Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dipole approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms

Here, an analytic model of the evolution of dislocation density in fcc polycrystals is described. The evolution equations approximately account for most known dislocation storage, dynamic recovery, and dislocation generation mechanisms in fcc polycrystals. Specifically, the model incorporates network (forest) and grain boundary storage, mobile-network and mobile–mobile annihilation, screw–screw annihilation via athermal and thermal single cross-slip, generation by double cross-slip (Koehler mechanism, including dipole formation), Frank-Read sources, grain boundary nucleation, and mobile–immobile dislocation nucleation due to shock loading. Single cross-slip is assumed to proceed through the Friedel–Escaig (FE) mechanism; the corresponding activation energy is calculated using a modified FE model. The activation energy for double cross-slip is calculated for the first time by extending the FE model. The exact evolution equations are integro-differential equations, and as such are difficult to implement in a code; hence, the evolution equations are simplified by making several approximations. Preliminary results on copper are presented, including comparisons to experimental data.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Lunar scout: A Project Artemis proposal

The results of a student project to design a lunar lander in the context of a specifically defined mission are presented. The Lunar Scout will be launched from Cape Canaveral, Florida onboard a Delta II launch vehicle. The Delta II will carry the lander and its payload to a 1367 km orbit. Once it reaches that altitude, a STAR 48A solid rocket motor will kick the spacecraft into a lunar trajectory. After burnout of the lunar insertion motor, it will be jettisoned from the spacecraft. The flight from the earth to the moon will take approximately 106.4 hours. During this time the battery, which was fully charged prior to launch, will provide all power to the spacecraft. Every hour, the spacecraft will use its sun sensors and star trackers to update its position, maintain some stabilization and relay it back to earth using the dipole antennas. At the start of its lunar trajectory, the spacecraft will fire one of its 1.5 N thrusters to spin in at a very small rate. The main reason for this is to prevent one side of the spacecraft from overheating in the sun. When the spacecraft nears the moon, it will orient itself for the main retro burn. At an altitude of 200 km, a 4400 N bipropellant liquid thruster will ignite to slow the spacecraft. During the burn, the radar altimeter will be turned on to guide the spacecraft. The main retro rocket will slow the lander to 10 m/s at an approximate altitude of 40 km above the moon. From there, the space craft will use four 4.5 N hydrazine vertical thrusters and 1.5 N horizontal thrusters to guide the spacecraft to a soft landing. Once on the ground, the lander will shutoff the radar and attitude control systems. After the debris from the impact has settled, the six solar panels will be deployed to begin recharging the batteries and to power up the payload. The feedhorn antenna will then rotate to fix itself on the earth. Once it moves, it will stay in that position for the spacecraft's lifetime. The payload will then be activated to begin the lunar mission.

Source record↗
DOE OSTI2026

Promise of Graph Sparsification and Decomposition for Noise Reduction in QAOA: Analysis for Trapped-Ion Compilations

We develop new approximate compilation schemes that significantly reduce the expense of compiling the Quantum Approximate Optimization Algorithm (QAOA) for solving the Max-Cut problem. Our main focus is on compilation with trapped-ion simulators using Pauli-X operations and all-to-all Ising Hamiltonian HIsing evolution generated by Molmer-Sorensen or optical dipole force interactions, though some of our results also apply to standard gate-based compilations. Our results are based on principles of graph sparsification and decomposition; the former reduces the number of edges in a graph while maintaining its cut structure, while the latter breaks a weighted graph into a small number of unweighted graphs. Though these techniques have been used as heuristics in various hybrid quantum algorithms, there have been no guarantees on their performance, to the best of our knowledge. This work provides the first provable guarantees using sparsification and decomposition to improve quantum noise resilience and reduce quantum circuit complexity. For quantum hardware that uses edge-by-edge QAOA compilations, sparsification leads to a direct reduction in circuit complexity. For trapped-ion quantum simulators implementing all-to-all HIsing pulses, we show that for a (1−ϵ) factor loss in the Max-Cut approximation (ϵ>0), our compilations improve the (worst-case) number of HIsing pulses from O(n2) to O(nlog(n/ϵ)) and the (worst-case) number of Pauli-X bit flips from O(n2) to O(nlog(n/ϵ)ϵ2) for n-node graphs. This is an asymptotic improvement for any constant ϵ>0. We demonstrate that significant improvements to the approximation ratio are obtained using decomposition in simulated trapped-ion experiments with dephasing noise. We further present a generic argument showing that sparsification results in an exponentially improved circuit fidelity lower bound in digital computing schemes based on one- and two-qubit gates, which are relevant to a wide variety of hardwares such as superconducting qubits and certain neutral atom or trapped ion setups, and more sophisticated noise models. We anticipate these approximate compilation techniques will be useful tools in a variety of future quantum computing experiments.

