Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conjunction Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Non-steady State Effects in EHL

A number of lubricated machine elements are subjected to cyclic variations of load and speed, particularly in reciprocating machinery. It is well known that squeeze-film action plays an important role in preserving satisfactory lubricating films in many cases in which the entraining velocities fall to zero during each cycle, as in the reciprocating seal and synovial joints. The essential features of combined 'entraining' and 'normal' motion are described for both hydrodynamic and elastohydrodynamic conditions. It is shown that very small squeeze-film velocities (W), or order (h(sub o)/l)U, can lead to substantial hydrodynamic action. A brief review of previous studies of squeeze-film lubrication between spheres or cylinders and a plane is followed by reference to a recent analysis of ankle joint lubrication. It is then shown that elastohydrodynamic lubrication might be encountered in the conjunction between a piston ring and cylinder liner and that in such cases combined entraining and squeeze-film action is important. Analysis of a 2-stroke Diesel engine shows that variations in squeeze-film velocity throughout the conjunction, associated with time rates of change of elastic deformation, must be considered in a full elastohydrodynamic lubrication analysis.

Duncan Dowson↗
NASA NTRS1985

Development of the variational SEASAT data analysis technique

Surface winds are closely associated with the surface pressure gradient. The variational SEASAT data analysis technique was designed to improve the sea level pressure analysis in the data sparse areas. The SEASAT-derived surface wind data were compared with observations from the Joint Air Sea Interaction Experiment (JASIN) and it was found that the satellite-derived sea surface wind has an accuracy of up to + or - 2 m/s in speed and + or - 20 deg in direction. These numbers are considered characteristic of the retrieved SEASAT wind field. By combining the densely spaced SEASAT-derived wind data with the sparsely distributed sea-level pressure observation via a variational adjustment technique subject to some appropriate physical constraint(s), an improvement in the sea-level pressure analysis is expected. It is demonstrated that a simple marine boundary layer scheme in conjunction with a variational adjustment technique can be developed to help improve the sea-level pressure analysis by the SEASAT-derived wind of a limited-area domain in the ocean.

Sasaki, Y. K.↗
NASA NTRS1984

Burner liner thermal/structural load modelling

A serious problem exists interfacing the output temperatures and temperature gradients from either the heat transfer codes or engine tests with the input to stress analysis codes. A thermal load transfer code was developed and was used in conjunction with a three-dimensional model of a combustor liner for verification. The 3D heat transfer and stress analysis models of combustor liners and turbine blades were used to validate the mapped temperature produced by the transfer module. Verification cases were made for both finite element and finite difference heat transfer codes. A user manual for the code was written and is available.

Maffeo, R. J.↗
NASA NTRS1975

Remote sensing inputs to water demand modeling

In an attempt to determine the ability of remote sensing techniques to economically generate data required by water demand models, the Geography Remote Sensing Unit, in conjunction with the Kern County Water Agency of California, developed an analysis model. As a result it was determined that agricultural cropland inventories utilizing both high altitude photography and LANDSAT imagery can be conducted cost effectively. In addition, by using average irrigation application rates in conjunction with cropland data, estimates of agricultural water demand can be generated. However, more accurate estimates are possible if crop type, acreage, and crop specific application rates are employed. An analysis of the effect of saline-alkali soils on water demand in the study area is also examined. Finally, reference is made to the detection and delineation of water tables that are perched near the surface by semi-permeable clay layers. Soil salinity prediction, automated crop identification on a by-field basis, and a potential input to the determination of zones of equal benefit taxation are briefly touched upon.

Estes, J. E.↗
NASA NTRS1975

Estimating maximum instantaneous distortion from inlet total pressure rms and PSD measurements

An inexpensive method is developed to determine the extreme values of instantaneous inlet distortion. This method also provides insight into the basic mechanics of unsteady inlet flow and the associated engine reaction. The analysis is based on fundamental fluid dynamics and statistical methods to provide an understanding of the turbulent inlet flow and quantitatively relate the rms level and power spectral density (PSD) function of the measured time variant total pressure fluctuations to the strength and size of the low pressure regions. The most probable extreme value of the instantaneous distortion is then synthesized from this information in conjunction with the steady state distortion. Results of the analysis show the extreme values to be dependent upon the steady state distortion, the measured turbulence rms level and PSD function, the time on point, and the engine response characteristics. Analytical projections of instantaneous distortion are presented and compared with data obtained by a conventional, highly time correlated, 40 probe instantaneous pressure measurement system.

Melick, H. C., Jr.↗
NASA NTRS1972

Examination of UC-ZrC after long term irradiation at thermionic temperature

Two fluoride tungsten clad UC-ZrC fueled capsules, designated as V-2C and V-2D, were examined a hot cell after irradiation in NASA Plum Brook Reactor at a maximum cladding temperature of 1930 K for 11,089 and 12,031 hours to burnups of 3.0 x 10 to the 20th power and 2.1 x 10 to the 20th power fission/c.c. respectively. Percentage of fission gas release from the fuel material was measured by radiochemical means. Cladding deformation, fuel-cladding interaction and microstructures of fuel, cladding, and fuel-cladding interface were studied metallographically. Compositions of dispersions in fuel, fuel matrix and fuel-cladding interaction layer were analyzed by electron microprobe techniques. Axial and radial distributions of burnup were determined by gamma-scan, autoradiography and isotopic burnup analysis. The results are presented and discussed in conjunction with the requirements of thermionic fuel elements for space power application.

