Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amorphization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Irradiation-Driven Restructuring of UO 2 Thin Films: Amorphization and Crystallization

Combustion synthesis in uranyl nitrate–acetylacetone–2-methoxyethanol solutions was used to deposit thin UO 2 films on aluminum substrates to investigate the irradiation-induced restructuring processes. Thermal analysis revealed that the combustion reactions in these solutions are initiated at ~160 °C. The heat released during the process and the subsequent brief annealing at 400 °C allow the deposition of polycrystalline films with 5–10 nm UO 2 grains. The use of multiple deposition cycles enables tuning of the film thicknesses in the 35–260 nm range. Irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of up to 1 × 10 17 ions/cm 2 ) is utilized to generate a uniform distribution of atomic displacements within the films. X-ray fluorescence (XRF) and alpha-particle emission spectroscopy showed that the films were stable under irradiation and did not undergo sputtering degradation. X-ray photoelectron spectroscopy (XPS) showed that the stoichiometry and uranium ionic concentrations remain stable during irradiation. The high-resolution electron microscopy imaging and electron diffraction analysis demonstrated that at the early stages of irradiation (below 1 × 10 16 ion/cm 2 ) UO 2 films show complete amorphization and beam-induced densification (sintering), resulting in a pore-free disordered film. Prolonged irradiation (5 × 10 16 ion/cm 2 ) is shown to trigger a crystallization process at the surface of the films that moves toward the UO 2 /Al interface, converting the entire amorphous material into a highly crystalline film. This work reports on an entirely different radiation-induced restructuring of the nanoscale UO 2 compared to the coarse-grained counterpart. The preparation of thin UO 2 films deposited on Al substrates fills an area of national need within the stockpile stewardship program of the National Nuclear Security Administration and fundamental research with actinides. Here, the method reported in this work produces pure, robust, and uniform thin-film actinide targets for nuclear science measurements

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the Roles of Amorphous Alumina Overcoat in Palladium-Catalyzed Selective Hydrogenation

Amorphous alumina overcoats generated by atomic layer deposition (ALD) have been shown to improve the selectivity and durability of supported metal catalysts in many reactions. Several mechanisms have been proposed to explain the enhanced catalytic performance, but the accessibilities of reactants through the amorphous overcoats remain elusive, which is crucial for understanding reaction mechanisms. Here, we show that an AlO x ALD overcoat is able to improve the alkene product selectivity of a supported Pd catalyst in acetylene (C 2 H 2 ) hydrogenation. We further demonstrate that the AlO x ALD overcoat blocks the access of C 2 H 2 (kinetic diameter of 0.33 nm), O 2 (0.35 nm), and CO (0.38 nm) but allows H 2 (0.29 nm) to access Pd surfaces. A H–D exchange experiment suggests that H 2 might dissociate heterolytically at the Pd–AlO x interface. These findings are in favor of a hydrogen spillover mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tunable Interfacial to Filamentary Resistive Switching Mechanism in Room-Temperature-Grown Amorphous YBa 2 Cu 3 O x with Excess Cu Addition

Resistive switching technologies have the potential not only to create large efficiency gains in computer memory but also to revolutionize emerging fields such as neuromorphic computing. In this paper, we report on novel resistive switching behavior in devices made from room-temperature-grown Cu-rich amorphous YBa 2 Cu 3 O x (YBCO) films, a material otherwise well-known as a high-temperature superconductor. In Nb:STO substrate/amorphous YBCO film (≈200 nm)/metallic Cu (15 nm)/metallic Pt (15 nm) devices, we demonstrate that the resistive switching can be tuned between mechanisms involving extended areas of the YBCO/electrode interface and a single-point filamentary mechanism simply by changing the Cu content of the deposition target and hence in the films. Changing the Cu content can also be used to optimize the properties of the devices further, with devices with an added 15 mol % of Cu in YBCO initially providing an on/off ratio >100, switching endurance potential >6500 cycles, and state retention >2 × 10 4 s, all at low switching fields of 0.3 MV/cm. The amalgam of promising resistive switching properties, fast growth (150 nm/min) at room temperature, and tuneability of the switching mechanism indicates the strong potential of this proof-of-concept amorphous system for future memory applications.

