Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONVECTIVE FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Spacecraft Fire-Safety Experiments for Space Station: Technology Development Mission

Definitions, overall descriptions, and preliminary apparatus and instrumentation requirements are presented for three spacecraft fire-safety experiments appropriate for inclusion in a growth-version of the Space Station. The experiments are as follows: 1. Combustion and Flame Spread of Typical Spacecraft Materials in a Low­ Velocity Convective Flow in Low Gravity 2. Fire and Fire-Extinguishant Interactions with Various Fire Scenarios in Low Gravity 3. Smoldering and Deep-Seated Combustion in Low Gravity. The experiments were selected from an assessment of recommendations for advanced technologies for prevention, detection, and control of fires in spacecraft. The experiments and their facilities are intended to constitute a portion of a Spacecraft Fire Safety Technology Development Mission (TDM). Basic requirements for the mission study are that the Space Station is essential for the accomplishment of the experimental objectives and that the technology being developed is appropriate for the growth version of the Space Station. The advantages of these three experiments are that, not only do they explore problems relevant to the Space Station operation and utilization, but also they constitute tests adaptable to two multiuse facilities installed in the Space Station laboratory module, the Combustion Tunnel Facility and the Combustion Facility. Three additional spacecraft fire-safety experiments, essential precursors to the TD M for near-term performance, are also described as follows: 1. Near-Term Testing of Materials for Combustion and Flame Spread 2. Near-Term Extinguishment of Fires in a Low-Gravity Test Bed 3. Post-Fire Recovery of Sensitive Electrical and Electronic Equipment. For all the experiments, the study defines accommodations in terms of first-order space, mass, power, consumables, and crew-time estimates. The study also reviews the key problems to be addressed, namely experiment safety hazards, non-intrusive diagnostics development and waste-products disposal. A preliminary task and time schedule for design, development, and experiment fabrication is proposed.

Youngblood, Wallace W.↗

A theoretical analysis of the extinction limits of a methane-air opposed-jet diffusion flame

A theoretical analysis is described for a methane-air diffusion flame stabilized in the forward stagnation region of a porous metal cylinder in a forced convective flow. The analysis includes effects of radiative heat loss from the porous metal surface and finite rate kinetics but neglects the effects of gravity. The theoretically predicted extinction limits compare well with experimentally observed extinction limits from the literature. After the predicted limits compared well with the experimental limits, a parametric study of the effect of fuel surface emissivity and Lewis number was conducted with the numerical model. It was found that the computed blowoff limit is independent of radiative heat loss for high fuel blowing velocities but is a strong function of Lewis number. At low fuel blowing velocities, the extinction limit varies with both radiative heat loss and Lewis number. It is discovered, however, that even if thermal losses from the fuel surface are absent, the flame can extinguish at the fuel surface independently of Lewis number due to excessive reaction zone thinning.

Olson, S. L.↗

Birkeland currents - Recent contributions from satellite magnetic field measurements

The important role that field-aligned Birkeland currents play in solar terrestrial coupling processes has been known from satellite observations for twenty years. Many satellite have been launched since the last Solar-Terrestrial Symposium with instruments capable of investigating the characteristics of Birkeland currents and their relationship to visible and UV auroral forms, particle precipitation, and convection flow patterns. An important result that has emerged is the close relationship between large-scale Birkeland currents and the orientation of the interplanetary magnetic field. These observations emphasize the fact that Birkeland currents are involved in a wide range of space plasma processes which range from small-scale ionospheric instabilities and irregularities to global scale energy coupling processes between the magnetosphere and solar wind.

Potemra, T. A.↗

A fixed grid numerical methodology for phase change problems involving a moving heat source

A numerical method for solving phase change problems involving a moving heat source is presented and illustrated by a two-dimensional example. The method uses a fixed grid and does not require the implementation of the Stefan condition at the solid-liquid interface; the procedure can thus be easily implemented using existing fixed grid codes. The problem considered as an example involves natural convection flow in the molten metal during tungsten inert gas welding.

Prakash, C.↗

Effects of compressibility on the temperature jump at the interface of layered, spherical-shell convection

Large temperature jumps at the interface of layered convection are important to the argument used against the likelihood of separate circulations in the upper and lower mantles. This problem was studied within the framework of a compressible, constant viscosity spherical-shell model. Both mechanical and thermal coupling configurations are considered. Although the temperature jumps are reduced by compressibility, their magnitudes remain quite large, in the case of mechanical coupling. For thermal coupling, the temperature jumps become smaller but still are substantial, between 500 to 1000 C. In layered spherical-shell convection, flows in the lower mantle are several times greater than the surface velocities.

