Search NASA⌕ Search

SEARCH · Search NASA

Results for “Acceleration radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Signatures of ambient pressure superconductivity in thin film La 3 Ni 2 O 7

Recently, the bilayer nickelate La 3 Ni 2 O 7 has been discovered as a new superconductor with transition temperature T c near 80 K under high pressure. Despite extensive theoretical and experimental work to understand the nature of its superconductivity, the requirement of extreme pressure restricts the use of many experimental probes and limits its application potential. Here, in this work, we present signatures of superconductivity in La 3 Ni 2 O 7 thin films at ambient pressure, facilitated by the application of epitaxial compressive strain. The onset T c varies approximately from 26 K to 42 K, with higher T c values correlating with smaller in-plane lattice constants. We observed the co-existence of other Ruddlesden-Popper phases within the films and dependence of transport behavior with ozone annealing, suggesting that the observed low zero resistance T c of around 2 K can be attributed to stacking defects, grain boundaries, and oxygen stoichiometry. This finding initiates numerous opportunities to stabilize and study superconductivity in bilayer nickelates at ambient pressure, and to facilitate the broad understanding of the ever-growing number of high temperature and unconventional superconductors in the transition metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

BCS-BEC crossover driven by small Fermi pockets of a high- T c cuprate superconductor

Fermi arcs observed in underdoped cuprates have sparked debate over whether they represent segments of a large Fermi surface or small Fermi pockets. This ambiguity has long hindered their classification as either the conventional Bardeen-Cooper-Schrieffer (BCS) regime or the strongly coupled Bose-Einstein condensation (BEC) crossover limit. Here, using angle-resolved photoemission spectroscopy and quantum oscillations, we demonstrate the coexistence of a small Fermi pocket and a large superconducting gap in the clean inner CuO 2 layers of the four-layer cuprate Ba 2 Ca 3 Cu 4 O 8 (F,O) 2 . This coexistence constitutes a hallmark of the BCS-BEC crossover and has remained elusive for decades. Despite the presence of antiferromagnetic (AF) order, the superconducting gap in the small pocket is remarkably large, yielding a gap-to-Fermi energy ratio (Δ pocket /ε F ~ 0.6) and a critical-to-Fermi temperature ratio (T c /T F ~ 0.13) that reach the theoretical upper bound for two-dimensional superconductivity. Unexpectedly, this BCS-BEC crossover emerges not as the carrier density decreases but as it increases, abruptly within a narrow doping range of less than 1%. These results provide a long-sought microscopic foundation for the d-wave pairing mechanism in doped AF-Mott insulators.

Jeong, Junhyeok [University of Tokyo, Kashiwa (Jap↗

Promoting the regulatory acceptance of combined ion and neutron irradiation for material degradation in nuclear reactors

The Advanced Materials and Manufacturing Technologies (AMMT) program within the Department of Energy (DOE) Office of Nuclear Energy has developed its current recommendation for promoting the use of combined ion irradiation and neutron irradiation for the accelerated qualification of materials to be deployed in nuclear reactors. This plan is intended to provide a collaborative path forward that can be adopted by academia, national laboratories, and industry, and has been developed with input from the regulatory research arm of the U.S. Nuclear Regulatory Commission (NRC). To deploy new materials or materials manufactured with new technologies, such as additive manufacturing, materials must be evaluated for reactor-induced degradation from the combination of harsh temperatures, corrosive environments, and radiation fields. However, rapid deployment of materials necessitates accelerated testing methods rather than relying on years of neutron irradiation in a material test reactor. Ion irradiation has demonstrated success in reproducing material microstructure and select property evolution resulting from neutron irradiation with three to four orders of magnitude reduction in time and cost, making it an ideal candidate for accelerated irradiation testing. This presentation provides context governing both the scientific and regulatory aspects of the proposed goal. The discussion is aimed at a broad audience including researchers from industry, national laboratories, and academia. The recommended path forward is presented as a conceptual framework of specific steps. In brief, the strategy entails developing an integrated ion and neutron irradiation test plan for the material property of interest based on the fundamental tenet of the linkage of microstructure and properties in materials. Physics-based modeling interprets ion irradiation data and predicts neutron irradiation microstructure and properties with uncertainty bounds. The first round of testing is sufficient for an initial licensing application using a risk-informed approach, while a minimum required neutron irradiation test plan reduces cost and time requirements. A surveillance program with witness specimens in-reactor provides additional data over time to improve model predictions to higher damage levels and further reduce uncertainty bounds, which can be used for license extensions or longer lifetimes in new license applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Parallel Simulation of Beam Dynamics in Particle Accelerators [Slides]

LW3D was used to explore the expected CSR from an undulator-based diagnostic using a first-principles approach. It was also used for comparison with an analytic Green-function approach. LW3D was extended to model transport systems involving dipoles and quadrupoles. It was used to explore the radiation produced in a 4-dipole bunch compressor. Radiation ahead of the electron bunch at the beamline exit was shown to be associated with wavefronts produced in upstream dipoles overtaking the bunch.