Cu↗
DOE OSTI2021

Experimental Verification of Ir 5d Orbital States and Atomic Structures in Highly Active Amorphous Iridium Oxide Catalysts

In iridium oxide catalysts, the electronic states whose energies are in the range of energetics and charge transfer kinetics of the oxygen evolution reaction (OER) originate from the Ir 5d orbital states. However, the understanding of the atomic structures and orbital states underlying catalytic reactivity in amorphous iridium oxide oxygen evolving catalysts (Ir-OECs) is incomplete compared to that of crystalline oxides, owing to a lack of direct experimental verification. Here, we present experimental approaches using resonant inelastic X-ray scattering (RIXS) to directly access Ir 5d orbital excitations at the Ir L 3 edge and atomic pair distribution function (PDF) measurements to characterize electronic and coordination structures at the atomic scale. The so-called iridium blue layer (IrBL) and IrO x were formed from the organometallic precursor complex [Cp*Ir(H 2 O) 3 ]SO 4 and the inorganic precursor IrCl 3 , respectively. Ex situ IrBL and IrO x films for RIXS and PDF measurements were prepared by conditioning electrodeposited films at a low voltage. The incident energy RIXS profile of IrO x exhibited extra weak resonantly enhanced excitation below 2 eV energy loss. The feature was clearly different from a single high-energy excitation above 3 eV of IrBL related to the interband transition between π- and σ-antibonding states. The atomic structure refinement based on PDF measurements revealed the atomic structure domains to have edge- and corner-shared IrO 6 octahedra with trigonal-type distortion. Furthermore, density functional theory calculations guided by the refined atomic structures shed light on the electronic structure corresponding to experimental results, including insulating and metallic phases in ex situ IrBL and IrO x films, respectively. Our study establishes different Ir 5d orbital states and atomic structures in two amorphous Ir oxide OER catalysts in their reduction states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spin Glass Behavior and Giant Magnetoresistance via Aliovalent Fe/Ni Alloying in Amorphous Tetrathiafulvalene-Tetrathiolate Coordination Polymers

The discovery of materials with programmable combinations of charge transport and magnetic properties is a major goal in synthetic chemistry. Molecular materials, such as coordination polymers (CPs), are emerging candidates in this field due to their synthetic modularity. While there are many conductive or magnetic CPs, single-component examples with both properties are still emerging. Here, in this work, we demonstrate how alloying paramagnetic Fe(III) centers into a highly conductive Ni-based CP results in novel amorphous materials with high conductivity and giant magnetoresistance. Aliovalent doping with paramagnetic Fe centers engenders spin-glass transitions, while Ni and the strong π-stacking interactions of tetrathiafulvalene-2,3,6,7-tetrathiolate (TTFtt) ligands support conductivity. Ni 0.69 Fe 0.31 TTFtt has σ ≈ 200 S/cm and a 1.8 K magnetoresistance of −52% at 5 T, among the largest for any coordination solid. This work demonstrates not only how magnetic properties can be rationally incorporated into conductive CPs, but also an unexpected potential for amorphous materials in spintronic applications.

amorphous materials↗
DOE OSTI2022

Electrochemically induced amorphous-to-rock-salt phase transformation in niobium oxide electrode for Li-ion batteries

Intercalation-type metal oxides are promising negative electrode materials for safe rechargeable lithium-ion batteries due to the reduced risk of Li plating at low voltages. Nevertheless, their lower energy and power density along with cycling instability remain bottlenecks for their implementation, especially for fast-charging applications. Here, we report a nanostructured rock-salt Nb 2 O 5 electrode formed through an amorphous-to-crystalline transformation during repeated electrochemical cycling with Li + . This electrode can reversibly cycle three lithiums per Nb 2 O 5 , corresponding to a capacity of 269 mAh g –1 at 20 mA g –1 , and retains a capacity of 191 mAh g –1 at a high rate of 1 A g –1 . Further, it exhibits superb cycling stability with a capacity of 225 mAh g –1 at 200 mA g –1 for 400 cycles, and a Coulombic efficiency of 99.93%. We attribute the enhanced performance to the cubic rock-salt framework, which promotes low-energy migration paths. Our work suggests that inducing crystallization of amorphous nanomaterials through electrochemical cycling is a promising avenue for creating unconventional high-performance metal oxide electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2025

Amorphous zinc–molybdenum–sulfide chalcogel as a long-cycle, high-capacity electrode for lithium-ion batteries

