SEARCH · Search NASA

Results for “Band alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Solar position confounds the relationship between ecosystem function and vegetation indices derived from solar and photosynthetically active radiation fluxes

Vegetation indices derived from solar and photosynthetically active radiation (PAR) sensors (i.e. radiation derived) have been under-utilized in inferring ecosystem function, despite measurement capability at hundreds of sites. This under-utilization may be attributed to reported mismatches among the seasonality of radiation- and satellite-derived vegetation indices and canopy photosynthesis; herein referred to as measurement biases. In this work, biases in radiation derived reflectance and vegetation indices were assessed using a decadal record of satellite and ground based spectroradiometer data, ecosystem phenology and CO 2 fluxes, and radiation derived vegetation indices (i.e. the Normalized Difference Vegetation Index [NDVI], the two band Enhanced Vegetation Index [EVI2]) from a high latitude tundra site (i.e. Imnaviat). At Imnaviat, we found poor correspondence between the three types of reflectance and vegetation indices, especially during the latter part of the growing season. Radiation derived vegetation indices resulted in incorrect estimates of phenological timing of up to a month and poor relationships with canopy photosynthesis (i.e. Gross Ecosystem Exchange (GEE)). These mismatches were attributed to solar position (i.e. solar zenith and azimuth angle) and a method, based on the diel visible and near-infrared albedo variation, was developed to improve the performance of the vegetation indices. The ability of radiation derived vegetation indices to infer GEE and phenological dates drastically improved once radiation derived vegetation indices were corrected for solar position associated biases at Imnaviat. Moreover, radiation derived vegetation indices became better aligned with MODerate resolution Imaging Spectroradiometer (MODIS) satellite estimates after solar position associated biases were corrected at Imnaviat and at 25 Fluxnet sites (~90 site years) across North America. Corrections developed here provide a way forward in understanding daily ecosystem function or filling large gaps in eddy covariance data at a significant number of Fluxnet sites.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Depth-resolved cathodoluminescence and surface photovoltage spectroscopies of gallium vacancies in β-Ga 2 O 3 with neutron irradiation and forming gas anneals

The gallium vacancy is one of the dominant native point defects in β-Ga 2 O 3 , one that, together with its complexes, can have a major effect on free carrier densities and transport in this wide bandgap semiconductor. We used a combination of depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy to identify the optical and energy-level properties of these defects as well as how their defect densities and spatial distributions vary with neutron irradiation and temperature-dependent-forming gas anneals. These studies reveal optical signatures that align closely with theoretical energy-level predictions. Likewise, our optical techniques reveal variations in these defect densities that are consistent with hydrogen passivation of gallium vacancies as a function of temperature and depth from the free Ga 2 O 3 surface. These techniques can help guide the understanding and control of dominant native point defects in Ga 2 O 3 .

42 ENGINEERING↗

DOE OSTI2022

Canted antiferromagnetic phases in the candidate layered Weyl material EuMnSb 2

EuMnSb 2 is a candidate topological material which can be tuned towards a Weyl semimetal, but there are differing reports for its antiferromagnetic (AFM) phases. The coupling of bands dominated by pure Sb layers hosting topological fermions to Mn and Eu magnetic states provides a potential path to tune the topological properties. In this study we present single-crystal neutron diffraction, magnetization, and heat-capacity data as well as polycrystalline 151 Eu Mössbauer data which show that three AFM phases exist as a function of temperature, and we present a detailed analysis of the magnetic structure in each phase. The Mn magnetic sublattice orders into a C-type AFM structure below T N Mn = 323 (1) K with the ordered Mn magnetic moment μ Mn lying perpendicular to the layers. AFM ordering of the Eu sublattice occurs below T N Eu1 = 23 (1) K with the ordered Eu magnetic moment μ Eu canted away from the layer normal and μ Mn retaining its higher temperature order. μ Eu is ferromagnetically aligned within each Eu layer but exhibits a complicated AFM layer stacking. Both of these higher-temperature phases are described by magnetic space group (MSG) $\mathcal{Pn'm'a'}$ with the chemical and magnetic unit cells having the same dimensions. Cooling below T N Eu2 =9 (1) K reveals a third AFM phase where μ Mn remains unchanged but μ Eu develops an additional substantial in-plane canting. This phase has MSG $\mathcal{P11}$ $\frac{2_1}{a′}$. We also find some evidence of short-range magnetic correlations associated with the Eu between 12 K≲ T≲ 30 K . Using the determined magnetic structures, we postulate the signs of nearest-neighbor intralayer and interlayer exchange constants and the magnetic anisotropy within a general Heisenberg model. We then discuss implications of the various AFM states in EuMnSb 2 and their potential for tuning topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Reconfigurable Magnetotransport in MnBi 2 Te 4 via Gate and Magnetic Field Tuning

