Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Structural tunability and origin of two-level systems in amorphous silicon

Amorphous silicon films prepared by electron-beam evaporation have systematically and substantially greater atomic density for higher thickness, higher growth temperature, and slower deposition rate, reaching the density of crystalline Si when films of thickness greater than ~300 nm are grown at 425 °C and at <1 Å/s. Here, a combination of spectroscopic techniques provide insight into atomic disorder, local strains, dangling bonds, and nanovoids. Electron diffraction shows that the short-range order of the amorphous silicon is similar at all growth temperatures, but fluctuation electron microscopy shows that films grown above room temperature show a form of medium-range order not previously observed in amorphous silicon. Atomic disorder and local strain obtained from Raman spectroscopy are reduced with increasing growth temperature and show a nonmonotonic dependence on thickness. Dangling bond density decreases with increasing growth temperature and is only mildly dependent on thickness. Positron annihilation Doppler broadening spectroscopy and electron energy loss spectroscopy show that nanovoids, and not density variations within the network, are responsible for reduced atomic density. Specific heat and mechanical loss measurements, which quantify the density of tunneling two-level systems, in combination with the structural data, suggest that two-level systems in amorphous silicon films are associated with nanovoids and their surroundings, which are in essence loosely bonded regions where atoms are less constrained.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic-Scale Structure of Chemically Distinct Surface Oxygens in Redox Reactions

During redox reactions, oxide-supported catalytic systems undergo structural and chemical changes. Improving subsequent catalytic properties requires an understanding of the atomic-scale structure with chemical state specificity under reaction conditions. For the case of 1/2 monolayer vanadia on α-TiO 2 (110), we use X-ray standing wave (XSW) excited X-ray photoelectron spectroscopy to follow the redox induced atomic positional and chemical state changes of this interface. Furthermore, while the resulting XSW 3D composite atomic maps include the Ti and O substrate atoms and V surface atoms, our focus in this report is on the previously unseen surface oxygen species with comparison to density functional theory predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

New correlated numerical methods for attosecond molecular single and double ionization

This project resulted in the development of ASTRA, a new molecular ionization code capable of describing single and double ionization processes in polyatomic molecules with correlated electrons and time-dependent fields. Key achievements include: (i) the development of the PRISM hybrid-integral library enabling core-ionization and high-angular-momentum convergence; (ii) implementation of time-dependent Schrödinger equation solvers for pump–probe spectroscopies; (iii) validation against experimental and theoretical benchmarks for atoms and molecules; and (iv) extension to two-photon double ionization using the finite-pulse virtual-sequential model. These developments establish ASTRA as a versatile platform for attosecond molecular dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

X-ray induced electron and ion fragmentation dynamics in IBr

Characterization of the inner-shell decay processes in molecules containing heavy elements is key to understanding x-ray damage of molecules and materials and for medical applications with Auger-electron-emitting radionuclides. The 1s hole states of heavy atoms can be produced by absorption of tunable x rays and the resulting vacancy decays characterized by recording emitted photons, electrons, and ions. The 1s hole states in heavy elements have large x-ray fluorescence yields that transfer the hole to intermediate electron shells that then decay by sequential Auger-electron transitions that increase the ion’s charge state until the final state is reached. In molecules, the charge is spread across the atomic sites, resulting in dissociation to energetic atomic ions. We have used x-ray/ion coincidence spectroscopy to measure charge states and energies of Iq+ and Brq′+ atomic ions following 1s ionization at the I and Br K-edges of IBr. We present the charge states and kinetic energies of the two correlated fragment ions associated with core-excited states produced during the various steps of the cascades. Here, to understand the dynamics leading to the ion data, we develop a computational model that combines Monte-Carlo/Molecular-Dynamics (MC/MD) simulations with a classical over-the-barrier model to track inner-shell cascades and redistribution of electrons in valence orbitals and nuclear motion of fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Smooth trends in fermium charge radii and the impact of shell effects

