Search NASA⌕ Search

SEARCH · Search NASA

Results for “Density functional theory simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Phonons in Copper Diphosphide (CuP 2 ): Raman Spectroscopy and Lattice Dynamics Calculations

Copper diphosphide (CuP 2 ) is an emerging binary semiconductor with promising properties for energy conversion and storage applications. While functionality and possible applications of CuP 2 have been studied, there is a curious gap in the investigation of its vibrational properties. In this work, we provide a reference Raman spectrum of CuP 2 , with a complete analysis of all Raman active modes from both experimental and theoretical perspectives. Raman measurements have been performed on polycrystalline CuP 2 thin films with close to stoichiometric composition. Detailed deconvolution of the Raman spectrum with Lorentzian curves has allowed identification of all theoretically predicted Raman active modes (9A g and 9B g ), including their positions and symmetry assignment. Furthermore, calculations of the phonon density of states (PDOS), as well as the phonon dispersions, provide a microscopic understanding of the experimentally observed phonon lines, in addition to the assignment to the specific lattice eigenmodes. We further provide the theoretically predicted positions of the infrared (IR) active modes, along with the simulated IR spectrum from density functional theory (DFT). Overall good agreement is found between the experimental and DFT-calculated Raman spectra of CuP 2 , providing a reference platform for future investigations on this material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe–N–C Materials

The systematic improvement of Fe–N–C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe–N–C materials is the formation of the Fe III –OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of Fe III –OH to Fe II and desorbed H 2 O requires an axial H 2 O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. Importantly, these findings highlight the importance of solvent–substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Identification of a quasi-liquid phase at solid–liquid interface

Abstract An understanding of solid–liquid interfaces is of great importance for fundamental research as well as industrial applications. However, it has been very challenging to directly image solid–liquid interfaces with high resolution, thus their structure and properties are often unknown. Here, we report a quasi-liquid phase between metal (In, Sn) nanoparticle surfaces and an aqueous solution observed using liquid cell transmission electron microscopy. Our real-time high-resolution imaging reveals a thin layer of liquid-like materials at the interfaces with the frequent appearance of small In nanoclusters. Such a quasi-liquid phase serves as an intermediate for the mass transport from the metal nanoparticle to the liquid. Density functional theory-molecular dynamics simulations demonstrate that the positive charges of In ions greatly contribute to the stabilization of the quasi-liquid phase on the metal surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic structure prediction of multi-million atom systems through uncertainty quantification enabled transfer learning

The ground state electron density — obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations — contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accurate ML models that are applicable across many scales and system configurations. Here, we address this fundamental challenge by employing transfer learning to leverage the multi-scale nature of the training data, while comprehensively sampling system configurations using thermalization. Our ML models are less reliant on heuristics, and being based on Bayesian neural networks, enable uncertainty quantification. We show that our models incur significantly lower data generation costs while allowing confident — and when verifiable, accurate — predictions for a wide variety of bulk systems well beyond training, including systems with defects, different alloy compositions, and at multi-million-atom scales. Moreover, such predictions can be carried out using only modest computational resources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unconventional nonlinear Hall effects in twisted multilayer 2D materials

We present the first investigation of unusual nonlinear Hall effects in twisted multilayer 2D materials. Contrary to expectations, our study shows that these nonlinear effects are not merely extensions of their monolayer counterparts. Instead, we find that stacking order and pairwise interactions between neighboring layers, mediated by Berry curvatures, play a pivotal role in shaping their collective nonlinear optical response. By combining large-scale Real-Time Time-Dependent Density Functional Theory (RT-TDDFT) simulations with model Hamiltonian analyses, we demonstrate a remarkable second-harmonic transverse response in hexagonal boron nitride four-layers, even in cases where the total Berry curvature cancels out. Furthermore, our symmetry analysis of the layered structures provides a simplified framework for predicting nonlinear responses in multilayer materials in general. Our investigation challenges the prevailing understanding of nonlinear optical responses in layered materials and opens new avenues for the design and development of advanced materials with tailored optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Water-enhanced bifunctional metal-acid catalyst for C=C bond hydrogenation

