Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cathode modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

A nanosecond pulsed discharge circuit model for engine applications

Non-equilibrium plasma discharges in spark gaps have been an increasingly studied method for alleviating cycle to cycle variation in lean and dilute combustion environments. However, ignition models that account for streamer propagation, cathode fall, and transmission line amplification over nanosecond time scales have so far not been developed. The present study develops such a model, with emphasis on the energy delivered from circuit to cylinder. Here, key pieces of the relevant physics and chemistry are summarized, simplified, and systematically coupled to one another. The set of parameters is limited to a handful of key observables and modeled using Modelica. Results show non-trivial behavior in the energy delivery characteristics of such discharges with important implications for ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

LLNL FESP Theory Highlights: November 2024

This talk presented a refined understanding of plasma-facing thermionic emitter cathodes by examining the limitations of the conventional space charge-limited model, which overlooks ion trapping dynamics within the virtual cathode. While conventional theory distinguishes between temperature-limited and space charge-limited regimes based on electron current constraints, recent findings reveal that trapped ions can form a quasi-neutral "second plasma," expanding upstream and interacting with the primary plasma. These effects are amplified in non-planar geometries, such as cylindrical or spherical sheaths, where trapped ions create a positive feedback loop with the upstream plasma. To address these phenomena, a new "Aid-and-Compete" model was developed, offering insights into current enhancement and sheath mode transitions relevant for plasma devices, including emissive cathodes in electric propulsion, fusion applications, thin film deposition systems, and plasma diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantification of ionic transport within thermally-activated batteries using electron probe micro-analysis

The transient transport of electrolytes in thermally-activated batteries is studied in this paper using electron probe micro-analysis (EPMA), demonstrating the robust capability of EPMA as a useful tool for studying and quantifying mass transport within porous materials, particularly in difficult environments where classical flow measurements are challenging. By tracking the mobility of bromine and potassium ions from the electrolyte stored within the separator into the lithium silicon anode and iron disulfide cathode, we are able to quantify the transport mechanisms and physical properties of the electrodes including permeability and tortuosity. Due to the micron to submicron scale porous structure of the initially dry anode, a fast capillary pressure driven flow is observed into the anode from which we are able to set a lower bound on the permeability of 10 -1 mDarcy. The transport into the cathode is diffusion-limited because the cathode originally contained some electrolyte before activation. Finally, using a transient one-dimensional diffusion model, we estimate the tortuosity of the cathode electrode to be 2.8 ± 0.8.

25 ENERGY STORAGE↗

Analytical Modeling of Electron Back-Bombardment Induced Current Increase in Un-Gated Thermionic Cathode Rf Guns

In this paper we derive analytical expressions for the output current of an un-gated thermionic cathode RF gun in the presence of back-bombardment heating. We provide a brief overview of back-bombardment theory and discuss comparisons between the analytical back-bombardment predictions and simulation models. We then derive an expression for the output current as a function of the RF repetition rate and discuss relationships between back-bombardment, field-enhancement, and output current. We discuss in detail the relevant approximations and then provide predictions about how the output current should vary as a function of repetition rate for some given system configurations.

BACK-BOMBARDMENT↗

ANALYTICAL MODELING OF ELECTRON BACK-BOMBARDMENT INDUCED CURRENT INCREASE IN UN-GATED THERMIONIC CATHODE RF GUNS

In this paper we derive analytical expressions for the output current of an un-gated thermionic cathode RF gun in the presence of back-bombardment heating. We provide a brief overview of back-bombardment theory and discuss comparisons between the analytical back-bombardment predictions and simulation models. We then derive an expression for the output current as a function of the RF repetition rate and discuss relationships between back-bombardment, fieldenhancement, and output current. We discuss in detail the relevant approximations and then provide predictions about how the output current should vary as a function of repetition rate for some given system configurations.

Edelen, J. P.↗

Stabilizing High–Nickel Cathodes with High–Voltage Electrolytes

Electrolytes connect the two electrodes in a lithium battery by providing Li + transport channels between them. Advanced electrolytes are being explored with high-nickel cathodes and the lithium-metal anode to meet the high energy density and cycle life goals, but the origin of the performance differences with different electrolytes is not fully understood. Here, the mechanisms involved in protecting the high-capacity, cobalt-free cathode LiNiO 2 with a model high-voltage electrolyte (HVE) are delineated. The kinetic barrier posed by a thick surface degradation layer with poor Li + -ion transport is found to be the major contributor to the fast capacity fade of LiNiO 2 with the conventional carbonate electrolyte. In contrast, HVE reduces the side reactions between the electrolyte and the electrodes, leading to a thinner nano-interphase layer comprised of more beneficial species. Crucially, the HVE leads to a different surface reorganization pathway involving the formation of a thinner nanoscale LiNi 2 O 4 spinel phase on the LiNiO 2 surface. Finally, with a high 3D Li + -ion and electronic conductivity, the spinel LiNi 2 O 4 reorganization nanolayer preserves fast Li + transport across the cathode–electrolyte interface, reduces reaction heterogeneity in the electrode and alleviates intergranular cracking within secondary particles, resulting in superior long-term cycle life.

