Search NASA⌕ Search

SEARCH · Search NASA

Results for “Doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Mn-induced ferromagnetism and enhanced thermoelectric properties in Ru 1- x Mn x Sb 2+ δ

We report the experimental investigation of Mn doping effect on the electrical, magnetic, and thermal properties of Ru 1-x Mn x Sb 2+δ single crystals. While RuSb 2+δ is a diamagnetic semiconductor, partial replacement of Ru by Mn results in ferromagnetism with the Curie temperature 536 K and 540 K for x = 0.04 and 0.08, respectively. Correspondingly, the electrical resistivity decreases dramatically and shows metallic character due to the increased electron concentration. Surprisingly, the magnitude of the thermopower increases upon Mn doping, reaching -250 μV K -1 at 300 K for x = 0.08, while the thermal conductivity remains unchanged above 100 K. These indicate a strong modification of electronic structure by doped Mn, leading to enhanced thermoelectric properties. The carriers induced by Mn not only decrease the resistivity, but also mediate the long-range ferromagnetic ordering in Ru 1-x Mn x Sb 2+δ .

36 MATERIALS SCIENCE↗

Enhanced Charge Transport and Stability Conferred by Iron(III)‐Coordination in a Conjugated Polymer Thin‐Film Transistors

Abstract A high performance diketopyrrolopyrrole (DPP)–based semiconducting polymer is modified with ligands to enable metal coordination, and its subsequent effect as field‐effect transistors is investigated. In specific, pyridine‐2,6‐dicarboxamide (PDCA) units are incorporated in a DPP–based polymer backbone with a content from 0 to 30 mol%, and the resulting polymers are then mixed with Fe(II) ions. The coordination and spontaneous oxidation converts Fe(II) to Fe(III) ions to result in Fe(III)‐containing metallopolymers. The resulting metallopolymers are observed to show good solubility in organic solvents and can be easily processed as thin films. The charge transport characteristics are subsequently investigated through the fabrication of field–effect transistor devices, in which an enhanced charge carrier mobility with the Fe(III)‐containing metallopolymers is observed. In specific, an almost twofold improvement in the charge carrier mobility is obtained for the 20% PDCA‐containing polymer after Fe coordination (from 0.96 to 1.84 cm 2 V −1 s −1 ). Furthermore, the operation stability of the metallopolymer‐based devices is found to be significantly improved with low bias stress. Its superior electrical characteristics are attributed to the doping effect of the Fe ions. This study indicates that incorporation of appropriate metallic ions to polymer presents a viable approach to enhance the performance of polymer–based transistor devices.

Wu, Hung‐Chin↗

Photo-Seebeck effect in tetragonal PbO single crystals

We report the observation of photo-Seebeck effect in tetragonal PbO crystals. The photo-induced carriers contribute to the transport phenomena, and consequently the electrical conductivity increases and the Seebeck coefficient decreases with increasing photon flux density. A parallel-circuit model is used to evaluate the actual contributions of photo-excited carriers from the measured transport data. The photo-induced carrier concentration estimated from the Seebeck coefficient increases almost linearly with increasing photon flux density, indicating a successful photo-doping effect on the thermoelectric property. The mobility decreases by illumination but the reduction rate strongly depends on the illuminated photon energy. Possible mechanisms of such photon-energy-dependent mobility are discussed.

36 MATERIALS SCIENCE↗

Surfactant mediated hydrothermal synthesis, characterization and luminescent properties of GdPO{sub 4}: Ce{sup 3+}/Tb{sup 3+} @ GdPO{sub 4} core shell nanorods