The inherent limitations of intercalation-based electrodes in lithium-ion batteries have prompted the search for alternative materials with higher specific capacities and robust electrochemical stability. Sulfur-based electrodes, despite their high theoretical capacities (1672 mAh g −1 ), typically suffer from poor cycling performance. In this work, zinc molybdenum polysulfide (Zn x Mo 3 S 13 , 0.5 ≤ x), an amorphous semiconductor chalcogel, exhibits high specific capacity and excellent cycling stability. Synchrotron X-ray pair distribution function and extended X-ray absorption fine structure analyses reveal a short-range atomic structure comprising Mo–Mo, M–S (M = Mo, Zn), and S–S bonding motifs. The coordination environment of Mo and S closely resembles that of Mo 3 S 13 clusters, interconnected via S–S bridges and Zn 2+ cations. The Li/Zn x Mo 3 S 13 cell delivers an initial discharge capacity of 844 mAh g −1 at C/3, and retains 386.2 mAh g −1 after 1000 cycles with an average coulombic efficiency of 99.99%. The distribution of relaxation times analysis confirms the formation of a stable solid electrolyte interphase, which underpins the cell's long-term stability. In conclusion, this outstanding performance is attributed to the synergistic effects of the chalcogel's unique amorphous framework, semiconductive character, Zn-mediated polysulfide anchoring, and structural resilience, positioning Zn x Mo 3 S 13 chalcogel among the most durable pure metal sulfide cathodes reported for next-generation LIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crystallization kinetics of amorphous acetonitrile nanoscale films

We measure the isothermal crystallization kinetics of amorphous acetonitrile films using molecular beam dosing and reflection adsorption infrared spectroscopy RAIRS techniques. Experiments on a graphene covered Pt(111) substrate revealed that the crystallization rate slows dramatically at long times and that the overall kinetics cannot be described by a simple application of the Avrami equation. The crystallization kinetics also have a thickness dependence with the thinner films crystallizing much slower than thicker ones. Additional experiments showed that decane layers at both the substrate and vacuum interfaces can also affect the crystallization rates. A comparison of the crystallization rates for CH 3 CN and CD 3 CN films showed only an isotope effect of ~1.09. When amorphous films were deposited on a crystalline film, the crystalline layer did not act as a template for the formation of a crystalline growth front. Finally, these overall results suggest that the crystallization kinetics complicated indicating the possibility of multiple nucleation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In situ investigation of ion irradiation-induced amorphization of (Ge 2 Sb 2 Te 5 ) 1−x C x [0 ≤ x ≤ 0.12]

Chalcogenide thin films that undergo reversible phase changes show promise for use in next-generation nanophotonics, microelectronics, and other emerging technologies. One of the many studied compounds, Ge2Sb2Te5, has demonstrated several useful properties and performance characteristics. However, the efficacy of benchmark Ge2Sb2Te5 is restricted by amorphous phase thermal stability below ∼150 °C, limiting its potential use in high-temperature applications. In response, previous studies have added a fourth species (e.g., C) to sputter-deposited Ge2Sb2Te5, demonstrating improved thermal stability. Our current research confirms reported thermal stability enhancements and assesses the effects of carbon on crystalline phase radiation response. Through in situ transmission electron microscope irradiation studies, we examine the effect of C addition on the amorphization behavior of initially cubic and trigonal polycrystalline films irradiated using 2.8 MeV Au to various doses up to 1 × 1015 cm −2 . It was found that increased C content reduces radiation tolerance of both cubic and trigonal phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of nuclear quantum effects on the electronic properties of amorphous carbon

We carry out quantum simulations to study the physical properties of diamond-like amorphous carbon by coupling first-principles molecular dynamics with a quantum thermostat, and we analyze multiple samples representative of different defective sites present in the disordered network. We show that quantum vibronic coupling is critical in determining the electronic properties of the system, in particular its electronic and mobility gaps, while it has a moderate influence on the structural properties. We find that despite localized electronic states near the Fermi level, the quantum nature of the nuclear motion leads to a renormalization of the electronic gap surprisingly similar to that found in crystalline diamond. We also discuss the notable influence of nuclear quantum effects on band-like and variable-hopping mechanisms contributing to electrical conduction. Our calculations indicate that methods often used to evaluate electron–phonon coupling in ordered solids are inaccurate to study the electronic and transport properties of amorphous semiconductors composed of light atoms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

High spatial resolution direct conversion amorphous selenium X-ray detectors with monolithically integrated CMOS readout

