SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Large array of small antennas can be used to enhance signals with very low signal-to-noise ratio and can also be used to replace large apertures. In this paper, a fast combining algorithm is proposed and analyzed to maximize the combined output signal-to-noise ratio.
This paper describes the design and performance of a brassboard astrometric beam combiner. The beam combiner was developed as part of the JPL Interferometry Technology Program (ITP). The purpose of this program is to test out design concepts in hardware that will eventually be used for the Space Interferometry Mission (SIM).
AERACEPT (AErosol Rapid Analysis Combined Entry Probe/sonde Technology) is an early-stage technology allowing a single aeroshell body to act as both an entry vehicle and aerosol-sampling passive descent sonde. AERACEPT does not require heat shield separation, deployable parachutes, or descent control, thus reducing the mass, volume, and complexity of planetary aerosol sampling. AERACEPT is particularly well suited for a Venus mission, where the particles of greatest interest are within the subsonic descent regime. AERACEPT uses the aeroshell’s own velocity to drive aerosol capture and separation through a series of embedded inlets. It takes advantage of recently developed thermal protection materials (3D-CC and HEEET) in combination with heritage aerosol sampling technologies from both planetary and airborne science (high-speed inlets and particle separation). The trade space for a given descent trajectory includes the particle capture efficiency for a given size, the bias introduced in the sampled particle size and concentration distributions, and the thermal alteration experienced by the particles during their brief exposure to the internal flow environment. AERACEPT is included in the Nephele mission concept study for a small spacecraft targeting the Venus middle and lower cloud layers. Nephele complements larger missions targeting Venus atmospheric gas analysis, such as DAVINCI and Venera-D, by specifically targeting cloud and haze particles. Because of the short lifetime of the probe in the lower atmosphere, Nephele requires a fast cadence of analysis of the captured particles, and includes the VOLTR dual optical spectrometer (SERS/LIBS) as part of its notional payload. Preliminary modeling based on the Nephele trajectory at 63 km to 39 km indicates AERACEPT can limit sample heating to 30-60 K above ambient. A modified particle tracking model has been implemented to estimate capture efficiency of particles larger than 0.1 µm and total sample volume as part of an inlet and interal flow path geometry trade study. Further modeling and empirical testing is underway to improve these estimates.
By applying multiple environmental stresses in fieldrepresentative combinations and sequences, combined-accelerated stress testing (CAST) identifies degradation modes and failure mechanisms of photovoltaic (PV) modules and components that are missed by single stress factor accelerated testing.
Activation, break-in, and/or pre-treatment protocols are generally applied to energy conversion devices before regular operation to reach stable performance. There remains much to understand about the relationships among physical properties, performance, and electrochemical pre-treatments. Here, a design-of-experiments (DoE) strategy is employed to address this gap by demonstrating the influence of five pre-treatment parameters for carbon-supported Pt-nanoparticle catalysts on the electrocatalytic oxygen reduction reaction (ORR). A subset of pre-treatments, developed using a central composite design, are tested in a flow cell combined with an inductively-coupled plasma mass spectrometer (on-line ICP-MS). The DoE-based approach facilitates comprehensive insights from two orders of magnitude fewer experiments than a conventional grid search. The coupled on-line ICP-MS setup enables effective catalysis and real-time catalyst dissolution data. Leveraging insights from DoE for on-line ICP-MS and additional characterization, a model is built between the degradation of a multi-dimensional supported Pt surface, its performance, and applied electrochemical parameters. These investigations identify surface modifications, such as oxidation, and subsequent restructuring of Pt during pre-treatment as a primary cause of performance deterioration during ORR. By combining DoE with advanced characterization techniques, a powerful approach is demonstrated to gain a mechanistic understanding of pre-treatment protocols that can be broadly adapted to various reaction chemistries.