Highlights: • Core shell nanorods were synthesised by surfactant assisted hydrothermal method. • Morphology of core shell nanorods resembles those of core nanorods indicating coating of shell on cores. • More uniform and non-aggregated core shell nanorods were prepared in presence of surfactants. • Surfactant assisted prepared core shell nanorods show intense emission as compared to uncoated core nanorods. - Abstract: Core shell GdPO{sub 4}: Ce{sup 3+}/Tb{sup 3+} @ GdPO{sub 4} nanorods were synthesized via hydrothermal route in the presence of different surfactants [cetyltrimethyl ammonium bromide (CTAB) and Sodium dodecyl sulphate (SDS)]. The nanorods were characterized by powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and photoluminescence (PL) studies. The X-ray diffraction results indicate good crystallinity and effective doping in core and core shell nanorods. SEM and TEM micrographs show that all of the as prepared gadolinium phosphate products have rod like shape. The compositional analysis of GdPO{sub 4}: Ce{sup 3+}/Tb{sup 3+} core was done by EDS. The emission intensity of the GdPO{sub 4}: Ce{sup 3+}/Tb{sup 3+} @ GdPO{sub 4} core shell increased significantly with respect to those of GdPO{sub 4}: Ce{sup 3+}/Tb{sup 3+} core nanorods. The effect of surfactant on the uniformity, thickness and luminescence of the core shell nanorods was investigated.

36 MATERIALS SCIENCE↗

Tuning the metal-insulator transition via epitaxial strain and Co doping in NdNiO{sub 3} thin films grown by polymer-assisted deposition

The epitaxial NdNi{sub 1-x}Co{sub x}O{sub 3} (0 ≤ x ≤ 0.10) thin films on (001) LaAlO{sub 3} and (001) SrTiO{sub 3} substrates were grown by a simple polymer-assisted deposition technique. The co-function of the epitaxial strain and Co doping on the metal-insulator transition in perovskite nickelate NdNiO{sub 3} thin films is investigated. X-ray diffraction and scanning electron microscopy reveal that the as-prepared thin films exhibit good crystallinity and heteroepitaxy. The temperature dependent resistivities of the thin films indicate that both the epitaxial strain and Co doping lower the metal-insulator (MI) transition temperature, which can be treated as a way to tune the MI transition. Furthermore, under the investigated Co-doping levels, the MI transition temperature (T{sub MI}) shifts to low temperatures with Co content increasing under both compressive and tensile strain, and the more distinction is in the former situation. When x is increased up to 0.10, the insulating phase is completely suppressed under the compressive strain. With the strain increases from compression to tension, the resistivities are enhanced both in the metal and insulating regions. However, the Co-doping effect on the resistivity shows a more complex situation. As Co content x increases from zero to 0.10, the resistivities are reduced both in the metal and insulating regions under the tensile strain, whereas they are enhanced in the high-temperature metal region under the compressive strain. Based on the temperature dependent resistivity in the metal regions, it is suggested that the electron-phonon coupling in the films becomes weaker with the increase of both the strain and Co-doping.

36 MATERIALS SCIENCE↗

Synthesis and Application of 1,3,4,5,7,8-Hexafluorotetracyanonaphthoquinodimethane (F6-TNAP): A Conductivity Dopant for Organic Light-Emitting Devices

We report the synthesis, photophysical and organic light-emitting device (OLED) properties of an organic molecular p-dopant 1,3,4,5,7,8-hexafluorotetracyanonaphthoquinodimethane (F6-TNAP). F6-TNAP was obtained in a three step 2 pot synthesis from commercially available octafluoronaphthalene. Doping effect of F6-TNAP was evaluated using films of 1-5% F6-TNAP with N,N'-di-1-naphthyl-N,N'-diphenyl-1,1'-biphenyl-4,4'diamineα-NPD) co-evaporated on quartz. UV-vis analysis of these films showed an absorption peak at 950 nm corresponding to the charge transfer complex resulting from electron transfer from α-NPD to F6-TNAP. Hole only devices using α-NPD as the hole transport layer (HTL) doped with F6-TNAP show greater than 2V decrease in operating voltage compared to the undoped device. A decrease in operating voltage was also demonstrated in blue OLED devices using F6-TNAP doped HTL, with a slight decrease in external quantum efficiency (EQE), thus resulting in a net improvement in power efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of neodymium doping on structure, electrical and optical properties of nanocrystalline ZnO

In this paper, we report effect of Nd doping on structure, electrical and optical properties of nanocrystalline ZnO prepared through a modified ceramic route. The X-ray diffraction and transmission electron microscopy studies reveal that annealed samples are single phase, pure nanocrystalline ZnO. The optical band gap for different compositions, estimated from ultraviolet-visible spectroscopy study, shows a little increasing tendency while doped with Nd for the samples annealed at lower temperature. The dc electrical conductivity of the samples decreases with the increase in Nd concentration. The ac electrical measurements prove the hopping conduction as the dominant mechanism. The results are being explained on the basis of band structural change due to Nd doping in the host lattice and by Correlated Barrier Hopping model. - Highlights: Black-Right-Pointing-Pointer Particle size increases when it is doped (from XRD). Black-Right-Pointing-Pointer XRD peak shifted to lower angle when doped. Black-Right-Pointing-Pointer The dc conductivity decreases with the increase of Nd dopant concentrations. Black-Right-Pointing-Pointer The temperature dependent ac conductivity follows the universal power law.