Yang, L.↗
NASA NTRS1975

Three-dimensional finite element analysis for high velocity impact

A finite element algorithm for solving unsteady, three-dimensional high velocity impact problems is presented. A computer program was developed based on the Eulerian hydroelasto-viscoplastic formulation and the utilization of the theorem of weak solutions. The equations solved consist of conservation of mass, momentum, and energy, equation of state, and appropriate constitutive equations. The solution technique is a time-dependent finite element analysis utilizing three-dimensional isoparametric elements, in conjunction with a generalized two-step time integration scheme. The developed code was demonstrated by solving one-dimensional as well as three-dimensional impact problems for both the inviscid hydrodynamic model and the hydroelasto-viscoplastic model.

Chan, S. T. K.↗
NASA NTRS1976

Simulating an aerospace multiprocessor

The paper describes a simulator which was used to evaluate the architecture of an aerospace multiprocessor. The simulator models interactions among the processors, memories, the central data bus, and a possible 'job stack'. Special features of the simulator are discussed, including the use of explicitly coded and individually distinguishable 'job models' instead of a statistically defined 'job mix' and a specialized Job Model Definition Language to automate the detailed coding of the models. Some results are presented which show that when the simulator was employed in conjunction with queuing theory and Markov-process analysis, more insight into system behavior was obtained than would have been with any one technique alone.

Mallach, E. G.↗
NASA NTRS1976

Titanium and advanced composite structures for a supersonic cruise arrow wing configuration

Structural design studies were made, based on current technology and on an estimate of technology to be available in the mid 1980's, to assess the relative merits of structural concepts and materials for an advanced arrow wing configuration cruising at Mach 2.7. Preliminary studies were made to insure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, and define an efficient structural arrangement. Material and concept selection, detailed structural analysis, structural design and airplane mass analysis were completed based on current technology. Based on estimated future technology, structural sizing for strength and a preliminary assessment of the flutter of a strength designed composite structure were completed. An advanced computerized structural design system was used, in conjunction with a relatively complex finite element model, for detailed analysis and sizing of structural members.

Turner, M. J.↗
NASA NTRS1982

Estimates of crater size for large-body impact Gravity-scaling results

A scaling analysis based upon dimensional invariance is used in conjunction with centrifuge experiments to estimate cratering efficiency as a function of impact velocity for kilometer-sized impactors. Complementing earlier, conventional small-scale impact experiments, centrifuge experiments were performed to substantiate these scaling laws in a scaled-size regime of interest. This technique provided empirical scaling laws used to estimate crater size for large bodies impacting the earth. From these scaling laws a 10-km-diameter body impacting at 25 km/s would be expected to produce a 66-km-diameter crater and to inject approximately 12 times its mass into the atmosphere.

Schmidt, R. M.↗
NASA NTRS1986

Analytical electron microscopy of Mg-SiO smokes - A comparison with infrared and XRD studies

Analytical electron microscopy conducted for Mg-SiO smokes (experimentally obtained from samples previously characterized by IR spectroscopy) indicates that the microcrystallinity content of unannealed smokes increases with increased annealing for up to 30 hr. The growth of forsterite microcrystallites in the initially nonstoichiometric smokes may give rise to the contemporaneous growth of the SiO polymorph tridymite and MgO; after 4 hr of annealing, these react to form enstatite. It is suggested that XRD analysis and IR spectroscopy should be conducted in conjunction with detailed analytical electron microscopy for the detection of emerging crystallinity in vapor-phase condensates.

Rietmeijer, F. J. M.↗
NASA NTRS1989

Autonomous onboard navigation using tracking and data relay satellite system (TDRSS) signals

Analyses have indicated that the NASA Tracking and Data Relay Satellite System (TDRSS) can furnish its orbital users accurate, low cost onboard navigation services via two different modes: (1) Forward-Link Scheduled Tracking, designated 'Block-I', and (2) Forward-Link Beacon Tracking, designated 'Block II'. Attention is presently given to the Block-I and Block-II system configurations, signal definition, and observation data descriptions. Projected accuracies for orbit-determination, time-determination, and frequency-determination are presented, in conjunction with user-navigation scenarios and covariance analysis results detailing error sources and magnitudes. The status of the two navigation service modes in both TDRSS and Advanced TDRSS is noted.