Water-assisted proton shuttling can promote hydrogenation of polar functional groups, and it is generally believed that such an effect can be hardly applied to hydrogenation of C═C bonds due to the latter's weak interaction with water. Here, we report density functional theory calculations and metadynamics simulations, through which we show a dynamic bifunctional metal–acid site that can be transformed, when interacting with water, into an active configuration for unexpected water-enhanced proton shuttling to C═C bonds. In particular, we investigated B(OH)3 anchored to a Ni catalyst for hydrogenation of cyclohexene in an organic solvent, which showed in experiments an increased rate by 100 times when adding a small amount of water. Metadynamics simulations suggest that a B(OH)3–H2O cluster can form on Ni(111), which promotes the proton transfer in the first hydrogenation step, while the second hydrogenation is still driven by metal-mediated direct H-transfer. The recovery process of B(OH)3–H2O also involves a proton shuttling step. We find that the boric species on the surface serves as an electron reservoir and carries the negative charge to balance the positive charge in the proton transfer steps. This work thus provides fundamental insights into this dynamic transformation process of the metal–acid interface, which can in principle be applied to many other bifunctional systems for hydrogenating non-polar unsaturated groups by engineering the interfacial charge separation.

Sun, Shoutian↗
DOE OSTI2023

Mechanistic origins of methyl-driven Overhauser DNP

The Overhauser effect in the dynamic nuclear polarization (DNP) of non-conducting solids has drawn much attention due to the potential for efficient high-field DNP as well as a general interest in the underlying principles that enable the Overhauser effect in small molecules. We recently reported the observation of 1 H and 2 H Overhauser effects in H 3 C- or D 3 C-functionalized Blatter radical analogs, which we presumed to be caused by methyl rotation. In this work, we look at the mechanism for methyl-driven Overhauser DNP in greater detail, considering methyl librations and tunneling in addition to classical rotation. Here, we predict the temperature dependence of these mechanisms using density functional theory and spin dynamics simulations. Comparisons with results from ultralow-temperature magic angle spinning-DNP experiments revealed that cross-relaxation at temperatures above 60 K originates from both libration and rotation, while librations dominate at lower temperatures. Due to the zero-point vibrational nature of these motions, they are not quenched by very low temperatures, and methyl-driven Overhauser DNP is expected to increase in efficiency down to 0 K, predominantly due to increases in nuclear relaxation times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase stability and coercivity in La 2 Fe 14 B magnet

Critical rare-earth free La 2 Fe 14 B (2:14:1) has the potential to be a gap permanent magnet. However, La 2 Fe 14 B decomposes into La, α-Fe, and La 4 Fe 4 phases below 1067 K. The phase stability and coercivity have been studied in La 2 Fe 14 B magnet using first principles DFT (density functional theory) calculation and micromagnetic simulation. For a perfect La 2 Fe 14 B cube (edge length of 256 nm) without any structural defects and soft magnetic secondary phases, the coercivity (8.5 kOe) is reduced to ~40% of its magnetocrystalline anisotropy field ( H A = 20 kOe). Further, the coercivity sharply reduces to 3.2 kOe upon forming a thin layer (2 nm) of α-Fe on the surface of the La 2 Fe 14 B cube particle. The DFT calculations indicate that a partial replacement of La by other rare-earth (RE) elements can enhance the structural stability of 2:14:1. The gains in cohesive energy are 0.75, 0.10, and 0.33 eV per formula unit in (La 0.5 RE 0.5 ) 2 Fe 14 B with RE = Ce, Pr, and Nd, respectively. Stabilizing the 2:14:1 structure and mitigating the formation of soft magnetic structural defects or impurity phases such as α-Fe is necessary to develop La 2 Fe 14 B based magnet, which can be moderately achieved via partial substitution of La by other rare earth elements such as Ce, Pr, and Nd.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Segregation of Al and its effect on coercivity in Nd-Fe-B