The quantum-mechanical nuclear-shell structure determines the stability and limits of the existence of the heaviest nuclides with large proton numbers Z ≳ 100. Shell effects also affect the sizes and shapes of atomic nuclei, as shown by laser spectroscopy studies in lighter nuclides. However, experimental information on the charge radii and the nuclear moments of the heavy actinide elements, which link the heaviest naturally abundant nuclides with artificially produced superheavy elements, is sparse. Here we present laser spectroscopy measurements along the fermium (Z = 100) isotopic chain and an extension of data in the nobelium isotopic chain (Z = 102) across a key region. Multiple production schemes and different advanced techniques were applied to determine the isotope shifts in atomic transitions, from which changes in the nuclear mean-square charge radii were extracted. A range of nuclear models based on energy density functionals reproduce well the observed smooth evolution of the nuclear size. Both the remarkable consistency of model prediction and the similarity of predictions for different isotopes suggest a transition to a regime in which shell effects have a diminished effect on the size compared with lighter nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Studies of Autoionizing States relevant to Dielectronic Recombinaton

Doubly excited autoionizing states of alkaline earth atoms are explored by multistep laser spectroscopy, which is precisely the inverse process to dielectronic recombination, the recombination of hot electron with ions via an autoionizing state. Dielectronic recombination is an important mechanism leading to power loss in high temperature plasmas. Measurements included the autoionization rates of atoms in zero field and in the presence of electric and magnetic fields, as might be encountered in a plasma. To mimic the effects of the rapidly varying fields of electron collisions measurements were made in the presence of microwave electric fields. These experiments are analogous to experiments conducted with combined high intensity infrared and vuv laser fields, In laser/microwave experiments the effects of laser pulse envelope timing relative to the microwave phase were explored extensively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Infrared spectroscopy of RG–Co + (H 2 O) complexes (RG = Ar, Ne, He): The role of rare gas “tag” atoms

RG n –Co + (H 2 O) cation complexes (RG = Ar, Ne, He) are generated in a supersonic expansion by pulsed laser vaporization. Here, complexes are mass-selected using a time-of-flight spectrometer and studied with infrared laser photodissociation spectroscopy, measuring the respective mass channels corresponding to the elimination of the rare gas “tag” atom. Spectral patterns and theory indicate that the structures of the ions with a single rare gas atom have this bound to the cobalt cation opposite the water moiety in a near-C 2v arrangement. The O–H stretch vibrations of the complex are shifted compared to those of water because of the metal cation charge-transfer interaction; these frequencies also vary systematically with the rare gas atom attached. The efficiencies of photodissociation also vary with the rare gas atoms because of their widely different binding energies to the cobalt cation. The spectrum of the argon complex could only be measured when at least three argon atoms were attached. In the case of the helium complex, the low binding energy allows the spectra to be measured for the low-frequency H–O–H scissors bending mode and for the O–D stretches of the deuterated analog. The partially resolved rotational structure for the antisymmetric O–H and O–D stretches reveals the temperature of these complexes (6 K) and establishes the electronic ground state. The helium complex has the same 3 B 1 ground state as the tag-free complex studied previously by Metz and co-workers (2013), but the A rotational constant is contaminated by vibrational averaging from the bending motion of the helium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectral Signatures of Ultrafast Excited-State Intramolecular Proton Transfer from Computational Multi-edge Transient X-ray Absorption Spectroscopy

Excited state intramolecular proton transfer (ESIPT) is a fundamental chemical process with several applications. Ultrafast ESIPT involves coupled electronic and atomic motions and has been primarily studied using femtosecond optical spectroscopy. X-ray spectroscopy is particularly useful because it is element-specic and enables direct, individual probes of the proton donating and accepting atoms. Here, we report a computational study to resolve the ESIPT in 10-Hydroxybenzo[h]quinoline (HBQ), an intramolecularly hydrogen bonded compound, using time-dependent density functional theory combined with ab initio molecular dynamics (AIMD) and time-resolved X-ray absorption spectroscopy (XAS) computations to track the ultrafast excited-state dynamics. Overall, our results reveal clear X-ray spectral signatures of coupled electronic and atomic motions during and following ESIPT at the oxygen and nitrogen K-edge paving the way for future experiments at X-ray free electron lasers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Methanol Partial Oxidation on Cu(111) and PtCu(111) Single-Atom Alloy Surfaces: Effect of Surface Oxygen Coverage on Selectivity

