Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cross section evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The effect of ion-plated silver and sliding friction on tensile stress-induced cracking in aluminum oxide

A Hertzian analysis of the effect of sliding friction on contact stresses in alumina is used to predict the critical load for crack generation. The results for uncoated alumina and alumina coated with ion plated silver are compared. Friction coefficient inputs to the analysis are determined experimentally with a scratch test instrument employing an 0.2 mm radius diamond stylus. A series of scratches were made at constant load increments on coated and uncoated flat alumina surfaces. Critical loads for cracking are detected by microscopic examination of cross sections of scratches made at various loads and friction coefficients. Acoustic emission (AE) and friction trends were also evaluated as experimental techniques for determining critical loads for cracking. Analytical predictions correlate well with micrographic evidence and with the lowest load at which AE is detected in multiple scratch tests. Friction/load trends are not good indicators of early crack formation. Lubrication with silver films reduced friction and thereby increased the critical load for crack initiation in agreement with analytical predictions.

Sliney, Harold E.↗
NASA NTRS1993

The impact of LDEF results on the space application of metal matrix composites

Over 200 graphite/aluminum and graphite/magnesium composites were flown on the leading and trailing edges of LDEF on the Advanced Composites Experiment. The performance of these composites was evaluated by performing scanning electron microscopy and x-ray photoelectron spectroscopy of exposed surfaces, optical microscopy of cross sections, and on-orbit and postflight thermal expansion measurements. Graphite/aluminum and graphite/magnesium were found to be superior to graphite/polymer matrix composites in that they are inherently resistant to atomic oxygen and are less susceptible to thermal cycling induced microcracking. The surface foils on graphite/aluminum and graphite/magnesium protect the graphite fibers from atomic oxygen and from impact damage from small micrometeoroid or space debris particles. However, the surface foils were found to be susceptible to thermal fatigue cracking arising from contamination embrittlement, surface oxidation, or stress risers. Thus, the experiment reinforced requirements for carefully protecting these composites from prelaunch oxidation or corrosion, avoiding spacecraft contamination, and designing composite structures to minimize stress concentrations. On-orbit strain measurements demonstrated the importance of through-thickness thermal conductivity in composites to minimize thermal distortions arising from thermal gradients. Because of the high thermal conductivity of aluminum, thermal distortions were greatly reduced in the LDEF thermal environment for graphite/aluminum as compared to graphite/magnesium and graphite/polymer composites. The thermal expansion behavior of graphite/aluminum and graphite/magnesium was stabilized by on-orbit thermal cycling in the same manner as observed in laboratory tests.

Steckel, Gary L.↗
NASA NTRS2012

Preliminary Design and Evaluation of an Airfoil with Continuous Trailing-Edge Flap

This paper presents the preliminary design and evaluation of an airfoil with active continuous trailing-edge flap (CTEF) as a potential rotorcraft active control device. The development of structural cross-section models of a continuous trailing-edge flap airfoil is described. The CTEF deformations with MFC actuation are predicted by NASTRAN and UM/VABS analyses. Good agreement is shown between the predictions from the two analyses. Approximately two degrees of CTEF deflection, defined as the rotation angle of the trailing edge, is achieved with the baseline MFC-PZT bender. The 2D aerodynamic characteristics of the continuous trailing-edge flap are evaluated using a CFD analysis. The aerodynamic efficiency of a continuous trailing-edge flap is compared to that of a conventional discrete trailing-edge flap (DTEF). It is found that the aerodynamic characteristics of a CTEF are equivalent to those of a conventional DTEF with the same deflection angle but with a smaller flap chord. A fluid structure interaction procedure is implemented to predict the deflection of the continuous trailingedge flap under aerodynamic pressure. The reductions in CTEF deflection are overall small when aerodynamic pressure is applied: 2.7% reduction is shown with a CTEF deflection angle of two degrees and at angle of attack of six degrees. In addition, newly developed MFC-PMN actuator is found to be a good supplement to MFC-PZT when applied as the bender outside layers. A mixed MFC-PZT and MFC-PMN bender generates 3% more CTEF deformation than an MFC-PZT only bender and 5% more than an MFC-PMN only bender under aerodynamic loads.