Doping a small amount of Al can effectively enhance coercivity in Nd-Fe-B magnets. Here we investigated the partitioning behavior of Al and its effect on coercivity in Nd-Fe-B using first principles DFT (density functional theory) calculation and micromagnetic simulation. The calculated substitution energies of Fe by Al are negative at the crystallographic sites of 4c and 8j 2 while they are positive values at the other sites in Nd 2 Fe 14 B (2:14:1), implying a small solubility of Al in 2:14:1. Further, Al prefers to segregate at grain boundary (GB) and stabilize the Nd-Fe-Al phase with a Nd 6 Fe 13 Si-type tetragonal structure (6:13:1). The formation of the antiferromagnetic or weak ferrimagnetic 6:13:1-like phase depletes Fe and reduces the amount of ferromagnetic Nd–Fe type grain boundary phase (GBP), which weakens the inter-grain magnetic interaction. Micromagnetic simulations indicate that the 6:13:1-like GBP increases the pinning field of magnetic domain wall at GB and suppresses the nucleation of reversal magnetic domain on the grain surface of 2:14:1 during demagnetization process. The formation of Al-rich shell on 2:14:1 grain surface can further moderately increase the domain pinning field at GB and the nucleation field of 2:14:1 grain. Developing novel processing method to tailor Al segregation and promote formation of 6:13:1-like phase at GB can be a promising approach to improve coercivity in Nd-Fe-B magnet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Machine learning-based interatomic potential development and phase transition analysis of ferroelectric hafnium dioxide

The ferroelectric phase (𝑃⁢𝑐⁢𝑎⁢2 1 , which is in orthorhombic symmetry) of hafnium dioxide (HfO 2 ) has gained much attention due to its potential applications in nanoelectronics and advanced memory devices. However, its complex phase behavior under external stimuli, such as pressure and temperature, remains a subject of intense investigation. This study focuses on developing a machine learning-based interatomic potential (MLIP) that is trained with data from density-functional theory (DFT) calculations to simulate phase transitions and mechanical properties of HfO 2 . The developed MLIP predicts lattice parameters, equations of state, bulk and shear moduli, and elastic constants that closely align with DFT predictions for several phases and at various pressures. Once validated, the MLIP is used to investigate the phase transitions of ferroelectric HfO 2 (𝑃⁢𝑐⁢𝑎⁢2 1 ) under both isobaric and constant stress conditions at elevated temperatures ranging from 200 to 2500 K. We used several complementary methods, including local symmetry identification, radial distribution function, and x-ray diffraction characterization, to identify interesting phase transitions among several competitive hafnia phases predicted from our simulations. The suggested methods uniformly reveal that under pure deviatoric condition, the system favors a transition from the orthorhombic 𝑃⁢𝑐⁢𝑎⁢2 1 phase to a tetragonal (𝑃⁢4 2 /𝑛⁢𝑚⁢𝑐) phase, whereas a zero stress condition drives the system from the 𝑃⁢𝑐⁢𝑎⁢2 1 phase to another orthorhombic (𝑃⁢𝑏⁢𝑐⁢𝑛) phase. These findings provide crucial insights into stress and temperature-induced phase behavior of hafnia, guiding future experimental and theoretical studies for optimizing hafnia-based ferroelectric devices.

Ferroelectric HfO2↗
DOE OSTI2025

Carbon-carbon interactions in warm dense titanium carbide

Encouraged by experimental reports of diamond precipitation in carbon-containing materials under warm dense matter conditions and in shock compression experiments, we examine the behavior of carbon in TiC using density functional theory-molecular dynamics simulations. Two polymorphs of TiC are considered, the ambient-pressure B1 ($Fm$$\overline{3}$$m$) structure in which C-C interactions are prevented by geometric constraints, and a high-pressure Cmcm structure in which C atoms condense into zigzag chains. Chemistry-inspired bonding analyses confirm the covalently bound nature of these chains and further illuminate important interatomic interactions in both structures. Upon melting of B1 TiC, new short-range C-C interactions develop in the liquid, while the pre-existing C-C interactions in Cmcm TiC persist in the liquid. Here, the resulting carbon networks in the melt provide a promising environment for eventual diamond nucleation.

