Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cell Parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Development of lithium diffused radiation resistant solar cells, part 2

The work performed to investigate the effect of various process parameters on the performance of lithium doped P/N solar cells is described. Effort was concentrated in four main areas: (1) the starting material, (2) the boron diffusion, (3) the lithium diffusion, and (4) the contact system. Investigation of starting material primarily involved comparison of crucible grown silicon (high oxygen content) and Lopex silicon (low oxygen content). In addition, the effect of varying growing parameters of crucible grown silicon on lithium cell output was also examined. The objective of the boron diffusion studies was to obtain a diffusion process which produced high efficiency cells with minimal silicon stressing and could be scaled up to process 100 or more cells per diffusion. Contact studies included investigating sintering of the TiAg contacts and evaluation of the contact integrity.

Payne, P. R.↗
NASA NTRS1985

Terrestrial photovoltaic cell process testing

The paper examines critical test parameters, criteria for selecting appropriate tests, and the use of statistical controls and test patterns to enhance PV-cell process test results. The coverage of critical test parameters is evaluated by examining available test methods and then screening these methods by considering the ability to measure those critical parameters which are most affected by the generic process, the cost of the test equipment and test performance, and the feasibility for process testing.

Burger, D. R.↗
NASA NTRS1980

A study of the factors which control the efficiency of ion-implanted silicon solar cells

The objective of this work was to determine experimentally the ion-implantation parameters and furnace annealing conditions required to produce high-efficiency solar cells. A comprehensive experimental study was conducted in which the optimum ion-implantation parameters were found by a systematic variation of the implant parameters followed by detailed studies of solar-cell devices. Two furnace heat-treatment techniques were found which effectively anneal the implanted layers and at the same time preserve or improve the diffusion length in the bulk silicon. Detailed characteristics of both the junction and bulk properties of solar cells fabricated over the spectrum of implant parameters are discussed. Optimized implant parameters and annealing conditions were found which allow for the fabrication of 14-15-percent (AM1) efficient solar cells.

Douglas, E. C.↗
NASA NTRS1991

Oxygen recombination in the sealed nickel-cadmium cell

The purpose of this study was to determine what parameters are most critical for controlling overcharge pressure in a sealed nickel cadmium cell. Topics covered in viewgraph format are: parameters examined; oxygen evolution and recombination; experimental test description; and effect of parameters on recombination rate.

Zimmerman, Al H.↗
NASA NTRS1977

High efficiency thin-film GaAs solar cells

Several oxidation techniques are discussed which have been found to increase the open circuit (V sub oc) of metal-GaAs Schottky barrier solar cells, the oxide chemistry, attempts to measure surface state parameters, the evolving characteristics of the solar cell as background contamination (has been decreased, but not eliminated), results of focused Nd/YAG laser beam recrystallization of Ge films evaporated onto tungsten, and studies of AMOS solar cells fabricated on sliced polycrystalline GaAs wafers. Also discussed are projected materials availability and costs for GaAs thin-film solar cells.

Stirn, R. J.↗
NASA NTRS1988

Effects of operating parameters on PAFC stack performance

This work was performed to assess actual relationships of phosphoric acid fuel cell voltage responses obtained from subscale cells with air-cooled and full size cells in stacks as a function of operating parameters. Key relationships were verified and found to be in agreement with the Nerst equation. An empirical equation was developed to predict cell voltages as a function of the measureable parameters.

Le, M. T.↗
DOE OSTI2026

Crystal structure, magnetism, and specific heat of lightly depleted layered honeycomb oxides, Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$ ($D$ = Mg, Ga, Co; 0.10 ≤ $x$ ≤ 0.25)

Layered oxides, in which transition metal atoms form a honeycomb lattice, are known for complex magnetic phase diagrams. In this work we study the doped compounds, Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, $D$ = Mg, Ga, and Co (0.10 ≤ $x$ ≤ 0.25), to understand how chemical dilution at the nickel site influences the stability of magnetic exchanges within the honeycomb layer of the parent, Na$_2$ Ni$_2$ TeO$_6$. Here, the studied compounds were found to crystallize in $P6_3/mcm$ space group common to P2 type layered oxides. In general, the lattice parameters and the unit cell volume expanded with increased doping. The oxidation states determined from X-ray photoelectron spectroscopy were consistent with bond valence sum estimates, that confirmed the presence of Ni$^{2+}$, Mg$^{2+}$, Ga$^{3+}$, Co$^{2+}$ in our samples. Irrespective of magnetic or non-magnetic doping, the magnetic phase transition temperature ($T_N$) of the doped compounds were reduced from that of Na$_2$ Ni$_2$ TeO$_6$ or Na$_2$ Co$_2$ TeO$_6$, and lay between 21.7 K and 26.8 K. The effective paramagnetic moments extracted from Curie–Weiss analysis were in the range 3.17 μ B to 3.84 μ B and the Weiss temperatures were between $-15$ K and $-25$ K, suggesting antiferromagnetism. Mg- and Ga-doped compounds showed free spin formation, indicated by Curie–Weiss tails in their magnetic susceptibility. Our results suggest emergence of short-range magnetic correlations in Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, enhanced due to the depletion of the Ni honeycomb lattice.