Shen, Jinwei↗
NASA NTRS2017

Fabrication of the HIAD Large-Scale Demonstration Assembly and Upcoming Mission Applications

Over a decade of work has been conducted in the development of NASAs Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This effort has included multiple ground test campaigns and flight tests culminating in the HIAD projects second generation (Gen-2) deployable aeroshell system and associated analytical tools. NASAs HIAD project team has developed, fabricated, and tested inflatable structures (IS) integrated with flexible thermal protection system (F-TPS), ranging in diameters from 3-6m, with cone angles of 60 and 70 deg.In 2015, United Launch Alliance (ULA) announced that they will use a HIAD (10-12m) as part of their Sensible, Modular, Autonomous Return Technology (SMART) for their upcoming Vulcan rocket. ULA expects SMART reusability, coupled with other advancements for Vulcan, will substantially reduce the cost of access to space. The first booster engine recovery via HIAD is scheduled for 2024. To meet this near-term need, as well as future NASA applications, the HIAD team is investigating taking the technology to the 10-15m diameter scale.In the last year, many significant development and fabrication efforts have been accomplished, culminating in the construction of a large-scale inflatable structure demonstration assembly. This assembly incorporated the first three tori for a 12m Mars Human-Scale Pathfinder HIAD conceptual design that was constructed with the current state of the art material set. Numerous design trades and torus fabrication demonstrations preceded this effort. In 2016, three large-scale tori (0.61m cross-section) and six subscale tori (0.25m cross-section) were manufactured to demonstrate fabrication techniques using the newest candidate material sets. These tori were tested to evaluate durability and load capacity. This work led to the selection of the inflatable structures third generation (Gen-3) structural liner. In late 2016, the three tori required for the large-scale demonstration assembly were fabricated, and then integrated in early 2017. The design includes provisions to add the remaining four tori necessary to complete the assembly of the 12m Human-Scale Pathfinder HIAD in the event future project funding becomes available.This presentation will discuss the HIAD large-scale demonstration assembly design and fabrication per-formed in the last year including the precursor tori development and the partial-stack fabrication. Potential near-term and future 10-15m HIAD applications will also be discussed.

Swanson, G. T.↗
NASA NTRS2017

Fabrication of the HIAD Large-Scale Demonstration Assembly

Over a decade of work has been conducted in the development of NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This effort has included multiple ground test campaigns and flight tests culminating in the HIAD projects second generation (Gen-2) deployable aeroshell system and associated analytical tools. NASAs HIAD project team has developed, fabricated, and tested inflatable structures (IS) integrated with flexible thermal protection system (F-TPS), ranging in diameters from 3-6m, with cone angles of 60 and 70 deg.In 2015, United Launch Alliance (ULA) announced that they will use a HIAD (10-12m) as part of their Sensible, Modular, Autonomous Return Technology (SMART) for their upcoming Vulcan rocket. ULA expects SMART reusability, coupled with other advancements for Vulcan, will substantially reduce the cost of access to space. The first booster engine recovery via HIAD is scheduled for 2024. To meet this near-term need, as well as future NASA applications, the HIAD team is investigating taking the technology to the 10-15m diameter scale. In the last year, many significant development and fabrication efforts have been accomplished, culminating in the construction of a large-scale inflatable structure demonstration assembly. This assembly incorporated the first three tori for a 12m Mars Human-Scale Pathfinder HIAD conceptual design that was constructed with the current state of the art material set. Numerous design trades and torus fabrication demonstrations preceded this effort. In 2016, three large-scale tori (0.61m cross-section) and six subscale tori (0.25m cross-section) were manufactured to demonstrate fabrication techniques using the newest candidate material sets. These tori were tested to evaluate durability and load capacity. This work led to the selection of the inflatable structures third generation (Gen-3) structural liner. In late 2016, the three tori required for the large-scale demonstration assembly were fabricated, and then integrated in early 2017. The design includes provisions to add the remaining four tori necessary to complete the assembly of the 12m Human-Scale Pathfinder HIAD in the event future project funding becomes available.This presentation will discuss the HIAD large-scale demonstration assembly design and fabrication per-formed in the last year including the precursor tori development and the partial-stack fabrication. Potential near-term and future 10-15m HIAD applications will also be discussed.