Recent progress in the field of micron-scale spatial resolution direct conversion X-ray detectors for high-energy synchrotron light sources serve applications ranging from nondestructive and noninvasive microscopy techniques which provide insight into the structure and morphology of crystals, to medical diagnostic measurement devices. Amorphous selenium ( a -Se) as a wide-bandgap thermally evaporated photoconductor exhibits ultra-low thermal generation rates for dark carriers and has been extensively used in X-ray medical imaging. Being an amorphous material, it can further be deposited over large areas at room temperatures and at substantially lower costs as compared to crystalline semiconductors. Here, to address the demands for a high-energy and high spatial resolution X-ray detector for synchrotron light source applications, we have thermally evaporated a -Se on a Mixed-Mode Pixel Array Detector (MM-PAD) Application Specific Integrated Circuit (ASIC). The ASIC format consists of 128 × 128 square pixels each 150 μm on a side. A 200 μm a -Se layer was directly deposited on the ASIC followed by a metal top electrode. The completed detector assembly was tested with 45 kV Ag and 23 kV Cu X-ray tube sources. The detector fabrication, performances, Modulation Transfer Function (MTF) measurements, and simulations are reported.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of temperature, doping, and amorphization on the electronic structure and magnetic damping of iron

Hybrid magnonic quantum systems have drawn increased attention in recent years for coherent quantum information processing, but too large magnetic damping is a persistent concern when metallic magnets are used. Their intrinsic damping is largely determined by electron-magnon scattering induced by spin-orbit interactions. In the low scattering limit, damping is dominated by intra-band electronic transitions, which has been theoretically shown to be proportional to the electronic density of states at the Fermi level. In this work, we focus on body-centered-cubic iron as a paradigmatic ferromagnetic material. We comprehensively study its electronic structure using first-principles density functional theory simulations and account for finite lattice temperature, boron (B) doping, and structure amorphization. Our results indicate that temperature induced atomic disorder and amorphous atomic geometries only have a minor influence. Instead, boron doping noticeably decreases the density of states near the Fermi level with an optimal doping level of 6.25%. In addition, we show that this reduction varies significantly for different atomic geometries and report that the highest reduction correlates with a large magnetization of the material. Furthermore, this may suggest materials growth under external magnetic fields as a route to explore in experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interface-independent sound speed and thermal conductivity of atomic-layer-deposition-grown amorphous AlN / Al 2 O 3 multilayers with varying oxygen composition

Dielectric amorphous multilayers (AMLs) play a critical role in a wide array of technologies such as optical coatings, nanoelectronics, energy harvesting, and recovery devices. However, despite their wide applications, a robust understanding of the effect of the interplay between chemical and structural disorder on the thermal properties of AMLs is still lacking. Therefore, in this paper, we experimentally and numerically investigate the effects of composition and interface density on the sound speed and thermal conductivity of a series of amorphous aluminum nitride and aluminum oxide multilayers grown via plasma-enhanced atomic layer deposition. To systematically change the composition, the oxygen content of the AMLs is proportionally varied with interface density during growth. We find that the longitudinal sound speed of these AMLs is dictated by the oxygen content instead of the number of interfaces. The thermal conductivity, in contrast, is dictated by both interface density and oxygen content. The interfaces act to decrease the thermal conductivity, whereas the oxygen content increases the thermal conductivity. Due to the competing influence of the interfaces and oxygen content, the thermal conductivity of the AMLs remains nearly constant as a function of interface density. Furthermore, our study provides crucial insights into the effect of the interplay of composition and interfaces on the sound speed and thermal conductivity of AMLs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetostrictive loss reduction through stress relief annealing in an FeNi-based metal amorphous nanocomposite

FeNi-based metal amorphous nanocomposite alloys are emerging soft magnetic materials with promise for high-speed motor applications. Here we demonstrate a technique to optimize magnetic properties in toroidal cores wound from strain annealed (Fe 70 Ni 30 ) 80 Nb 4 Si 2 B 14 amorphous metal ribbon (AMR). In-line strain annealing (SA) of the AMR yields a strip permeability that monotonically decreases with increasing SA tensions. After winding into toroidal cores, dramatic changes in magnetic properties are observed and determined to be of magnetostrictive origin. A procedure to re-anneal wound toroidal cores to reduce hysteresis and reverse magnetostrictive effects is developed inclusive of casting curvature effects. Here, we investigate re-annealing temperatures between 300 – 470 °C for cores produced from each SA condition. Magnetic core loss, W L , coercivity, H c , squareness ratio, K r , and permeability, µ r , are measured as a function of (stress relief) re-annealing temperature to optimally achieve W 1T,400Hz = 0.51 W/kg, H c = 2.42 A/m, K r = 0.22, and µ r = 35,300.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In situ ion irradiation of amorphous TiO 2 nanotubes

