Search NASA⌕ Search

SEARCH · Search NASA

Results for “CO2 Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Characterization of Oxy-Coal Swirl Injector

The article presents the design and testing of a coal-slurry swirl-pintle injector for high pressure oxy-coal combustion systems. Pressurized oxy-coal combustion-based systems have the potential to improve efficiency by recovering latent heat of the steam in flue gas and achieve 90% CO2 capture. In oxy-coal combustion, coal is burned in the presence of pure oxygen, which results in higher efficiency and less greenhouse gas in the exhaust. With the advancement of pressurized oxy-coal combustor research, there is a need to investigate injector technology suitable for this unique combustion approach. Effective atomization and mixing of coal-slurry and oxidizer pose a challenge for the efficient burning of coal particles. A swirl-pintle type injector was designed and tested to enhance the atomization of the coal-water slurry spray by adding a swirl to the oxygen flow path. Although pintle type injectors are traditionally used in rocket engines, they present a promising approach in clean coal combustion technology due to higher mixing effectiveness and enhanced performance. The mixing behavior of three pintle injectors with different swirl numbers (S = 0, 0.9, and 1.2) was tested using a high-speed shadow sizing technique. Mixture ratios of 30% (by mass) coal-water slurry were studied. The droplet diameter and dispersion characteristics were determined from shadow images of coal-water spray. The jet breakup length, droplet number, total moment ratio (TMR), and Ohnesorge number were then calculated to compare the performance of different injectors. The paper presents an empirical correlation of the TMR with droplet size and spray regimes. For a pintle injector with S = 1.2 swirler, the droplets diameter was found to be in the range of 1 mm to 12 mm. The jet breakup length was also shorter in comparison to S= 0 and 0.9 injectors. A second atomization zone was also observed at 2 and 5 diameters downstream of injector exist at spray edge and jet core respectively

01 COAL, LIGNITE, AND PEAT↗

Updated Cost And Performance Results for Natural Gas Combined Cycles (NGCC)

Updated cost and performance results are presented by NETL for both F and H Class turbines, presented at the Clearwater Clean Energy Conference in August, 2022. Results are presented for cases with and without 90% CO2 Capture. Preliminary results for high capture rates presented as well.

Fout, Timothy↗

Update to Techno-economic Analysis of BECCS Systems

Presentation of updated cost and performance results for coal and biomass co-firing in a pulverized coal power plant both with and without CO2 Capture at the Clearwater Clean Energy Conference. Update includes a 100% biomass fired case with and without capture.

Fout, Timothy↗

Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies

Presentation describing NETL's public report entitled "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies" which features levelized cost of hydrogen (LCOH) and greenhouse gas emissions from six cases (3 reforming and 3 gasification technology cases) as well as CO2 capture. One case also features coal/biomass co-gasification that targeted net-zero emissions.

Stevens, Robert↗

Economics of CCUS

High level overview of the performance and cost of post-combustion CO2 capture on pulverized coal and natural gas combined cycles in greenfield and retrofit applications. Includes effects of less than 90% capture as well.

Fout, Timothy↗

Pulsed Neutron Capture for monitoring CO2 Storage with Enhanced Oil Recovery in Northern Michigan

Pulsed neutron capture (PNC) logging has been used as part of the Midwest Regional Carbon Sequestration Partnership (MRCSP) monitoring of CO2 injection and storage during assessment of enhanced oil recovery (EOR) in several northern Niagaran trend reefs in Michigan. A total of four reefs were selected for these studies to monitor CO2 migration and to test the viability and effectiveness of the PNC technology on reefs in various stages (depleted, active and new reefs) of CO2-EOR activities.

Bagley↗

Photo-Reactive Amine-Based Direct Air Capture and Conversion of CO2

This study presents a novel photochemical approach to direct air capture (DAC) and CO2 conversion, utilizing a ruthenium-modified mesoporous TiO2 composite infused with linear polyethyleneimine (L-PEI) and enhanced by light absorbing and earth abundant titanium nitride (TiN). This light-activated system operates at ambient pressure and addresses long-standing challenges in conventional amine-based thermal reactive carbon capture (RCC), including amine degradation and CO2 slip. Our findings demonstrate that L-PEI effectively stabilizes CO2 adsorption and facilitates high-yield methanation over 50 cycles with a non-flammable forming gas mixture (approximately 5% H2). Comparatively, composites incorporating small-molecule amines exhibited poor stability under illumination, while highly mobilie branched PEI (B-PEI) formulations suffered from significant catalyst deactivation. A technoeconomic analysis suggests that methane synthesis via this platform could be achieved at costs below $5/kg under current electrocatalytic hydrogen pricing. These findings highlight the potential of this approach to enhance energy security by enabling decentralized, scalable fuel production from atmospheric CO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learned Force Field Modeling of Metal Organic Frameworks for CO2 Direct Air Capture