Yen, David A.↗

Preliminary observations of the effect of solutal convection on crystal morphology

Studies to examine the effect of solutal convection on crystal morphology using sucrose as a model system were initiated. Aspect ratios, defined as the width of the 100-plane-oriented face over the width of the 001-plane-oriented face, were determined for oriented crystals which were grown with either the 001-oriented or the 100-oriented face perpendicular to the convective flow. The dependence of the crystal morphology on orientation is much greater for crystals grown with one face occluded than for crystals grown suspended in solution. Many factors appear to interact in a complex fashion to influence crystal morphology.

Broom, M. Beth H.↗

Optical strain measurement system development

A laser speckle, differential strain measurement system has been built and tested for future applications in hostile environments. One-dimensional electronic correlation of speckle pattern movement allows a quasi-real time measure of strain. The system has been used successfully to measure uniaxial strain reaching into plastic deformation of a test specimen, at temperatures ranging to 450 C. A resolution of 126 microstrain is given by the photodiode array sensor pitch and the specimen to sensor separation. The strain measurement error is estimated to be +/-18 microstrain +/-3 percent of the strain reading. The upper temperature limit of the gauge is determined by air density perturbations causing decorrelation of the reference and shifted speckle patterns, and may be improved by limiting convective flow in the immediate vicinity of the test specimen.

Lant, Christian T.↗

Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors.

Gokoglu, S. A.↗

Active Cavity Radiometer (ACR)

The objective of the Active Cavity Radiometer (ACR) experiment on the Atmospheric Laboratory for Applications and Science (ATLAS) mission is the measurement of the total solar irradiance with state-of-the-art accuracy and precision. This experiment is part of an ongoing program of space flight observations to study short- and long-term variations in the total solar output of optical energy. Precise observations of solar total irradiance provide information on the solar cycle and other long-term trends in solar output that are of climatological significance as well as short-term solar physics phenomena such as radiation anisotropy, active region structure, missing flux due to sunsports, bolometry of solar flares, global oscillations, coronal holes, and large-scale convective flows. The principal role of the ATLAS ACR observations will be in support of extended solar irradiance experiments on free-flying satellites. Annual in-flight comparison of observations by both ATLAS and free-flying experiments is an important part of sustaining the long-term precision of the climatological solar irradiance data base at the required + or - 0.1 percent level. Another role for ATLAS solar irradiance measurements will be establishment of the radiation scale at the solar total flux level in the International System of Units (SI). Two types of pyrheliometers, the ACR and SOLCON, will be directly intercompared during the ATLAS 1 mission. Addition of other sensors is planned for future reflights. Comparisons of solar observations by different pyrheliometers in the shuttle space environment will provide the most definitive experiment for determining their accuracy in defining the radiation scale at the solar total flux level.

Willson, R. C.↗

Side-wall gas 'creep' and 'thermal stress convection' in microgravity experiments on film growth by vapor transport

While 'no-slip' boundary conditions and the Navier-Stokes equations of continuum fluid mechanics have served the vapor transport community well until now, it is pointed out that transport conditions within highly nonisothermal ampoules are such that the nonisothermal side walls 'drive' the dominant convective flow, and the familiar Stokes-Fourier-Fick laws governing the molecular fluxes of momentum, energy, and (species) mass in the 'continuum' field equations will often prove to be inadequate, even at Knudsen numbers as small as 0.001. The implications of these interesting gas kinetic phenomena under microgravity conditions, and even under 'earth-bound' experimental conditions, are outlined here, along with a tractable approach to their systematic treatment.

Rosner, Daniel E.↗

Magnetospheric interaction with Triton's ionosphere

The large electron densities measured by the Voyager radio occultation experiment are attributed to the precipitation of magnetospheric electrons with energy above 10 keV. Because the ionospheric electric Pedersen conductivity of Triton is about 10,000-20,000 mho and the Alfven conductance is about 3.5 mho, direct convective flow of plasma into the essentially infinitely conducting ionosphere is negligible. Magnetospheric electrons are transported to Triton's ionopause by curvature drift as a result of weak magnetic field line draping in a sub-Alfvenic plasma interaction with Triton. At the ionopause energetic electrons have a high probability of elastic and inelastic scattering and precipitate into the upper atmosphere. The average power dissipation is estimated to be about (2 - 3) x 10 to the 8th W.

Strobel, Darrell F.↗

Thermosyphon Suspension For Growth Of Crystals

Thermosyphon provides gentle convective flow of supersaturated solution that both suspends and contributes material to growing crystal. Apparatus includes heating section, cooling section, and expansion-and-growth chamber in closed flow loop. Intended for growth of protein crystals, so fragile they are easily damaged by high-shear flows produced by pumps.