The intrinsic magnetic topological insulator MnBi 2 Te 4 is a promising platform for exploring quantum phases with nontrivial band topology and for enabling electrical control over coupled magnetic and electronic phase transitions. In-plane magnetic fields, in particular, offer a distinct means of tuning these properties by strengthening quantized Hall effects, enhancing surface energy gaps, and driving spin reorientation transitions. However, a systematic understanding of how such fields affect magnetotransport is limited. Here, the magnetotransport behavior of few-layer MnBi 2 Te 4 as a function of gate voltage, temperature, and magnetic field angle, with a primary focus on in-plane field effects, are investigated. A gate-tunable crossover in magnetoresistance is observed from positive to negative values under in-plane magnetic fields as the gate voltage is swept below the charge neutrality point at temperatures below the Néel temperature. The in-plane field drives a transition from the antiferromagnetic ground state to a ferromagnetic configuration with spins aligned in-plane, while simultaneously altering the electronic structure, as revealed by gate-dependent transport features. The angle-dependent measurements reveal strongly gate-tunable magnetotransport anisotropy. These results establish in-plane magnetic fields as an effective tuning parameter for modulating spin and charge transport in MnBi 2 Te 4 , advancing prospects for reconfigurable spintronic and topological devices.

MnBi 2 Te 4↗

DOE OSTI2021

Range-separated hybrid functionals for mixed dimensional heterojunctions: Application to phthalocyanines/MoS 2

We analyze the electronic structure and level alignment of transition-metal phthalocyanine (MPc) molecules adsorbed on two-dimensional MoS 2 employing density functional theory (DFT) calculations. We develop a procedure for multi-objective optimal tuning of parameters of range-separated hybrid functionals in these mixed-dimensional systems. Using this procedure, which leads to the asymptotically-correct exchange-correlation potential between molecule and two-dimensional material, we obtain electronic structures consistent with experimental photoemission results for both energy level alignment and electronic bandgaps, representing a significant advance compared to standard DFT methods. We elucidate the MoS 2 valence resonance with the transition-metal phthalocyanine non-frontier 3d orbitals and its dependence on the transition metal atomic number. Based on our calculations, we derive parameter-free, model self-energy corrections that quantitatively accounts for the effects of the heterogeneous dielectric environment on the electronic structure of these mixed-dimensional heterojunctions.

2D materials↗

DOE OSTI2025

High-Spectral Resolution Lidar (HSRL) Instrument Handbook

High-spectral-resolution lidar (HSRL) systems provide vertical profiles of optical depth, backscatter cross-section, depolarization, and backscatter phase function. All HSRL measurements are calibrated by reference to molecular scattering, which is measured at each point in the lidar profile. Like the Raman lidar (RL), but unlike simple backscatter lidars such as the micropulse lidar (MPL), this enables the HSRL to measure backscatter cross-sections and optical depths without prior assumptions about the scattering properties of the atmosphere. The depolarization observations allow robust discrimination between ice and water clouds. Rigorous error estimates can be computed for all measurements. A very narrow angular field of view reduces multiple scattering contributions. The small field of view, coupled with a narrow optical bandwidth, nearly eliminates noise due to scattered sunlight. The laser transmitter is a diode-pumped, frequency-doubled Nd:YAG laser. Narrow-band, single-frequency operation is provided by injection seeding with a single-frequency, cw-diode-pumped diode laser. The main laser cavity is maintained in resonance with the seed laser by adjusting the cavity length to minimize the time between the Q-switch trigger and the emission of the laser pulse. The emission wavelength is tuned via temperature control of the seed laser crystal and is locked to line #1109 of the iodine absorption spectra. Locking is accomplished by minimizing the transmission through a 2-cm-long iodine absorption cell. Use of a high-repetition-rate laser and expansion of the transmitted beam through a 400-mm telescope reduces the transmitted energy density to eye-safe levels. It is possible to look directly into the output beam without hazard. The receiver and transmitter use the same afocal telescope, simplifying the maintenance of stable alignment of the transmitter and receiver although the angular FOV is only 100 μrad. The small FOV and the 4-kHz repetition rate also limit the near-field signal strength, making it possible to record continuous profiles that start at an altitude of ~100 m and extend to 30 km using photon counting detectors. The small FOV also suppresses multiple scattering contributions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Topological and magnetic properties of a noncollinear spin state on a honeycomb lattice in a magnetic field

