Rhodium-Catalyzed Arene Alkenylation: Selectivity and Reaction Mechanism as a Function of In Situ Oxidant Identity
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “Aromatic Compounds”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Neptunium Pyridine Dipyrrolide Complexes
Two pyridine dipyrrolide neptunium(IV) complexes, ( Mes PDP Ph )NpCl 2 (THF) and Np( Mes PDP Ph ) 2 , where ( Mes PDP Ph ) 2– is the doubly deprotonated form of 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine, have been prepared. Characterization of the complexes has been performed through a combination of solid- and solution-state methods, including single-crystal X-ray diffraction and electronic absorption and nuclear magnetic resonance spectroscopies. Collectively, these data confirm the formation of the mono- and bis-ligated species. Electrochemistry of a series of bis-ligated actinide complexes, An( Mes PDP Ph ) 2 (An = Th, U, Np), is presented.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Change in C–H Activation Mechanism: Experimental and Computational Investigations of Rh-Catalyzed Disubstituted Benzene Functionalization
We report the ethenylation of 1,3- and 1,2-disubstituted benzenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OAc)] 2 as a catalyst precursor and Cu(OPiv) 2 as the oxidant. The regioselectivity of alkenylation for 1,3-disubstituted benzenes produces 3,5-disubstituted styrene products, while the alkenylation of 1,2-disubstituted benzenes produces 3,4- disubstituted styrene products. The rate of alkenylation is influenced by steric and electronic factors based on the substituents of the benzene unit. In all cases, 1,2-disubstituted benzenes react faster than 1,3-disubstituted benzenes, with a rate difference that is from 2 times up to >70 times more rapid for 1,2-disubstituted substrates. This is likely due to the difference in the number of accessible C−H bonds based on the steric protection of C−H bonds adjacent to functionality. Furthermore, the rate of alkenylation is influenced by the arene substituent electronics. The rates of alkenylation for 1,2-disubstituted benzenes follow the trend OMe > Me > CF 3 > Cl, while for 1,3-disubstituted benzenes the trend is CF 3 > Cl > Me > OMe. Using quantum mechanics DFT calculations, we found that the C−H activation step can occur by two different mechanisms. The electronic properties of substituents on the arene ring change the preferred C−H bond-breaking mechanism for 1,2-disubstituted and 1,3-disubstituted benzenes.
Aromatic compounds↗
Rhodium-Catalyzed Arene Alkenylation Using Benzoquinone Derivatives as Oxidants
The Rh-catalyzed conversion of olefins and arenes to alkenyl arenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OPiv)] 2 as the catalyst precursor and 12 ortho- and para-substituted benzoquinone derivatives as the in situ oxidant is reported. Included are comparative studies of the quinone derivatives for (1) rate of styrene production from benzene and ethylene, (2) Markovnikov to anti-Markovnikov selectivity for reactions of benzene and propylene, and (3) ortho/meta/para selectivity when using tert-butylbenzene as the arene. Cyclic voltammetry was utilized to measure reduction potentials for each quinone to determine any possible influence of the quinone redox potential on arene alkenylation rate and selectivity. While significant differences in selectivity are observed between ortho -quinone derivatives, such differences are minimal when para-substituted quinones are utilized. These results suggest that ortho -benzoquinone derivatives likely serve as bidentate ligands, which explains the stronger influence on catalyst activity of ortho -benzoquinone identity compared to para -benzoquinones. Although ortho -benzoquinones generally give styrene production rates faster than those of para -benzoquinones, 3,5-di- tert -butyl- ortho -benzoquinone and ortho -chloranil react with ethylene to form bicyclo[2.2.2]oct-5-ene-2,3-dione derivatives as a significant side product.