43 PARTICLE ACCELERATORS↗

Long-range magnetic order with disordered spin orientations in a high-entropy antiferromagnet

Disorder in magnetic systems typically suppresses long-range order, promoting short-range states such as spin glasses and magnetic clusters. This is particularly prominent in high-entropy materials, characterized by the random distributions of local magnetic entities and exchange interactions. However, in rare exceptions, long-range magnetic order can persist in high-entropy systems, while the microscopic characters and underlying mechanisms remain elusive, especially the magnetic behaviors of individual elements. Here, combining neutron diffraction and resonant soft x-ray scattering, we have conducted an element-specific investigation into the magnetic order of a high-entropy honeycomb-lattice van der Waals material (Mn 1/4 Fe 1/4 Co 1/4 Ni 1/4 )PS 3 . Despite significant atomic disorder, long-range zigzag antiferromagnetic order is observed below 72 K, with all four transition-metal elements participating in a unified phase transition. However, the spin orientations of various elements are distinct, attributed to the competition between single-ion anisotropies and exchange interactions. Our findings showcase a novel form of long-range magnetic order with disordered spin orientations, which is synergically stabilized by distinct magnetic elements in a high entropy magnet, offering a new paradigm for understanding complex magnetic systems.

Shen, Yao [Chinese Academy of Sciences (CAS), Beij↗

Pulsed Beam Heating Analysis of Curved Inconel Window with Pressurized Helium Gas Cooling

Los Alamos National Laboratory (LANL) is working with NorthStar medical Radioisotopes (NMR) on their efforts to produce Mo-99 through the irradiation of Mo-100 using Rodotron electron accelerators. Two Rhodotron accelerators are used to irradiate a double sided target. LANL collaborates with NMR to experimentally investigate beam effects on the target which consists of two Inconel 718 windows on either side of a stack of Mo-100 discs. LANL simulates the beam heating using an induction heater.

07 ISOTOPE AND RADIATION SOURCES↗

Mechanistic Insights into the Surface Instabilities of TiNb 2 O 7, a High‐Power Li‐Ion Anode

TiNb 2 O 7 (TNO) is a promising Li-ion battery anode for high-power applications, such as implantable medical devices and heavy-duty equipment. Hailed as being safe due to its elevated operating potential near 1.6 V, TNO has long been assumed to be highly stable in the carbonate-based electrolytes used in Li-ion batteries. Herein, all mechanisms occurring at the surface of both TNO and Nd-doped TNO are identified, and both materials in fact show significant gassing. CO 2 is even released at open circuit conditions, demonstrating the poor chemical stability of the material in the electrolyte even prior to battery operation. Such extreme instability is a critical safety concern. In addition, it was found that Ti dissolves from the surface of TNO particles at low voltage (below 1.4 V vs Li), and in fact deposits on the counter electrode. Ti further inside TNO particles then diffuses to the Ti-poor surface during discharge. Partial carbon-coating as a mitigating measure has also been tested and found to exacerbate these processes. The findings identify novel reactions occurring within TNO, and clearly highlight the need to stabilize the surfaces of TNO in order to prevent such aggressive deterioration at the surface of the particles.

25 ENERGY STORAGE↗

Controlling Exsolution Dynamics in High‐Entropy Oxides for Highly Active and Selective Acetylene Semi‐Hydrogenation

Exsolution-derived catalysts feature robust metal–support interactions that enhance catalytic performance; yet achieving precise control over exsolution dynamics in multicomponent oxides remains challenging. In this study, we demonstrate that exsolution behavior in high-entropy oxides (HEOs) can be rationally tuned through coupled lattice- and valence-engineering to create a highly active and selective catalyst for acetylene semi-hydrogenation. Incorporation of Li + into a rock salt-structured HEO (LiNiMgCuZnCoO x and LiHEO) induces local lattice distortion, generates oxygen vacancies, and partially oxidizes Co sites from Co 2+ to Co 3+ , collectively modulating local charge redistribution. This strategy enables facilitated Cu nanoparticle exsolution and alters the exsolution sequence from Cu 0 > Ni 0 > Co 0 in pristine HEO to Cu 0 > Co 0 > Ni 0 in the LiHEO. The resulting catalyst via controlled exsolution exhibits superior activity and ethylene selectivity, outperforming state-of-the-art transition metal systems. This work establishes entropy-enabled lattice and valence engineering as a facile route to programmable exsolution for enhanced catalysis.