Moondra, Jai [Georgia Institute of Technology]↗
DOE OSTI2023

Two-level systems in nucleated and non-nucleated epitaxial alpha-tantalum films

Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. However, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, α-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of α-Ta, but here we observe the epitaxial process and present few-photon microwave loss measurements in Nb-nucleated Ta films. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of the crystalline order on quantum coherence. In both cases, films grew with Al 2 O 3 (001) ∥ Ta (110), indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 ± 0.1 × 10 -5 ) than non-nucleated (5 ± 1× 10 -6 ) in approximate proportion to defect densities as characterized by x-ray diffraction (0.27° vs 0.18° [110] reflection width) and electron microscopy (30 vs 70 nm domain size). Furthermore, the dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature α-Ta epitaxy may enable the growth of microstate-free heterostructures, which would not withstand high temperature processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Widespread Negative Longitudinal Piezoelectric Responses in Ferroelectric Crystals with Layered Structures

In this study, we investigate the underlying mechanisms of the universal negative piezoelectricity in low-dimensional layered materials by carrying out first-principles calculations. Two-dimensional layered ferroelectric CuInP 2 S 6 is analyzed in detail as a typical example, but the theory can be applied to any other low-dimensional layered piezoelectrics. Consistent with the theory proposed in [Phys. Rev. Lett. 119, 207601 (2017), the anomalous negative piezoelectricity in CuInP 2 S 6 also results from its negative clamped-ion term, which cannot be compensated by the positive internal-strain part. Here, we focus on a more general rule by proposing that having a negative clamped-ion term should be universal among piezoelectric materials, which is attributed to the “lag of Wannier center” effect. The internal-strain term, which is the change in polarization due to structural relaxation in response to strain, is mostly determined by the spatial structure and chemical bonding of the material. In a low-dimensional layered piezoelectric material such as CuInP 2 S 6 , the internal-strain term is approximately zero. This is because the internal structure of the molecular layers, which are bonded by the weak van der Waals interaction, responds little to the strain. As a result, the magnitude of the dipole, which depends strongly on the dimension and structure of the molecular layer, also has a small response with respect to strain. An equation bridging the internal strain responses in low-dimensional and three-dimensional piezoelectrics is also derived to analytically express this point. This work aims to deepen our understanding about this anomalous piezoelectric effect, especially in low-dimensional layered materials, and provide strategies for discovering materials with novel electromechanical properties.

2-dimensional systems↗
NASA NTRS1980

Some possible effects of Jupiter's rings on the Jovian inner plasmasphere

The ionospheric plasma density on magnetic field lines threading the Jovian rings which are located inside approximately 1.8 Jupiter radii on the jovigraphic equatorial plane is calculated by using a rotating ion exosphere model. It is found that the bulk of the ionospheric particles on these field lines are on ballistic trajectories. On field lines approximately symmetric with respect to the jovigraphic equator, the ring, which to a first approximation would absorb the population of trapped particles, consequently has little effect. On field lines which are made asymmetric by the higher-order multipoles of Jupiter's field and the tilt of the dipole axis, the rings may have a significant effect. It is suggested that better definition of the rings' atmospheric and ionospheric properties is required to model these localized effects. If the rings are found to be an important plasma source for the inner magnetosphere, the present exospheric model will have to be revised.

Luhmann, J. G.↗
NASA NTRS1988

Light scattering by an arbitrary particle - The scattering-order formulation of the coupled-dipole method

The field scattered by an arbitrary particle modeled as an array of coupled dipoles can be expressed as an infinite series in terms of scattering orders. The fields of a given scattering order can be calculated from those of the previous order. When the series converge, the approximate method agrees well with the exact theory for a sphere. The maximum size of the dipolar array that can be used with the method as well as the number of terms required for convergence depends on the relative refractive index and the shape of the particle.

Singham, Shermila Brito↗
NASA NTRS1953

Motion of a cylinder under the surface of a heavy fluid

General equations are derived for the approximate solution of the flow of a heavy infinite depth about a submerged circular cylinder where the center of the cylinder is submerged 1.5 diameter or greater. Then by replacing the cylinder by a dipole of a certain strength an equation is derived for the wave resistance of a circular cylinder moving in a fluid of finite depth.