aromatic compounds↗
Access to Corrole-Appended Persubstituted Benzofurans by a Multicomponent Reaction: The Dual Role of p -Chloranil
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Potential Foldamers Based on an ortho- Terphenyl Amino Acid
We describe the synthesis and characterization of a new class of oligomers built from a terphenyl-based amino acid. Here, these oligomeric amides are of interest because the adoption of specific conformations could potentially be driven by the coordinated formation of inter-residue hydrogen bonds and aromatic interactions. Although high-resolution structural data have proven inaccessible, circular dichroism and nuclear magnetic resonance studies suggest that the new oligomers fold concomitantly with discrete self-association in chloroform. Molecular simulations find no sign of folding as a monomer, and in fact suggest that hydrogen bond patterning is anti-cooperative, inhibiting longer helices.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dual Feedstock Upcycling of α-Methylstyrene-Doped Poly(methyl methacrylate) and Biomass via the Telescope of Depolymerization and Diels–Alder Reaction
Nearly 90% of poly(methyl methacrylate) (PMMA) is not recycled and instead ends up in landfills. Conventional pyrolysis of PMMA recovers impure methyl methacrylate (MMA) with low economic value. Here, we present a telescoped dual upcycling strategy that integrates PMMA depolymerization, Diels–Alder cycloaddition, and aromatization to convert AMS-doped PMMA and biomass-derived 2,5-dimethylfuran (DMF) into 1,2,4-trimethylbenzene (pseudocumene), a valuable chemical feedstock. BBr 3 proved effective in promoting the challenging Diels–Alder reaction between MMA and DMF under high pressure of argon.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Surface Effects on Pyrene Luminescence Excitation
Pyrene is a polycyclic aromatic hydrocarbon with fluorescence in the 370-400 nm range. The optical properties of pyrene deposited on different substrates were investigated from experimental and theoretical points of view. In contrast to prior studies of surface-enhanced fluorescence, in this work all substrates were semiconductors or insulators. Experimentally, the intensity of photoluminescence (PL) and PL excitation (PLE) spectra were investigated. PLE spectra of pyrene’s monomer emission show that the intensities of the two main absorption peaks vary according to the chosen substrate. Here, calculations for pyrene on zinc sulfide (ZnS) and surface-oxidized diamond suggest that this connection arises from the alignment of the pyrene electronic levels relative to the band edges of the substrate. The absorption peak at 272 nm (4.56 eV) is shown to depend on the HOMO-1→LUMO orbital contribution while the 335 nm (3.70 eV) peak depends upon the HOMO→LUMO transition. When the HOMO-1 level falls inside the substrate valence band, as in the case of ZnS, there is significant hybridization of the molecular state with surface states that causes an enhancement of the 272 nm peak. For pyrene on diamond, however, the HOMO-1 level falls in the substrate bandgap, leading to negligible hybridization and thus no enhancement.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fine Tuning the Pore Surface in Zirconium Metal–Organic Frameworks for Selective Ethane/Ethylene Separation
Not Available
36 MATERIALS SCIENCE↗
Electrochemical Oxidation of Metal–Catechol Complexes as a New Synthesis Route to the High-Quality Ternary Photoelectrodes: A Case Study of Fe 2 TiO 5 Photoanodes
A new electrochemical, solution-based synthesis method to prepare uniform multinary oxide photoelectrodes was developed. This method involves solubilizing multiple metal ions as metal-catechol complexes in a pH condition where they are otherwise insoluble. When some of the catechol ligands are electrochemically oxidized, the remaining metal complexes become insoluble and are deposited as metal-catechol films on the working electrode. The resulting films are then annealed to form crystalline multinary oxide electrodes. Since catechol can serve as a complexing agent for a variety of metal ions, the newly developed method can be used to prepare a variety of multinary oxide films. In the present study, we used this method to prepare n-type Fe 2 TiO 5 photoanodes and investigated their photoelectrochemical properties for use in a photoelectrochemical water splitting cell. We also performed a computational investigation with two goals. The first goal was to investigate small electron polaron formation in Fe 2 TiO 5 . Charge transport in most oxide photoelectrodes involves small polaron hopping, but small polaron formation in Fe 2 TiO 5 has not been examined prior to this work. The second goal was to investigate the effect of substitutional Sn doping at the Fe site on the electronic band structure and the carrier concentration of Fe 2 TiO 5 . Here, the combined experimental and theoretical results presented in this study greatly improve our understanding of Fe 2 TiO 5 for use as a photoanode.