25 ENERGY STORAGE↗

Impedance of an intense plasma-cathode electron source for tokamak startup

In this study, an impedance model is formulated and tested for the ~1kV, ~1kA/cm 2 , arc-plasma cathode electron source used for local helicity injection tokamak startup. A double layer sheath is established between the high-density arc plasma (n arc ≈ 10 21 m -3 ) within the electron source, and the less dense external tokamak edge plasma (n edge ≈ 10 18 m -3 ) into which current is injected at the applied injector voltage, V inj . Experiments on the Pegasus spherical tokamak show the injected current, I inj , increases with V inj according to the standard double layer scaling I inj ~ V inj 3/2 at low current and transitions to I inj ~ V inj 1/2 at high currents. In this high current regime, sheath expansion and/or space charge neutralization impose limits on the beam density n b ~ I inj /V inj 1/2 . For low tokamak edge density n edge and high I inj , the inferred beam density n b is consistent with the requirement n b ≤ n edge imposed by space-charge neutralization of the beam in the tokamak edge plasma. At sufficient edge density, n b ~ n arc is observed, consistent with a limit to n b imposed by expansion of the double layer sheath. These results suggest that n arc is a viable control actuator for the source impedance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Examining Ohmic Losses in Fuel-Cell Catalyst Layers with Different Pt/C Ratios

A model of a fuel-cell cathode with distinct proton conductivities at the agglomerate and electrode scales was used to simulate polarization curves under conditions with facile oxygen transport. Here, the model was applied to electrodes containing agglomerates with different ratios of platinum to carbon in order to examine the hypothesis that intra-agglomerate proton conductivity is substantially lower than ionomer conductivity. The model predicts decreasing performance and increasing sensitivity to Pt/C ratio as intra-agglomerate conductivity declines relative to a constant through-electrode conductivity. Experiments on catalyst layers with Vulcan supports do not show the predicted trend indicating that mesoscale intra-agglomerate conductivity is not orders of magnitude lower than bulk ionomer conductivity.

08 HYDROGEN↗

Neutralizer Hollow Cathode Simulations and Validation with Experiments

The fidelity of electric propulsion physics-based models depends largely on the validity of their predictions over a range of operating conditions and geometries. In general, increased complexity of the physics requires more extensive comparisons with laboratory data to identify the region(s) that lie outside the validity of the model assumptions and to quantify the uncertainties within its range of application. This paper presents numerical simulations of neutralizer hollow cathodes at various operating conditions and orifice sizes. The simulations were performed using a two-dimensional axisymmetric model that solves numerically a relatively extensive system of conservation laws for the partially-ionized gas in these devices. The results for the plasma are compared directly with Langmuir probe measurements. The computed keeper voltages are also compared with the observed values. Wherever model inputs and/or specific physics of the cathode discharge are uncertain, additional sensitivity calculations have been performed to quantify the uncertainties.

partially ionized gases↗

Motion of a virtual cathode in a cylindrical channel with electron beam transport in the “compressed” state

This paper studies the motion of a virtual cathode in a two-section drift tube with the formation and breakup of the “compressed” state of an electron beam. Experimental arrangements to intercept part of the injected current during the voltage pulse and to provide virtual cathode motion toward the collector are proposed. The arrangements were implemented on the SINUS-7 high-current electron accelerator. Theoretical and experimental dependences of the virtual cathode velocity on the injected current and cathode voltage are presented. The experimental data on virtual cathode motion agree with its theoretical model based on analytical solutions of equations assisted by computer simulation with the PIC code KARAT. The results of the work demonstrate the feasibility of controlling the virtual cathode motion which can be used in collective ion acceleration and microwave generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pressure effect on a tandem hollow cathode discharge in argon

The tandem hollow cathode discharge, formulated by arranging two discharges in series, is an important method used to increase the irradiance of a hollow cathode discharge. Here in this paper, based on a two-dimensional fluid model we studied a five-layer tandem hollow cathode discharge, with three hollow electrodes stacked together and separated by the insulators to obtain the configuration of anode/insulator/cathode/insulator/anode from the top to the bottom. In the model, the thickness of both electrodes and insulators is set at 1 cm and the diameter of the hollow cavity is 2 cm. The pressure effect on the discharge properties is investigated with gas pressure ranges from 100 Pa to 5 kPa. The gap voltage first decreases, reaching a minimum sustaining voltage at 1 kPa, and then increases. Based on the two-dimensional electron density distributions, the discharges parameters (including the electron density, ion density, electric potential, and electric field) of one integrated hollow cathode discharge at 1 kPa and two relatively independent discharges at 100 Pa and 4 kPa are presented, respectively. Lastly, the results indicate that the paralleled hollow cathode discharges can be manipulated into one integrated discharge with a higher plasma density by the monotonous control of gas pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the first pulse of Ne-Xe-HCl dielectric barrier discharge for the excimer lamp

