Search NASA⌕ Search

SEARCH · Search NASA

Results for “widths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Simulation and measurement of the dynamic strain response in a prototypical spallation target

The Second Target Station (STS) at the Spallation Neutron Source (SNS) will address emerging scientific challenges by providing a source of intense cold neutrons to instruments optimized for this source. The STS target will use rotating tungsten blocks and will receive 1.3 GeV proton beam pulses from the SNS accelerator at a repetition rate of 15 Hz. The facility life is planned for 40 years, and each target assembly life is expected to be approximately 10 years. An accurate strain prediction is then critical for fatigue life assessment of STS target blocks because they will be subject to approximately 10 8 beam pulses per lifetime. As an R&D activity, the Los Alamos Neutron Science Center (LANSCE) Weapons Neutron Research (WNR) Target 2 (Blue Room) facility was used to test the strain response of prototypical target blocks to the thermal shock of a proton pulse. The blue room was well suited for a pulsed proton beam impact test of subscale STS target blocks; the 800 MeV proton energy is approximately 60 % of the 1.3 GeV proton energy expected from the SNS accelerator to the STS. The LANSCE Proton Storage Ring (PSR) and SNS are both short-pulse proton beam sources with nominal pulse widths of 250 ns and 661 ns, respectively, so the energy deposition in the target occurs in <1 μs pulse duration. Strain measurements on the outer surface of three target blocks (bare tungsten, tantalum-clad tungsten, niobium-clad tungsten) were recorded for comparison against neutronics and structural simulations. In conclusion, this experiment and the supporting simulations satisfied the following primary research goals for the STS target.

Dynamic strain response↗
DOE OSTI2026

A novel, steerable, low-energy proton source for detector characterization

We report on the conversion of the Manitoba II mass spectrometer into a versatile low-energy proton beam facility. This infrastructure is adaptable to any detector-under-test (DUT), and has proven itself effective with the characterization of silicon detectors used in subatomic beyond-the-Standard-Model (BSM) searches, namely the Nab experiment. A pencil beam of mono-energetic protons can be produced in a range from 25 keV to 35 keV, achieving a beam current of ~1 x 10 -18 A. Electrostatic steering plates were constructed to direct the Gaussian-profile proton beam over a 117 mm diameter area-of-interest with full-width at half-maxima (FWHM) ranging from 0.6 mm to 1.26 mm. This work discusses the modifications and subsequent tests to confirm the beam specifications met the demands of the aforementioned detectors.

Fundamental neutron physics↗
DOE OSTI2026

Impact of light output on the timing resolution of organic glass scintillator bars in a dual-ended readout configuration

The effectiveness of detector system modeling and validation depends on the quality of characterization performed on the system. For nuclear nonproliferation applications, which require detectors to address complex and variable field conditions, access to accurate system models is essential. This study presents the timing characterization of organic glass scintillator bars used in an imaging system developed at the University of Michigan. 137 Cs and 60 Co gamma-ray sources were used to determine the coincidence time resolution as a function of measured light output for two Compton scatter events between two organic glass scintillator bars. Timing resolution for two events, each with light output ranging from 100 to 1100 keVee were characterized. The resulting data were fit to a parametric function that was validated to agree with experimental results within ±25 ps. Simulations were performed to establish appropriate calibration points for each organic scintillator, thereby ensuring accurate calibration of light output values during analysis. This work successfully characterized the light output dependence of the coincidence timing resolution of a pair of organic glass detectors for use in an imaging system. Depending on the amount of scintillation light output from the events, the full width at half maximum of the measured coincidence time resolution ranged from 653.2 ± 16.1 ps for low light yields, 100 keVee, to 121.0 ± 8.4 ps for higher yields at 1100 keVee. The insights obtained from the timing resolution behavior will allow for accurate simulation capabilities in future security and verification efforts using scatter-based imaging systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Quantifying uncertainties in α -nucleus reaction dynamics informed from first principles

