Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cross Section Measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Advancements in Validation of TSLs through Inelastic Neutron Scattering and Transmission Measurements [Abstract]

Historically, the free gas approximation has been used to treat the thermal scattering of neutrons with energies below a few electron-volts (eV) in unevaluated materials. However, this method inadequately reproduces neutron scattering at these energies. Until recently, only a limited number of materials had available thermal scattering law (TSL) files/libraries in the ENDF nuclear data libraries in this energy range. With advancements in atomistic modeling techniques, such as molecular dynamics, ab-initio molecular dynamics, and density functional theory, TSL libraries have become available for many more materials. This is particularly relevant due to the rising interest in several advanced reactor systems that require novel moderator and reflector materials. While quasi-integral and integral benchmarks have been designed to validate historically important moderator materials (such as light water and polyethylene), there is currently a lack of standard validation methods for TSLs, especially when multiple conflicting TSLs exist. To address this issue, the Oak Ridge National Lab Nuclear Data group has been working on utilizing inelastic neutron scattering (INS) measurements combined with transmission (i.e., total cross section) measurements to evaluate and validate TSLs for different materials. We plan to demonstrate how this method has worked on materials such as polyethylene, lucite, and polystyrene. In addition, we will compare the newly created libraries to ENDF libraries for these materials and explain why integral benchmarks should not be used for validation when multiple TSLs exist.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Measurement of boosted Higgs bosons produced via vector boson fusion or gluon fusion in the H →$ \textrm{b}\overline{\textrm{b}} $ decay mode using LHC proton-proton collision data at $ \sqrt{s} $ = 13 TeV

A measurement is performed of Higgs bosons produced with high transverse momentum (p$_{T}$) via vector boson or gluon fusion in proton-proton collisions. The result is based on a data set with a center-of-mass energy of 13 TeV collected in 2016–2018 with the CMS detector at the LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. The decay of a high-p$_{T}$ Higgs boson to a boosted bottom quark-antiquark pair is selected using large-radius jets and employing jet substructure and heavy-flavor taggers based on machine learning techniques. Independent regions targeting the vector boson and gluon fusion mechanisms are defined based on the topology of two quark-initiated jets with large pseudorapidity separation. The signal strengths for both processes are extracted simultaneously by performing a maximum likelihood fit to data in the large-radius jet mass distribution. The observed signal strengths relative to the standard model expectation are $ {4.9}_{-1.6}^{+1.9} $ and $ {1.6}_{-1.5}^{+1.7} $ for the vector boson and gluon fusion mechanisms, respectively. A differential cross section measurement is also reported in the simplified template cross section framework.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Measurements of production cross sections of the Higgs boson in the four-lepton final state in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $

Production cross sections of the Higgs boson are measured in the H $\to$ ZZ $\to$ $4\ell$ ($\ell$ $=$ e, $\mu$) decay channel. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV, collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137 fb$^{-1}$ is used. The signal strength modifier $\mu$, defined as the ratio of the Higgs boson production rate in the $4\ell$ channel to the standard model (SM) expectation, is measured to be $\mu$ $=$ 0.94 $\pm$ 0.07 (stat) ${}^{+0.09}_{-0.08}$ (syst) at a fixed value of $m_H$ = 125.38 GeV. The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H $\to$ $4\ell$ process is measured to be 2.84 $^{+0.23}_{-0.22}$ (stat) ${}^{+0.26}_{-0.21}$ (syst) fb, which is compatible with the SM prediction of 2.84 $\pm$ 0.15 fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Investigation of the Role of the Role of Nuclear Physics in Heavy Element Nucleosynthesis, through the Study of Key Reactions, and the Improvement of Theoretical Reaction Rates (Final Report)