Ab initio molecular dynamics↗
DOE OSTI2020

Electronic band gaps from quantum Monte Carlo methods

We develop a method for calculating the fundamental electronic gap of semiconductors and insulators using grand canonical quantum Monte Carlo simulations. Further, we discuss the origin of the bias introduced by supercell calculations of finite size and show how to correct the leading and subleading finite size errors either based on observables accessible in the finite-sized simulations or from density-functional theory calculations. Our procedure is applied to carbon, silicon, and molecular hydrogen crystals, and compared to experiment for carbon and silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

White-line evolution in shocked solid Ta evidenced by synchrotron x-ray absorption spectroscopy

Time-resolved x-ray absorption experiments have been performed on shocked tantalum. Using a single 100 ps synchrotron x-ray pulse, nanosecond-lived equilibrium states of shocked solid Ta have been measured by L 3 -edge absorption spectroscopy. The energy shift and intensity change of the white line were measured up to 130 GPa and 2000 K. The experimental results are discussed in light of density functional theory calculations and FEFF simulations. Lastly, the absence of occurrence of the hcp-ω phase is suggested from the analysis of the shape of the white line.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-pressure behavior of 3.65 Å phase: Insights from Raman spectroscopy

Abstract The 3.65 Å phase [MgSi(OH)6] is a hydrous phase that is predicted to be stable in a simplified MgO-SiO2-H2O (MSH) ternary system at pressures exceeding 9 GPa. Along cold subduction zones, it is likely to transport water, bound in its crystalline lattice, into the Earth’s interior. The 3.65 Å phase consists of Mg and Si octahedral sites attached to the hydroxyl group that forms a hydrogen bond and is predicted to undergo pressure-induced symmetrization of the hydrogen bond. Therefore, in this study, we investigate the high-pressure behavior of the 3.65 Å phase using Raman spectroscopy. We have conducted five distinct compressions up to ~60 GPa using two different pressure-transmitting media—alcohol mixture and neon. At ambient conditions, we identified vibrational modes using complementary first-principles simulations based on density functional perturbation theory. Upon compression, we note that the first derivative of the vibrational modes in the lattice region stiffens, i.e., b1lattice > 0. In contrast, the hydroxyl region softens, i.e., b1OH > 0. This is indicative of the strengthening of hydrogen bonding upon compression. We noticed a significant broadening of vibrational modes related to hydroxyl groups that are indicative of proton disorder. However, within the maximum pressures explored in this study, we did not find evidence for pressure-induced symmetrization of the hydrogen bonds. We used the pressure derivative of the vibrational modes to determine the ratio of the bulk moduli and their pressure derivative. We note that the smaller bulk moduli of hydrous phases compared to the major mantle phases are compensated by significantly larger pressure derivatives of the bulk moduli for the hydrous phases. This leads to a significant reduction in the elasticity contrast between hydrous and major mantle phases. Consequently, the detection of the degree of mantle hydration is likely to be challenging at greater depths.

Geochemistry & Geophysics↗
DOE OSTI2020

Experimental and Theoretical Studies of Ultrafast Vibrational Energy Transfer Dynamics in Energetic Materials

Energy transfer through anharmonically-coupled vibrations influences the earliest chemical steps in shockwave-induced detonation in energetic materials. A mechanistic description of vibrational energy transfer is therefore necessary to develop predictive models of energetic material behavior. We performed transient broadband infrared spectroscopy on hundreds of femtoseconds to hundreds of picosecond timescales as well as density functional theory and molecular dynamics simulations to investigate the evolution of vibrational energy distribution in thin film samples of pentaerythritol tetranitrate (PETN) , 1,3,5 - trinitroperhydro - 1,3,5 - triazine (RDX) , and 2,4,6 - triamino 1,3,5 - trinitrobenzene (TATB). Experimental results show dynamics on multiple timescales, providing strong evidence for coupled vibrations in these systems, as well as material-dependent evolution on tens to hundreds of picosecond timescales. Theoretical results also reveal pathways and distinct timescales for energy transfer through coupled vibrations in the three investigated materials, providing further insight into the mechanistic underpinnings of energy transfer dynamics in energetic material sensitivity.

36 MATERIALS SCIENCE↗