SEARCH · Search NASA

Results for “Aerocapture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Design optimization for a space based, reusable orbit transfer vehicle

Future NASA and DOD missions will benefit from high performance, reusable orbit transfer vehicles. With the advent of a space station, advanced engine technology, and various new vehicle concepts, reusable orbit transfer vehicles that provide significant economic benefits and mission capability improvements will be realized. Engine and vehicle design criteria previously have lacked definition with regard to issues such as space basing and servicing, man-rating and reliability, performance, mission flexibility, and life cycle cost for a reusable vehicle. The design study described here has resulted in the definition of a reusable orbit transfer vehicle concept and subsequent recommendations for the design criteria of an advanced LO2/LH2 engine. These design criteria include number of engines per vehicle, nozzle design, etc. The major characteristics of the vehicle preliminary design include low lift to drag aerocapture capability, a main propulsion system failure criteria of fail operational/fail safe, and either two main engines with a high performance attitude control system for back-up or three main engines with which to meet this failure criteria. In addition, a maintenance approach has been established for the advanced vehicle concept.

Redd, L.↗

NASA NTRS1985

Advanced orbit transfer vehicle propulsion system study

A reuseable orbit transfer vehicle concept was defined and subsequent recommendations for the design criteria of an advanced LO2/LH2 engine were presented. The major characteristics of the vehicle preliminary design include a low lift to drag aerocapture capability, main propulsion system failure criteria of fail operational/fail safe, and either two main engines with an attitude control system for backup or three main engines to meet the failure criteria. A maintenance and servicing approach was also established for the advanced vehicle and engine concepts. Design tradeoff study conclusions were based on the consideration of reliability, performance, life cycle costs, and mission flexibility.

Cathcart, J. A.↗

NASA NTRS1985

Mars sample-return options

Attention is given to the comparative merits of two options for the return to earth of Mars round-trip sampling probe missions. The first option makes use of an onboard propulsion system to place the returning vehicle into a highly elliptical orbit around the earth. An orbital transfer vehicle (OTV) or OTV/orbital maneuvering vehicle combination retrieves the sample from the return vehicle. The second option uses aerocapture to place the return vehicle in earth orbit; this maneuver imposes no greater weight penalty for proceeding to a low orbit than remaining at one that is high. The second option delivers the sample to a Space Station-compatible orbit for pickup.

French, J. R.↗

NASA NTRS1985

A Mars sample return mission using a rover for sample acquisition

Mission and vehicle concepts are discussed for obtaining surface and subsurface samples of Mars, acquired by a roving vehicle, and returning those samples to earth for detailed analyses in scientific laboratories. Mission options that were traded off in order to arrive at a baseline mission considered most worthy of further study comprised the following: (1) direct entry vs entry out of Mars orbit; (2) direct return from the Mars surface vs rendezvous in Mars orbit and return to earth from there; and (3) propulsive orbit injection and aeroballistic entry (similar to Viking) vs aerocapture into Mars orbit and aeromaneuvering entry. After a comparison of relative merits - based primarily on mass and cost estimates and secondarily on configurational constraints - a baseline mission was selected: out-of-orbit entry, return after Mars orbit rendezvous, and aerocapture/aeromaneuvering. Trajectory design is based on the 1996 launch opportunity. Launch mass requirements for eight mission options, a mission and vehicle description for the baseline mission, and the outline of a mission sequence of events are presented.

De Vries, J. P.↗

NASA NTRS1986

Mars vehicle TCS and aerobrake TPS

General design approach, some problems and technology needs for a Mars vehicle manned module Thermal Control System (TCS) and aerobrake Thermal Protection System (TPS) are discussed. The design approach of the TCS will be similar to that of the space station. Mars atmospheric dust storms are identified as an unknown that will impact the design of the Mars landing vehicle and base facility. New technology may be needed for thermal control surfaces to functionally survive the dust storms. The TPS for the Mars aerocapture vehicle will be subject to marginal stagnation heating rates for conjunction class missions and very high heating rates for opposition class missions. New technology TPS materials or an ablative heat shield will be required for the high stagnation heating rate trajectories. No significantly new technology is needed for the manned modules that do not descent to the Mars surface.

Comer, G.↗

NASA NTRS1988

Mars sample return - Science

The possible scientific goals of a Mars sample return mission are reviewed, including the value of samples and the selection of sampling sites. The fundamental questions about Mars which could be studied using samples are examined, including planetary formation, differentiation, volcanism and petrogenesis, weathering, and erosion. Scenarios are presented for sample acquisition and analysis. Possible sampling methods and tools are discussed, including drilling techniques, types of rovers, and processing instruments. In addition, the possibility of aerocapture out of elliptical or circular orbit is considered.