Metal organic frameworks (MOFs) are a large class of porous materials and have garnered significant interest due to their large surface areas and their tunable physical and chemical properties. Numerous prior studies have been performed to screen large databases of this material class for promising DAC sorbent materials. These studies have often relied on classical model potentials. While density functional theory (DFT) calculations have been shown to be very accurate for modeling the interaction of CO2 with MOFs, such calculations are too computationally demanding for statistically significant adsorption predictions. To overcome this barrier, we developed methods for training models to achieve DFT-level accuracy for the forces and energies associated with MOF flexibility and CO2 adsorption using machine learned force fields (MLFFs). These methods were parametrized based on DFT calculations of CO2 in a flexible MOF and used to predict MOF structural properties as well as CO2 adsorption in several MOFs.

Findley, John↗

The Economic Accessibility of CO2 Sequestration through Bioenergy with Carbon Capture and Storage (BECCS) in the US

Bioenergy with carbon capture and storage (BECCS) is one strategy to remove CO2 from the atmosphere. To assess the potential scale and cost of CO2 sequestration from BECCS in the US, this analysis models carbon sequestration net of supply chain emissions and costs of biomass production, delivery, power generation, and CO2 capture and sequestration in saline formations. The analysis includes two biomass supply scenarios (near-term and long-term), two biomass logistics scenarios (conventional and pelletized), and two generation technologies (pulverized combustion and integrated gasification combined cycle). Results show marginal cost per tonne CO2 (accounting for costs of electricity and CO2 emissions of reference power generation scenarios) as a function of CO2 sequestered (simulating capture of up to 90% of total CO2 sequestration potential) and associated spatial distribution of resources and generation locations for the array of scenario options. Under a near-term scenario using up to 206 million tonnes per year of biomass, up to 181 million tonnes CO2 can be sequestered annually at scenario-average costs ranging from $62 to $137 per tonne CO2; under a long-term scenario using up to 740 million tonnes per year of biomass, up to 737 million tonnes CO2 can be sequestered annually at scenario-average costs ranging from $42 to $92 per tonne CO2. These estimates of CO2 sequestration potential may be reduced if future competing demand reduces resource availability or may be increased if displaced emissions from conventional power sources are included. Results suggest there are large-scale opportunities to implement BECCS at moderate cost in the US, particularly in the Midwest, Plains States, and Texas.

09 BIOMASS FUELS↗

NETL’s Perspective on Storage Efficiency and CO2-SCREEN

Carbon capture and storage (CCS) is a process that captures carbon dioxide (CO2) by separating it from anthropogenic emissions sources before atmospheric release and storing that CO2 in deep geologic reservoirs. CCS is a powerful method for reducing anthropogenic CO2 which can ultimately diminish the effects of climate change. Prospective CO2 storage resource is the amount of carbon dioxide that can be stored in a given geologic formation typically given as a mass (e.g., metric tons). Obtaining accurate estimates of CO2 storage resources is necessary for governments and industries to make energy-related policy decisions. Researchers at the National Energy Technology Laboratory (NETL) under the Department of Energy (DOE) developed a methods and a tool [CO2-SCREEN (Storage prospeCtive Resource Estimation Excel aNalysis) to estimate prospective carbon storage resources for saline formations, unconventional shale formations, and residual oil zones. The methods and tool provide CO2 storage and efficiency outputs in the form of probability estimates (i.e. P10 and P90) as well as partitioning storage and efficiency estimates based on storage mechanism (total, free phase, sorbed phase, and dissolution phase). This presentation will focus on how storage efficiency is calculated based on numerical modeling efforts, how it’s applied in the storage methods and tool, and then highlighting needs for future development.

Hanson, Angela Goodman↗

BETO 2021 Peer Review - Feasibility Study of Utilizing Electricity to Produce Intermediates from CO2 and Biomass

Capturing and converting CO2 generated from bioethanol facilities into valuable products, leveraging renewable electricity as the primary energy input, could increase overall biorefinery carbon utilization by as much as 40% and provide a means to decarbonize fuels and chemicals production. However, significant uncertainty exists around the costs, carbon intensity, risks, and technical challenges associated with electron-driven CO2 reduction. Thus, the overarching objective of this project is to guide existing and future research and development efforts by addressing these knowledge gaps for utilizing renewable electricity and CO2 to improve biorefinery economics and carbon utilization. By September 2023, this project will develop and publish a comprehensive design report for the integration of CO2 utilization into two existing conceptual biorefinery designs, which will include conceptual process models, pioneer and nth plant economics, identification and quantification of technological risks, and projections for future cost reductions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Energy Arbitrage: Comparison of Options for use with LWR Nuclear Power Plants

