SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In the following note, prepared for the National Advisory Committee for Aeronautics, this induction factor is determined from the result of a model test, and compared with a formula recently developed by the author. The two results are found to be in substantial agreement.
This note has been prepared for the National Advisory Committee for Aeronautics. It deals with the model rules relating to aeronautical problems, and shows how the characteristics of one airplane can be determined from those of another airplane of different weight or size, and of similar type. If certain rules for the ratios of the dimensions, the weights and the horsepower are followed, a small low-powered airplane can be used for obtaining information as to performance, stability, controllability and maneuverability of a larger prototype, and contrariwise.
This note, prepared for the National Advisory Committee for Aeronautics, contains the demonstration that the pressure around the circular cross section of an elongated airship, plotted against the diameter of symmetry, can be expected to be represented by a straight line.
This note, prepared for the National Advisory Committee for Aeronautics, contains a discussion of the pressure distribution over ellipsoids when in translatory motion through a perfect fluid. An easy and convenient way to determine the magnitude of the velocity and of the pressure at each point of the surface of an ellipsoid of rotation is described. The knowledge of such pressure distribution is of great practical value for the airship designer. The pressure distribution over the nose of an airship hull is known to be in such good agreement with the theoretical distribution as to permit basing the computation of the nose stiffening structure on the theoretical distribution of pressure.
This note, prepared for publication by the National Advisory Committee for Aeronautics, is a collection of the tables of the factor of apparent mass that have been published up to now. The theory of the motion of solids in a perfect fluid is of the greatest value for the study of most aerodynamic problems, and the additional apparent mass of an immersed solid is the most important characteristic for such theoretical numerical computations. It will therefore be helpful to have the most important values of the apparent mass - for some elementary cases - collected in a convenient form.
Tests have been made by the National Advisory Committee for Aeronautics on the air flow in an open jet wind tunnel with various sizes, shapes, and spacings of cones, and the flow studied by means of velocity and direction surveys in conjunction with flow pictures. It was found that for all combinations of cones tested the flow is essentially the same, consisting of an inner core of decreasing diameter having uniform velocity and direction, and a boundary layer of more or less turbulent air increasing in thickness with length of jet. The energy ratio of the tunnel was obtained for the different combinations of cones, and the spilling around the exit cone causing undesirable air currents in the experiment chamber was noted. An empirical formula is given for the design of cones having no appreciable spilling.
A series of tests has been conducted by the National Advisory Committee for Aeronautics, in the variable density wind tunnel on several airfoils of different sizes and sections to determine the effect of tunnel wall interference and to determine a correction which can be applied to reduce the error caused thereby. The use of several empirical corrections was attempted with little success. The Prandtl theoretical correction gives the best results and its use is recommended for correcting closed wind tunnel results to conditions of free air.
This report is the first of a series of four on propeller design and contains a description of the blade elements or modified Drzewiecke theory as used in the Bureau of Aeronautics, U.S. Navy Department. Blade interference corrections are used which were taken from R.& M. NO. 639 of the British Advisory Committee for Aeronautics. The airfoil characteristics used were obtained from tests of model propellers, not from tests of model wings.
Tests have been made in the atmospheric wind tunnel of the National Advisory Committee for Aeronautics to determine the effects of pitching oscillations upon the lift of an airfoil. It has been found that the lift of an airfoil, while pitching, is usually less than that which would exist at the same angle of attack in the stationary condition, although exceptions may occur when the lift is small or if the angle of attack is being rapidly reduced. It is also shown that the behavior of a pitching airfoil may be qualitatively explained on the basis of accepted aerodynamic theory.
This paper is the first of a series of notes, each of which presents the complete results of pressure distribution tests made by the National Advisory Committee for Aeronautics, on single-wing ribs of the VE-7 and TS airplanes for a particular condition of flight. The level flight results are presented here in the form of curves and show the comparison between the pressure distribution over a representative thin wing, R.A.F.-15, and a moderately thick wing, U.S.A.-27, throughout the range of angle of attack.
This note describes tests of the drag due to a Wright "Whirlwind" (J-5) radial air-cooled engine mounted on a cabin type airplane. The tests were made in the 20-foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics. The drag was obtained with three different types of exhaust stacks: Short individual stacks, a circular cross section collector ring, and a streamline cross section collector ring.
In order to study the effect of the fuselage, landing gear, and engine on the air flow through the propeller, a survey was made in the plane of the Sperry Messenger propeller with the propeller removed. The tests were made in the 20-foot air stream of the propeller research tunnel of the National Advisory Committee for Aeronautics at Langley Field, Virginia. The variation of the velocity with distance from the center in the propeller plane was found to be appreciable and well worth consideration in the design of propellers. It was also found that the velocity through the propeller plane was affected by the presence of the engine, and that the velocity in front of the landing gear was lower than that at other points in the propeller plane having the same radius.
This paper is the second of a series of notes, each of which presents the complete results of pressure distribution tests made at Langley Field by the National Advisory Committee for Aeronautics, on wing and tail ribs of the VE-7 and TS airplanes for a particular maneuver of flight. The results for pull-ups are presented in the form of curves which show the variation of pressure distribution, total loads, normal acceleration and center of pressure with respect to time.
This report presents test results obtained at the Langley Memorial Aeronautical Laboratory of the National Advisory Committee for Aeronautics during an investigation to determine the relative performance of a single-cylinder, high-speed, compression-ignition engine when using fuel injection valve nozzles with different numbers, sizes, and directions of round orifices. A spring-loaded, automatic injection valve was used, centrally located at the top of a vertical disk-type combustion chamber formed between horizontally opposed inlet and exhaust valves of a 5 inch by 7 inch engine.
Tests were made to determine the effect of fillets between wings and fuselage on the drag and propulsive efficiency of a high-wing cabin monoplane. These tests were made in the 20-foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics.
This note contains the results of tests to determine the resistance of four sizes of streamline wire. The investigation was conducted in the six-inch wind tunnel of the National Advisory Committee for Aeronautics. The tests were made at various velocities and it was found that the resistance of streamline wires was considerably less than that of round wires of equivalent strength. Scale effect was also found since, with an increase of Reynolds Number, a decrease in the resistance coefficient was obtained.
An investigation was made of the aerodynamic effects of reflexing the trailing edge of three commonly used airfoils. Six airfoils were used in the investigation: three having the normal profiles of the Navy 60, the Boeing 106, and the Gottingen 398, and three having these profiles modified to obtain a reflexed trailing edge with the mean camber line changed to give Cmc/4=0. The tests were conducted at a value of the Reynolds Number of approximately 3,100,000 in the variable density wind tunnel of the National Advisory Committee for Aeronautics. Measurements of lift, drag, and pitching moment were made on each of the six airfoils. The expected reduction of the center of pressure travel was obtained. The maximum lift was reduced approximately 12 per cent and the minimum profile drag approximately 4 per cent.
This report deals with pressure distribution tests on an airfoil with a conventional trailing edge flap. These tests were conducted in the Atmospheric Wind Tunnel of the National Advisory Committee for Aeronautics. Maximum chord loadings were obtained with the flap displaced downward and with the airfoil at large angles of attack. Greater changes were produced in the normal force and in the center of pressure travel by up-flap than by an equal down-flap displacement.