Nyce, Thomas A.↗

On the search for evidence of fast mode compressions in the near-earth tail - ISEE observations

A search for earthward propagating fast mode compressions in the near-earth tail has been conducted. ISEE electric and magnetic field data were studied for substorm and quiet times when the spacecraft was close to the neutral sheet, near midnight, and at radial distances of 5.5 to 13 R(E) (earth radii). Due to ISEE orbit characteristics, the set of events covered 12.5 hours, during which time the satellite remained between 8.5 and 13 R(E). Contrary to earlier ideas, no evidence for fast mode compression waves was found during the substorm events studied here, since plasma data and spacecraft potential data showed no density increases at the times of rapid magnetic field increases. For the one compression event for which a temporal offset between the ISEE 1 and ISEE 2 magnetic field structures could be clearly determined, the propagation velocity was about 140 km/s, well below the fast mode speed of about 400 km/s for the measured composition. During substorm events, the largest convection flows were earthward with magnitudes of 100-350 km/sec.

Moortgat, K. T.↗

Directional solidification in immiscible systems - The influence of gravity

The possibility of producing aligned fibrous composite microstructures with a high volume fraction of the immiscible phase, L2, through the directional solidification of hypermonotectic alloys is examined. Early work suggests that low gravity conditions are necessary to prevent sedimentation of the more dense L2 phase. However, if convective flows result, they disrupt the formation of the desired fibrous microstructure and produce a disperse structure. The need for long-duration low-g experiments is emphasized.

Andrews, J. B.↗

The effect of microgravity on protein crystal growth

Based on the results of microgravity crystallization experiments using the protein canavalin aboard four separate U.S. Space Shuttle missions, visual observations and diffraction data are presented that support the contention that protein crystals of improved quality can be obtained in a microgravity environment. With canavalin, no significant increase in resolution was noted, but an overall improvement in diffraction quality, as judged by statistical analyses of the data, was clear. This improvement in quality may be due primarily to the elimination of defects and dislocations rather than an overall enhancement of order. The mechanism for this improvement may be microgravity-stabilized depletion zones that develop around growing crystals that establish and maintain optimal growth conditions more rapidly following nucleation. Such zones would be destroyed by convective flow effects in earth's gravity.

Mcpherson, Alexander↗

Process modeling KC-135 aircraft

Instrumentation will be provided for KC-135 aircraft which will provide a quantitative measure of g-level variation during parabolic flights and its effect on experiments which demonstrate differences in results obtained with differences in convective flow. The flight apparatus will provide video recording of the effects of the g-level variations on varying fluid samples. The apparatus will be constructed to be available to fly on the KC-135 during most missions.

Workman, Gary L.↗

Protein crystal growth (5-IML-1)

Proteins (enzymes, hormones, immunoglobulins) account for 50 pct. or more of the dry weight of most living systems. A detailed understanding of the structural makeup of a protein is essential to any systematic research pertaining to it. Most macromolecules are extremely difficult to crystallize, and many otherwise exciting projects have terminated at the crystal growth stage. In principle, there are several aspects of microgravity that might be exploited to enhance protein crystal growth. The major factor is the elimination of density driven convective flow. Other factors that can be controlled in the absence of gravity is the sedimentation of growing crystals in a gravitational field, and the potential advantage of doing containerless crystal growth. As a result of these theories and facts, one can readily understand why the microgravity environment of an Earth orbiting vehicle seems to offer unique opportunities for the protein crystallographer. This perception has led to the establishment of the Protein Crystal Growth in a Microgravity Environment (PCG/ME) project. The results of experiments already performed during STS missions have in many cases resulted in large protein crystals which are structurally correct. Thus, the near term objective of the PCG/ME project is to continue to improve the techniques, procedures, and hardware systems used to grow protein crystals in Earth orbit.

Bugg, Charles E.↗

Numerical studies of convective transport associated with crystal growth in mirrogravity

Information on numerical studies of convective transport associated with crystal growth in microgravity is given in viewgraph form. Inferences drawn from the research are that protein crystals seem to grow at much larger relative supersaturations than small molecule crystals; growth rate is limited by attachment kinetics more than by transport; attachment kinetics are apparently influenced by convective flows, although the mechanism is uncertain; acceleration levels required to achieve D/L growth within Space Station Freedom specifications may not be achievable on manned vehicles; and D/L transport can help minimize incorporation of impurities, but growth cessation cannot be explained.

Ramachandran, N.↗