The ab initio symmetry-adapted no-core shell model is a microscopic many-body method which naturally describes challenging collective and clustering features of atomic nuclei. Wave functions and observables computed with realistic nucleon-nucleon forces in this framework are tied to first principles, and are hence well-suited for rigorous uncertainty quantification. We discuss α-deuteron and α- 12 C cluster potentials informed by symmetry-adapted calculations, and propagate uncertainties in the effective binary cluster method as well as those in the nuclear interaction to reaction observables, namely scattering phase shifts, cross sections, partial widths and resonance energies. Here, we find that the overall uncertainties are dominated by those originating in the underlying nuclear force, speaking to the need for tighter constraints on realistic nucleon-nucleon interactions.

Ab initio↗
DOE OSTI2026

To bin or not to bin: Does binning in multiplicity reliably suppress unwanted volume fluctuations?

Here, in this study, we examine the effect of the so-called Centrality Bin Width Correction (CBWC) on the measurement of (net-)proton number cumulants in nucleus-nucleus collisions. We present an analytically tractable model, which includes correlations between multiplicity and proton number similar to those generated by the decay of baryon resonances. Within this model, we analyze the circumstances under which the CBWC method correctly removes the undesired effects of volume or impact parameter fluctuations. Additionally, we explore situations where the method fails and produces misleading results.

Critical point↗
DOE OSTI2026

Experiments and simulations on the Richtmyer-Meshkov instability with a thin intermediate layer

Experiments and simulations of the Richtmyer-Meshkov instability (RMI) in two- and three-layer configurations are presented. The two-layer case utilizes a light-over-heavy configuration and consists of air as the light gas and sulfur hexafluoride (SF 6 ) as the heavy gas. The three-layer case utilizes a light-intermediate-heavy configuration, with helium (He) as the light gas, air as the intermediate gas, and SF 6 as the heavy gas. Statistically significant differences in the mixing layer width of the lower interface are not observed between the two cases. This differs from the experiments of Schalles et al., where a small, though statistically significant, difference in mixing layer growth was observed between the two- and three-layer cases with a nominally two-dimensional, single mode perturbation. Notably, the perturbations on the lower interface in the present work do not grow large enough to significantly interact with the upper interface during the duration of the experiments. In conclusion, this suggests that the differences in mixing layer growth observed by Schalles et al. may be due to interactions of the perturbations on one interface with the other interface rather than being inherent to the three-layer problem.

42 ENGINEERING↗
DOE OSTI2024

Investigating the composition of the $K$$^{*}_{0}$(700) state with π ± $K$$^{0}_{S}$ correlations at the LHC

The first measurements of femtoscopic correlations with the particle pair combinations π ± $K$$^{0}_{S}$ in pp collisions at $\sqrt{s}$ = 13 TeV at the Large Hadron Collider (LHC) are reported by the ALICE experiment. Using the femtoscopic approach, it is shown that it is possible to study the elusive $K$$^{*}_{0}$(700) particle that has been considered a tetraquark candidate for over forty years. Source and final-state interaction parameters are extracted by fitting a model assuming a Gaussian source to the experimentally measured two-particle correlation functions. The final-state interaction in the π ± $K$$^{0}_{S}$ system is modeled through a resonant scattering amplitude, defined in terms of a mass and a coupling parameter, The extracted mass and Breit–Wigner width, derived from the coupling parameter, of the final-state interaction are found to be consistent with previous measurements of the $K$$^{*}_{0}$ (700). The small value and increase of the correlation strength with increasing source size support the hypothesis that the $K$$^{*}_{0}$(700) is a four-quark state, i.e. a tetraquark state of the form (q 1 , $\bar{q}$ 2 , q 3 , $\bar{q}$ 3 ) in which q 1 , q 2 and q 3 indicate the flavor of the valence quarks of the π and $K$$^{0}_{S}$. This latter trend is also confirmed via a simple geometric model that assumes a tetraquark structure of the $K$$^{*}_{0}$(700) resonance.

