Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Aerosol Radiative Effects over Ascension Island Using LASIC Observations and MERRA-2

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. Finally, the observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site.

Collow, Allie↗

Spectral absorption of solar radiation in cloudy atmospheres A 20/cm model

A radiative transfer model based on both LOWTRAN transmission functions (at a 20/cm resolution), and Monte Carlo simulations of wavelength distributions, is used to determine the spectral absorption of solar radiation in typical water clouds. This yields the relative absorption by the vapor and droplets within each cloud. The results obtained indicate a slightly lower absorption than had previously been found, with boundary layer clouds typically absorbing 9 percent of the terrestrial insolation for an overhead sun. This absorption is strongly dependent on the presence of water vapor above the cloud top and solar zenith angle. Droplets, rather than vapor, are shown to be the dominant absorbers within the cloud except in the absence of water vapor above the cloud top.

Davies, R.↗

The Influence of Thermodynamic Phase on the Retrieval of Mixed-Phase Cloud Microphysical and Optical Properties in the Visible and Near Infrared Region

Cloud microphysical and optical properties are inferred from the bidirectional reflectances simulated for a single-layered cloud consisting of an external mixture of ice particles and liquid droplets. The reflectances are calculated with a rigorous discrete ordinates radiative transfer model and are functions of the cloud effective particle size, the cloud optical thickness, and the values of the ice fraction in the cloud (i.e., the ratio of ice water content to total water content). In the present light scattering and radiative transfer simulations, the ice fraction is assumed to be vertically homogeneous; the habit (shape) percentage as a function of ice particle size is consistent with that used for the Moderate Resolution Imaging Spectroradiometer (MODIS) operational (Collection 4 and earlier) cloud products; and the surface is assumed to be Lambertian with an albedo of 0.03. Furthermore, error analyses pertaining to the inference of the effective particle sizes and optical thicknesses of mixed-phase clouds are performed. Errors are calculated with respect to the assumption of a cloud containing solely liquid or ice phase particles. The analyses suggest that the effective particle size inferred for a mixed-phase cloud can be underestimated (or overestimated) if pure liquid phase (or pure ice phase) is assumed for the cloud, whereas the corresponding cloud optical thickness can be overestimated (or underestimated).

Lee, Joonsuk↗

Height Distribution Between Cloud and Aerosol Layers from the GLAS Spaceborne Lidar in the Indian Ocean Region

The Geoscience Laser Altimeter System (GLAS), a nadir pointing lidar on the Ice Cloud and land Elevation Satellite (ICESat) launched in 2003, now provides important new global measurements of the relationship between the height distribution of cloud and aerosol layers. GLAS data have the capability to detect, locate, and distinguish between cloud and aerosol layers in the atmosphere up to 40 km altitude. The data product algorithm tests the product of the maximum attenuated backscatter coefficient b'(r) and the vertical gradient of b'(r) within a layer against a predetermined threshold. An initial case result for the critical Indian Ocean region is presented. From the results the relative height distribution between collocated aerosol and cloud shows extensive regions where cloud formation is well within dense aerosol scattering layers at the surface. Citation: Hart, W. D., J. D. Spinhime, S. P. Palm, and D. L. Hlavka (2005), Height distribution between cloud and aerosol layers from the GLAS spaceborne lidar in the Indian Ocean region,

Hart, William D.↗

Multilayered Clouds Identification and Retrieval for CERES Using MODIS

Traditionally, analyses of satellite data have been limited to interpreting the radiances in terms of single layer clouds. Generally, this results in significant errors in the retrieved properties for multilayered cloud systems. Two techniques for detecting overlapped clouds and retrieving the cloud properties using satellite data are explored to help address the need for better quantification of cloud vertical structure. The first technique was developed using multispectral imager data with secondary imager products (infrared brightness temperature differences, BTD). The other method uses microwave (MWR) data. The use of BTD, the 11-12 micrometer brightness temperature difference, in conjunction with tau, the retrieved visible optical depth, was suggested by Kawamoto et al. (2001) and used by Pavlonis et al. (2004) as a means to detect multilayered clouds. Combining visible (VIS; 0.65 micrometer) and infrared (IR) retrievals of cloud properties with microwave (MW) retrievals of cloud water temperature Tw and liquid water path LWP retrieved from satellite microwave imagers appears to be a fruitful approach for detecting and retrieving overlapped clouds (Lin et al., 1998, Ho et al., 2003, Huang et al., 2005). The BTD method is limited to optically thin cirrus over low clouds, while the MWR method is limited to ocean areas only. With the availability of VIS and IR data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and MW data from the Advanced Microwave Scanning Radiometer EOS (AMSR-E), both on Aqua, it is now possible to examine both approaches simultaneously. This paper explores the use of the BTD method as applied to MODIS and AMSR-E data taken from the Aqua satellite over non-polar ocean surfaces.