Here, this paper studies the topological and magnetic properties of a noncollinear spin state on a honeycomb lattice that evolves from coplanar to ferromagnetic with a magnetic field applied along the z axis. The coplanar state is stabilized by nearest-neighbor ferromagnetic interactions, single-ion anisotropy along z, and DzyaloshinskiiMoriya interactions between next-nearest-neighbor sites. Below the critical field H$_c$ that aligns the spins, the magnetic unit cell contains six sites and the spin dynamics contains six magnon modes. Although the classical energy is degenerate with respect to the twist angle φ between nearest-neighbor spins, the dependence of the free energy on φ at low temperatures is dominated by the magnon zero-point energy, which contains extremum at φ = πl/3 for integer l. The only unique ground states GS(φ) have l = 0 or 1. For H < H$'_c$, the zero-point energy has minima at even l and the ground state is GS(0); for H$'_c$ < H < H$'_c$, the zero-point energy has minima at odd l and the ground state is GS(π/3). In GS(0), the magnon density of states exhibits five distinct topological phases with increasing field associated with the opening and closing of energy gaps between two or three magnonic bands. While the Berry curvature vanishes for the coplanar φ = 0 phase in zero field, the Berry curvature and Chern numbers exhibit signatures of the five topological phases below H$'_c$. Whereas the Berry curvature and Chern number are sensitive to changes in the magnon density of states within GS(π/3), the inelastic spectrum S(k,ω) is sensitive to changes in the intensity of the magnon modes in the different magnetic phases GS(0) and GS(π/3) rather than the five topological phases within GS(π/3).

Fishman, Randy S. [Oak Ridge National Laboratory (↗

DOE OSTI2020

Effects of filling, strain, and electric field on the Néel vector in antiferromagnetic CrSb

CrSb is a layered antiferromagnet (AFM) with perpendicular magnetic anisotropy, a high Néel temperature, and large spin-orbit coupling (SOC), which makes it interesting for AFM spintronic applications. To elucidate the various mechanisms of Néel vector control, the effects of strain, band filling, and electric field on the magnetic anisotropy energy (MAE) of bulk and thin-film CrSb are determined and analyzed using density functional theory. The MAE of the bulk crystal is large (1.2 meV per unit cell). Due to the significant ionic nature of the Cr-Sb bond, finite slabs are strongly affected by end termination. Truncation of the bulk crystal to a thin film with one surface terminated with Cr and the other surface terminated with Sb breaks inversion symmetry, creates a large charge dipole and average electric field across the film, and breaks spin degeneracy, such that the thin film becomes a ferrimagnet. The MAE is reduced such that its sign can be switched with realistic strain, and the large SOC gives rise to an intrinsic voltage controlled magnetic anisotropy. A slab terminated on both faces with Cr remains a compensated AFM, but with the compensation occurring nonlocally between mirror-symmetric Cr pairs. In-plane alignment of the moments is preferred, the magnitude of the MAE remains large, similar to that of the bulk, and it is relatively insensitive to filling.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Growth and Characterization of Epitaxial FeWO 4 Thin Films with Controlled Oxygen Stoichiometry