13 TeV pp collisions↗
DOE OSTI2024

Search for pair production of boosted Higgs bosons via vector-boson fusion in the $b$$\overline{b}$$b$$\overline{b}$ final state using $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, K 2V . This study constrains K 2V to 0.55 < K 2V < 1.49 at the 95% confidence level. The value K 2V = 0 is excluded with a significance of 3.8 standard deviations with other Higgs boson couplings fixed to their Standard Model values. A search for new heavy spin-0 resonances that would mediate Higgs boson pair production via vector-boson fusion is carried out in the mass range of 1–5 TeV for the first time under several model and decay-width assumptions. No significant deviation from the Standard Model hypothesis is observed and exclusion limits at the 95% confidence level are derived.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Melting down a tetraquark: D*D(*) interactions and T c c ( 3875 ) + in a hot environment

We discuss the modification of the properties of the tetraquark-like and its heavy quark spin partner, immersed in a hot bath of pions. We consider these exotic states as purely isoscalar DD* and D*D* S-wave bound states, respectively. Finite temperature effects are incorporated through the D and D* state-of-the-art thermal spectral functions calculated in [G. Montana et al., Phys. Rev. D, 102 (2020) 096020], using the imaginary-time formalism. We find important modifications of the DD* and D*D* scattering amplitudes already for MeV, and show that the hot-bath lineshapes of these tetraquark-like states strongly depend on their Weinberg molecular content. We find that the thermal and spectral functions change more rapidly with temperature for high molecular probabilities P0. For large values of P0, the widths significantly increase with temperature, leading to the melting of these exotic states for temperatures larger than 80 MeV. For small molecular components, the changes in the spectral functions of these states due to temperature become significantly less important. All these results show that any future experimental determination of the D(*)D* scattering amplitudes at finite temperature will provide valuable insights into the molecular content of the and exotics.

Montesinos, V. (ORCID:0000000261862777)↗
DOE OSTI2026

Study of the interaction between $Ξ$ baryons and light mesons via femtoscopy at the LHC

Meson-baryon systems with strangeness content provide a unique laboratory for investigating the strong interaction and testing theoretical models of hadron structure and dynamics. In this work, the measured correlation functions for oppositely charged $Ξ$-K and $Ξ$ − 𝜋 pairs obtained in high-multiplicity pp collisions at $\sqrt{𝑠}$ = 13 TeV at the LHC are presented. For the first time, high-precision data on the $Ξ$-K interaction are delivered at small relative momenta. The scattering lengths, extracted via the Lednický–Lyuboshits expression of the pair wavefunction, indicate a repulsive and a shallow attractive strong interaction for the $Ξ$-K and $Ξ$ − 𝜋 systems, respectively. The $Ξ$(1620) and $Ξ$(1690) states are observed in the $Ξ$ − 𝜋 correlation function and their properties, mass and width, are determined. These measurements are in agreement with other available results. Such high-precision data can help refine the understanding of these resonant states, provide stronger constraints for chirally motivated potentials, and address the key challenge of describing the coupled-channel dynamics that may give rise to molecular configurations .

Femtoscopy↗
DOE OSTI2026

Search for a new heavy resonance decaying to a top quark and a neutral scalar boson in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A first search at the LHC for a new heavy resonance decaying to a top quark and a neutral scalar boson ϕ in the fully hadronic final state is presented, where the ϕ boson is identified by its decay into a bottom quark-antiquark pair. The search is focused on final states in which the decay products of the highly Lorentz boosted top quark and ϕ boson are each reconstructed as a single, large-radius jet with distinct substructure. The analysis is performed using proton-proton collision data at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb −1 , recorded with the CMS detector at the LHC in 2016–2018. The single production of a vector-like top quark, T′, is used as a benchmark model for the signal process. The results of this search are combined with those of a previous CMS search in which semileptonic decays of the top quark were used. No significant excess of data is observed with respect to the background prediction. For the case where the neutral scalar is a standard model Higgs boson and the T′ quark width is 5% of its mass, T′ quark masses between 0.85 and 1.3 TeV are excluded at 95% confidence level and the most stringent limits to date are set for masses above 2 TeV . For other ϕ boson masses, upper limits as low as 0.1 fb are set on the product of the T′ quark production cross section and branching fraction for its decay to a top quark and a ϕ boson.

