of the test section below .05%. Flow visualization techniques described include the dye tracer, laser light sheet and the shadowgraph techniques. Limited correlation to full-scale flight data is shown.

DelFrate, John H.↗
NASA NTRS2000

Modeling and Observations of Phase-Mask Trapezoidal Profiles with Grating-Fiber Image Reproduction

We report on an investigation of the trapezoidal design and fabrication defects in phase masks used to produce Bragg reflection gratings in optical fibers. We used a direct visualization technique to examine the nonuniformity of the interference patterns generated by several phase masks. Fringe patterns from the phase masks are compared with the analogous patterns resulting from two-beam interference. Atomic force microscope imaging of the actual phase gratings that give rise to anomalous fringe patterns is used to determine input parameters for a general theoretical model. Phase masks with pitches of 0.566 and 1.059 microns are modeled and investigated.

Lyons, Donald R.↗
NASA NTRS2000

Skin Friction and Transition Location Measurement on Supersonic Transport Models

Flow visualization techniques were used to obtain both qualitative and quantitative skin friction and transition location data in wind tunnel tests performed on two supersonic transport models at Mach 2.40. Oil-film interferometry was useful for verifying boundary layer transition, but careful monitoring of model surface temperatures and systematic examination of the effects of tunnel start-up and shutdown transients will be required to achieve high levels of accuracy for skin friction measurements. A more common technique, use of a subliming solid to reveal transition location, was employed to correct drag measurements to a standard condition of all-turbulent flow on the wing. These corrected data were then analyzed to determine the additional correction required to account for the effect of the boundary layer trip devices.

Kennelly, Robert A., Jr.↗
NASA NTRS2001

Discovering Communicable Scientific Knowledge from Spatio-Temporal Data

This paper describes how we used regression rules to improve upon a result previously published in the Earth science literature. In such a scientific application of machine learning, it is crucially important for the learned models to be understandable and communicable. We recount how we selected a learning algorithm to maximize communicability, and then describe two visualization techniques that we developed to aid in understanding the model by exploiting the spatial nature of the data. We also report how evaluating the learned models across time let us discover an error in the data.

Schwabacher, Mark↗
NASA NTRS1997

New Challenges in Visualization of Computational Fluid Dynamics

The development of visualization systems for analyzing computational fluid dynamics data has been driven by increasing size and complexity of the data. New extensions to the system domain into analysis of data from multiple sources, parameter space studies, and multidisciplinary studies in support of integrated aeronautical design systems provide new g challenges for the visualization system developer. Recent work at NASA Ames Research Center in visualization systems, automatic flow feature detection, unsteady flow visualization techniques, and a new area, data exploitation, will be discussed in the context of NASA information technology initiatives.

Gerald-Yamasaki, Michael↗
NASA NTRS2002

REACH: Real-Time Data Awareness in Multi-Spacecraft Missions

NASA's Advanced Architectures and Automation Branch at the Goddard Space Flight Center (Code 588) saw the potential to reduce the cost of constellation missions by creating new user interfaces to the ground system health-and-safety data. The goal is to enable a small Flight Operations Team (FOT) to remain aware and responsive to the increased amount of ground system information in a multi-spacecraft environment. Rather than abandon the tried and true, these interfaces were developed to run alongside existing ground system software to provide additional support to the FOT. These new user interfaces have been combined in a tool called REACH. REACH-the Real-time Evaluation and Analysis of Consolidated Health-is a software product that uses advanced visualization techniques to make spacecraft anomalies easy to spot, no matter how many spacecraft are in the constellation. REACH reads numerous real-time streams of data from the ground system(s) and displays synthesized information to the FOT such that anomalies are easy to pick out and investigate.

Maks, Lori↗