36 MATERIALS SCIENCE↗

Energetics of CO 2 and H 2 O adsorption on alkaline earth metal doped TiO 2

The process of CO 2 and H 2 O adsorption on the surface of nano-oxide semiconductors is important in the overall performance of artificial photosynthesis and other applications. In this study, we explored the thermodynamics of CO 2 and H 2 O adsorption on TiO 2 as a function of surface chemistry. We applied gas adsorption calorimetry to investigate the energetics of adsorption of those molecules on the surface of anatase nanoparticles. In an attempt to increase TiO 2 surface affinity to CO 2 and H 2 O, TiO 2 was doped with alkaline earth metals (MgO, CaO, SrO, and BaO) by manipulating the chemical synthesis. Adsorption studies using diffuse reflectance infrared spectroscopy at different temperatures indicate that due to the segregation of alkaline earth metals on the surface of TiO 2 nanoparticles, both CO 2 and subsequent H2O adsorption amounts could be increased. CO 2 adsorbs in two different manners, forming carbonates which can be removed at temperatures lower than 700 °C, and a more stable linear adsorption that remains even at 700 °C. Additionally to the surface energetic effects, doping also increased specific surface area, resulting in further improvement in net gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rich structural phase diagram and thermoelectric properties of layered tellurides Mo{sub 1−x}Nb{sub x}Te{sub 2}

MoTe{sub 2} is a rare transition-metal ditelluride having two kinds of layered polytypes, hexagonal structure with trigonal prismatic Mo coordination and monoclinic structure with octahedral Mo coordination. The monoclinic distortion in the latter is caused by anisotropic metal-metal bonding. In this work, we have examined the Nb doping effect on both polytypes of MoTe{sub 2} and clarified a structural phase diagram for Mo{sub 1−x}Nb{sub x}Te{sub 2} containing four kinds of polytypes. A rhombohedral polytype crystallizing in polar space group has been newly identified as a high-temperature metastable phase at slightly Nb-rich composition. Considering the results of thermoelectric measurements and the first-principles calculations, the Nb ion seemingly acts as a hole dopant in the rigid band scheme. On the other hand, the significant interlayer contraction upon the Nb doping, associated with the Te p-p hybridization, is confirmed especially for the monoclinic phase, which implies a shift of the p-band energy level. The origin of the metal-metal bonding in the monoclinic structure is discussed in terms of the d electron counting and the Te p-p hybridization.

36 MATERIALS SCIENCE↗

Manipulation of the graphene surface potential by ion irradiation

We show that the work function of exfoliated single layer graphene can be modified by irradiation with swift (E{sub kin}=92 MeV) heavy ions under glancing angles of incidence. Upon ion impact individual surface tracks are created in graphene on silicon carbide. Due to the very localized energy deposition characteristic for ions in this energy range, the surface area which is structurally altered is limited to Almost-Equal-To 0.01 {mu}m{sup 2} per track. Kelvin probe force microscopy reveals that those surface tracks consist of electronically modified material and that a few tracks suffice to shift the surface potential of the whole single layer flake by Almost-Equal-To 400 meV. Thus, the irradiation turns the initially n-doped graphene into p-doped graphene with a hole density of 8.5 Multiplication-Sign 10{sup 12} holes/cm{sup 2}. This doping effect persists even after heating the irradiated samples to 500 Degree-Sign C. Therefore, this charge transfer is not due to adsorbates but must instead be attributed to implanted atoms. The method presented here opens up a way to efficiently manipulate the charge carrier concentration of graphene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-performance multilayer WSe 2 field-effect transistors with carrier type control