Precision measurements of Higgs boson differential production cross sections are a key tool to probe the properties of the Higgs boson and test the standard model. New physics can affect both Higgs boson production and decay, leading to deviations from the distributions that are expected in the standard model. In this paper, combined measurements of differential spectra in a fiducial region matching the experimental selections are performed, based on analyses of four Higgs boson decay channels (γγ, ZZ$^{(*)}$, WW$^{(*)}$, and ττ) using proton-proton collision data recorded with the CMS detector at $ \sqrt{s}=13 $ TeV, corresponding to an integrated luminosity of 138 fb$^{−1}$. The differential measurements are extrapolated to the full phase space and combined to provide the differential spectra. A measurement of the total Higgs boson production cross section is also performed using the γγ and ZZ decay channels, with a result of $ {53.4}_{-2.9}^{+2.9}{\left(\textrm{stat}\right)}_{-1.8}^{+1.9}\left(\textrm{syst}\right) $ pb, consistent with the standard model prediction of 55.6 ± 2.5 pb. The fiducial measurements are used to compute limits on Higgs boson couplings using the κ-framework and the SM effective field theory.[graphic not available: see fulltext]
A combined statistical analysis of searches for heavy vector boson resonances decaying into pairs of W, Z, or Higgs bosons, as well as into quark pairs $\left(\mathrm{q}\overline{\mathrm{q}},\mathrm{b}\overline{\mathrm{b}},\mathrm{t}\overline{\mathrm{t}},\mathrm{t}\overline{\mathrm{b}}\right)$ or lepton pairs ℓ + ℓ – , ℓ$\bar{v}$, with ℓ = e, μ, τ, is presented. The results are based on proton-proton collision data at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb −1 , collected by the CMS experiment from 2016 to 2018. No significant deviation from the expectations of the standard model is observed. The results are interpreted in the simplified heavy vector triplet (HVT) framework, setting 95% confidence level upper limits on the production cross sections and on the coupling strengths of the HVT bosons to standard model particles. The results exclude HVT resonances with masses below 5.5 TeV in a weakly coupled scenario, below 4.8 TeV in a strongly coupled scenario, and up to 2.0 TeV in the case of production via vector boson fusion. The combination provides the most stringent constraints to date on new phenomena predicted by the HVT model.
Graph neural networks (GNN) have emerged as a promising machine learning method for microstructure simulations such as grain growth. However, accurate modeling of realistic grain boundary networks requires large simulation cells, which GNN has difficulty scaling up to. To alleviate the computational costs and memory footprint of GNN, we suggest a hybrid architecture combining a convolutional neural network (CNN) based bijective autoencoder to compress the spatial dimensions, and a GNN that evolves the microstructure in the latent space of reduced spatial sizes. Our results demonstrate that the new design significantly reduces computational costs with using fewer message passing layer (from 12 down to 3) compared with GNN alone. The reduction in computational cost becomes more pronounced as the spatial size increases, indicating strong computational scalability. For the largest mesh evaluated (160 3 ), our method reduces memory usage and runtime in inference by 117× and 115×, respectively, compared with GNN-only baseline. More importantly, it shows higher accuracy and stronger spatiotemporal capability than the GNN-only baseline, especially in long-term testing. Such combination of scalability and accuracy is essential for simulating realistic material microstructures over extended time scales. The improvements can be attributed to the bijective autoencoder’s ability to compress information losslessly from spatial domain into a high dimensional feature space, thereby producing more expressive latent features for the GNN to learn from, while also contributing its own spatiotemporal modeling capability. Training data are generated from stochastic grain growth simulations, providing realistic variability for learning robust microstructure evolution. Comprehensive system validation confirms that the model is accurate, robust, and scalable.
Latent heat thermal energy storage (LHTES) systems play a critical role in renewable energy integration by providing high energy density and nearly isothermal operation during phase transitions. However, their performance is often limited by slow melting/charging rates, which motivates the search for enhanced heat transfer designs. This study investigates the melting behavior of RT-82 phase change material (PCM) using novel lotus-shaped fins combined with copper metal foam and conductive graphene nanoparticles and carbon nanotubes. A two-dimensional enthalpy-porosity model in ANSYS Fluent was developed to simulate the charging/melting process, capturing non-thermal equilibrium between the foam and PCM/nano-PCM. In this study, effects of fin geometry, nanoparticle concentration, and foam porosity on melting dynamics and cost-performance trade-offs were investigated. Results showed that natural convection accelerated melting by ~12% compared to conduction-only scenarios. Optimized lotus-shaped fins with higher fin density (T3F4 and T3F10) achieved up to 63% faster melting relative to sparse configurations. Graphene nanoparticles improved thermal conductivity, with a 6% volume fraction, by reducing melting time by ~6.9%, while their combination with 75% porosity foam achieved a maximum reduction in the melting time of ~51% compared to pure PCM. Cost-performance analysis identified T3F4 as the most balanced design, offering rapid thermal response without excessive material costs, while moderate-density designs like T3S6 provided economical alternatives with acceptable performance. These results highlight the performance enhancement that can be achieved by integrating bio-inspired fins, nanoparticles, and foams, into compact and efficient LHTES for solar heating, building thermal management, and industrial waste-heat recovery applications.