Boosted↗
DOE OSTI2024

Searches for Higgs boson production through decays of heavy resonances

The discovery of the Higgs boson has led to new possible signatures for heavy resonance searches at the LHC. Since then, search channels including at least one Higgs boson plus another particle have formed an important part of the program of new physics searches. In this report, the status of these searches by the CMS Collaboration is reviewed. Searches are discussed for resonances decaying to two Higgs bosons, a Higgs and a vector boson, or a Higgs boson and another new resonance. All analyses use proton–proton collision data collected at $\sqrt{s} = 13$ TeV in the years 2016–2018. A combination of the results of these searches is presented together with constraints on different beyond-the-standard model scenarios, including scenarios with extended Higgs sectors, heavy vector bosons and extra dimensions. Studies are shown for the first time by CMS on the validity of the narrow-width approximation in searches for the resonant production of a pair of Higgs bosons. The potential for a discovery at the High Luminosity LHC is also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Processing-dependent chemical ordering in Cu 3 Au characterized via non-destructive Bragg coherent diffraction imaging

Of current importance for alloy design is controlling chemical ordering through processing routes to optimize an alloy's mechanical properties for a desired application. However, characterization of chemical ordering remains an ongoing challenge, particularly when nondestructive characterization is needed. Here, in this study, Bragg coherent diffraction imaging is used to reconstruct morphology and lattice displacement in model Cu 3 Au nanocrystals that have undergone different heat treatments to produce variation in chemical ordering. The magnitudes and distributions of the scattering amplitudes (proportional to electron density) and lattice strains within these crystals are then analyzed to correlate them to the expected amount of chemical ordering present. Nanocrystals with increased amounts of ordering are found to generally have less extreme strains present and reduced strain distribution widths. In addition, statistical correlations are found between the spatial arrangement of scattering amplitude and lattice strains.

Warren, Nathaniel [Pennsylvania State Univ., Unive↗
DOE OSTI2024

Effect of feed-rod tilting on friction surfacing of steel

During the friction surfacing process, the forge-axial force, rotation rate, and traverse speed of the consumable feed-rod play crucial roles in determining the deposition rate and layer morphology. Although some researchers have studied the enhancement of deposition by introducing a backward tilt relative to the traverse direction, there has been limited investigation into the effects of other tilt orientations. Therefore, this study aims to provide a more comprehensive understanding of feed-rod tilting in friction surfacing. In this investigation, the consumable feed-rod undergoes tilting in four distinct directions: forward, backward, advancing side, and retreating side, each tested at two different tilt angles (1.5° and 3.0°). The results reveal that the feed-rod tilting can influence the deposition dynamics by altering the location and area of the rubbing interface situated between the feed-rod and the substrate. Moreover, the feed-rod tilting can significantly enhance the bond width, deposition rate, and deposition efficiency. The enhancement in deposition efficiency signifies a successful reduction in flash formation. Furthermore, a distinct layered microstructure is evident within each deposition layer, regardless of tilt conditions, indicating the unique deposition process inherent to friction surfacing. Finally, the innovative approach proposed in this study not only offers a straightforward and feasible means to improve deposition rate and efficiency but also expands the potential for constructing more intricate geometries or authentic surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Estimation of cutting tool wear using an elastomeric tactile sensor