14 SOLAR ENERGY↗
Maximized Hole Trapping in a Polystyrene Transistor Dielectric from a Highly Branched Iminobis(aminoarene) Side Chain
We synthesized highly branched and electron donating side chain subunits and attached them to polystyrene (PS) used as a dielectric layer in a pentacene field effect transistor. The influence of these groups on dielectric function, charge retention and threshold voltage shifts (ΔV th ) depending on their positions in dielectric multilayers was determined. We compared the observations made on an N-perphenylated iminobisaniline side chain with those from the same side chains modified with ZnO nanoparticles and with an adduct formed from tetracyanoethylene (TCNE). We also synthesized an analogue in which six methoxy groups are present instead of two amine nitrogens. At 6 mol % side chain, hopping transport was sufficient to cause shorting of the gate, while at 2 mol %, charge trapping was observable as transistor threshold voltage shifts (ΔV th ). Here, we created three types of devices: with the substituted PS layer as single layer dielectric, on top of a crosslinked PS layer but in contact with the pentacene (bilayers), and sandwiched between two PS layers in trilayers. Particularly large bias stress effects and ΔV th , larger than the hexamethoxy and previously studied dimethoxy analogs, were observed in the second case and the effects increased with the increasing electron donating properties of the modified side chains. The highest ΔV th was consistent with a majority of the side chains stabilizing trapped charge. Trilayer devices showed decreased charge storage capability compared to previous work in which we used less donating side chains but in higher concentrations. The ZnO and TCNE modifications resulted in slightly more and less negative ΔV th , respectively, when the side chain polystyrene was not in contact with the pentacene and isolated from the gate electrode. The results indicate a likely maximum combination of molecular charge stabilizing activity and side chain concentration that still allows gate dielectric function.
36 MATERIALS SCIENCE↗
Tuning the Charge Transport Property and Photocatalytic Activity of Anthracene-Based 1D π–d Conjugated Coordination Polymers by Interlayer Stacking
One-dimensional (1D) π–d-conjugated coordination polymers (CCPs) with charge delocalization have attracted significant attention due to their potential application in energy conversion and storage. However, the fundamental understanding of the correlation of their structural parameters with photophysical and photocatalytic properties remains underexplored. Herein, we report three novel Cu-node anthracene-based 1D π–d CCPs with systematic variation of steric groups (Ph > Me > H) at the 9 and 10 position of anthracene (denoted as An Ph , An Me , and An H ), which is aimed at altering the stacking of the polymer chains and its impact on the inter-chain charge transport property. Here, by using the combination of steady-state X-ray absorption spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and electrochemical impedance spectroscopy, we show that the linear ligands (An Ph , An Me , and An H ) with different degrees of steric groups (Ph > Me > H) introduced at the 9 and 10 position of anthracene can alter the stacking of the polymer chains and thus impact their crystallinity, charge separation, and charge transport property, which in turn impacts their photocatalytic performance for hydrogen evolution reaction.
1-D-polymer↗
Polysiloxane Scintillators for Efficient Neutron and Gamma-Ray Pulse Shape Discrimination
Plastic scintillators based on thermoplastics, such as polystyrene and poly(vinyl toluene) (PVT), are capable of neutron and γ radiation detection via pulse shape discrimination (PSD) when overdoped with select fluorescent molecules. This class of plastic scintillator has been extensively studied but is limited to applications suitable for thermoplastics. For applications requiring flexibility, scintillators composed of elastomers, such as polysiloxanes, offer an alternative to PVT scintillators. Polysiloxane scintillators are inherently flexible and have a short processing time on the order of 3 h in air and equivalent or better detection capability at reduced doping concentration (<5 wt %). This work presents polysiloxane-based scintillators, containing only 1–5 wt % of 2,5 diphenyl-oxazole (PPO) or 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) as primary dopants and 9,9-dimethyl-2,7-distyryl-9H-fluorene (SFS) as a wavelength shifter. A 5 wt % PPO polysiloxane sample had improved neutron and gamma ray PSD and comparable light yield than EJ-299-33 tested under the same conditions, i.e., figure of merit (FoM) of 1.33 ± 0.03 at 450 keV ee and light yield of 94% relative to EJ-299-33. The 5 wt % PhF-polysiloxane sample had a higher light yield, 144% of EJ-299-33 but lower FoM under the same conditions (FoM of 1.09 ± 0.03). Furthermore, this work highlights the potential of polysiloxanes as a matrix for PSD capable plastic scintillators.
36 MATERIALS SCIENCE↗
Synthesis of High-Performance Lignin-Based Inverse Thermoplastic Vulcanizates with Tailored Morphology and Properties
In this work, we report synthesis of a high-strength renewable phenolic composition with linear large deformation strain without a thermoplastic-like yielding while retaining thermal processability. Small molecule carboxylic acid derivatives with varying molecular architectures act as esterifying crosslinkers in an equal mass mixture of lignin and acrylonitrile–butadiene copolymers in a highly scalable, solvent-free process. These “inverse thermoplastic vulcanizates” (iTPVs)—unique in their approach of crosslinking the rigid lignin phase rather than the soft phase—exhibit ordered self-assembly, tunable nanoscale morphology, and processability. The first of its kind iTPV compositions exhibit engineering stress–strain curves with two- to sixfold linear extensibility, a twofold rise in strength, and an order of magnitude enhanced modulus compared to a simple lignin-rubber blend. Viscoelastic properties correlate well with crosslinker architecture and the resulting morphology, allowing competing properties of toughness and stiffness to be tuned. This research finds a path for identifying the potential of lignin as a sustainable feedstock.