A statistical combination of various searches for pair-produced leptoquarks is presented, using the full LHC Run 2 (2015–2018) data set of 139 fb -1 collected with the ATLAS detector from proton–proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV. All possible decays of the leptoquarks into quarks of the third generation and charged or neutral leptons of any generation are investigated. Since no significant deviations from the Standard Model expectation are observed in any of the individual analyses, combined exclusion limits are set on the production cross-sections for scalar and vector leptoquarks. The resulting lower bounds on leptoquark masses exceed those from the individual analyses by up to 100 GeV, depending on the signal hypothesis.
A combination of searches for singly and doubly charged Higgs bosons, H ± and H ±± , produced via vector-boson fusion is performed using 140 fb -1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, collected with the ATLAS detector during Run 2 of the Large Hadron Collider. Searches targeting decays to massive vector bosons in leptonic final states (electrons or muons) are considered. New constraints are reported on the production cross-section times branching fraction for charged Higgs boson masses between 200 GeV and 3000 GeV. The results are interpreted in the context of the Georgi-Machacek model for which the most stringent constraints to date are set for the masses considered in the combination.
As the needs for the nuclear energy industry continue to evolve in the 21st century, timely adoption of new technological solutions acceptable to regulatory agencies is critical. Quantitative prediction of radiation damage in materials and its impact on mechanical properties is a key component of licensing and regulatory decisions regarding nuclear power plants. Accelerated testing methodologies such as combined ion and neutron irradiation data sets are crucial for the development and deployment of new materials and new manufacturing methods (e.g., additive manufacturing). However, regulatory acceptance of accelerated testing methodologies is necessary for their adoption. Further, the present work discusses the fundamental basis for comparing ion- and neutron-induced material microstructures, the theory behind interpreting radiation damage across length and time scales and radiation types, and the codes, standards, and quality assurance concerns surrounding different modeling methods and software. In particular, recommendations are given as to the path forward that will enable national laboratories, academia, and industry to develop the modeling and software basis for regulatory acceptance of the combined use of ion and neutron irradiation for material performance evaluation.
Global CO 2 emissions are increasing at about a 1.5% rate per year. Fossil fuel-based plants are one of the main contributors to this rise. In the power generation industry, fossil fuel plants are dominant, and many plants are under development. In this study, a natural gas combined cycle (NGCC) power plant with postcombustion capture using a leading water-lean solvent is considered. For optimal design and operating schedule, large-scale dynamic optimization is undertaken for net present value (NPV) optimization. The first principle dynamic model of NGCC is developed, including a model of the highly efficient H-class gas turbines. For computational tractability of the dynamic optimization problem, a reduced-order model is developed by using the Hankel singular value decomposition. A waterlean solvent, N-(2-ethoxyethyl)-3-morpholinopropan-1-amine, is used for carbon capture. A model of the capture system is developed in Aspen Plus, which is used to develop a reduced-order model by using ALAMO, a machine learning software. In addition, a reduced model of the CO 2 compression system with a dehydration unit is also considered. The integrated system is used for NPV optimization by using the Python-based PYOMO platform. The PCC process is analyzed for three configurations-conventional packed bed, rotating packed bed (RPB), and a combination of RPB and direct contact cooler. The NPV optimization is performed for 14 regional markets by considering year-long clustered and continuous locational marginal price data with a 1 h interval. Optimization results show that the PCC can achieve 90% CO 2 capture with a positive NPV for six regions. Sensitivity studies conducted by using the PCC configurations indicate that the process is economically feasible for 9 regions out of 14 regional electricity markets with NPV values in the range of 33−540 $MM.
Degradation via sintering is an ongoing challenge that impedes the broad commercial success of supported metallic nanoparticle catalysts. To mitigate degradation via informed catalyst design and process operations, here we aim to disambiguate the underlying mechanisms of sintering by combining theory and experiment in a quantitative framework. While mechanistic sintering models exist, they only model a single sintering pathway, even though multiple sintering mechanisms can occur simultaneously or dominate at different stages of the process. Data-driven machine learning models have emerged as a means to represent complex processes through data regression. However, machine learning models have very large data needs and lack mechanistic insights due to their black-box encoding. To develop an interpretive model of catalyst degradation via sintering, we constructed a hybrid model combining mechanistic “physics-based” models and data-driven methods to obtain both reliable predictions and mechanistic insights regarding experimentally observed sintering phenomena. Focusing on nanoparticle sintering in the Rh–TiO 2 catalyst for the reverse water–gas shift (RWGS) reaction, the hybrid model couples a mechanistic term for Ostwald ripening with energy values calculated via density functional theory (DFT) with a parametric, data-driven discrepancy function term for unmodeled mechanisms. The hybrid model is trained using Bayesian inference with data collected from small-angle X-ray scattering (SAXS) in situ experiments wherein average nanoparticle diameter versus time was measured at three relevant operating temperatures. The calibrated hybrid model results show that an Ostwald ripening-only model parameterized with fixed DFT energies does not fully capture the time and temperature dependence of the SAXS-observed sintering kinetics, and that an additional functional contribution, or DFT energy calibration, is required to reconcile simulation and experiment. Analysis of the hybrid-model error confirms that the hybrid model outperforms both the purely mechanistic and purely data-driven alternatives in terms of expected predictive accuracy for time-evolving average particle sizes. Furthermore, the results support the hypothesis that the Ostwald ripening mechanism is less important for explaining the sintering phenomena as operating temperature increases under an assumed fixed DFT parameterization. This could be explained in one of two ways: either latent, unmodeled sintering mechanisms dominate at higher temperatures, or the DFT uncertainty increases with temperature. The proposed modeling approach directly links theory to experiments and simulations via a statistical hybrid modeling framework and can be extended to other catalytic systems to improve predictive models and mechanistic understanding.