The selective oxidation of methanol to formaldehyde on Cu surfaces is an important and well-studied reaction. However, a systematic analysis of product selectivity as a function of oxygen coverage on Cu(111) and Cu-based single-atom alloys (SAAs) has not been previously reported. In this work, we present a comprehensive investigation of deuterated methanol (CD 3 OH) partial oxidation on Cu(111) and 1% PtCu(111) SAA surfaces as a function of preadsorbed oxygen coverage. Temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) reveal that isolated Pt atoms inhibit the initial surface oxidation of Cu(111) under low oxygen exposures. Despite this difference in oxidation kinetics, the product selectivity remains largely unaffected: on both Cu(111) and PtCu(111), formaldehyde (CD 2 O) is the predominant partial oxidation product over a broad range of oxygen coverages. The selectivity toward formaldehyde peaks at intermediate oxygen coverages (∼0.3 monolayers, ML), indicating the existence of an optimal oxygen loading for partial oxidation. Notably, the similar product selectivities on Cu(111) and PtCu(111) over a range of surface oxygen coverage indicate that Pt single atoms do not significantly alter the reaction pathway or shift the optimal oxygen coverage for formaldehyde formation. Control experiments confirm that Cu(111) is unreactive toward methanol in the absence of oxygen, while PtCu(111) surfaces produce a small amount of formaldehyde even when oxygen is not preadsorbed, indicating that isolated Pt atoms facilitate O−H activation at below 150 K, leading to H 2 desorption, followed by C−D activation at higher temperatures (∼350 K). Density functional theory (DFT)-based calculations show that Pt atoms increase the O 2 dissociation barrier relative to Cu(111), consistent with the observed inhibition of oxidation at low exposures. Overall, this work provides the first detailed selectivity map for methanol oxidation on oxidized Cu(111) and PtCu(111) SAA surfaces. By linking classical mechanistic insights such as methoxy- and formate-mediated pathways with single-atom alloy catalyst design, this work demonstrates that while Pt substitution modulates the oxidation kinetics and oxygen binding, the overall selectivity toward formaldehyde is governed primarily by oxygen coverage. These findings underscore the potential of isolated dopants to tune surface oxidation behavior without compromising the intrinsic partial oxidation selectivity of copper-based catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Monomeric Alanediyl : AlAr i Pr8 (Ar i Pr8 = C 6 H-2,6-(C 6 H 2 -2,4,6-Pr i 3 ) 2 -3,5-Pr i 2 ): An Organoaluminum(I) Compound with a One-Coordinate Aluminum Atom

Reduction of the aluminum iodide AlI 2 Ar i Pr8 ( 1 ; Ar i Pr8 = C 6 H-2,6-(C 6 H 2 -2,4,6-Pr i 3 ) 2 -3,5-Pr i 2 ) with 5% w/w Na/NaCl in hexanes gave a dark red solution from which the monomeric alanediyl : AlAr i Pr8 ( 2 ) was isolated in ca. 28% yield as yellow-orange crystals. Compounds 1 and 2 were characterized by X-ray crystallography, electronic and NMR spectroscopy, and theoretical calculations. The Al atom in 2 is one-coordinate, and the compound displays two absorptions in its electronic spectrum at 354 and 455 nm. It reacts with H 2 under ambient conditions to give the aluminum hydride {AlH(μ-H)Ar i Pr8 } 2 , probably via a weakly bound dimer of 2 as an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Catalytic CO Oxidation on MgAl 2 O 4 -Supported Iridium Single Atoms: Ligand Configuration and Site Geometry