HYDRODYNAMIC THEORY↗
NASA NTRS1994

The source of Jovian auroral hiss observed by Voyager 1

Observations of auroral hiss obtained from the Voyager 1 encounter with Jupiter have been reanalyzed. The Jovian auroral hiss was observed near the inner boundary of the warm Io torus and has a low-frequency cutoff caused by propagation near the resonance cone. A simple ray tracing procedure using an offset tilted dipole of the Jovian magnetic field is used to determine possible source locations. The results obtained are consistent with two sources located symmetrically with respect to the centrifugal equator along an L shell (L approximately = 5.59) that is coincident with the boundary between the hot and cold regions of the Io torus and is located just inward of the ribbon feature observed from Earth. The distance of the sources from the centrifugal equator is approximately 0.58 +/- 0.01 R(sub J). Based on the similarity to terrestrial auroral hiss, the Jovian is auroral hiss is believed to be generated by beams of low energy (approximately tens to thousands of eV) electrons. The low-frequency cutoff of the auroral hiss suggests that the electrons are accelerated near the inferred source region, possibly by parallel electric fields similar to those existing in the terrestrial auroral regions. A field-aligned current is inferred to exist at L shells just inward of the plasma ribbon. A possible mechanism for driving this current is discussed.

Morgan, D. D.↗
NASA NTRS2003

Martian Crustal Magnetism: What Have We Learned After Approximately 6 Years of MGS Observations?

The MAG/ER investigation aboard the Mars Global Surveyor (MGS) has established conclusively that an internal, dynamo-generated field does not currently exist at Mars and discovered, unexpectedly, strong magnetization in the crust. An estimate of the upper limit of the current Mars dipole moment derived from the MGS data yields M < ~2 x 10(exp 17) A-m2, which corresponds to a surface equatorial field strength of < 0.5 nT. The intense magnetization of the crust is closely associated with the ancient, heavily cratered high terrain, which lies south of Mars dichotomy boundary. The correlation of magnetization with the old terrain and the role of impacts, which have modified the magnetic properties of the crust, constitute a new and powerful diagnostic tool that is providing a unique view into the early thermal history of the planet, which was almost totally unknown prior to the arrival of MGS. Data from the Lunar Prospector mission complement contemporary analyses and interpretation of crustal magnetism in planetary system bodies that do not currently possess core dynamos. The observation of magnetic lineations over Terra Sirenum (Sirenum Fossae) and Terra Cimmeria, are suggestive of tectonic processes observed at Earth in association with sea-floor spreading and geomagnetic field reversals. If this association is correct, it would indicate the possible existence of plate tectonics and magnetic field reversals in Mars' early history. Alternative models involving fault/graben formation associated with the fracturing of a thin, magnetized crustal layer by tectonic or volcanism-induced stresses, yield equally valid interpretations. To date, no reliable correlation between topography, geology and crustal magnetism has been established and the origin of these remarkable Martian magnetic anomalies remains a mystery.

M H Acuna↗
DOE OSTI2025

Higgs Inflation and the Electroweak Gauge Sector

Abstract We introduce a method that allows the Higgs to be the inflaton. The Higgs is considered as a pseudo‐Nambu‐Goldstone (pNG) boson of a global coset symmetry , which is spontaneously breaks at an energy scale . A suitable Chern−Simons (CS) interaction is given to it, with representing the dimensionless CS coupling strength and an decay constant. As a result, slow‐roll inflation occurs via ‐induced friction down a steep sinusoidal potential. To obey electroweak symmetry, the lowest‐order CS interaction is required to be quadratic in the Higgs, with the coupling strength . Higher‐order interaction terms keep the full Lagrangian nearly invariant under the approximate pNG shift symmetry. Employing the simplest symmetry coset , ‐folds of inflation occur when . Successfully explaining inflation necessitates small values of the decay constant, ; this in turn requires large , which is ruled out by electric dipole measurements. Although the electroweak hierarchy problem while achieving successful inflation, the real benefit is found in providing a different path to identifying the Higgs as the inflaton, outside the standard modified‐gravity framework.

Alexander, Stephon [Brown Center for Theoretical P↗
NASA NTRS1990

Satellite sweeping of electrons at Neptune and Uranus

Knowledge of satellite sweeping parameters at Neptune and Uranus, and of their functional dependences on particle energy and pitch angle, can be critical in the proper identification of parent absorbers for observed absorption signatures in regions where OTD (offset, tilted dipole) models are valid representations of the measured magnetic fields. In this paper, critical electron energies are calculated for longitudinal drift resonance, snowplow (i.e., strong) absorption, leapfrog, and corkscrew effects, using a reduced version of OTD that neglects nonaxial dipole offsets. Earlier analytic work on sweeping rates is extended to give the radial dependence of these rates within the minimum-L region and to set limits on diffusion of electrons with the simplifying approximation that leapfrog effects are ignored.

