Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER - EFFECT OF COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Boundary layer receptivity due to three-dimensional convected gusts

Compressible fully three-dimensional interactions involving convected free-stream disturbances are analyzed by utilizing a rapid distortion theory in conjunction with triple-deck concepts. Only one class of regions where the boundary layer is receptive is considered; these regions are downstream from the leading edge, where a local feature, such as a wall hump, forces the boundary layer to make a short-scale adjustment. The results obtained are applicable to a variety of situations such as receptivity due to shallow three-dimensional roughness elements or three-dimensional wall-suction distributions. The influence of the gust orientation, frequency, and the type of mean flow disturbance on the amplitudes of the generated instability waves is demonstrated. It is found that a three-dimensional instability wave can be generated by the interaction of an oblique gust with a two-dimensional mean flow disturbance.

Choudhari, Meelan↗
NASA NTRS1945

Flight Investigation of Boundary-layer and Profile-drag Characteristics of Smooth Wing Sections of a P-47D Airplane

In Mach range of 0.25 - 0.69, boundary-layer measurements were made on upper wing surface at 25% semi-span, pressure-distribution measurements made on upper surface at 63% semi-span, and wake surveys made at 63% semi-span. The minimum profile-drag coefficient of 0.0062 was indicated for smooth section at 63% semi-span. Critical mach number was exceeded by 0.04, but no compressibility shocks appeared. In slipstream, boundary layer transition occurred as far back as 20% chord on upper surface at low lift coefficients.

PRESSURE DISTRIBUTION - WINGS - REPUBLIC P-47D↗
NASA NTRS1987

Supersonic turbulent flow past a 3-D swept compression corner at Mach 3

Experimental and theoretical studies are presented on the three-dimensional shock wave-turbulent boundary layer interaction generated by a swept compression corner at Mach 3 for compression angle of 24 deg, sweep angle of 60 deg, and Reynolds numbers from 140,000 to 900,000. Two theoretical approaches were used, both of which utilize the full mass-averaged compressible three-dimensional Navier-Stokes equations but differ in the choice of turbulence model (the Baldwin-Lomax, 1978, and the Jones-Launder, 1972, model, respectively). The features of the computed mean flow structure were found to be qualitatively the same for both the Baldwin-Lomax and Jones-Launder models.

Knight, Doyle D.↗
NASA NTRS1976

Boundary layer bleed system study for a full-scale, mixed-compression inlet with 45 percent internal contraction

The results of an experimental bleed development study for a full-scale, Mach 2.5, axisymmetric, mixed-compression inlet were presented. The inlet was designed to satisfy the airflow requirements of the TF30-P-3 turbofan engine. Capabilities for porous bleed on the cowl surface and ram-scoop/flush-slot bleed on the centerbody were provided. A configuration with no bleed on the cowl achieved a minimum stable, diffuser exit, total pressure recovery of 0.894 with a centerbody-bleed mass flow ratio of 0.02. Configurations with cowl bleed had minimum stable recoveries as high as 0.900 but suffered range decrement penalties from the increased bleed mass flow removal. Limited inlet stability and unstart angle-of-attack data are presented.

Shaw, R. J.↗
NASA NTRS1989

Group-kinetic theory and modeling of atmospheric turbulence

A group kinetic method is developed for analyzing eddy transport properties and relaxation to equilibrium. The purpose is to derive the spectral structure of turbulence in incompressible and compressible media. Of particular interest are: direct and inverse cascade, boundary layer turbulence, Rossby wave turbulence, two phase turbulence; compressible turbulence, and soliton turbulence. Soliton turbulence can be found in large scale turbulence, turbulence connected with surface gravity waves and nonlinear propagation of acoustical and optical waves. By letting the pressure gradient represent the elementary interaction among fluid elements and by raising the Navier-Stokes equation to higher dimensionality, the master equation was obtained for the description of the microdynamical state of turbulence.

Tchen, C. M.↗
NASA NTRS1994

Turbulence models and Reynolds analogy for two-dimensional supersonic compression ramp flow

Results of the application of turbulence models and the Reynolds analogy to the Navier-Stokes computations of Mach 2.9 two-dimensional compression ramp flows are presented. The Baldwin-Lomax eddy viscosity model and the kappa-epsilon turbulence transport equations for the turbulent momentum flux modeling in the Navier-Stokes equations are studied. The Reynolds analogy for the turbulent heat flux modeling in the energy equation was also studied. The Navier-Stokes equations and the energy equation were numerically solved for the flow properties. The Reynolds shear stress, the skin friction factor, and the surface heat transfer rate were calculated and compared with their measurements. It was concluded that with a hybrid kappa-epsilon turbulence model for turbulence modeling, the present computations predicted the skin friction factors of the 8 deg and 16 deg compression ramp flows and with the turbulent Prandtl number Pr(sub t) = 0.93 and the ratio of the turbulent thermal and momentum transport coefficients mu(sub q)/mu(sub t) = 2/Prt, the present computations also predicted the surface heat transfer rates beneath the boundary layer flow of the 16 compression ramp.