Blanchard, Douglas P.↗

NASA NTRS1989

Conceptual design of the Mars Rover Sample Return system

The results of the prephase A study of the Mars Rover Sample Return system are presented. Four mission scenarios are studied, two in the B-configuration, and two D-configuration missions. They incorporated variations in delivery-to-Mars mode, earth-return mode (propulsive or aerocapture), landing site latitude, and rover size and capability in order to identify system drivers.

Rose, James R.↗

NASA NTRS1989

Optimal aeroassisted guidance using Loh's term approximations

This paper presents three guidance algorithms for aerocapture and/or aeroassisted orbital transfer with plane change. All three algorithms are based on the approximate solution of an optimal control problem at each guidance update. The chief assumption is that Loh's term may be modeled as a function of the independent variable only. The first two algorithms maximize exit speed for fixed exit altitude, flight path angle and heading angle. The third minimizes, in one sense, the control effort for fixed exit altitude, flight path angle, heading angle and speed. Results are presented which indicate the near optimality of the solutions generated by the first two algorithms. Results are also presented which indicate the performance of the third algorithm in a simulation with unmodeled atmospheric density disturbances.

Mceneaney, W. M.↗

NASA NTRS1990

Aerobrakes For A Manned Mars Mission

Paper presents results of study of aerobraking in manned mission to Mars. Describes geometry and aerodynamic characteristics of aerobraked vehicle. Discusses computer program, WTRAJ, used to simulate trajectories near planets. Analyzes aerocapture processes for both Mars and Earth. Examines mass efficiency, or saving in propellant mass, afforded by aerobraking.

Menees, G. P.↗

NASA NTRS1989

An international Mars exploration program

The scientific reasons for a Mars exploration program are reviewed, and the robotic phase of such a program is examined. The functions and requirements of the rovers, surface stations and penetrators are addressed, as are those of the imaging and communications orbiters. The navigational functions which support the aerocapture and landing vehicles are examined.

Rea, Donald G.↗

NASA NTRS1989

Mars Rover and Sample Return Mission design

The current reference Mars Rover and Sample Return mission is described. Technical issues are outlined, including high-resolution image acquisition and reconstruction, approach navigation, ground and flight systems operational complexity, rover autonomy, autonomous rendezvous and docking in Mars orbit, aerocapture and aeromaneuver, estimating the probability of mission success, and end-to-end information system design. Focus is placed on lander hazard identification and avoidance, pinpoint landing guidance and control, Mars ascent vehicle guidance and control, planetary protection and quarantine, sample acquisition and preservation, project management and control, systems requirements and interface control, and costing. In addition, program issues such as international participation, fiscal constraints, and launch-vehicle availability are considered.

Kwok, Johnny H.↗

NASA NTRS1990

Aerodynamic requirements of a manned Mars aerobraking transfer vehicle

In this investigation, entry corridor analyses are performed to identify the aerodynamic requirements of a manned Mars aerobraking transfer vehicle. The major emphasis is on identifying the required aerobrake hypersonic L/D to insure a successful aerocapture. Aerobraking entry requirements are also imposed on a set of interplanetary mission opportunities to demonstrate their effect on mission flexibility. Based on the requirements of a 1 deg corridor width, deceleration into a parking orbit witn an apoapsis altitude of 32,972 km, and a 5-g deceleration limit, a manned Mars aerobrake characterized by an L/D of at least 1.5 is required for entry velocities as high as 10.0 km/sec. Limiting the Mars entry velocity to values below 8.5 km/sec is shown to induce a minor restriction on mission flexibility while alleviating aerothermodynamic and vehicle packaging concerns; hence, Mars entry velocities in the range of 6.0-8.5 km/sec are suggested, and a manned Mars aerobrake characterized by an L/D between 0.3 and 0.5 is recommended.

Braun, Robert D.↗

NASA NTRS1990

21st century early mission concepts for Mars delivery and earth return

In the 21st century, the early missions to Mars will entail unmanned Rover and Sample Return reconnaissance missions to be followed by manned exploration missions. High performance leverage technologies will be required to reach Mars and return to earth. This paper describes the mission concepts currently identified for these early Mars missions. These concepts include requirements and capabilities for Mars and earth aerocapture, Mars surface operations and ascent, and Mars and earth rendezvous. Although the focus is on the unmanned missions, synergism with the manned missions is also discussed.