Understanding of structural and morphological evolution in nanomaterials is critical in tailoring their functionality for applications such as energy conversion and storage. Here, we examine irradiation effects on the morphology and structure of amorphous TiO 2 nanotubes in comparison with their crystalline counterpart, anatase TiO 2 nanotubes, using high-resolution transmission electron microscopy (TEM), in situ ion irradiation TEM, and molecular dynamics (MD) simulations. Anatase TiO 2 nanotubes exhibit morphological and structural stability under irradiation due to their high concentration of grain boundaries and surfaces as defect sinks. On the other hand, amorphous TiO 2 nanotubes undergo irradiation-induced crystallization, with some tubes remaining only partially crystallized. The partially crystalline tubes bend due to internal stresses associated with densification during crystallization as suggested by MD calculations. Furthermore, these results present a novel irradiation-based pathway for potentially tuning structure and morphology of energy storage materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-resolution analysis of clay minerals and amorphous materials in martian analog environments

Mudrocks and mud-sized sediments (i.e., silt to clay) dominate the surface of Earth and Mars. These fine-grained sediments preserve a rich history of sedimentary processes from source to sink and shed light on ancient climates. However, both the physical and chemical nature of these materials make them difficult to fully characterize with traditional laboratory techniques. Here, we explore a cross-disciplinary and high-resolution approach using synchrotron radiation for X-ray diffraction, pair distribution function analysis, and submicrometer-scale X-ray fluorescence, combined with transmission electron microscopy, to better understand the nanostructure and composition of mud-sized sediments from a glacio-fluvial watershed in southwest Iceland. Our results demonstrate that sediments in the cold and wet climate of Iceland are more altered than previously thought, as evidenced by the identification of kaolinite and mixed-layer kaolinite-smectite. Additionally, sediments are enriched in amorphous materials and nanocrystalline phases, as determined from grain morphologies and compositions consistent with allophane, hisingerite, ferrihydrite, and halloysite. These alteration products are present as intimate mixtures that vary across depositional sites, demonstrating the dynamic nature of the secondary assemblage from source to sink. This work has implications for Mars, where, for example, basalt-sourced sedimentary rocks from Gale crater are abundant in clay minerals and amorphous materials. Finally, this work underpins the importance of using high-resolution techniques, a coordinated methodology, and developing innovative approaches for future planetary sample return missions (e.g., Mars sample return).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Characterizing Temporal Heterogeneity by Quantifying Nanoscale Fluctuations in Amorphous Fe‐Ge Magnetic Films

Abstract Equilibrium phase transitions are influenced by fluctuations and often discussed within the framework of the Gibbs free energy, wherein the exchange of energy between system and thermal bath is stationary and all regions of the sample exhibit the same phase. Presence of spatial heterogeneity in the magnetic structures such as pinning centers, domain walls, topological defects, etc. may cause temporal heterogeneity that modifies the nature of the magnetic phase transition. This study reports that interplay of nanoscale thermodynamics with spatio‐temporal heterogeneity gives rise to complex phase transition pathways in amorphous Fe x Ge 1‐x thin films with temperature and Fe‐concentration ( x ). Coherent resonant soft X‐ray scattering experiments that have simultaneous spatial, temporal, and spectral sensitivity show that the origin of helical to paramagnetic phase transition in amorphous Fe‐Ge thin films lies in the appearance of enhanced‐fluctuation spots deep inside the ordered state. The fluctuations are heterogeneous, starting over a small fraction of the domains that increases and becomes isotropic over the entire film as the temperature increases or the Fe‐concentration decreases. The fluctuating‐fraction, when normalized to magnetization for different Fe‐concentrations, follows a single power law behavior, suggesting that the nature of the transition can be described in terms of the underlying spatio‐temporal fluctuations.

Singh, Arnab↗
DOE OSTI2023

Direct Synthesis of Ammonia from Nitrate on Amorphous Graphene with Near 100% Efficiency

Abstract Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate‐to‐ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal‐based, and metal‐free catalysts with high nitrate‐to‐ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight‐electron reduction of NO 3 − to NH 3 with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm −2 h −1 at −0.93 V versus reversible hydrogen electrode. X‐ray pair‐distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO 3 − reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on‐demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate‐polluted water and completing the NO x cycle.

Huang, Libei↗