Arbitrage is the opportunistic buying and selling of a commodity during local pricing valleys and peaks respectively to maximize economic value. This report evaluates options for energy arbitrage integrated with existing light water reactor (LWR) nuclear power plants (NPPs) where nuclear energy could be stored in a variety of forms and later recovered to generate electrical power during periods when grid electricity demand and pricing are high. The forms of energy storage examined in this report include the potential value of batteries, hydrogen, and thermal energy storage for coupling with nuclear power. Various large demand response options are also analyzed, including the production of liquid nitrogen via air separation and liquefaction, liquefaction of hydrogen, compressed hydrogen, and the cryogenic capture of CO2. Demand response refers to dispatchable loads that can cycle up or down depending on-grid electricity demand to aid in balancing the grid. Large demand response options could dispatch to aid nuclear power stations in avoiding power turndowns by providing an alternate disposition for electrical energy by producing marketable products (e.g., liquid nitrogen, hydrogen, or captured CO2). Static conditions were chosen and analyzed in this report for each option. Dynamic operation or optimization of energy arbitrage or demand response are out of scope for this report. The analysis is based on storage systems with discharge capacities of 500 MW for which various durations of storage and costs of charging (electricity cost) are examined. While the value of thermal energy to an industrial user for flexible plant operations has been previously proven as a business case, this report evaluates costs of hydrogen energy storage and leading thermal energy storage options, and large demand response loads that could be integrated with LWRs in comparison to utility-scale battery storage for use of off-peak nuclear energy. Compilation of this information will be used by the Idaho National Laboratory (INL) RAVEN/HERON systems integration and economics tool to evaluate thermal energy dispatch to industrial users. Relative ranking of energy storage options was done using a levelized cost of storage (LCOS) metric which calculates a rough breakeven cost for the system, taking into account the capital and operating costs as well as the revenue from arbitrage. Table ES1 below shows the LCOS for each of the energy storage options considered. First, in the table, lithium iron (Fe) phosphate batteries are listed as the base case for comparison against the other options. Next is hydrogen storage where most of the hydrogen analyses assumed the hydrogen to be produced using solid oxide electrolytic cell (SOEC) high temperature steam electrolysis (HTSE). The others used existing models of polymer electrolyte membrane (PEM) low temperature electrolysis to produce hydrogen. HTSE performance parameters and costs were taken from existing INL models. Various means were assumed to convert the hydrogen to electricity, including PEM fuel cells (FCs) and a gas turbine mixed in a 30 vol% mixture with natural gas. Physical storage (pressure vessels) and geological storage (natural underground features) were used to store the hydrogen as noted. Geological storage is more economical, but the locations are limited because of the requirement for pre-existing geological formations that will support storage. Thermal energy storage (TES) options were also analyzed including electro-thermal energy storage (ETES) and four different liquid sensible heat TES storage media as noted (Hitec, Hitec XL, Therminol-66, and Dowtherm A). The ETES process considered was modified using existing public documentation on an Echogen process and uses a separate supercritical CO2 charge and discharge cycle with sand as the heat storage media.

25 ENERGY STORAGE↗

Hydroxide Exchange Membrane Carbon Capture (HEMCC) Using Nickel Hydroxide Batteries and Flow-through Membranes

Proposed is an electrochemical nickel hydroxide based hydroxide exchange membrane carbon capture (HEMCC) device for Direct Air Capture (DAC) of CO2. DAC has been identified as one of the key net negative carbon technologies to achieve net zero carbon emissions. Net negative carbon technologies are required to offset continued emissions from dilute CO2 sources such as agriculture and construction. The majority of current DAC technologies at scale (>1 KT∙yr-1) are adsorbent based technologies with significant energy cost. The traditional DAC energy cost is primarily driven by the temperature swing required to regenerate the sorbent and has been shown to be 1.8 MWh·ton-1 at the system level. Electrochemical pH swing devices are a growing research area for carbon capture devices with the goal of lowering the energy cost required for DAC. A pH gradient is built by generating OH- at the cathode and consuming OH- at the anode. An acid-base equilibrium with CO2 allows for the capture of CO2 at the cathode and release at the anode. This extends from other electrochemical CO2 capture devices based on pKa shifts of an electrochemically active organic species allowing for the capture and release of CO2. Electrochemical CO2 capture is considered promising based on potentially low energy costs to capture CO2 in comparison with current temperature swing adsorption technologies. This work explores Ni(OH)2 electrodes to produce the pH gradient for CO2 capture and release. At the cathode NiOOH is reduced to Ni(OH)2 while at the anode Ni(OH)2 is oxidized to NiOOH. The symmetrical electrodes allow for a low voltage requirement; the thermodynamic potential difference of standard electrochemical reactions is zero. Most of the voltage observed is to produce the pH gradient with the remainder driving the polarization of the electrodes. There is a resistance component as well, but this is small in comparison due to the low current densities used in the device, nominally 2 mA·cm-1. Two similar devices are presented, a traditional MEA (membrane electrode assembly) and a flow-through MEA. The traditional MEA separates the two Ni(OH)2 electrodes with an 80μm Piperion® membrane. While the flow-through membrane separates the electrodes with a three piece membrane consisting of two 80μm Piperion® membranes with a porous membrane between them. In the traditional MEA system air is passed over the cathode for capture, while the flow-through MEA the air is passed through the porous membrane isolated from the electrodes. The traditional MEA has been used to establish a baseline performance of the device and has been shown to capture CO2 at an energy cost of 1 MWh·ton-1 at the device level. An understanding has been built around the components of that energy cost including the relationship of flux to current density, effect of a regeneration process, transient battery behavior, and gas losses coinciding with changing the polarization of the batteries. The flow-through MEA looks to address of transient battery behavior and gas losses. It allows for denser, higher capacity electrodes, which can lean on traditional Ni-MH battery technology used in alkaline batteries used today. The higher capacities, limit the transient battery effect on flux in the device. Gas losses are addressed by having a continuous inlet air stream to the device and continuous outlet product.