In this paper, high-performance multilayer WSe 2 field-effect transistor (FET) devices with carrier type control are demonstrated via thickness modulation and a remote oxygen plasma surface treatment. Carrier type control in multilayer WSe 2 FET devices with Cr/Au contacts is initially demonstrated by modulating the WSe 2 thickness. The carrier type evolves with increasing WSe 2 channel thickness, being p-type, ambipolar, and n-type at thicknesses <3, ~4, and >5 nm, respectively. The thickness-dependent carrier type is attributed to changes in the bandgap of WSe 2 as a function of the thickness and the carrier band offsets relative to the metal contacts. Furthermore, we present a strong hole carrier doping effect via remote oxygen plasma treatment. It non-degenerately converts n-type characteristics into p-type and enhances field-effect hole mobility by three orders of magnitude. Finally, this work demonstrates progress towards the realization of high-performance multilayer WSe 2 FETs with carrier type control, potentially extendable to other transition metal dichalcogenides, for future electronic and optoelectronic applications.

36 MATERIALS SCIENCE↗

High performance top-gated multilayer WSe2 field effect transistors

In this paper, high performance top-gated WSe 2 field effect transistor (FET) devices are demonstrated via a two-step remote plasma assisted ALD process. High-quality, low-leakage aluminum oxide (Al 2 O 3 ) gate dielectric layers are deposited onto the WSe 2 channel using a remote plasma assisted ALD process with an ultrathin (~1 nm) titanium buffer layer. The first few nanometers (~2 nm) of the Al 2 O 3 dielectric film is deposited at relatively low temperature (i.e. 50 °C) and remainder of the film is deposited at 150 °C to ensure the conformal coating of Al 2 O 3 on the WSe 2 surface. Additionally, an ultra-thin titanium buffer layer is introduced at the WSe2 channel surface prior to ALD process to mitigate oxygen plasma induced doping effects. Excellent device characteristics with current on–off ratio in excess of 106 and a field effect mobility as high as 70.1 cm 2 V –1 s –1 are achieved in a few-layer WSe 2 FET device with a 30 nm Al 2 O 3 top-gate dielectric. With further investigation and careful optimization, this method can play an important role for the realization of high performance top gated FETs for future optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced thermoelectric performance of Mg 2 Si 1-x Sn x codoped with Bi and Cr

Magnesium silicides are favorable thermoelectric materials considering resource abundance and cost. Chromium (Cr) doping in magnesium silicides has not yet been explored. Using first-principles calculations, we have studied the stability of Mg 2 Si with chromium (1.85, 3.7, 5.55, and 6.25% Cr) and tin (12.5 and 50% Sn). Three Mg 2 Si compounds doped with Sn, (Sn + Bi), and (Sn + Bi + Cr) are used to explain doping effects on thermoelectric performance. Notably, Cr behaves nonmagnetically for ≤2%Cr, after which ferromagnetic ordering is favored (≤12.96% Cr), despite its elemental antiferromagnetic state. With alloying of Sn (70.4%), Mg 2 Si remains an indirect-band-gap semiconductor, but adding small amounts of Bi (3.7%) increases the carrier concentration such that electrons occupy conduction bands, making it a degenerate semiconductor. Mg 2 Si 0.296 Sn 0.666 Bi 0.037 is found to give the highest thermoelectric figure of merit (ZT) and power factor (PF) at 700 K, i.e., 1.75 and 7.04 mWm –1 K –2 , respectively. Adding small %Cr decreases ZT and PF to 0.78 and 4.33 mWm –1 K –2 , respectively. Such a degradation in thermoelectric (TE) performance is attributed to two factors: (i) uniform doping acting as an electron acceptor, decreasing conduction, and (ii) the loss of low-lying conduction band degeneracy with doping, decreasing the Seebeck coefficients. In conclusion, a study of configurations of Cr doping suggests that Cr has a tendency to form clusters inside the lattice, which play a crucial role in tuning the magnetic and TE performance of doped Mg 2 Si compounds.