75 - CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY A↗
DOE OSTI2025

Room temperature buffer gas beam of metastable state titanium atoms

We produce beams of neutral titanium (Ti) atoms in their metastable 3d3(F4)4sa5F5 state by laser ablation into He, N2, and Ar buffer gases. The high temperatures associated with the ablation process populate the a5F5 level without the need for optical pumping. Remarkably, we observe that Ti atoms in the a5F5 state survive thousands of collisions with He and Ar buffer gas atoms without being quenched to lower-energy states. We study the yield of Ti atoms when ablated into buffer gases of varying species and pressure, quantify quenching rates and diffusion cross sections based on simple models, and provide insight into optimal design parameters for an ablation cell. Using a 3.3 cm ablation cell with interchangeable exit apertures, we produce metastable atom beams and quantify their brilliance and velocity distributions as functions of buffer gas pressure.

Schrott, Jackson↗
DOE OSTI2025

Electrochemical-Mechanical Coupling Strongly Affects the Performance of Nanopore, Thin-Film, and Solid-State Batteries

Here, the present study focuses on the electrochemical-mechanical (ECM) coupling effects of a thin-film, solid-state battery with only stiff, ceramic materials, in contrast to prior investigations that focus on individual active material particles or aggregations of particles. We model the impacts of ECM couplings including stress-transport and stress-equilibrium potential on the full-cell performance and potential mechanical failure modes of a thin-film battery conformally deposited in a nanopore scaffold, which is an experimentally achievable device. Model results indicate electrode volume changes due to lithium insertion or removal, along with mechanical boundary conditions, result in stress gradients that alter the lithium-ion flux, reduce lithium concentration gradients, and improve cell rate capability. However, the high stress levels in the cell can also lead to mechanics-related failure such as the separation of cell layers. For the parameter set in this work, stress-transport coupling has a much greater influence on rate capability than stress-potential coupling. Optimization of thin-film batteries to harness the benefits of ECM coupling effects requires leveraging geometric design and material selection. The current work underscores the need for further theoretical and experimental investigation into ECM coupling effects in thin-film batteries to enhance their understanding and design optimization.

25 ENERGY STORAGE↗
DOE OSTI2025

SOC Microstructural Property Estimator

This pre-trained ML model is a tool that uses basic compositional parameters for porous solid oxide cell (SOC) electrodes - the phase fractions and mean particle/pore diameters – as inputs and uses them to estimate additional electrochemical performance parameters: active (i.e., connected) TPB density, all tortuosity factors, and phase pair specific interfacial areas. The electrode is assumed to be composed of two solid phases and a pore phase. The property calculations are performed using neural network regression models trained on a large bank of synthetic electrode microstructural data that NETL has generated using the program DREAM3D (that bank is also hosted on EDX: https://edx.netl.doe.gov/dataset/soc-synthetic-microstructure-bank). This means the generated parameters are based on training from actual measured properties from 3D microstructures, not estimated from geometric simplifications. This tool was developed and is intended to replace percolation theory calculations in models that use hypothetical electrode properties. An example use case would be running SOC performance simulations across a parametric sweep of electrode designs (e.g., varying phase fractions and particle sizes) and assessing how it impacts the electrochemical performance of the SOC. Within the parameter space of the training data (statistics of that parameter space is provided in the readme file), this model achieves sub-5% mean absolute percent errors, an order of magnitude less error than percolation theory across the same parameter space. However, be aware that this tool was developed with parametric simulations in mind, and users are encouraged to assess accuracy for their own specific use case rather than taking accuracy metrics at face value. More info, including a usage guide, is in the included readme file. This tool should be cited with the DOI number provided.

Electrode Microstructure↗
NASA NTRS1971

Crystal structure of alpha poly-p-xylylene.

A crystal structure of alpha poly-p-xylylene is proposed with the help of data of oriented crystals grown during polymerization. The unit cell is monoclinic with the parameters a = 8.57 A, b = 10.62 A, c = 6.54 A (chain axis), and beta = 101.3 deg. Four repeating units per cell lead to a calculated density of 1.185 g/cu cm and a packing density of 0.71. The probable space group is P2 sub 1/m.