Wang, Chi R.↗
NASA NTRS1997

Airfoil Design Using a Coupled Euler and Integral Boundary Layer Method with Adjoint Based Sensitivities

The objective of this paper is to present a control theory approach for the design of airfoils in the presence of viscous compressible flows. A coupled system of the integral boundary layer and the Euler equations is solved to provide rapid flow simulations. An adjunct approach consistent with the complete coupled state equations is employed to obtain the sensitivities needed to drive a numerical optimization algorithm. Design to target pressure distribution is demonstrated on an RAE 2822 airfoil at transonic speed.

Edwards, S.↗
NASA NTRS1988

A transonic interactive boundary-layer theory for laminar and turbulent flow over swept wings

A 3-D laminar and turbulent boundary-layer method is developed for compressible flow over swept wings. The governing equations and curvature terms are derived in detail for a nonorthogonal, curvilinear coordinate system. Reynolds shear-stress terms are modeled by the Cebeci-Smith eddy-viscosity formulation. The governing equations are descretized using the second-order accurate, predictor-corrector finite-difference technique of Matsuno, which has the advantage that the crossflow difference formulas are formed independent of the sign of the crossflow velocity component. The method is coupled with a full potential wing/body inviscid code (FLO-30) and the inviscid-viscous interaction is performed by updating the original wing surface with the viscous displacement surface calculated by the boundary-layer code. The number of these global iterations ranged from five to twelve depending on Mach number, sweep angle, and angle of attack. Several test cases are computed by this method and the results are compared with another inviscid-viscous interaction method (TAWFIVE) and with experimental data.

Woodson, Shawn H.↗
NASA NTRS1991

Heat transfer, velocity-temperature correlation, and turbulent shear stress from Navier-Stokes computations of shock wave/turbulent boundary layer interaction flows

The properties of 2-D shock wave/turbulent boundary layer interaction flows were calculated by using a compressible turbulent Navier-Stokes numerical computational code. Interaction flows caused by oblique shock wave impingement on the turbulent boundary layer flow were considered. The oblique shock waves were induced with shock generators at angles of attack less than 10 degs in supersonic flows. The surface temperatures were kept at near-adiabatic (ratio of wall static temperature to free stream total temperature) and cold wall (ratio of wall static temperature to free stream total temperature) conditions. The computational results were studied for the surface heat transfer, velocity temperature correlation, and turbulent shear stress in the interaction flow fields. Comparisons of the computational results with existing measurements indicated that (1) the surface heat transfer rates and surface pressures could be correlated with Holden's relationship, (2) the mean flow streamwise velocity components and static temperatures could be correlated with Crocco's relationship if flow separation did not occur, and (3) the Baldwin-Lomax turbulence model should be modified for turbulent shear stress computations in the interaction flows.

Wang, C. R.↗
NASA NTRS1977

Instability of a compressible circular free jet with consideration of the influence of the jet boundary layer thickness

The instability of a circular jet was investigated by means of the inviscid linearized stability theory. By variation of a jet parameter which takes the ratio of jet radius to boundary layer thickness into account, the influence of axisymmetry on the spatial growth rate and disturbance phase velocity is studied. The influence of Mach number and temperature ratio is discussed. A comparison with measurements shows that the instability of a turbulent jet boundary layer may also be explained by these results.

Michalke, A.↗
NASA NTRS1988

Stability and transition in supersonic boundary layers

The three-dimensional time-dependent, compressible Navier-Stokes equations are numerically solved by a Fourier-Chebyshev collocation algorithm to study the stability of a Mach 4.5 flow over a flat plate. Several nonlinear direct simulations suggest the existence of a secondary instability which might provide a possible route to transition. Pertinent differences in the energy content of the various Fourier modes between this instability and the more common incompressible K-type instabilities are pointed out.

Erlebacher, Gordon↗
DOE OSTI2025

On High-Order/Low-Order and Micro-Macro Methods for Implicit Time-Stepping of the BGK Model

In this paper, a high-order/low-order (HOLO) method is combined with a micro-macro (MM) decomposition to accelerate iterative solvers in fully implicit time-stepping of the Bhatnagar–Gross–Krook (BGK) equation for gas dynamics. The MM formulation represents a kinetic distribution as the sum of a local Maxwellian and a perturbation. In highly collisional regimes, the perturbation away from initial and boundary layers is small and can be compressed to reduce the overall storage cost of the distribution. The convergence behavior of the MM methods, the usual HOLO method, and the standard source iteration method is analyzed on a linear BGK model. Both the HOLO and MM methods are implemented using a discontinuous Galerkin (DG) discretization in phase space, which naturally preserves the consistency between high- and low-order models required by the HOLO approach. Furthermore, the accuracy and performance of these methods are compared on the Sod shock tube problem and a sudden wall heating boundary layer problem. Overall, the results demonstrate the robustness of the MM and HOLO approaches and illustrate the compression benefits enabled by the MM formulation when the kinetic distribution is near equilibrium.