Probing and understanding the local chemical environment of an active site is essential for designing high-performance single-atom catalysts (SACs). Density functional theory (DFT) calculations were performed to investigate the ligand configuration and site geometry of MgAl 2 O 4 -supported iridium single atoms (Ir-1) toward catalytic carbon monoxide (CO) oxidation. We employed MgAl 2 O 4 (111) and MgAl 2 O 4 (211) as the model substrates with adsorbed Ir single atoms of different site geometries. DFT calculations revealed that the Mg-site on MgAl 2 O 4 (111) and the step site on MgAl 2 O 4 (211) are the most stable adsorption sites for Ir single atoms. Irrespective of site choices, CO oxidation on supported Ir single atoms follows the Eley-Rideal (E-R) mechanism, in which the surface oxygen vacancies close to the Ir single atoms activate molecular O 2 with a negligible barrier and the rate-limiting step is the gas-phase CO directly attacking the O-Ir species that is modulated by a CO ligand. Furthermore, first-principles X-ray absorption near-edge spectra of reaction intermediates along with in situ/operando X-ray absorption spectroscopy (XAS) suggest that Ir single atoms adsorb primarily on the step sites of MgAl 2 O 4 . However, microkinetic modeling predicts that a higher activity can be attained on the equally stable Mg-site, maximizing the population of which in catalyst synthesis might prove fruitful in future studies. Electronic structure analysis indicates that the CO ligand increases the reactivity of adsorbed oxygen atoms bound to Ir single atoms by increasing the antibonding nature of the O-Ir bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of electrical field on the susceptibility of gallium nitride transistors to proton irradiation

Radiation susceptibility of electronic devices is commonly studied as a function of radiation energetics and device physics. Often overlooked is the presence or magnitude of the electrical field, which we hypothesize to play an influential role in low energy radiation. Accordingly, we present a comprehensive study of low-energy proton irradiation on gallium nitride high electron mobility transistors (HEMTs), turning the transistor ON or OFF during irradiation. Commercially available GaN HEMTs were exposed to 300 keV proton irradiation at fluences varying from 3.76 × 10 12 to 3.76 × 10 14 cm 2 , and the electrical performance was evaluated in terms of forward saturation current, transconductance, and threshold voltage. The results demonstrate that the presence of an electrical field makes it more susceptible to proton irradiation. The decrease of 12.4% in forward saturation and 19% in transconductance at the lowest fluence in ON mode suggests that both carrier density and mobility are reduced after irradiation. Additionally, a positive shift in threshold voltage (0.32 V and 0.09 V in ON and OFF mode, respectively) indicates the generation of acceptor-like traps due to proton bombardment. high-resolution transmission electron microscopy and energy dispersive x-ray spectroscopy analysis reveal significant defects introduction and atom intermixing near AlGaN/GaN interfaces and within the GaN layer after the highest irradiation dose employed in this study. According to in-situ Raman spectroscopy, defects caused by irradiation can lead to a rise in self-heating and a considerable increase in (∼750 times) thermoelastic stress in the GaN layer during device operation. The findings indicate device engineering or electrical biasing protocol must be employed to compensate for radiation-induced defects formed during proton irradiation to improve device durability and reliability.

gallium nitride↗
DOE OSTI2020

Lifetime-Limited Interrogation of Two Independent 27 Al + Clocks Using Correlation Spectroscopy

Laser decoherence limits the stability of optical clocks by broadening the observable resonance linewidths and adding noise during the dead time between clock probes. Correlation spectroscopy avoids these limitations by measuring correlated atomic transitions between two ensembles, which provides a frequency difference measurement independent of laser noise. Here, we apply this technique to perform stability measurements between two independent clocks based on the 1 S 0 ↔ 3 P 0 transition in 27 Al + . By stabilizing the dominant sources of differential phase noise between the two clocks, we observe coherence between them during synchronous Ramsey interrogations as long as 8 s at a frequency of 1.12 × 10 15 Hz. Here, the observed contrast in the correlation spectroscopy signal is consistent with the 20.6 s 3 P 0 state lifetime and represents a measurement instability of (1.8 ± 0.5) × 10 –16 /√τ/s for averaging periods longer than the probe duration when dead time is negligible.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Mechanistic and Electronic Insights into a Working NiAu Single-Atom Alloy Ethanol Dehydrogenation Catalyst