Cruz, Manuel I.↗

NASA NTRS1991

Technologies for aerobraking

Aerobraking is one of the largest contributors to making both lunar and Mars missions affordable. The use of aerobraking/aeroassist over all propulsive approaches saves as much as 60 percent of the initial mass required in low earth orbit (LEO); thus, the number and size of earth to orbit launch vehicles is reduced. Lunar transfer vehicles (LTV), which will be used to transport personnel and materials from LEO to lunar outpost, will aerobrake into earth's atmosphere at approximately 11 km/sec on return from the lunar surface. Current plans for both manned and robotic missions to Mars use aerocapture during arrival at Mars and at return to Earth. At Mars, the entry velocities will range from about 6 to 9.5 km/sec, and at Earth the return velocity will be about 12.5 to 14 km/sec. These entry velocities depend on trajectories, flight dates, and mission scenarios and bound the range of velocities required for the current studies. In order to successfully design aerobrakes to withstand the aerodynamic forces and heating associated with these entry velocities, as well as to make them efficient, several critical technologies must be developed. These are vehicle concepts and configurations, aerothermodynamics, thermal protection system materials, and guidance, navigation, and control systems. The status of each of these technologies are described, and what must be accomplished in each area to meet the requirements of the Space Exploration Initiative is outlined.

Cooper, David M.↗

NASA NTRS1991

Applications of low lift to drag ratio aerobrakes using angle of attack variation for control

Several applications of low lift to drag ratio aerobrakes are investigated which use angle of attack variation for control. The applications are: return from geosynchronous or lunar orbit to low Earth orbit; and planetary aerocapture at Earth and Mars. A number of aerobrake design considerations are reviewed. It was found that the flow impingement behind the aerobrake and the aerodynamic heating loads are the primary factors that control the sizing of an aerobrake. The heating loads and other loads, such as maximum acceleration, are determined by the vehicle ballistic coefficient, the atmosphere entry conditions, and the trajectory design. Several formulations for defining an optimum trajectory are reviewed, and the various performance indices that can be used are evaluated. The 'nearly grazing' optimal trajectory was found to provide the best compromise between the often conflicting goals of minimizing the vehicle propulsive requirements and minimizing vehicle loads. The relationship between vehicle and trajectory design is investigated further using the results of numerical simulations of trajectories for each aerobrake application. The data show the sensitivity of the trajectories to several vehicle parameters and atmospheric density variations. The results of the trajectory analysis show that low lift to drag ratio aerobrakes, which use angle of attack variation for control, can potentially be used for a wide range of aerobrake applications.

Mulqueen, J. A.↗

NASA NTRS1990

Technologies for aerobraking

Aerobraking is one of the largest contributors to making both lunar and Mars missions affordable. The use of aerobraking/aeroassist over all-propulsive approaches saves as much as 60 percent of the initial mass required in LEO, thus reducing the number and size of earth-to-orbit launch vehicles. Lunar transfer vehicles, which will be used to transport personnel and materials from LEO to lunar outposts, will aerobrake into earth's atmosphere at aproximately 11 km/sec on return from the lunar surface. Current plans for both manned and robotic missions to Mars use aerocapture during arrival at Mars and at earth return. At Mars, the entry velocities will range from about 6 to 9.5 km/sec, and at earth the return velocity will be about 12.5 to 14 km/sec. In order to successfully design aerobrakes to withstand the aerodynamic forces and heating associated with these entry velocities, as well as to make them efficient, several critical technologies must be developed. These are vehicle concepts and configurations, aerothermodynamics, thermal protection system materials, and guidance, navigation, and control systems. This paper describes the status of each of these technologies and outlines what must be accomplished in each area to meet the requirements of the Space Exploration Initiative.

Cooper, David M.↗

NASA NTRS1990

Mars sample return missions, precursors to manned planetary exploration

Technologies and concepts applicable to eventual manned exploration of Mars, as demonstrated by the Mars Sample Return Mission, are presented. These include aerocapturing at Mars; safe and accurate descent and landing effectively using aerobraking and propulsion; launch and ascent from the Martian surface; rendezvous and docking with an orbiting return vehicle; and a safe return to earth. Critical mission elements are expected to function independently of either earth or astronaut control to ensure human safety. The Mars Rover Sample Return Mission includes such elements as autonomous functions in this unmanned mission. Based on the analyses performed and the concepts investigated, it is suggested that robotic missions are feasible for late 1990s without any major technology development being required.

Stager, D. N.↗

NASA NTRS1991

The effects of shock wave precursors ahead of hypersonic entry vehicles

A model has been developed to predict the magnitude and characteristics of the shock wave precursor ahead of a hypervelocity vehicle. This model includes both chemical and thermal nonequilibrium, utilizes detailed mass production rates for the photodissociation and photoionization reactions, and accounts for the effects of radiative absorption and emission on the individual internal energy modes of both atomic and diatomic species. Comparison of the present results with shock tube data indicates that the model is reasonably accurate. A series of test cases representing earth aerocapture return from Mars indicate that there is significant production of atoms, ions and electrons ahead of the shock front due to radiative absorption and that the precursor is characterized by an enhanced electron/electronic temperature and molecular ionization. However, the precursor has a negligible effect on the shock layer flow field.

Stanley, Scott A.↗