Here, we report the growth of single-phase epitaxial FeWO 4 thin films, using plasma-assisted molecular beam epitaxy, and investigate structural, optical, and electronic properties. The FeWO 4 films grow in (100) orientation on c-plane sapphire (0001) substrates and exhibit 3 rotational twin variants where FeWO 4 [001] is aligned to sapphire [100] equivalent in-plane directions. X-ray diffraction measurements indicate that the epitaxial FeWO 4 (100) structure is optimized when 80-100 W of rf power is applied to an atomic oxygen source during growth, yielding films with minimal strain and impurity phases or other orientations. In films grown with 120 W of rf power, FeWO 4 crystallites develop inhomogeneous and homogeneous strains and are potentially contaminated with Fe 3+ oxide phase impurities. In films grown with 60 W of rf power, FeWO 4 crystallites do not form fully epitaxial layers. X-ray photoelectron spectroscopy indicates that the structural changes are correlated with the Fe 3+ /Fe 2+ oxidation state ratio increasing from 0.6-1.4 with rf power from 60-120 W. X-ray fluorescence spectroscopy indicates that the Fe/W composition ratio is also increasing from 1.1-1.8 with rf power from 60-120 W. Ultraviolet and visible optical absorption spectra indicate a 1.8 ± 0.1 eV band gap with an additional interband absorption feature at 3.1 ± 0.1 eV in the 80-100 W films, with similar onsets observed in the 60 W films. In the 120 W films, the higher lying transition is shifted to 2.7 ± 0.1 eV due to the Fe 3+ enrichment. Electrical resistivity decreases over 2 orders of magnitude with oxidation from 10 4 -10 5 Ω cm in 60 W films to 120 ± 10 Ω cm in 120 W films. Thermopower measurements show p-type to n-type conductivity conversion when oxidation states shift from Fe 2+ majority in the 100 W films to Fe 3+ majority in the 120 W films. We conclude that electron polaron hopping driven by Fe 3+ is a dominant transport mechanism and a source of n-type conductivity in overoxidized FeWO 4 films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Compiled TBS data from Oliktok Point from ICARUS, AVPOP, and POPEYE

The dataset encompasses QA/QC TBS data, including TBS altitude, atmospheric pressure, dew point, POPs number concentrations and mean aerosol size, relative humidity, temperature, equivalent potential temperature, equivalent temperature, and date and time. These data are provided per day for at least one TBS flight. Supporting data from the AMF3 aligned with the timestamps of the TBS data include cloud base distance from TBS, if the time corresponds to cloud base transit of the TBS, surface-based pressure, surface-based precipitation rate, surface-based UHSAS data, ceilometer cloud base height, KAZR cloud top height, and MWR liquid water content. Both POPS and UHSAS aerosol number concentrations are provided as: (1) absolute (i.e. concentrations for each instrument's total size range) and (2) the overlapping size range (i.e. the same size bins for both instruments).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Anisotropic magnetism and electronic structure of trigonal EuAl 2 Ge 2 single crystals

Understanding the interplay between magnetic and electronic degrees of freedom is of profound recent interest in different Eu-based magnetic topological materials. Here, we studied the magnetic and electronic properties of the layered Zintl-phase compound EuAl 2 Ge 2 crystallizing in the trigonal CaAl 2 Si 2 -type structure. We report zero-field neutron diffraction, temperature T - and magnetic-field H-dependent magnetic susceptibility χ(T, H), isothermal magnetization M(T, H), heat capacity C p (T, H), and electrical resistivity ρ(T, H) measurements, together with T-dependent angle-resolved photoemission spectroscopy (ARPES) measurements complemented with first-principle calculations. EuAl 2 Ge 2 undergoes second-order A-type antiferromagnetic (AFM) ordering below T N = 27.5(5) K, with the Eu moments (Eu 2+ , S = 7/2) aligned ferromagnetically in the ab plane while these layers are stacked antiferromagnetically along the c axis. The critical fields at which all moments become parallel to the field are 37.5(5) and 52.5(5) kOe for H ∥ ab and H ∥ c, respectively. The H = 0 magnetic structure consists of trigonal AFM domains associated with ab-plane magnetic anisotropy and a field-induced reorientation of the Eu spins in the domains is also evident at T = 2 K below the critical field H c1 = 2.5(1) kOe. The ρ(T) measurements reveal metallic behavior transforming into a slight resistivity increase on cooling towards T N . A pronounced loss of spin-disorder scattering is observed below T N . The ARPES results show that EuAl 2 Ge 2 is metallic both above and below T N , and the Fermi surface is anisotropic with two hole pockets at the zone center and one small electron pocket at each M point. In the AFM phase, we directly observe folded bands in ARPES due to the doubling of the magnetic unit cell along the c axis with an enhancement of quasiparticle weight due to the complex change in the coupling between the magnetic moments and itinerant electrons on cooling below T N . The observed electronic structure is well reproduced by first-principle calculations, which also predict the presence of nontrivial electronic states near the Fermi level in the AFM phase with Z 2 topological numbers 1;(000)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Magnetic structures and excitations in sawtooth olivine chalcogenides Mn 2 SiX 4 (X = S, Se)