A global one-dimensional model of a dielectric barrier discharge which includes the sheath region and the positive column was developed. The model was used to study the electrical properties under operating conditions of the vacuum ultraviolet excimer lamp and to understand the basic processes of plasma kinetics. A 0.5 cm interelectrode gap distance is filled with a Ne-Xe-HCl mixture. Time variations of the charged particles and excited species in the positive column were described. Then the one-dimensional model was used in the cathode region to illustrate (i) the spatio-temporal behavior of electronic and ionic densities and the electric field, and (ii) the time variation of the voltage, the current, and secondary currents due to ion and photon ({lambda}=172 nm) impact on the cathode. It shows a good resolution inside the sheath at high pressure and it correctly predicts the waveform of the discharge behavior. The obtained results have been discussed and analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vibrational Entropy Contribution to Mixing Free Energy of Ni-Rich LiNi 1- y Co y O 2

First principles density-functional-theory calculations are performed of the mixing free energy of the layered oxide LiNi 1-y Co y O 2 , a model Li-ion-battery cathode material, at 1000 K. Analysis of internal energy, LN exchange, configurational entropy and vibrational entropy are combined to obtain the net mixing free energy. The vibrational entropy requires a more indirect treatment than the other terms; analysis based on heat capacity is presented here, to show that the vibrational entropy is of comparable magnitude to the configurational entropy, and it tends to promote solid-solution behavior in LiNi 1-y Co y O 2 .

25 ENERGY STORAGE↗

Comment on Particle acceleration by stimulated emission of radiation near a solid-state active medium

In a recent Letter, V. Berezovsky, H. Alam, and L. Schaechter have reported 'acceleration of electrons moving in free space near an active Nd:YAG slab'. The reported mechanism is particle acceleration by stimulated emission of radiation (PASER). The energy of electrons was not measured directly, but instead inferred from measurements of the electron beam current, after it 'interacted' with the Nd:YAG slab. In this Comment I suggest that the authors proposition that the increase in beam current being due to the increase in beam energy is incorrect. Let us examine the simplified model of the experiment. The cathode emits about 5 mA of a dc electron beam. The beam is collimated by several apertures to about 100 nA before it reaches the collector, where the absorbed beam current is measured. Between the cathode and the collector this beam is 'continuously illuminated' by photons from the actively pumped optical medium. After the electrons 'absorb' the photons the beam current increases by 30%, to about 130 nA. Firstly, if it were true and if there were no beam collimation, this would have been the violation of charge conservation. Ignoring that fact, the authors suggest that: 'Since the charge density is not expected to vary, the change in the current is due to the increase in the velocity of the electrons.' This statement in itself is incorrect, as it violates the continuity of electron flux: when the beam velocity increases, its density decreases such that the beam current remains constant and the charge is conserved. Indeed, in a dc case (as described in the Letter) the continuity equation reads: d(nv)/dz = 0, where v is the beam velocity, n is the linear charge density and z is the coordinate along the beam axis. Since the dc beam current, I = nv and nv = const from Eq. (1), the dc beam current is not expected to vary with the change in velocity. Since the beam current in the experiment did change, it is obvious that the portion of the beam current, removed by the apertures, cannot be ignored in the analysis as it is the most likely source of the beam current increase. Moreover, there is no evidence whatsoever of the proposed PASER effect in this Letter.

43 PARTICLE ACCELERATORS↗

Cabs Milestone I3 Report: Demonstration of Ability to Construct 3D Meshes of Electrodes Using Reconstructions from Micro-Tomography

Mesoscale (100s of particles) electrochemical-thermal-mechanical models and simulations of NMC cathodes are a critical outcome of the CABS project. These simulations require mesostructure geometries and commensurate computational meshes on which to perform the simulations. While these geometries can be generated using a variety of methods, the highest-fidelity approach is to reconstruct the geometry directly from 3D experimental data/measurements. In this milestone report, we demonstrate our ability to create 3D computational meshes using the Conformal Decomposition Finite Element Method (CDFEM) on a selection of NMC cathodes that were imaged using X-Ray Computed Micro-Tomography (X-Ray CT, or simply XCT).

97 MATHEMATICS AND COMPUTING↗

Field Effect Flow Control in a Polymer T-Intersection Microfluidic Network

We present a study of induced pressure pumping in a polymer microchannel due to differential electroosmotic flow @OF) rates via field-effect flow control (FEFC). The experimental results demonstrate that the induced pressure pumping is dependent on the distance of the FEFC gate from the cathodic gate. A proposed flow model based on a linearly-decaying zeta potential profile is found to successfully predict experimental trends.

Sniadecki, Nathan J.↗

Ion thruster life models

In this paper we review the most recent 2-D and 3-D plasma simulation models for ion thruster hollow cathodes, discharge chambers, and ion optics.

grid life↗