Buchen, James↗

Controlling Structural, Electronic, and Energy Flow Dynamics of Catalytic Processes through Tailored Nanostructures

MoS 2 (molybdenum disulfide) is a highly-versatile catalyst material for support of numerous reactions from hydrodesulfurization and denitrogenation to the focus of this renewal proposal: hydrogenation of CO/CO 2 towards (higher) alcohols. At the same time, MoS 2 is a non-toxic, environmentally-benign and rather inert material- which under ambient conditions for some time has served as a lubricant and, more recently, as next-generation electronic material. The apparent contrast between inertness and stability in ambient, and catalytic activity under reactive conditions is puzzling and calls for a synergistic theoretical and experimental investigation with the long-term objective of enabling the rational design of MoS 2 -based catalysts for alcohol-formation reactions by providing a microscopic understanding of the environmental factors that determines site activity and selectivity. Our research project seeks answers to the questions (a) what conformation does MoS 2 adopt under reaction conditions (as opposed to that under ultrahigh vacuum and low temperatures)?; (b) what reaction pathways exist on such a material?; (c) how can the local environment of the active sites be manipulated so as to make MoS 2 an efficient catalyst for production of higher alcohol from syngas? In particular, research strategies will explore how the basal plane composed of sulfur atoms can be activated so as to exhibit a reactivity of its own, by addressing three research targets and building on extensive preliminary and enabling work: (1) vacancies and vacancy aggregates on the basal plane; (2) non-local catalyst transformation through alkali doping, hydrogenation and phase transition; (3) fabrication of a metal-nanoparticle-activated MoS 2 system, in which particle anchoring, reactive sites and pathways as well as selectivity are controlled by design, as an example of predictive development of a catalyst material,. All strategies are directed to improve the efficacy of the key reactive sites and selectivity of chemical pathways by design, to replace the inefficient methodology of trial and error in catalyst development. This research project represents a synergistic combination of computational guidance, foundational surface-science-based experiments and validation under reactive conditions that aims at transformative new insights into the working of MoS 2 -based hydrogenation-catalysts, a topic squarely at the center of the interest of DOE BES. Guided and led by Talat Rahman, a computational physicist, this project will apply density functional theory to understand structure, reaction pathways and chemical potentials associated with MoS 2 -based CO/CO 2 hydrogenation, augmented by kinetic Monte Carlo methods for reaction rates and prefactors as well as ab-initio molecular dynamics for evaluation of thermal stability. Complementary experimental input and validation will originate from co-PI Ludwig Bartels, a physical chemist and materials scientist, whose group focuses on local imaging and preparation of MoS 2 materials, from co-PI Peter Dowben, an experimental physicist, whose group is expert in the spectroscopy of occupied and unoccupied electronic states, and from senior collaborator Michael White of Brookhaven National Laboratory, whose group generates high-resolution electronic and activity information on size-selected well-defined metal chalcogenide clusters. This collaborative effort will enable a comprehensive understanding of the correlation of structural integrity and catalytic activity of MoS 2 in forms ranging from extended films to individual particles with known geometries and binding sites. Alcohol formation from syngas is a rapidly emerging application that has great potential through facile, economic, and decentralized biomass gasification. CO 2 activation is one of the most pressing concerns of our time: increasing CO 2 levels in the atmosphere change the climate and expose the globe to environmental transformations with the potential for enormous economic and societal impact. We will investigate CO/CO 2 hydrogenation via an interdisciplinary research collaboration with established synergy – one that, in accordance with the mission of the DOE, involves accredited Hispanic-Serving Institutions and that, through student exchange with international collaborators and National Labs, will directly benefit a broad spectrum of communities and generate human resources in sciences essential to their future.

2D materials↗