36 MATERIALS SCIENCE↗

Zr 3 Mn 3 Sn 4 Ga: A new hetero-kagome bilayer antiferromagnet

Here, we report the magnetic and electrical transport properties of single-crystalline Zr 3 Mn 3 Sn 4 Ga, featuring two distinct kagome lattices: a non-magnetic breathing Zr 3 Sn 4 lattice and a magnetic intact Mn 3 Ga lattice. The material undergoes an antiferromagnetic phase transition at T N = 87 K, with neutron diffraction confirming commensurate ordering characterized by k = (1/3,1/3,0). Transport measurements show metallic behavior, a resistivity anomaly near T N , and 12% magnetoresistance at 2 K under 9 T. Deviations from the conventional second-order power law, along with negative magnetoresistance and nonlinear Hall slope variations near T N , suggest strong magneto-electronic coupling. Resonant photoemission spectroscopy identifies Zr 4d and Mn 3d orbitals as dominant contributors to the valence band, linking the material’s unique electronic properties to its kagome layers. Zr 3 Mn 3 Sn 4 Ga offers a valuable platform to study interactions between magnetism and topological electronic bands in hetero-kagome systems using the co- existence of magnetic and non-magnetic kagome layers and its tunable electronic structure.

Crystal structure↗

One-Dimensional Electron Gas Confined along Nanowrinkles in a Unidirectional Charge Density Wave Material

Two-dimensional (2D) materials inherently exhibit instabilities. Structurally, this may lead to modulations along the third dimension, e.g., wrinkles. Electronically, 2D instabilities can manifest themselves as charge density waves (CDWs). Although wrinkles can alter anisotropic electronic structures susceptible to forming CDWs, less is known about their impact on broken-symmetry ground states. Here, in this study, using scanning tunneling microscopy and spectroscopy, we investigate the CDW states on the wrinkled surface of DyTe 3 . We identify elongated, parallel nanoscale wrinkles stabilized by ribbon-shaped defects. Interestingly, the CDW order persists across the nanowrinkles with a gradual phase shift but is locally suppressed near the defects, where phase windings occur. In addition, these defects induce quantum confinement effects along the nanowrinkles, indicating the presence of one-dimensional metallic states with hole- like dispersion, while angle-resolved photoemission spectroscopy identifies a gap along the wrinkle direction. We ascribe this discrepancy to strain-induced changes in the Fermi surface, which lead to the closure of the gap at the sites of the nanowrinkles. Taken together, our results underscore the complex interplay between structural features and Fermi surface topology, allowing for the deliberate manipulation of quantum states in strongly correlated systems via local crystal deformations.

nanowrinkles↗

Thermal processing to modulate surface chemistry and bulk charge distribution in nickel-rich layered lithium positive electrodes

The broader application of nickel-rich layered oxides as positive electrode materials for lithium-ion batteries has been hindered by their high manufacturing cost and inferior cycling stability. Thermal processing, which is integral to electrode materials manufacturing and fundamental in materials science, has not been fully utilized to design advanced positive electrode materials. Herein, we demonstrate the capability of using quenching heat treatment to regulate Li distribution and modulate electronic structure near particle surface. The resulting materials exhibit less parasitic reactions with the electrolyte and an improved charge distribution homogeneity in secondary particles, leading to more stable cycling performance at high voltages (4.5 V vs Li/Li + ). Our synchrotron X-ray analyses reveal the underlying interplay between surface structure and bulk charge distribution in positive electrode materials particles. While strategies used to stabilize positive electrode materials through compositional control, surface modification, and electrolyte engineering have become mature, thermal processing can be advantageous to further improve positive electrode materials manufacturing.

36 MATERIALS SCIENCE↗

Band-Selective Spin-Charge Separation across the Charge Density Wave Transition in Quasi-1D NbSe 3

Non-Fermi liquid (non-FL) phase is a pivotal enigma in understanding intriguing quantum phases in strongly correlated systems, such as high-temperature superconductivity. Tomonaga-Luttinger liquid (TLL) theory, designed for one-dimensional (1D) systems, serves as one of the microscopic frameworks that elucidates non-FL behavior. Despite its theoretical concreteness, comprehensive experimental verification has remained incomplete. In particular, addressing the persistence of the TLL nature within ordered phases, such as charge density wave (CDW), has posed a significant challenge. We report the observation of TLL characteristics across the CDW transitions in a quasi-1D material NbSe 3 using angle-resolved photoemission spectroscopy. Spin-charge separation, a disentanglement of spin and charge degrees of freedom of electrons, is clearly observed within the band, accompanied by the suppression of spectral weight following a power-law behavior with anticipated temperature scaling. Surprisingly, the spin-charge separation persists even below the CDW transition temperatures, indicating the validity of the TLL nature in the CDW phase. In conclusion, our findings offer a unique opportunity to explore the interplay between the TLL and ordered phases, which could be connected to the interplay between non-FL and ordered phases in strongly correlated systems.