Neutrino-driven winds in core-collapse supernovae have been identified as a possible site for the production of elements heavier than iron. Traditionally, these neutrino-driven winds have been proposed as the site of the main r-process. Recent simulations fail to reproduce the conditions required for the main r-process. while they remain a promising site for producing the lightest elements beyond iron, e.g., Sr, Y, and Zr through the νp process. The efficiency of the νp process depends on the hydrodynamical conditions, the electron fraction (which is related to the neutrino properties), and the nuclear reactions on many short-lived nuclei with limited (if at all) experimental information. The reaction rates on these nuclei are based on theoretical predictions using the Hauser-Feshbach model. Recent sensitivity studies have highlighted the importance of neutron-induced reactions on these nuclei along the νp process path. This work aimed to experimentally constrain reaction rates that are known to play a key role in the neutrino-p process nucleosynthesis. A secondary subsequently-added objective was to start the implementation of techniques that improve the description of nuclear properties in the Hauser-Feshbach model by extending the microscopic nuclear level density description offered via the shell model to high excitation energies without using experiment-based renormalizations. The main objective of this work was the experimental constraint of the 56 Ni(n,p) 56 Co reaction rate via a measurement of the inverse reaction 56 Co(p,n) 56 Ni at the National Superconducting Cyclotron Laboratory (NSCL) and later the Facility for Rare Isotope Beams (FRIB). This reaction is considered the key one for determining the yields possible by the neutrino-p process. A technique for this type of measurement in inverse kinematics at low energies did not exist before this work. The work also had two secondary objectives. First, to contribute to efforts to measure the same reaction in direct kinematics using a radioactive target at Los Alamos National Laboratory (LANL), and second, to advance work to implement shell-model-deduced microscopic level densities in Hauser-Feshbach calculations. The project has resulted in the development of the first technique to perform (p,n) cross-section measurements in relevant-for-astrophysics low energies in inverse kinematics using a magnetic spectrometer or separator, and neutron detectors for neutron tagging. It has also resulted in the precise measurement of the cross-section of the 40 Ar(p,n) 40 K reaction in a proof-of-principle experiment realized by using a beam-line quadrupole of the ReA3 accelerator of NSCL/FRIB. As part of this project the technique was successfully adapted to make use of the superior acceptance of the Separator for Capture Reactions (SECAR) at FRIB. In this project, the required experimental setup simulations and beam optics were developed and tested with the measurement of the 58 Fe(p,n) 58 Cu reaction cross-section. Additionally, this project contributed with simulation work to the development of a technique to measure (n,p) reactions with radioactive targets at LANL, and which resulted in the measurement of the key 56 Ni(n,p) 56 Co reaction cross-section at neutron energies above ≈1 MeV. Last, the project initiated work in the development of shell model based level densities using the moments method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1984

Absolute OH absorption cross sections (for lidar measurements)

Experimental data are employed to calculate absorption cross sections for several rotational lines in the OH A-X system. The cross sections are computed as functions of the spectral and line widths and temperature of a laser beam, and account for lifetimes and branching ratios. Detection limits for the P1(2) transition of the (1,0) band were examined. The oscillator strengths and cross-sections obtained are important for quantifying OH concentrations in the stratosphere from lidar return signals.

Mcgee, T. J.↗
DOE OSTI2020

SRF Resonators for a bi-directional Energy Ramping Upgrade of the Isotope Production Facility Beamline at LANL

The LANL Isotope Production Facility (IPF) is one of the two high-current proton linear accelerators operated under the auspices of the DOE Office of Nuclear Physics Isotope Development and Production for Research Applications Program. The IPF beamline operates with a fixed 100-MeV energy proton beam, diverted from the LANSCE accelerator and guided towards the isotope production target station. The fixed beam energy limits the number of isotopes that can be produced at IPF, and adversely affects the purity of isotopes produced at non-optimal energies. In particular, the IPF program is receiving increasing numbers of requests for high purity isotopes such as Np-236 (national security applications) and Re-186 (medical therapy). These are typically produced via (p,n) and (p,2n) nuclear reactions, requiring very tight control of the incident energies on the production targets to ensure an end product with a high radionuclidic purity. It is well known that this level of energy control cannot be achieved when a 100 MeV beam of mono-energetic protons is degraded to the required energies, typically below 30 MeV, as too much energy spread is acquired. Operating the IPF beamline at lower, mono-energetic beam energies such as at 40 MeV will allow the required tight energy control in target assemblies to ensure a high purity product. In addition, NP has requested a LANL/BNL/ORNL collaboration focus on establishing a national large-scale production capability for the therapy isotope Ac-225. Recent nuclear cross section measurements done at LANL show that due to a steep rise in production cross section towards higher proton energies (See Figure 2), proton beams at energies substantially greater than 100 MeV will be highly beneficial for Ac-225 production [AC255]. Such higher-energy beams cannot be delivered to IPF at present. Lower-energy beams (70 MeV and 40 MeV) can be delivered but only in sole-use mode; all other LANSCE users must be offline during 70 MeV or 40 MeV operation.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1985

The ionization of atomic oxygen by electron impact

Single and double ionization of atomic oxygen by electron impact has been studied experimentally. The energy dependence of the specific ionization cross sections sigma(O+) and sigma(O2+) has been measured in the energy range 40-300 eV using a high-density atomic oxygen source not contaminated by metastable O(D-1) or O(S-1) atoms. The ratios of the measured cross sections to absolute values are given in a table.