Machining performance of cutting tools and part quality are affected by the geometric condition of the cutting edge, which is influenced by thermomechanical loads experienced during the process. Tool condition monitoring (TCM) systems provide insight for timely replacement of cutting tools. However, existing TCM systems are expensive and require specialized equipment or sensors, hindering widespread adoption. A novel TCM system is developed herein using an elastomeric tactile sensor. Sensor images of the cutting edge are used to quantify wear using two distinct algorithms. In the first algorithm, the unworn and worn edges are identified based on Canny edge detect. In the second, the unworn edge is identified using edge detection while the region of wear is identified using a relative intensity method. In both cases, the maximum wear width is calculated based on an experimentally determined pixel to-physical distance scale. The TCM system is first used to estimate flank wear on a solid carbide helical end mill before evaluating its robustness by employing it to estimate insert wear of an indexable helical end mill. Measurements are also performed manually using an optical microscope and a high-resolution focus variation microscope for verification. The novel technique estimates flank wear in the solid carbide tool with a high accuracy of 98%. Larger discrepancies are observed for the inserts, however, with overlapping uncertainties. In conclusion, the technique shows promise in adaptability, automation, and closed loop control of machine tools.

Machining↗
DOE OSTI2024

Magneto-Stokes flow in a shallow free-surface annulus

In this study, we analyse ‘magneto-Stokes’ flow, a fundamental magnetohydrodynamic (MHD) flow that shares the cylindrical-annular geometry of the Taylor–Couette cell but uses applied electromagnetic forces to circulate a free-surface layer of electrolyte at low Reynolds numbers. The first complete, analytical solution for time-dependent magneto-Stokes flow is presented and validated with coupled laboratory and numerical experiments. Three regimes are distinguished (shallow-layer, transitional and deep-layer flow regimes), and their influence on the efficiency of microscale mixing is clarified. The solution in the shallow-layer limit belongs to a newly identified class of MHD potential flows, and thus induces mixing without the aid of axial vorticity. We show that these shallow-layer magneto-Stokes flows can still augment mixing in distinct Taylor dispersion and advection-dominated mixing regimes. The existence of enhanced mixing across all three distinguished flow regimes is predicted by asymptotic scaling laws and supported by three-dimensional numerical simulations. Mixing enhancement is initiated with the least electromagnetic forcing in channels with order-unity depth-to-gap-width ratios. If the strength of the electromagnetic forcing is not a constraint, then shallow-layer flows can still yield the shortest mixing times in the advection-dominated limit. Our robust description of momentum evolution and mixing of passive tracers makes the annular magneto-Stokes system fit for use as an MHD reference flow.

58 GEOSCIENCES↗
DOE OSTI2024

The influence of the shock-to-reshock time on the Richtmyer–Meshkov instability in reshock

Experiments on the Richtmyer–Meshkov instability (RMI) in a dual driver vertical shock tube (DDVST) are described. An initially planar, stably stratified membraneless interface is formed by flowing air from above and sulfur hexafluoride from below the interface location using the method of Jones & Jacobs ( Phys. Fluids , vol. 9, issue 1997, 1997, pp. 3078–3085). A random three-dimensional, multi-modal initial perturbation is imposed by vertically oscillating the gas column to produce Faraday waves. The DDVST design generates two shock waves, one originating above and one below the interface, with these shocks having independently controllable strengths and interface arrival times. The shock waves have nominal strengths of $M_L=1.17$ and $M_H=1.18$ for the shock wave originating in the light and heavy gas, respectively, with these strengths chosen to result in arrested bulk interface motion following reshock. The influence of the length of the shock-to-reshock time, as well as the order of shock arrival, on the post-reshock RMI is examined. The mixing layer width grows according to $h\propto t^\theta$ , where $\theta _H=0.36\pm 0.018$ (95 %) and $\theta _L=0.38\pm 0.02$ (95 %) for heavy and light shock first experiments, respectively, indicating no strong dependence on the order of shock wave arrival. Volume integrated specific turbulent kinetic energy (TKE) in the mixing layer versus time is found to decay according to $E_{tot}/\bar {\rho }\propto t^p$ with $p_H=-0.823\pm 0.06$ (95 %) and $p_L=-1.061\pm 0.032$ (95 %) for heavy and light shock first experiments, respectively. Notably, the 95 % confidence intervals do not overlap. Analysis on the influence of the shock-to-reshock time on turbulent length scales, transition criteria, spectra and mixing layer anisotropy are also presented.

Ferguson, Kevin (ORCID:0000000166537482)↗