Sun-Mack, Sunny↗

Airborne lidar observations of Arctic polar stratospheric clouds

Polar stratospheric clouds (PSC's) have been detected repeatedly during Arctic and Antarctic winters since 1978/1979 by the SAM II (Stratospheric Aerosol Measurement II) instrument aboard the NIMBUS-7 satellite. PSC's are believed to form when supercooled sulfuric acid droplets freeze, and subsequently grow by deposition of ambient water vapor as the local stratospheric temperature falls below the frost point. In order to study the characteristics of PSC's at higher spatial and temporal resolution than that possible from the satellite observations, aircraft missions were conducted within the Arctic polar night vortex in Jan. 1984 and Jan. 1986 using the NASA Langley Research Center airborne dual polarization ruby lidar system. A synopsis of the 1984 and 1986 PSC observations is presented illustrating short range spatial changes in cloud structure, the variation of backscatter ratio with temperature, and the depolarization characterics of cloud layers. Implications are noted with regard to PSC particle characteristics and the physical process by which the clouds are thougth to form.

Poole, L. R.↗

Multiwavelength scanning radiometer for airborne measurements of scattered radiation within clouds

A multi-wavelength scanning radiometer has been developed for measuring the angular distribution of scattered radiation deep within a cloud layer. The purpose of the instrument is to provide measurements from which the single scattering albedo of clouds can be derived as a function of wavelength. The radiometer has a 1-deg field of view and scans in the vertical plane from 5 deg before zenith to 5 deg past nadir (190 deg aperture). The thirteen channels of the cloud absorption radiometer are located between 0.5 and 2.3 microns and were selected to avoid the molecular absorption bands in the near-infrared. The first seven channels of the radiometer are simultaneously and continuously sampled, while the eighth registered channel is selected from among the six channels on a filter wheel. This paper describes the optical, mechanical and electrical design of the instrument and presents some early results obtained from measurements taken aboard the University of Washington's B-23 aircraft to illustrate the performance of the instrument.

King, Michael D.↗

Vertical aerosol structure of Neptune - Constraints from center-to-limb profiles

New center-to-limb (CTL) equatorial region profiles of Neptune have been extracted from spatially well-resolved images. The 8900-A CTL profile entails the presence of material above the 5-mbar level whose optical depth is less than 0.5. CH4-band data admit of thin scattering hazes in the 0.4-1.5 bar pressure level, although optical depths must be lower than 0.05; so thin a haze falls short of the reflected flux at 6340 A, thereby implying the presence of another scattering layer deeper than 1.5 bars. A good fit to the observed reflectivity is obtained by a bright cloud layer with an optical depth of 3.0.

Hammel, H. B.↗

Turbulence structure in clear and cloudy regions of the 7 July 1987 Electra mission

The 7 July mission of the 1987 FIRE Marine Stratocumulus Intensive Field Observations was chosen for analysis because of a well-defined transition from stratocumulus to clear conditions sampled by the aircraft on this day. It is hoped that by studying this case something can be learned about the processes responsible for the maintenance and breakup of stratocumulus layers, a primary objective of FIRE. The preliminary analysis is based on data from the Electra flight of this day. The properties of turbulence elements, i.e., updrafts and downdrafts, are examined to gain information on the nature of the turbulent exchanges through the boundary layer and across the inversion. Since such exchanges in large measure determine the stability and structure of cloud layers, a study of draft properties should be informative. The results will also be useful in the development of boundary layer models that are based on draft circulations (e.g., Randall, 1988; Hanson, 1988).

Khalsa, Siri Jodha Singh↗

Comparison of cloud boundaries measured with 8.6 mm radar and 10.6 micrometer lidar

One of the most basic cloud properties is location; the height of cloud base and the height of cloud top. The glossary of meteorology defines cloud base (top) as follows: 'For a given cloud or cloud layer, that lowest (highest) level in the atmosphere at which the air contains a perceptible quantity of cloud particles.' Our studies show that for a 8.66 mm radar, and a 10.6 micrometer lidar, the level at which cloud hydrometers become 'perceptible' can vary significantly as a function of the different wavelengths, powers, beamwidths and sampling rates of the two remote sensors.

Uttal, Taneil↗

Monte Carlo Radiative Transfer Modeling of Lightning Observed in Galileo Images of Jupiter

We study lightning on Jupiter and the clouds illuminated by the lightning using images taken by the Galileo orbiter. The Galileo images have a resolution of 25 km/pixel and axe able to resolve the shape of the single lightning spots in the images, which have full widths at half the maximum intensity in the range of 90-160 km. We compare the measured lightning flash images with simulated images produced by our ED Monte Carlo light-scattering model. The model calculates Monte Carlo scattering of photons in a ED opacity distribution. During each scattering event, light is partially absorbed. The new direction of the photon after scattering is chosen according to a Henyey-Greenstein phase function. An image from each direction is produced by accumulating photons emerging from the cloud in a small range (bins) of emission angles. Lightning bolts are modeled either as points or vertical lines. Our results suggest that some of the observed scattering patterns axe produced in a 3-D cloud rather than in a plane-parallel cloud layer. Lightning is estimated to occur at least as deep as the bottom of the expected water cloud. For the six cases studied, we find that the clouds above the lightning are optically thick (tau > 5). Jovian flashes are more regular and circular than the largest terrestrial flashes observed from space. On Jupiter there is nothing equivalent to the 30-40-km horizontal flashes which axe seen on Earth.