Zipf, E. C.↗
DOE OSTI2020

Thermal Neutron Scattering Law Benchmark and Validation at NCSU [Slides]

The presentation discusses how the NCSU graphite SDT ORELA experiment is under development as a benchmark. It discusses the testing of various ENDF/B-VII.1 and ENDF/B-VIII.0 graphite libraries that have been performed using the PROTEUS benchmark. The presentation demonstrates that the NSCU Polyethylene ENDF/B-VIII.0 TSL improves agreement with total cross section measurements. The presentation concludes by stating that the NCSU single crystal sapphire TSL library is based on realistic data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of the cross section of $$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ at center-of-mass energies between 3.510 and 4.843 GeV

Abstract Usinge + e − collision data corresponding to a total integrated luminosity of 12.9 fb −1 collected with the BESIII detector at the BEPCII collider, the exclusive Born cross sections and the effective form factors of the reaction$$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ e + e − → Ξ − Ξ ¯ + are measured via the single baryon-tag method at 23 center-of-mass energies between 3.510 and 4.843 GeV. Evidence for the decay$$ \psi (3770)\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ ψ 3770 → Ξ − Ξ ¯ + is observed with a significance of 4.5σby analyzing the measured cross sections together with earlier BESIII results. For the other charmonium(-like) statesψ(4040),ψ(4160),Y(4230),Y(4360),ψ(4415), andY(4660), no significant signal of their decay to$$ {\Xi}^{-}{\overline{\Xi}}^{+} $$ Ξ − Ξ ¯ + is found. For these states, upper limits of the products of the branching fraction and the electronic partial width at the 90% confidence level are provided.

Physics↗
NASA NTRS1994

Temperature dependence of the ozone obsorption spectrum over the wavelength range 410 to 760 nm

The ozone, O3, absorption cross sections between 410 and 760 nm, the Chappuis band, were measured at 220, 240, 260, and 280 K relative to that at room temperature using a diode array spectrometer. The measured cross sections varied very slightly, less than 1%, with decreasing temperature between 550 and 660 nm, near the peak of the Chappuis band. At wavelengths away from the peak, the absorption cross sections decreased with decreasing temperature; e.g., about 40% at 420 nm between 298 and 220 K. These results are compared with previous measurements and the impact on atmospheric measurements are discussed.

Burkholder, James B.↗
DOE OSTI2025

Measurement of the inclusive WZ production cross section in pp collisions at $\sqrt{\textrm{s}}$ = 13.6 TeV

The inclusive WZ production cross section is measured in proton-proton collisions at a centre-of-mass energy of 13.6 TeV, using data collected during 2022 with the CMS detector, corresponding to an integrated luminosity of 34.7 fb −1 . The measurement uses multileptonic final states and a simultaneous likelihood fit to the number of events in four different lepton flavour categories: eee, ee μ , μμ e, and μμμ . The selection is optimized to minimize the number of background events, and relies on an efficient prompt lepton discrimination strategy. The WZ production cross section is measured in a phase space defined within a 30 GeV window around the Z boson mass, as σ total (pp → WZ) = 55.2 ± 1.2 (stat) ± 1.2 (syst) ± 0.8 (lumi) ± 0.3 (theo) pb. In addition, the cross section is measured in a fiducial phase space closer to the detector-level requirements. All the measurements presented in this paper are in agreement with standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of exclusive pion pair production in proton–proton collisions at $\sqrt{s}={7}\,\text {TeV}$ with the ATLAS detector

The exclusive production of pion pairs in the process $pp$ → $pp π$ + $π$ - has been measured at $\sqrt{s}={7}\,\text {TeV}$ with the ATLAS detector at the LHC, using $80 µb$ -1 of low-luminosity data. The pion pairs were detected in the ATLAS central detector while outgoing protons were measured in the forward ATLAS ALFA detector system. This rep resents the first use of proton tagging to measure an exclusive hadronic final state at the LHC. A cross-section measurement is performed in two kinematic regions defined by the pro ton momenta, the pion rapidities and transverse momenta, and the pion–pion invariant mass. Cross-section values of $4.8 ± 1.0$ ${(stat)}^{+0.3}_{-0.2}$ $(syst) µ b$ and $9 ± 6$ ${(stat)}^{+2}_{-2}$ $(syst) µ b$ are obtained in the two regions; they are compared with theoretical models and provide a demonstration of the feasibility of measurements of this type.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Threshold charmonium photoproduction with GlueX