The Mn lattice in olivine chalcogenide Mn 2 SiX 4 (X = S, Se) compounds forms a sawtooth, which is of special interest in magnetism owing to the possibility of realizing flat bands in magnon spectra, a key component in magnonics. In this work, we investigate the Mn 2 SiX 4 olivines using magnetic susceptibility, and X-ray and neutron diffraction. We have determined the average and local crystal structures of Mn 2 SiS 4 and Mn 2 SiSe 4 using synchrotron X-ray, neutron diffraction, and X-ray total scattering data followed by Rietveld and pair distribution function analyses. It is found from the pair distribution function analysis that the Mn triangle that constitutes the sawtooth is isosceles in Mn 2 SiS 4 and Mn 2 SiSe 4 . The temperature evolution of magnetic susceptibility of Mn 2 SiS 4 and Mn 2 SiSe 4 shows anomalies below 83 K and 70 K, respectively, associated with magnetic ordering. From the neutron powder diffraction measurements the magnetic space groups of Mn 2 SiS 4 and Mn 2 SiSe 4 are found to be Pnma and Pnm'a', respectively. Here, we find that the Mn spins adopt a ferromagnetic alignment on the sawtooth in both Mn 2 SiS 4 and Mn 2 SiSe 4 but along different crystallographic directions for the S and the Se compounds. From the temperature evolution of Mn magnetic moments obtained from refining neutron diffraction data, the transition temperatures are accurately determined as T N (S) = 83(2) K and T N (Se) = 70.0(5) K. Broad diffuse magnetic peaks are observed in both the compounds, and are prominently seen close to T N , suggesting the presence of a short-range magnetic order. The magnetic excitations studied using inelastic neutron scattering reveal a magnon excitation with an energy corresponding to approximately 4.5 meV in both S and Se compounds. Spin correlations are observed to persist up to 125 K much above the ordering temperature and we suggest the possibility of short-range spin correlations responsible for this.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

O 2 based resonantly ionized photoemission thermometry analysis of supersonic flows

Characterization of the thermal gradients within supersonic and hypersonic flows is essential for understanding transition, turbulence, and aerodynamic heating. Developments in novel, impactful non-intrusive techniques are key for enabling flow characterizations of sufficient detail that provide experimental validation datasets for computational simulations. In this work, Resonantly Ionized Photoemission Thermometry (RIPT) signals are directly imaged using an ICCD camera to realize the techniques 1D measurement capability for the first time. The direct imaging scheme presented for oxygen-based RIPT (O 2 RIPT) uses the previously established calibration data to direct excite various resonant rotational peaks within the S-branch of the C 3 Π, ( v = 2) ← X 3 Σ( v ′ = 0) absorption band of O 2 . The efficient ionization of O 2 liberates electrons that induce electron avalanche ionization of local N 2 molecules generating N 2 + , which primarily deexcites via photoemissions of the first negative band of N 2 + ( B 2 Σ <#comment/> u + − <#comment/> X 2 Σ <#comment/> g + ) . When sufficient lasing energy is used, the ionization region and subsequent photoemission signal is achieved along a 1D line thus, if directly imaged can allow for gas temperature assignments along said line; demonstrated here of up to five centimeters in length. The temperature gradients present within the ensuing shock train of a supersonic under expanded free jet serves as a basis of characterization for this new RIPT imaging scheme. The O 2 RIPT results are extensively compared and validated against well-known and established techniques (i.e., CARS and CFD). The direct imaging capability fully realizes the technique’s fundamental potential and is expected to be the standard of implementation going forward. The direct imaging capability can play instrumental roles in future scientific studies that rely upon acute characterization of thermal gradients within a medium that cannot be easily resolved by a point. Furthermore, the removal of the spectrometer greatly reduces the cost, complexity, and optical alignment associated with prior RIPT measurements.