In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.
Because mixed-halide wide-bandgap (1.6-2.0 eV) perovskite solar cells suffer from operating instability related to light-induced halide segregation, it is of interest to study alternative means of bandgap widening. Perovskitoids combine wide bandgaps and structural stability resulting from face- or edge-sharing octahedral connections in their crystal structures. Unfortunately, there existed no prior reports of three-dimensional (3D) perovskitoids having direct bandgaps with optical absorption edges less than 2.2 eV. As the most significant predictor of perovskitoid bandgaps is the fraction of corner-sharing in their crystal structures, we hypothesized that increasing the amount of corner-sharing would access lower bandgaps than previously reported. Here, we accomplished this by mixing a spacer cation within the size range for 3D perovskitoid formation with a smaller perovskite-forming cation. We explored three spacer cations of different sizes: ethylammonium (EA), cyclopropylammonium (c-C3A), and cyclobutylammonium (c-C4A), combining these with methylammonium (MA), and found that the middle cation, c-C3A, pairs with MA to form a 3D perovskitoid with the formula (c-C3A) 3 (MA) 3 Pb 5 I 16 and a direct bandgap with an optical absorption edge at 2.0 eV. Solution-processed films of this perovskitoid showed improved light stability over mixed-halide perovskites, and solar cells based on these films exhibit increased maximum power point operating stability compared to reference mixed-halide devices.
Immunizing mice with Crimean-Congo hemorrhagic fever virus (CCHFV) nucleoprotein (NP), glycoprotein precursor (GPC), or with the GP38 domain of GPC, can be protective when the proteins are delivered with viral vectors or as a DNA or RNA vaccine. Subunit vaccines are a safe and cost-effective alternative to some vaccine platforms, but Gc and Gn glycoprotein subunit vaccines for CCHFV fail to protect despite eliciting high levels of neutralizing antibodies. Here, we investigated humoral and cellular immune responses and the protective efficacy of recombinant NP, GP38, and GP38 forms (GP85 and GP160) associated with the highly glycosylated mucin-like (MLD) domain, as well as the NP + GP38 combination. Vaccination with GP160, GP85, or GP38 did not confer protection, and vaccination with the MLD-associated GP38 forms blunted the humoral immune responses to GP38, worsened clinical chemistry, and increased viral RNA in the blood compared to the GP38 vaccination. In contrast, NP vaccination conferred 100% protection from lethal outcome and was associated with mild clinical disease, while the NP + GP38 combination conferred even more robust protection by reducing morbidity compared to mice receiving NP alone. Thus, recombinant CCHFV NP alone is a promising vaccine candidate conferring 100% survival against heterologous challenge. Moreover, incorporation of GP38 should be considered as it further enhances subunit vaccine efficacy by reducing morbidity in surviving animals.
With the expected data volume increase for HL-LHC and the even more complex computing challenges set by future colliders, the need for efficient data storage and processing becomes more pressing. ROOT’s next-generation data format and I/O subsystem, RNTTuple, is designed to address these challenges. RNTTuple already demonstrates a clear improvement in storage and I/O efficiency, as well as overall stability and robustness with respect to its predecessor, TTTree. These improvements provide a solid baseline to introduce novel extensions to common high-energy and nuclear physics (HENP) workflows. Notably, many workflows could benefit from the ability to arbitrarily join and chain data set samples at runtime, which could reduce overall storage requirements and improve application runtime and ergonomics. In this paper, we present the RNTupleProcessor, which enables HENP data set combinations with RNTuple. We will discuss the main design considerations, present the interfaces to support data set combinations and show how they integrate in typical workflows.