Engel, Cheryl↗
NASA NTRS1991

X-ray emission from hybrid-chromosphere stars

The observations of hybrid stars made by the Exosat X-ray satellite are considered, and emphasis is placed on the hybrid star alpha TrA. Attention is focused on the determination of the column density of IS hydrogen toward the stars in order to interpret X-ray observations of stellar coronal emission. The coronal properties of alpha TrA are discussed as well as implications of the general coronal properties of hybrid stars. An analysis of the X-ray data, in conjunction with transition region properties of the star, shows that the X-ray emitting plasma is likely to have a temperature of at least 10 to the 6th K. The X-ray luminosity of the star is calculated to be about 5 x 10 to the 29th ergs/s over the 1-300 A spectral region and 7 x 10 to the 28th ergs/s in the 0.2-4 keV energy range for N(H) = 5 x 10 to the 19th /sq cm and a temperature of 10 to the 6th K.

Brown, Alexander↗
NASA NTRS1993

Space transfer vehicle concepts and requirements. Volume 4: Summary of special studies

Our final report for Phase 1 addressed the future space transportation needs and requirements based on the current assets, at the time, and their evolution through technology/advanced development using a path and schedule that supported the world leadership role of the United States in a responsible and realistic financial forecast. Always, and foremost, the recommendations placed high values on the safety and success of missions both manned and unmanned through a total quality management philosophy at Martin Marietta. The second phase of the STV contract involved the use of Technical Directives (TD) to provide short-term support for specialized tasks as required by the COTR. Three of these tasks were performed in parallel with Phase 1. These tasks were the Liquid Acquisition Experiment (LACE), Liquid Reorientation Experiment (LIRE), and Expert System for Design, Operation, and Technology Studies (ESDOTS). The results of these TD's were reported in conjunction with the Phase 1 Final Report. Cost analysis of existing launch systems has demonstrated a need for a new upper stage that will increase America's competitiveness in the global launch services market. To provide a growth path of future exploration class STV's, near-term low-cost upper stages featuring modularity, portability, scalability, and evolvability must be developed. These recommendations define a program that: leverages ongoing activities to establish a new development environment, develop technologies that benefit the entire life cycle of a system, and result in a scalable hardware platform that provides a growth path to future upper stages.

Source record↗
NASA NTRS1997

Sub-Surface Soil Sampling with Penetrators

This paper summarizes the techniques currently under study at the Jet Propulsion Laboratory for using micro-penetrators to sample subsurface soil and perform analysis on that sample. The work is in conjunction with the New Millennium Mars Microprobe Program (or Deep Space-2), a four kilogram micro-penetrator that will arrive at Mars in December 1999.

Soil Sampling micro-penetrators subsurface soil pe↗
NASA NTRS2006

The X-ray Emitting Components towards l = 111 deg: The Local Hot Bubble and Beyond

We have obtained an XMM-Newton spectrum of the diffuse X-ray emission towards (l, b) = (111.14,1.11), a line of sight with a relatively simple distribution of absorbing clouds; > 9 x 10(exp 19)/sq cm at R>170 pc, a 6 x 10(exp 21)/sq cm molecular cloud at 2.5-3.3 kpc, and a total column of 1.2 x 10(exp 22)/sq cm. We find that the analysis of the XMM-Newton spectrum in conjunction with the RASS spectral energy distribution for the same direction requires three thermal components to be well fit: a "standard" Local Hot Bubble component with kT = 0.089, a component beyond the molecular cloud with kT = 0.59, and a component before the molecular cloud with kT = 0.21. The strength of the O VII 0.56 keV line from the Local Hot Bubble, 2.1+/-0.7 photons/sq cm/s/sr, is consistent with other recent measures. The 0.21 keV component has an emission measure of 0.0022+/-0.0006 pc and is not localized save as diffuse emission within the Galactic plane; it is the best candidate for a pervasive hot medium. The spatial separation of the approx. 0.2 keV component from the approx. 0.6 keV component suggests that the spectral decompositions of the emission from late-type spiral disks found in the literature do represent real temperature components rather than reflecting more complex temperature distributions.

Kuntz, K. D.↗
NASA NTRS2018

CA Risk Assessment Approaches

Current single-Pc approach work well when subtended by appropriate hypothesis-testing framework. Reframing construct in terms of miss distance distribution would confer certain advantages such as reducing to same import as Pc, but still convey some additional information. Methods to incorporate known uncertainties in covariances and HBR should be pursued that can also be framed in terms of miss distance distribution. We present Plausibilistic II and Possibilistic constructs, to determine their adequacy and viable recommendation.

Conjunction↗
NASA NTRS2018

Quantifying Shortcomings in the 2-D Pc Calculation

The probability of collision, Pc, between two Earth-orbiting satellites can often, but not always, be approximated adequately using the "2D-Pc" formulation. The objective is to find a set of "boundary conditions" that ensure the 2D-Pc approximation be sufficiently accurate, so that it may be determined when computationally-intensive Brute Force Monte Carlo1 (BFMC) Pc estimates are required. We critically examine the assumptions used in the formulation of the 2D-Pc approximation and then formulate 2D-Pc boundary condition tests to check if these assumptions are satisfied adequately.

Analysis↗