BGK model↗
NASA NTRS1989

A zonal approach to V/STOL vehicle aerodynamics

A zonal method based on an iterative coupling between an inviscid panel method and two viscous finite difference methods is applied to solve for the region of jets issued from generic V/STOL models in order to assess the influence of the jet upon V/STOL configurations. The low-order panel method, VSAERO, is used to solve for the entire flow region, which includes the V/STOL model and jet boundary. ARC3D, a well known compressible, thin layer Navier-Stokes (NS) code developed at NASA-Ames, and APPL, a parabolized NS code, are used to solve for the jet region subject to the boundary condition provided by the VSAERO calculation. Overlapping boundaries are used for the purpose of coupling. Results are presented with the available experimental data for the jet and V/STOL configurations.

Yoo, Sungyul↗
DOE OSTI2025

High-Fidelity Simulations of a Mach 9 Shock-Turbulent Boundary Layer Interaction

High-fidelity large-eddy simulations (LES) and wall-modeled large-eddy simulations (WMLES) are performed on the interaction of a Mach 9 turbulent boundary layer with a 34-degree compression ramp. Our primary interest is the sensitivity of mean and unsteady wall quantities to grid density. Additionally within the context of WMLES, we seek to explore solution sensitivity to the wall-model exchange location.

42 ENGINEERING↗
NASA NTRS1974

Rocket engine thrust chamber heat transfer calculation and analysis

A parametric study of the heat transfer rate along the wall of a rocket nozzle is presented. The influences of different parameters; laminar and turbulent Lewis number, mixture ratio, initial wall temperature distribution, and eddy viscosity, were considered. The numerical evaluation of these influences on heat transfer rate was done by using three different compressible, reacting laminar and turbulent boundary layer computer programs; MABL (Mass Addition Boundary Layer Program), MABL-KE (MABL program is modified to include turbulent kinetic energy equation), and BLIMP (Boundary Layer Integral Matrix Procedure). This study also provided an excellent opportunity to evaluate the efficiencies of these three computer programs and to suggest one of them for future computational purposes.

Saha, H.↗
NASA NTRS1990

Instability and transition; Proceedings of the Workshop, Hampton, VA, May 15-June 9, 1989. Vols. 1 & 2

The proceedings of the workshop on instability and transition, sponsored by the Institute for Computer Applications in Science and Engineering and the Langley Research Center, during May-June 1989 are presented. The proceedings contain panel discussions and the research papers resulting from the collaborative projects started during the workshop and completed shortly thereafter. Six panels are represented: theory, low-speed experiment, high-speed experiment, computation, receptivity, and roughness panels. Focus is concentrated on receptivity, advanced asymptotics, boundary-layer stability, free shear flows, compressible stability and transition, transition simulation, and transition modeling. The panel summaries and the position papers by the panelists as well as research papers of the experiment group and the receptivity group are discussed.

Hussaini, M. Y.↗
NASA NTRS1991

Pressure and temperature fluctuations in an axisymmetric flowfield due to shock-boundary layer interactions at high Reynolds numbers at Mach 6

Pressure and temperature fluctuations have been meausred in the vicinity of shock wave-boundary layer interactions due to conical compression ramps on an axisymmetric body. The basic model is a cylindrical body with a 10-deg conical nose. Four conical ramps of vertex angles, 20, 25, 30, and 35 deg serve as shock wave generators. Surface temperature and pressure surveys have been made in the vicinity of the conical ramp vertex, the separation point, and the reattachment point. The temperature response within the flowfield appears to be steady-state for all compression ramp angles and all Reynolds numbers. The pressure response shows some oscillations in the vicinity of the separation point. The characteristic frequency of these fluctuations appears to be in the range from 200 to 1200 Hz with most of the power near 400 Hz. These data indicate the flowfield to be steady-state for all locations with the exception of localized pressure fluctuations in the vicinity of the separation point.

Flanagan, M. J., Jr.↗
NASA NTRS1992

Time dependent heat transfer rates in high Reynolds number hypersonic flowfields

Time dependent heat transfer rates have been calculated from time dependent temperature measurements in the vicinity of shock-wave boundary-layer interactions due to conical compression ramps on an axisymmetric body. The basic model is a cylindrical body with a 10 degree conical nose. Four conical ramps, 20, 25, 30, and 35 degrees serve as shock wave generators. Flowfield surveys have been made in the vicinity of the conical ramp vertex, the separation point, and the reattachment point. A significant effort was made to characterize the natural frequencies and relative powers of the resulting fluctuations in heat transfer rates. This research effort, sponsored jointly by NASA and the Air Force, was conducted in the Air Force Flight Dynamics Directorate High Reynolds Facility. The nominal freestream Mach number was 6, and the freestream Reynolds numbers ranged from 2.2 million/ft to 30.0 million/ft. Experimental results quantify temperature response and the resulting heat transfer rates as a function of ramp angle and Reynolds number. The temperature response within the flowfield appears to be steady-state for all compression ramp angles and all Reynolds numbers, and hence, the heat transfer rates appear to be steady-state.

Flanagan, Michael J.↗