42 ENGINEERING↗

DOE OSTI2023

Ultradiffuse Galaxies (UDGs) with Hyper Suprime-Cam. I. Revised Catalog of Coma Cluster UDGs*

This is the first in a series of papers on the properties of ultradiffuse galaxies (UDGs) in clusters of galaxies. We present an updated catalog of UDGs in the Coma Cluster using g- and r-band images obtained with Hyper Suprime-Cam (HSC) of the Subaru telescope. We develop a method to find UDGs even in the presence of contaminating objects, such as halos and background galaxies. This study expands upon our previous works that covered about half the area of the Coma Cluster. The HSC observations covered the whole Coma Cluster up to the virial radius and beyond (an area twice as large as the previous studies) and doubled the numbers of UDGs (r eff , r ≥ 1.5 kpc) and sub-UDGs (1.0 ≤ r eff , r < 1.5 kpc) to 774 and 729, respectively. The new UDGs show internal properties consistent with those of previous studies (e.g., a Sérsic index of approximately 1), and are distributed across the cluster, with a concentration around the cluster center. The whole cluster coverage clearly revealed an excess of their distribution toward the east to southwest direction along the cluster center, where Coma connects to other large-scale structure, and where a known substructure exists (the NGC 4839 subgroup). The alignment of the UDG distribution along the large-scale structure around Coma supports the interpretation that most of them lie at the distance of the Coma Cluster and the NGC 4839 subgroup.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials (Final Report)

In this DOE Early Career project “Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials,” the PI’s group has combined ferroelectric field effect with nanoscale domain imaging and writing to design the electronic and optical properties of two-dimensional (2D) van der Waals materials, including graphene and transition metal dichalcogenides MoS2 and ReS2. The van der Waals materials have been prepared into field effect transistor (FET) devices with ferroelectric gates. Through domain patterning in a ferroelectric polymer PVDF-TrEF top-gate via conductive atomic force microscopy, the team has created programmable Schottky junctions in monolayer MoS 2 , where both barrier height and I-V rectifying polarity can be reconfigured. The transport anisotropy of monolayer to few-layer ReS 2 has been mapped out by defining the entire channel into an insulating state and creating nanoscale conducting paths along different directions through domain writing in the ferroelectric top-gate. The result shows that the conductivity along and perpendicular to the Re-chain can differ by >5.5x10 4 . Theoretical modeling points to the band origin of the transport anomaly and reveals the emergence of a flat band in few-layer ReS 2 . The interfacial epitaxial relation between ReS 2 and PVDF-TrFE further promotes the formation of close-packed, highly ordered PVDF-TrFE nanowires with width of 35 nm and 10 nm. Nonvolatile modulation of quantum Hall effect has been achieved in graphene FETs with a ferroelectric oxide Ba 0.4 Sr 0.6 TiO 3 back-gate. Scattering from the remote surface optical phonon in Ba 0.4 Sr 0.6 TiO 3 limits the room temperature mobility of graphene to be about 3x10 4 cm 2 /Vs. Steep-slope switching has been achieved in MoS 2 FETs back-gated by polycrystalline Pb(Zr,Ti)O 3 , which signals a static-state negative capacitance mode without involving an additional dielectric layer. Piezoresponse force microscopy studies show that the sub-threshold swing can be well correlated with the domain wall density in Pb(Zr,Ti)O 3 . The team also observes an unconventional filtering effect of the second harmonic generation response at the MoS 2 /Pb(Zr,Ti)O 3 heterointerface, which can be accounted for by the alignment between one of the polar axes of MoS 2 and the chiral dipole rotation at the surface of domain wall in Pb(Zr,Ti)O 3 . The research supported by this DOE grant has significantly advanced the fundamental understanding and functional design of ferroelectric/2D van der Waals heterostructures for their implementation towards energy applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Designing Ta C Virtual Substrates for Vertical Al x Ga 1 − x N Power Electronics Devices