Exclusive charmonium photoproduction near threshold opens the door for studying the gluonic properties of the proton: gluonic GPDs, anomalous contribution to the mass of the proton, gravitational form factors, the mass radius of the proton. However, such an ambitious program requires precise measurements to validate the theoretical assumptions that relate the experimental results to the above quantities. The first total cross-section measurements of near-threshold exclusive J/? photoproduction (?p?J/?p) by the GlueX collaboration sparked remarkable theoretical interest, however had limited statistics. We will report new total cross-section results based on more than a four-fold increase in statistics. Even more, due to the full acceptance of the GlueX experiment for this reaction, we will present first measurements of the differential cross-sections over the whole near-threshold kinematic region. Such measurements enable more general conclusions about the reaction mechanism when compared to a wide range of theoretical predictions including GPD calculations and models with open-charm intermediate states.

Pentchev, Lubomir↗
DOE OSTI2026

Inclusive Charged-Current Electron Neutrino Interactions in SBND

The Short-Baseline Near Detector (SBND), a 112 ton liquid argon time projection chamber (LArTPC), is the near detector of the Short- Baseline Neutrino Program at Fermilab. Due to its proximity to the Booster Neutrino Beam target, SBND has already seen a record-breaking number of electron neutrino interactions on argon. We present preliminary results from SBND’s differential inclusive electron neutrino charged-current analysis from our first year of beam data, selecting over 2,000 interactions. This analysis will present the largest sample of electron neutrinos on argon to date, as well as the first differential cross section measurement of electron neutrinos. This poster will give an overview of the selection, cross-section extraction, and demonstrate SBND’s detector and electromagnetic shower reconstruction performance through data/MC comparisons.

Tung, Lynn [Chicago U.]↗
NASA NTRS1996

Depolarization Measurements with the High Spectral Resolution Lidar

This paper describes modifications to the University of Wisconsin High Spectral Resolution Lidar (HSRL) which permit very precise depolarization measurements in addition to optical depth, backscatter cross section, and extinction cross section measurements. Because HSRL separates the lidar return into aerosol and molecular contributions, they can be measured separately.

Eloranta, E. W.↗
DOE OSTI2025

$\nu$-Ar Interaction Measurements in the NuMI Beam at ICARUS

This work presents progress toward neutrino-Ar cross-section measurements at ICARUS using the NuMI beam. ICARUS observes muon and electron neutrino interactions in the GeV energy range. Measurements of these interactions offer unique opportunities to infer neutrino interaction cross sections on an argon nuclear target within an energy range that overlaps both the SBN oscillation search and a significant portion of the DUNE spectrum.

Salmoria, Gabrieli [Parana Tech. Fed. U., Toledo] ↗
DOE OSTI2024

Recognizing Unrecognized Sources of Uncertainty (USU) in Nuclear Data

Historically, time-of-flight (TOF) nuclear cross section measurements on different nuclides are assumed to be uncorrelated if they were recorded in different facilities with identical methods, identical facilities with different methods, and even identical facilities with identical methods. Ideally, measurements of different nuclides would truly be uncorrelated thus providing independent assessments of some cross section. In reality, correlations exist between measurements but are simply assumed to be unimportant. To eliminate these qualitative assumptions, in this paper we make a counter-intuitive suggestion to perform an intentionally correlated measurement of energy-differential fission and capture reactions for nuclides in a single criticality safety benchmark during a single experimental campaign. While this would introduce undesirable correlations, it would fully quantify correlations between datasets, rather than assume that the correlations do not exist.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

VAIM-CFF: a variational autoencoder inverse mapper solution to Compton form factor extraction from deeply virtual exclusive reactions

We develop a new methodology for extracting Compton form factors (CFFs) from deeply virtual exclusive reactions such as the unpolarized DVCS cross section using a specialized inverse problem solver, a variational autoencoder inverse mapper (VAIM). The VAIM-CFF framework not only allows us access to a fitted solution set possibly containing multiple solutions in the extraction of all 8 CFFs from a single cross section measurement, but also accesses the lost information contained in the forward mapping from CFFs to cross section. We investigate various assumptions and their effects on the predicted CFFs such as cross section organization, number of extracted CFFs, use of uncertainty quantification technique, and inclusion of prior physics information. We then use dimensionality reduction techniques such as principal component analysis to visualize the missing physics information tracked in the latent space of the VAIM framework. Through re-framing the extraction of CFFs as an inverse problem, we gain access to fundamental properties of the problem not comprehensible in standard fitting methodologies: exploring the limits of the information encoded in deeply virtual exclusive experiments.

Accelerator Physics↗