Cooper, John F.↗
NASA NTRS1989

PROMIS series. Volume 7: GOES 5 and GOES 6 geosynchronous magnetic field data for March - June 1986

This is the seventh in a series of volumes pertaining to the Polar Region Outer Magnetosphere International Study (PROMIS). This volume contains 24 hour plots of approximately 1-minute average magnetic fields from the GOES 5 and GOES 6 spacecraft for the period March 10 through June 16, 1986. Data are displayed in a VDH coordinate system based on a centered dipole with northern hemisphere geographic coordinates of the pole at 78.80 deg latitude and 289.24 deg longitude.

Fairfield, D. H.↗
NASA NTRS1992

An intracloud lightning parameterization scheme for a storm electrification model

The parameterization of an intracloud lightning discharge has been implemented in the present storm electrification model. The initiation, propagation direction, and termination of the discharge are computed using the magnitude and direction of the electric field vector as the determining criteria. The charge redistribution due to the lightning is approximated assuming the channel to be an isolated conductor with zero net charge over its entire length. Various simulations involving differing amounts of charge transferred and distribution of charges have been done. Values of charge transfer, dipole moment change, and electrical energy dissipation computed in the model are consistent with observations. The effects of the lightning-produced ions on the hydrometeor charges and electric field components depend strongly on the amount of charge transferred. A comparison between the measured electric field change of an actual intracloud flash and the field change due to the simulated discharge shows favorable agreement. Limitations of the parameterization scheme are discussed.

Helsdon, John H., Jr.↗
NASA NTRS2016

Three-Dimensional Distribution of Ejecta in Supernova 1987A at 10,000 Days

Due to its proximity, SN 1987A offers a unique opportunity to directly observe the geometry of a stellar explosion as it unfolds. Here we present spectral and imaging observations of SN 1987A obtained approximately 10,000 days after the explosion with HST/STIS and VLT/SINFONI at optical and near-infrared wavelengths. These observations allow us to produce the most detailed 3D map of H(alpha) to date, the first 3D maps for [Ca II] lambda lambda 7292, 7324 [O I] lambda lambda 6300, 6364, and Mg II lambda lambda 9218, 9244, as well as new maps for [Si I] + [Fe II] 1.644 micrometers and He I 2.058 micrometers. A comparison with previous observations shows that the [Si I] + [Fe II] flux and morphology have not changed significantly during the past ten years, providing evidence that this line is powered by Ti-44. The time evolution of H(alpha) shows that it is predominantly powered by X-rays from the ring, in agreement with previous findings. All lines that have sufficient signal show a similar large-scale 3D structure, with a north-south asymmetry that resembles a broken dipole. This structure correlates with early observations of asymmetries, showing that there is a global asymmetry that extends from the inner core to the outer envelope. On smaller scales, the two brightest lines, Hα and [Si I]+[Fe II] 1.644 micrometers, show substructures at the level of approximately 200-1000 km s(exp -1) and clear differences in their 3D geometries. We discuss these results in the context of explosion models and the properties of dust in the ejecta.

Larsson, J.↗
DOE OSTI2020

Signatures of enhanced octupole correlations at high spin in 136 Nd

We report experimental signatures of moderately enhanced octupole correlations at high spin in 136 Nd are indicated for the first time. The extracted dipole moments of two negative-parity bands are only two times smaller than those of the lanthanide nuclei with $\textit{N}$ ≈ 90 which present well-established octupole correlations. Calculations using the cranked quasiparticle random phase approximation and a model of quadrupole-octupole rotations with octupole vibrations reveal the structure of the bands and the enhanced octupole correlations at high spin in 136 Nd .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Z1/3/ contribution to the energy loss of heavy charged particles

The Z1(3) contribution of distant collisions to the average energy loss of heavy charged particles is obtained by extending Bethe's quantum-mechanical calculation to the next highest order in Z1. The second-order Born approximation for the inelastic-collision cross section is simplified by using two major approximations. The infinite summation over terms arising from the coupling to intermediate states of the target atom is approximated with the aid of a parameter and the closure relation. This parameter is proportional to the average excitation energy of the intermediate states as described in the literature. The atomic form factors are simplified through a dipole expansion. Results are obtained in terms of an average excitation energy of the medium. Exemplary results for stopping in Al are presented for estimated values of the average excitation energy of the intermediate states. These results approach the classical and experimental values as the velocity of the penetrating particle increases, agreeing within 20% at beta = 0.3.

Morgan, S. H., Jr.↗