36 MATERIALS SCIENCE↗

Oxygen incorporation effects in annealed epitaxial La{sub (1-x)}Sr{sub x}MnO{sub 3} thin films

This paper presents our results regarding oxygen incorporation effects in epitaxial La{sub (1-x)}Sr{sub x}MnO{sub 3} thin films, deposited on SrTiO{sub 3} (001) single crystal substrates, by annealing in different gas mixtures of argon and oxygen. A particular emphasis is placed on the correlation of structural properties with the magnetic properties of the films, Curie temperature, and coercive field. In this sense, we demonstrate that the evolution of the diffuse part of the {omega}-scans performed on the films are due to oxygen excess in the film lattice, which creates cationic vacancies within the films. Also, we show that two regimes of oxygen incorporation in the films exist, one in which the films evolve toward a single phase and oxygen stoichiometry is recovered, and a second one dominated by oxygen over-doping effects. In order to support our study, XPS measurements were performed, from which we have evaluated the Mn{sup 3+}/Mn{sup 4+} ionic ratio.

36 MATERIALS SCIENCE↗

Synthesis and evaluation of lead telluride/bismuth antimony telluride nanocomposites for thermoelectric applications

Heterogeneous nanocomposites of p-type bismuth antimony telluride (Bi{sub 2-x}Sb{sub x}Te{sub 3}) with lead telluride (PbTe) nanoinclusions have been prepared by an incipient wetness impregnation approach. The Seebeck coefficient, electrical resistivity, thermal conductivity and Hall coefficient were measured from 80 to 380 K in order to investigate the influence of PbTe nanoparticles on the thermoelectric performance of nanocomposites. The Seebeck coefficients and electrical resistivities of nanocomposites decrease with increasing PbTe nanoparticle concentration due to an increased hole concentration. The lattice thermal conductivity decreases with the addition of PbTe nanoparticles but the total thermal conductivity increases due to the increased electronic thermal conductivity. We conclude that the presence of nanosized PbTe in the bulk Bi{sub 2-x}Sb{sub x}Te{sub 3} matrix results in a collateral doping effect, which dominates transport properties. This study underscores the need for immiscible systems to achieve the decreased thermal transport properties possible from nanostructuring without compromising the electronic properties. - Graphical abstract: PbTe nanoparticles introduced into p-type Bi{sub 2}Te{sub 3} by incipient wetness results in decreased lattice thermal conductivity, but also acts as an electronic dopant, resulting in an overall decrease in thermoelectric performance. Highlights: Black-Right-Pointing-Pointer Composites of PbTe nanoparticles in Bi{sub 2-x}Sb{sub x}Te{sub 3} were formed by incipient wetness. Black-Right-Pointing-Pointer PbTe nanoparticles leads to decreased {kappa}{sub l}, consistent with phonon scattering. Black-Right-Pointing-Pointer PbTe nanoparticles lead to decreased S and {rho}, due to increased carriers. Black-Right-Pointing-Pointer Collateral doping from PbTe leads to decreased ZT with increasing concentration. Black-Right-Pointing-Pointer Immiscible systems are preferred for improved ZT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Assessment of ZnTe and CdSe as Prospective Tunnel Barriers at the InAs/Al Interface

Majorana zero modes are predicted to emerge in semiconductor/ superconductor interfaces, such as InAs/Al. Majorana modes could be utilized for fault tolerant topological qubits. However, their realization is hindered by materials challenges. The coupling between the superconductor and the semiconductor may be too strong for Majorana modes to emerge, due to effective doping of the semiconductor by the metallic contact. This could be mediated by adding a tunnel barrier of controlled thickness. We use density functional theory (DFT) with Hubbard U corrections, whose values are machine-learned via Bayesian optimization (BO), to assess ZnTe and CdSe as prospective tunnel barriers for the InAs/Al interface. The results of DFT +U(BO) for ZnTe are validated by comparison to angle resolved photoemission spectroscopy (ARPES). We then study bilayer interfaces of the three semiconductors with each other and with Al, as well as trilayer interfaces with a varying number of ZnTe or CdSe layers inserted between InAs and Al. We find that 16 atomic layers of either material completely insulate the InAs from metal induced gap states (MIGS). However, ZnTe and CdSe differ significantly in their band alignment, such that ZnTe forms an effective barrier for electrons, whereas CdSe forms a barrier for holes. Because of Fermi level pinning in the conduction band at the interface, only electron transport is relevant for InAs-based Majorana devices. Therefore, ZnTe is the better choice. Based on the results of our simulations, we suggest conducting experiments with ZnTe barriers in the thickness range of 6–18 atomic layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