1-dimensional systems↗

Near-half-metallic state in the half-Heusler PtMnSb film on a III-V substrate

The interplay between half-metallic ferromagnetism and spin-orbit coupling within the inversion-symmetry-broken structure of half Heuslers provides an ideal platform for various spintronics functionalities. Taking advantage of good lattice matching, it is highly desired to epitaxially integrate promising Heuslers into III-V semiconductor-based devices. PtMnSb is one of the first half Heuslers predicted to be an above-room-temperature half-metal with large spin orbit coupling, however, its half-metallicity and potential as a spintronics material has remained elusive due to lack of high quality samples. Here, in this study, we demonstrate epitaxial growth of single crystal PtMnSb(001) film on GaSb(001) substrates using molecular beam epitaxy. Direct observation of the band structure via angle-resolved photoemission spectroscopy and many-body perturbation theory within the quasi-particle self-consistent GW approximation (QPGW) reveal that PtMnSb hosts rather a near-half-metallic state with both spin bands crossing the Fermi level and with high spin polarization over 90%. Temperature dependence of magnetization also shows an anomalous enhancement below 60 K, which can be associated with the development of such a near-half-metallic state at low temperatures. Epitaxial growth of high crystalline PtMnSb on a III-V paves the way for systematic clarification of its spin transport properties with fine-tuning of strain in heterostructure devices.

36 MATERIALS SCIENCE↗

High power targets: Challenges of next-generation high-intensity neutrino beams

High power target systems are crucial elements in enabling future neutrino and other rare particle beams. These systems transform intense source of protons into secondary particles of interest to enable new scientific discoveries. As primary beam intensities increase in next-generation multi-megawatt accelerator facilities, high power target systems face key challenges. Thermal shock and radiation damage effects in beam-intercepting devices were identified as the leading cross-cutting challenges of high-power target facilities. Target materials R&D to address these challenges are therefore essential to enable and ensure reliable operation of future accelerator target facilities. This paper provides an overview of the R&D activities underway to help support high power target systems development for next-generation multi-MW facilities.

43 PARTICLE ACCELERATORS↗

Conductivity-Driven Origin of the Limiting Current in Concentrated Electrolytes

Next-generation electrolyte materials are hindered by their ability to support high currents essential for fast-charge and high-power battery applications. The maximum current supported by an electrolyte, the limiting current, is dictated by the formation of concentration gradients across the electrolyte under an electric field. Most of the literature attributes the onset of the limiting current in concentrated electrolytes to the salt concentration at the positive electrode approaching the solubility limit. Here, in this study, we leverage operando X-ray transmission imaging to measure spatiotemporal salt concentration profiles of a polymer electrolyte in a lithium–indium symmetric cell at a current exceeding the limiting current. The measurement of concentration profiles enables mapping the spatiotemporal electric potential, which comprises an ohmic contribution, governed by conductivity, and an overpotential related to maintaining concentration gradients. We find that a precipitous drop in conductivity at the positive electrode drives the divergence of electric potential, rather than a thermodynamic solubility limit.

Abdo, Emily E. [University of California, Berkeley↗

Excessive charge, beam loading, and impedance collapse thresholds for a velvet emitter

Excess emission has been observed from velvet cathodes with total emission times >150 ns. In this diode experiment, we produce a sub-relativistic electron beam with the ability to consistently change γ from 1.2 to 1.5 and β = 0.5–0.75. Electron emission in this particular diode geometry requires electric fields >40 kV/cm. The current increases at steady rates >0.05 A/ns after the head of the pulse, indicating an expansion of the emission surface and reduction in the effective AK gap. Small transients of excess emission (or arcs) are consistently observed for current pulses exceeding 150 ns. The excess emission results in beam loaded levels ≥10 kV on the diode voltage. The effects described here are compounded as diode voltage is increased. The principal objective of these experiments is to quantify electric field emission thresholds, current ramps, excess emission delays, effective beam loading, and impedance collapse.

43 PARTICLE ACCELERATORS↗

Development of Low-Power H - Proton Beam Capability in Area-A

A low-power proton beam capability in Area-A will support NNSA, LANL, Global Security, DoD, and Office of Science missions. It will also provide a stepping-stone towards other future uses of Area-A. We propose a cost-effective technical approach to achieve this goal. The main focus of this project will be to provide beam for a radiation effect beamline and a second pRad beamline.

43 PARTICLE ACCELERATORS↗