Dyudine, U. A.↗

Long-Term Trends in Aerosols, Low Clouds, and Large-scale Meteorology over the Western North Atlantic from 2003 to 2020

A continuous decrease of aerosol over the western North Atlantic Ocean (WNAO) on decadal timescales provides a long-term experiment to evaluate how other natural and anthropogenic processes affect the manifestation of aerosol-cloud interactions in this region. Furthermore, the WNAO is a natural laboratory with diverse aerosol sources, marine boundary layer clouds that are more variable than marine stratocumulus deck regions, and unique flow regimes set up by the Gulf Stream and semi-permanent Bermuda High. We investigate how satellite-retrieved macrophysical and microphysical properties of low clouds and the surface shortwave irradiance changed from 2003 to 2020, in tandem with this aerosol decrease. The decadal changes in large-scale meteorology relating to the North Atlantic Oscillation (NAO) are also examined. We find no significant changes in low-cloud fraction but a widespread reduction in low-cloud optical depth attributed to fewer and larger cloud droplets with almost no change in cloud liquid water path. Despite robust signals in low-cloud optical properties together with aerosol decrease, a corresponding increase in the surface shortwave irradiance trends, also called surface brightening, is lacking. This absence of brightening is potentially due to concomitant changes found in large-scale meteorology associated with NAO— a Bermuda High strengthening, sea surface warming, and atmospheric moistening— as well as an increase in high cloud fraction that can counteract the surface brightening. Ultimately, our findings suggest that spatial patterns in the decadal meteorological variability, likely set up by NAO, contribute more to the surface cloud radiative effect over the WNAO than aerosol-cloud interactions.

J Minnie Park↗

Evaluation of Low Altitude Cloud Amount Using CALIPSO Observations

Clouds strongly modulate the transfer of solar and thermal radiation within the atmosphere. Changes in the distribution and properties of clouds in a changing climate represent climate feedbacks affecting climate sensitivity, but the predicted responses of clouds from current climate models are inconsistent. Of particular concern is the response of low clouds, and it is recognized that proper representation of low clouds in global models is in need of improvement. Accurate satellite cloud climatologies are necessary to evaluate model performance, but existing climatologies require validation and are inadequate in some respects for model evaluation. CALIPSO and CloudSat have been acquiring high vertical resolution cloud profiles since launch in 2006. These global cloud datasets represent a new tool for evaluation of both models and existing satellite climatologies. While a recently available merged CALIPSO-CloudSat cloud climatology provides the most comprehensive view of global 3-D cloud distribution, the CALIPSO dataset set on its own has several unique characteristics, including profiles of the atmospheric boundary layer with 30 meter vertical resolution. In this paper we investigate the use of CALIPSO data to characterize boundary layer clouds, looking toward the development of a reliable global dataset suitable for evaluation of model performance.

Winker, Dave↗

Remote temperature sounding in the presence of cloud by zenith scanning

The principles of remote sounding of vertical temperature profiles in planetary atmospheres containing cloud layers are presented for an approach that uses measurements at different angles to the local vertical to eliminate the unknown cloud effects. A numerical example for a model of the earth's atmosphere shows that soundings separated by 40 deg in zenith angle permit the recovery of the temperature profile with an error that is not significantly greater than that obtained in the clear atmosphere case, and without serious horizontal smear. It is proposed that the method will be valuable for the interpretation of measurements made by instruments on spin-stabilized spacecraft on planetary missions, since in these cases the required angular coverage is obtained automatically for most trajectories.

Taylor, F. W.↗

On the determination of cloud cover from satellite sensors - The effect of sensor spatial resolution

The effect of sensor spatial resolution on satellite-derived estimates of cloud fractional coverage is quantified on the basis of Landsat satellite radiance data. Cloud fraction is found to depend on cloud algorithm as much as it depends on sensor spatial resolution. Even for 28.5-m spatial resolution data, large cloud fraction differences exist between algorithms. Satellite cloud retrieval algorithms depend strongly on sensor spatial resolution and/or on the optical depth of the cloud field. When present, spatial resolution effects are small (less than 0.01) for pixel diameter less than 1/4 km and are large for pixel diameter larger than 1 km. The International Satellite Cloud Climatology Project bispectral threshold gives an increase in cloud fraction of 0.11 as spatial resolution degrades from 20 m to 8 km. The spatial coherence algorithm underestimates boundary layer cloud fraction by 0.18. The use of functional box counting and an assumption of fractal scale invariance overestimates the dependence of cloud fraction for spatial scales below 1 km.

Wielicki, Bruce A.↗