Elucidation of reaction mechanisms and the geometric and electronic structure of the active sites themselves is a challenging, yet essential task in the design of new heterogeneous catalysts. Such investigations are best implemented via a multi-pronged approach that comprises ambient pressure catalysis, surface science, and theory. Herein, we employ this strategy to understand the workings of NiAu single-atom alloy (SAA) catalysts for the selective non-oxidative dehydrogenation of ethanol to acetaldehyde and hydrogen. The atomic dispersion of Ni is paramount for selective ethanol to acetaldehyde conversion, and we show that even the presence of small Ni ensembles in the Au surface results in the formation of undesirable byproducts via C-C scission. Spectroscopic, kinetic, and theoretical investigations of the reaction mechanism reveal that both C-H and O-H bond cleavage steps are kinetically relevant and single Ni atoms are confirmed as the active sites. X-ray absorption spectroscopy studies allow us to follow the charge of the Ni atoms in the Au host before, under, and after a reaction cycle. Specifically, in the pristine state the Ni atoms carry a partial positive charge which increases upon coordination to the electronegative oxygen in ethanol and decreases upon desorption. Furthermore, this type of oxidation state cycling during reaction is similar to the behavior of single-site homogenous catalysts. Given the unique electronic structure of many single-site catalysts, such a combined approach in which the atomic-scale catalyst structure and charge state of the single atom dopant can be monitored as a function of its reactive environment is a key step towards developing structure function relationships that inform the design of new catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)

We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2026

Microfibril orientation and compositional heterogeneity in fiber and vessel cell walls of poplar xylem studied by AFM-IR and SFG spectroscopy

Understanding the structural organization of cellulose microfibrils (CMFs) within individual plant cell walls is essential for connecting cell wall architecture to its mechanical and physiological functions. However, due to the complex hierarchical structure and nanoscale heterogeneity of cell walls, it remains technically challenging to resolve detailed compositional and orientational information at subcellular levels of individual cell walls. This study investigates the internal 3D structure, chemical composition, and sublayer organization of fiber and vessel cell walls in the xylem tissue of a two-year-old field-grown hybrid poplar tree (Populus alba × P. glandulosa) using photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) and sum frequency generation (SFG) hyperspectral microscopy. AFM-IR provided nanoscale chemical imaging, revealing localized compositional heterogeneity, including variations between adjacent cell walls and transitional layers beyond the traditional S1, S2, and S3 sublayers. SFG microscopy revealed that CMFs in fiber walls are highly aligned along the stem axis, consistent with their role in mechanical support, while vessel cell walls exhibited slightly tilted CMFs, reflecting their function in hydraulic transport. Together, these results offer new insights into cell-type-specific CMF organization and compositional gradients in hybrid poplar xylem. These findings highlight the structural and chemical complexity of secondary cell walls in woody plants and demonstrate the value of AFM-IR and SFG spectroscopy in elucidating plant cell wall architecture.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Controllable Formation of Threefold-Coordinated Oxygen in Graphene by Low-Energy Ion Implantation

The atomically precise engineering of impurities in graphene and the understanding of their structural and carrier-dependent electronic properties at the nanoscale are crucial for advancing graphene-based nanoelectronics, catalysis, and energy technologies. Here, we demonstrate controllable incorporation of the elusive 3-fold-coordinated O substitutions into graphene using low-energy O + ion implantation under ultrahigh-vacuum conditions. By combining high-resolution scanning tunneling microscopy and spectroscopy (STM/S), bond-resolved noncontact atomic force microscopy techniques, and density functional theory (DFT) calculations, we resolve both the structural and electronic properties of the O-related defects. The STM/S measurements, corroborated by DFT calculations, uncover a characteristic impurity state that is energetically pinned to the Dirac point across different charge-carrier doping regimes. Molecular dynamics simulations further reveal the distribution of implantation-induced configurations and identify the formation of 3-fold-coordinated O dopants. Furthermore, this work provides a viable route to incorporate 3-fold-coordinated O dopants and opens new opportunities for controlled defect engineering in graphene.

3-fold-coordinated oxygen↗
DOE OSTI2025

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