Power electronics are critical for a sustainable energy future, playing a key role in electrification and integration of renewable energy sources into the grid. Advances in ultrawide band gap materials are needed to handle higher powers in smaller form factors while reducing electrical and thermal losses. High Al content Al x Ga 1 − x N is theoretically capable of meeting these demands, but its impact in power electronics has been severely restricted by a lack of substrates that can satisfy conductivity, lattice matching, and/or thermal expansion requirements. We demonstrate that electrically conductive Ta C can be used as a virtual substrate for Al x Ga 1 − x N heteroepitaxy. Scaleably sputtered Ta C grown on Al 2 O 3 , followed by high-temperature face-to-face annealing, produces a thin film Ta C template with an effective hexagonal lattice constant matched to Al 0.70 Ga 0.30 N . Annealing of the Ta C promotes recrystallization, significantly improving crystallinity and reducing crystalline defects from as-deposited columnar grains to a step-and-terrace surface morphology, enabling the subsequent growth of high-quality Al 0.70 Ga 0.30 N by molecular beam epitaxy. X-ray diffraction and scanning transmission electron microscopy confirm that the Al x Ga 1 − x N layer is heteroepitaxially aligned, strain-free, and lattice-matched, transitioning abruptly from Ta C to Al x Ga 1 − x N without intermediate phases. These results demonstrate Ta C virtual substrates as electrically conductive, lattice-matched, and thermally compatible templates for vertical Al x Ga 1 − x N devices that can meet the growing power needs of a sustainable energy future. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2025

Wet-radome attenuation in ARM cloud radars and its utilization in radar calibration using disdrometer measurements

Abstract. A relative calibration technique has been developed for the US Department of Energy's (DOE's) Atmospheric Radiation Measurement (ARM) user facility Ka-band ARM Zenith Radars (KAZRs). This method uses the signal attenuation caused by water on the radome to estimate reflectivity factor (Ze) offsets. The wet-radome attenuation (WRA) is assumed to follow a log-linear relationship with rainfall rate during light and moderate rain, as measured by a collocated surface disdrometer. The technique has an uncertainty of approximately 3 dB, due to factors such as disdrometer measurement error, rain variability between radar and disdrometer sample volumes, and the fitting function's uncertainty for the WRA behavior. A practical advantage of this WRA-based approach to shorter-wavelength radar monitoring is that, while it requires a reference disdrometer, it proves feasible for a wider range of collocated disdrometer measurements compared to traditional direct disdrometer comparison at the onset of light rain. This technique thus offers a cost-effective monitoring tool for remote or long-term radar deployments. This calibration technique was applied during the ARM Tracking Aerosol Convection Interactions Experiment (TRACER) from October 2021 through September 2022. The estimated Ze offsets were compared against traditional radar calibration and monitoring methods using available datasets from this campaign. Results show that the WRA-based offsets align closely with mean offsets found between cloud radars and from direct disdrometer comparison near the onset of rain, while also reflecting similar offset and campaign-long trends when compared to collocated, independently calibrated radar wind profilers. Nevertheless, overall, the KAZR Ze offsets estimated during TRACER remained stable at approximately 2 dB lower than the disdrometer estimates from the campaign start until the end of June 2022; afterward, the offsets increased to around 7 dB by the campaign's end. This increase is linked to a drop of about 1 dB in transmitter power toward the end of the project.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Optical Linear Polarization toward the Open Star Cluster Casado Alessi 1

We present B-, V-, R-, and I-band linear polarimetric observations of 73 stars in the direction of open star cluster Casado Alessi 1 (hereafter Alessi 1). We aim to use polarimetry as a tool to investigate the properties and distribution of dust grains toward the direction of the cluster. The polarimetric observations were carried out using the ARIES IMaging POLarimeter mounted at the 104 cm telescope of ARIES, Nainital (India). Using the Gaia photometric data the age and distance of the cluster are estimated to be 0.8 ± 0.1 Gyr and 673 ± 98 pc, respectively. A total of 66 stars with a 26′ radius from the cluster are identified as members of the cluster using the astrometric approach. Out of these 66 members, 15 stars were observed polarimetrically and found to have the same value of polarization. The majority of the stars in the region follow the general law of polarization for the interstellar medium, indicating that polarization toward the cluster Alessi 1 is dominated by foreground dust grains. The average values of the maximum polarization (P {sub max}) and the wavelength corresponding to the maximum polarization (λ {sub max}) toward the cluster are found to be 0.83 ± 0.03% and 0.59 ± 0.04 μm, respectively. Also, dust grains toward the cluster appear to be aligned, possibly due to the galactic magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