Kubo, S.↗
NASA NTRS1974

Sunspot models with Alfven wave emission

Sunspot models have been computed on the assumption that the missing flux is transported by undissipated Alfven waves. In order to estimate the flux of these waves, we propose an extension of Opik's cellular model of convection to include the effects of a vertical magnetic field on horizontal gas flow. Horizontal motions, not vertical motions, are impeded more or less severely depending on the electrical conductivity, and this reduces the convective flux. These motions, however, shake the field lines; this is assumed to be a source of Alfven waves, compensating for the reduction in the convective flux. The free parameter D/H (ratio of cell diameter to cell depth) is adjusted such that the total sum of radiative, convective, and Alfven wave fluxes remains constant at all depths and equals the undisturbed solar flux entering the spot from below. Our treatment is speculative to some extent, but it leads to a unique spot model for a given field strength.

Mullan, D. J.↗
NASA NTRS1975

CdS thin film solar cells for terrestrial power

The development of very low cost long lived Cu2S/CdS thin film solar cells for large scale energy conversion is reported. Excellent evaporated metal grid patterns were obtained using a specially designed aperture mask. Vacuum evaporated gold and copper grids of 50 lines per inch and 1 micron thickness were adequate electrically for the fine mesh contacting grid. Real time roof top sunlight exposure tests of encapsulated CdS cells showed no loss in output after 5 months. Accelerated life testing of encapsulated cells showed no loss of output power after 6 months of 12 hour dark-12 hour AMI illumination cycles at 40 C, 60 C, 80 C and 100 C temperatures. However, the cells changed their basic parameters, such as series and shunt resistance and junction capacitance.

Shirland, F. A.↗
NASA NTRS1977

Applications of remote sensing, volume 1

The author has identified the following significant results. ECHO successfully exploits the redundancy of states characteristics of sampled imagery of ground scenes to achieve better classification accuracy, reduce the number of classifications required, and reduce the variability of classification results. The information required to produce ECHO classifications are cell size, cell homogeneity, cell-to-field annexation parameters, input data, and a class conditional marginal density statistics deck.

Landgrebe, D. A.↗
NASA NTRS1983

Comet flyby sample return experiment

Dust from several comets can be returned to earth with minimum propulsion effort after a high-speed encounter. The collection concept involves the capture of individual dust particles by condensation in a cell after vaporization by a thin diaphragm. This collection concept has been validated in laboratory tests. To compensate for the slower laboratory velocities in a two-stage light-gas gun, higher-density metals (Zn and Cd) have been used for particles and diaphragms to simulate hypervelocity vaporization. Teflon has proved to be a suitable material for the collection cell; more than 50 percent of the vaporized projectile material has been recovered by chemical etching from such cells. Hypervelocity-impact parameters (such as diaphragm-to-projectile ratio, hole size, and plume angles) determined by tests permit the modification of existing analytical models. These new findings are necessary for flyby cometary experiments.

Tsou, P.↗
NASA NTRS1984

Fracture mechanics evaluation of GaAs

A data base of mechanical and fracture properties for GaAs was generated. The data for single crystal GaAs will be used to design reusable GaAs solar modules. Database information includes; (1) physical property characterizations; (2) fracture behavior evaluations; and (3) strength of cells determined as a function of cell processing and material parameters.

Chen, C. P.↗
NASA NTRS2003

Quantification of rat retinal growth and vascular population changes after single and split doses of proton irradiation: translational study using stereology methods

This study quantified architectural and population changes in the rat retinal vasculature after proton irradiation using stereology. A 100 MeV conformal proton beam delivered 8, 14, 20 and 28 Gy as single and split doses to the whole eye. The vascular networks were prepared from retinal digests. Stereological methods were used to obtain the area of the retina and unbiased estimates of microvessel/artery/vein endothelial, pericyte and smooth muscle population, and vessel length. The retinal area increased progressively in the unirradiated, age-matched controls and in the retinas irradiated with 8 and 14 Gy, indicating uniform progressive retinal growth. No growth occurred after 20 and 28 Gy. Regression analysis of total endothelial cell number in all vessels (arteries, veins and capillaries) after irradiation documented a progressive time- and dose-dependent cell loss occurring over 15 to 24 months. The difference from controls was significant (P<0.01) after 28 Gy given in single and split doses and after 20 Gy given as a split dose (P<0.05). Total vessel length in microvessel was significantly shortened at 20 and 28 Gy compared to that of controls (P<0.05). No evident dose recovery was observed in the endothelial populations after split doses. At 10 Gy, the rate of endothelial cell loss, a dose parameter used to characterize the time- and dose-dependent loss of the endothelial population, was doubled.

NASA Discipline Radiation Health↗