Swanson, G. T.↗
DOE OSTI2025

Reviewing Incident Neutron Energy assignments in 238 U(n,f) Fission Yield Data

Fission yield evaluations rely not only on precise measurements, but also on clear documentation of experimental conditions especially the energy of incident neutrons inducing fission. In the EXFOR database, following the convention adopted in past evaluations, the incident neutron energy has traditionally been divided in only three energy groups: thermal, fast and 14 MeV. The information is stored in the EN-DUMMY field, which often serves as a placeholder in the presence of broad-spectrum or reactor-based sources. This work reviews 238 U(n,f) entries in EXFOR that use EN-DUMMY, identifying cases where better energy estimates can be made based on the original publications, facility characteristics, or reconstructed neutron spectra. We assign new cross-section-weighted average energies where possible. The revised independent and cumulative fission yield data are compiled for future use in model development and evaluation efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1992

Gigaflop (billion floating point operations per second) performance for computational electromagnetics

Accurate and rapid evaluation of radar signature for alternative aircraft/store configurations would be of substantial benefit in the evolution of integrated designs that meet radar cross-section (RCS) requirements across the threat spectrum. Finite-volume time domain methods offer the possibility of modeling the whole aircraft, including penetrable regions and stores, at longer wavelengths on today's gigaflop supercomputers and at typical airborne radar wavelengths on the teraflop computers of tomorrow. A structured-grid finite-volume time domain computational fluid dynamics (CFD)-based RCS code has been developed at the Rockwell Science Center, and this code incorporates modeling techniques for general radar absorbing materials and structures. Using this work as a base, the goal of the CFD-based CEM effort is to define, implement and evaluate various code development issues suitable for rapid prototype signature prediction.

Shankar, V.↗
DOE OSTI2024

ENDF/B-VIII.1: Electron Reaction Sublibrary

The electrons sublibrary aims to describe electron-atomic cross section data, corresponding to the interaction between electrons and the different atoms. For ENDF/B-VIII.1 we adopted the EPICS2023 EEDL evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

ENDF/B-VIII.1: Photoatomic Reaction Sublibrary

The photo-atomic sublibrary aims to describe atomic photon cross section data, corresponding to the interaction between photons and the different atoms. For ENDF/B-VIII.1 we adopted the EPICS2023 EPDL evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1971

Design and preliminary testing of a Brayton space radiator concept

A low-temperature radiator has been designed to reject 17.62 kW of thermal power from an isotope Brayton power system. This power system has an electrical output of 7.1 kW. The total radiator consists of two radiators connected in series. Both radiators have a redundant coolant loop, shared fins, and are close to flight configuration. A silicone oil is used as the working fluid. Low flow rates and moderate pressure drop in the radiator required a small hydraulic diameter with large heat transfer area and large flow area. To obtain these characteristics and meet schedule limitations, an expanded tube configuration (with an approximately trapezoidal cross section) was selected. Because of the low flow rates and unconventional tube shape, small scale tests were performed to evaluate the validity of existing heat transfer and pressure drop correlations to this case. The results of these tests were in good agreement with predictions.

Miller, T. J.↗
NASA NTRS1976

Clearance of short circuited ion optics electrodes by capacitive discharge

The ion optics electrodes of low specific impulse (3000 sec) mercury electron bombardment ion thrusters are vulnerable to short circuits by virtue of their relatively small interelectrode spacing (0.5 mm). Metallic flakes from backsputtered deposits are the most probable cause of such 'shorts' and 'typical' flakes have been simulated here using refractory wire that has a representative, but controllable, cross section. Shorting wires can be removed by capacitive discharge without significant damage to the electrodes. This paper describes an evaluation of 'short' removal versus electrode damage for several combinations of capacitor voltage, stored energy, and short circuit conditions.

Poeschel, R. L.↗
NASA NTRS1980

Transport functions of nitrogen up to 26,000 K

The current field strength characteristic, E(1), and a large number of radial temperature distributions, T(r,I), measured in a 5 mm N2 cascade arc at normal pressure are used to evaluate the transport properties of nitrogen up to 26,000 K. The electrical conductivity sigma (T) and the Coulomb cross section are determined directly from the E(I) and several T(r,I) curves. Between 10,000 and 15,000 K the radiative energy flux for different arc current, the thermal conductivity, and from this the charge exchange cross section are determined in a good approximation utilizing the large number of measured temperature distributions. It turns out, that at the highest measured arc current, i.e., 570 A, in the axial region of the arc about 95% of the supplied energy is carried off by radiation.