36 MATERIALS SCIENCE↗
Effect of Diphenyl Content on Viscoelasticity of Poly(dimethyl- co -diphenyl)siloxane Melt and Network
Polydimethylsiloxane (PDMS) is one of the most widely used polymeric materials for sealants, adhesives, lubricants, and thermal as well as electrical insulation. At low temperatures, however, PDMS is subject to crystallization that can cause deterioration in mechanical function. A common way to suppress such crystallization is through the incorporation of phenylsiloxane into the backbone of polysiloxane. Nevertheless, the introduction of phenyl components, even in small quantities, could potentially change the properties of the siloxane in a significant way. In this work, a series of mechanical tests and finite element simulations were performed to study the macroscale viscoelasticity of two poly(dimethyl-co-diphenyl)siloxane formulations in order to understand the effects of a few percent diphenyl contents on the viscoelasticity of the polysiloxane material. Here, we utilized the small-angle X-ray scattering to investigate the microscopic structures of the copolymers and broadband dielectric spectroscopy and rheology to probe the chain dynamics at the microscale. The results of these characterizations were used to inform the finite element simulations. We found that the degree of cross-linking does not significantly alter the microstructure but can profoundly affect the viscoelastic response of the copolymer networks. The corresponding hysteretic behavior is interpreted in terms of reptation-like motion and relaxation of the effective free chains in the cured polymer network. The relaxation of the copolymer chains is slowed significantly by even a small increase in the molar ratio of the diphenyl component.
36 MATERIALS SCIENCE↗
The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface
The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.
Shangguan, Junnan↗
Enhanced Oxygen Activation Achieved by Robust Single Chromium Atom-Derived Catalysts in Aerobic Oxidative Desulfurization
Oxidative desulfurization (ODS) plays critical roles in the production of high-quality sulfur impurity-free fuels, especially procedures using molecular oxygen as the sole oxidant. However, the state-of-the-art systems still rely on noble metal nanocatalysts, with deactivation issues caused by coking and sintering still present. In this work, leveraging the merits of single-atom catalysts (SACs) with earth-abundant metal cores and robust nanoporous supports, a series of catalysts composed of homogeneously distributed single chromium atoms anchored on multiwalled carbon nanotubes were fabricated and deployed to catalyze the aerobic ODS transformation. Adopting aromatic sulfur compound (ASC)-containing alkanes as a model system with molecular oxygen as the oxidant, efficient oxygen-to-active O 2 •– transformation and subsequent ASCs-to-sulfone conversion have been achieved, with the former benefiting from the chromium-active sites and the latter arising from the robust, nanoporous, and π-conjugated architecture of the supports. The attractive catalytic performance and cycling stability of the chromium-based SACs make them promising candidates in practical sulfur species removal from liquid fuels, supplying an alternative guidance on the catalyst design toward cost-effective and energy-efficient ODS procedures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Enhanced Activity from Coordinatively Unsaturated and Dynamic Zeolite-Bound Organoscandium Species
Scandium borohydride grafted into the micropores of the faujasite zeolite HY30 catalyzes the C–H borylation of benzene, whereas silica-grafted species are inactive. This catalytic activity may originate from grafting at a Brønsted acid site leading to a more electron-deficient rare earth center. Herein, we apply multinuclear double-resonance nuclear magnetic resonance (NMR) experiments to probe the structure and dynamics of zeolite- and silica-bound scandium borohydride complexes. The experiments reveal that scandium centers located within the zeolite micropores, in proximity to Al-created Brønsted sites, are more dynamic than rigid scandium sites grafted on silanols. Through a combination of NMR and molecular dynamics simulations, we show that the coordination of the scandium in the zeolite is labile, with the metal exchanging between two binding sites. As a result, the weak electron donation from the support that enables the movement of the Sc center leads to the formation of an undercoordinated metal center that cannot exist on silica, ultimately leading to the new catalytic activity of the species.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