Hermann, W.↗
NASA NTRS1982

Space station preliminary design report

The results of a 3 month preliminary design and analysis effort is presented. The configuration that emerged consists of a very stiff deployable truss structure with an overall triangular cross section having universal modules attached at the apexes. Sufficient analysis was performed to show feasibility of the configuration. An evaluation of the structure shows that desirable attributes of the configuration are: (1) the solar cells, radiators, and antennas will be mounted to stiff structure to minimize control problems during orbit maintenance and correction, docking, and attitude control; (2) large flat areas are available for mounting and servicing of equipment; (3) Large mass items can be mounted near the center of gravity of the system to minimize gravity gradient torques; (4) the trusses are lightweight structures and can be transported into orbit in one Shuttle flight; (5) the trusses are expandable and will require a minimum of EVA; and (6) the modules are anticipated to be structurally identical except for internal equipment to minimize cost.

Source record↗
NASA NTRS1986

Major flattening of the distant geomagnetic tail

The development of a magnetotail cross section model is examined. The characteristics of the model are described. The flux content and magnetic field component are evaluated. The model predictions for the magnetotail are compared with observations. The model predicts insignificant flattening in the near-earth magnetotail, and sizable flattening in the deep and the distant magnetotail caused by the anisotropic magnetic pressure of magnetosheath field lines. Correlation between the model and observations for the distant magnetotail, magnetopause occurrence, and the magnetopause attitude is observed.

Sibeck, D. G.↗
NASA NTRS2016

Development and Implementation of a Design Metric for Systems Containing Long-Term Fluid Loops

John Steele, a chemist and technical fellow from United Technologies Corporation, provided a water quality module to assist engineers and scientists with a metric tool to evaluate risks associated with the design of space systems with fluid loops. This design metric is a methodical, quantitative, lessons-learned based means to evaluate the robustness of a long-term fluid loop system design. The tool was developed by a cross-section of engineering disciplines who had decades of experience and problem resolution.

Steele, John W.↗
NASA NTRS2019

Inducing Bistability in Collapsible Tubular Masts Booms with Thin-Ply Composite Shells

Bistable rollable booms are favorable when a low strain energy requirement for the coiled state is imposed and have more controllable deployment when compared to monostable booms. An inextensional analytical model describing the bending deformation mechanics of Collapsible Tubular Mast (CTM) booms was used to determine how design variables induce bistability, or the existence of two strain energy wells in the rolled-up and unrolled states. The effects of varying lamina material, laminate layup, and shell arc geometries between different inner and outer shell segments on the second strain energy well and stiffness properties were determined for boom cross-sections formed by circular segments. The full design space for two-walled composite CTM booms was explored to evaluate the validity of the developed analytical model. Optimized CTM boom designs were experimentally characterized for comparisons against model results. The model under-predicted the stable coiled diameter of the co-cured two-walled booms by up to 8.9% and 23.4% for the individual thin shells wrapped alone.

Andrew J Lee↗
NASA NTRS2018

Bistable Collapsible Tubular Mast Booms

A promising candidate for deployable composite structures is the two-shelled Collapsible Tubular Mast (CTM) boom, which is to be employed on future solar sail and interplanetary small satellite platforms by the National Aeronautics and Space Administration (NASA). This is due to its two omega-shaped shells forming a closed-section which yields large stiffnesses that allowed for high dimensional stability. An inextensional analytical model describing the bending deformation mechanics of CTM booms was used to determine how design variables induce bistability, or the existence of two strain energy wells. Bistable booms were favorable due to low strain energy requirements for the coiled state and had more controllable deployment when compared to monostable booms. The effects of varying lamina material, laminate layup, and shell arc geometries between different inner and outer shell segments on the second strain energy well and stiffness properties were determined for cross-sections formed by circular segments. The full design space for two-shelled composite CTM booms was explored to evaluate the validity of the simple analytical model developed. Optimal CTM boom designs were manufactured and experimentally characterized for comparisons against model results. The model under-predicted the second stable coiled diameter of the complete two-shelled booms by 27-33% and as low as 3-8% for the individual shells wrapped alone.

Fernandez, Juan M.↗
DOE OSTI2026

Benchmarking state-of-the-art theory and empirical models of pionless neutrino-argon scattering in GENIE

Upcoming experiments need improved simulations of neutrino scattering. This work uses the popular GENIE event generator to test a variety of neutrino interaction models against recent MicroBooNE measurements of pionless charged-current interactions. The GENIE code can easily interchange model components, including nucleon form factor parameterizations, quasielastic cross-section calculations, treatments of the nuclear ground state and hadronic final-state interactions. Leveraging this software capability in comparisons with MicroBooNE data, the performance of some of GENIE’s most theoretically sophisticated model components is evaluated and contrasted with more empirically-driven alternatives.

Neutrino cross section↗