Search NASA⌕ Search

SEARCH · Search NASA

Results for “Drying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Bend strengths of reaction bonded silicon nitride prepared from dry attrition milled silicon powder

Dry attrition milled silicon powder was compacted, sintered in helium, and reaction bonded in nitrogen-4 volume percent hydrogen. Bend strengths of bars with as-nitrided surfaces averaged as high as 210 MPa at room temperature and 220 MPa at 1400 C. Bars prepared from the milled powder were stronger than those prepared from as-received powder at both room temperature and at 1400 C. Room temperature strength decreased with increased milling time and 1400 C strength increased with increased milling time.

Herbell, T. P.↗
NASA NTRS1979

Behavior of aircraft antiskid braking systems on dry and wet runway surfaces. A slip-velocity-controlled, pressure-bias-modulated system

The braking and cornering response of a slip velocity controlled, pressure bias modulated aircraft antiskid braking system is investigated. The investigation, conducted on dry and wet runway surfaces, utilized one main gear wheel, brake, and tire assembly of a McDonnell Douglas DC 9 series 10 airplane. The landing gear strut was replaced by a dynamometer. The parameters, which were varied, included the carriage speed, tire loading, yaw angle, tire tread condition, brake system operating pressure, and runway wetness conditions. The effects of each of these parameters on the behavior of the skid control system is presented. Comparisons between data obtained with the skid control system and data obtained from single cycle braking tests without antiskid protection are examined.

Stubbs, S. M.↗
NASA NTRS1981

Comparing dry aerosol size measurements

Two instruments were used to size dry aerosols for the CCN experiments: the Naval Research Laboratory (NRL) instrument which uses an electrical mobility analyzer to separate the aerosol size fractions and a diffusion chamber to grow and count the particles and the University of Wyoming (WYO) aerosol monitoring system. Measurements from these two systems were usually found to be in agreement during the CCN Workshop. Two examples are presented to compare aerosol size distribution measurements of the two instruments: experiment 8 (monodisperse NaCl) and experiment 27 (polydisperse AgI). Differential (dN/dR) and cumulative plots are shown for both instruments for experiment 8 and experiment 27; also shown are Aitken particle measurements for comparison.

Rogers, D. C.↗
NASA NTRS1981

Determination of water-soluble ions in soils from the dry valleys of Antarctica

The soil chemistry of the dry valleys of Antarctica was studied. These valleys furnish a terrestrial analog for the surface of Mars. The abundance of the water-soluble ions magnesium, calcium, potassium, sodium chloride, and nitrate in soil samples was determined. All samples examined contained water-soluble salts reflecting the aridity of the area. Movement of salts to low-lying areas was verified. Upward ionic migration was evident in all core samples. Of all cations observed, sodium showed the greatest degree of migration.

Bustin, R.↗
NASA NTRS1978

Torque vs. induced load of A-286, and MP35N nuts and bolts with cadmium, dry film, and cetyl alcohol lubricants

Data for specific joint design, utilizing various combinations of bolt, nut and lubricants in typical structure of the shuttle booster rocket is obtained. Requirements of the structure performance criteria were to withstand temperatures of 260 C (500 F) and to provide a nut lubricant which would be compatible with sealants used in the joint. Cadmium plating and dry film lubricant meeting the requirements of MIL-L-8937 were the lubricants specified. In a follow up effort, cadmium plating and cetyl alcohol were further specified The materials for the bolt and nut combinations were MP35N and A-286. These materials demand a lubricant to be used to prevent galling of the thread when tightened and also to help reduce the scatter of clamping load in application.

Crispell, C.↗
NASA NTRS1981

A dry-surface coating method for visualization of separation

A simple and reasonably accurate dry-surface coating method for the visualization of the separation line on a bluff body is described. This method is not restricted to any particular Reynolds-number range and it supplies a clear permanent record of good photographic quality. Examination of this technique in visualizing the separation angle on a circular cylinder indicated that it is accurate within about + or - 4 percent.

Sadeh, W. Z.↗
NASA NTRS1984

Drying Milk With Boiler Exhaust

Considerable energy saved in powdered-milk industry. Only special requirement boiler fired with natural gas or other clean fuel. Boiler flue gas fed to spray drier where it directly contacts product to be dried. Additional heat supplied by auxillary combustor when boiler output is low. Approach adaptable to existing plants with minimal investment because most already equipped with natural-gas-fired boilers.

Broussard, M. R.↗
NASA NTRS1982

Fundamental aspects of polyimide dry film and composite lubrication: A review

The tribological properties of polyimide dry films and composites are reviewed. Friction coefficients, wear rates, transfer film characteristics, wear surface morphology, and possible wear mechanisms of several different polyimide films, polyimide-bonded solid lubricants, polyimide solid bodies, and polyimide composites are discussed. Such parameters as temperature, type of atmosphere, load, contact stress, and specimen configuration are investigated. Data from an accelerated test device (Pin-on-Disk) are compared to similar data obtained from an end use application test device (plain spherical bearing).

Fusaro, R. L.↗
NASA NTRS1982

Microbial ecology of extreme environments: Antarctic dry valley yeasts and growth in substrate-limited habitats

The success of the Antarctic Dry Valley yeasts presumeably results from adaptations to multiple stresses, to low temperatures and substrate-limitation as well as prolonged resting periods enforced by low water availability. Previous investigations have suggested that the crucial stress is substrate limitation. Specific adaptations may be pinpointed by comparing the physiology of the Cryptococcus vishniacii complex, the yeasts of the Tyrol Valley, with their congeners from other habitats. Progress was made in methods of isolation and definition of ecological niches, in the design of experiments in competition for limited substrate, and in establishing the relationships of the Cryptococcus vishniacii complex with other yeasts. In the course of investigating relationships, a new method for 25SrRNA homology was developed. For the first time it appears that 25SrRNA homology may reflect parallel or convergent evolution.

Vishniac, H. S.↗
NASA NTRS1983

Satellite remote sensing of total dry matter production in the Senegalese Sahel

Nine predominantly cloud-free NOAA-7 advanced very high resolution radiometer images were obtained during a three-month period during the 1981 rainy season in the Sahel of Senegal. The 0.55-0.68- and 0.725-1.10-micron channels were used to form the normalized difference green leaf density vegetation index and the 11.5-12.5-micron channel was used as a cloud mask for each of the nine images. Changes in the normalized difference values among the various dates were closely associated with precipitation events. Six of the images spanning an 8-week period were used to generate a cumulative integrated index. Ground biomas samplings in the 30,000 sq km study area were used to assign total dry biomass classes to the cumulative index.

Tucker, C. J.↗
NASA NTRS1984

Combustion Gas Properties I-ASTM Jet a Fuel and Dry Air

A series of computations was made to produce the equilibrium temperature and gas composition for ASTM jet A fuel and dry air. The computed tables and figures provide combustion gas property data for pressures from 0.5 to 50 atmospheres and equivalence ratios from 0 to 2.0.

Jones, R. E.↗
NASA NTRS1985

Combustion gas properties. 2: Natural gas fuel and dry air

A series of computations has been made to produce the equilibrium temperature and gas composition for natural gas fuel and dry air. The computed tables and figures provide combustion gas property data for pressures from 0.5 to 50 atmospheres and equivalence ratios from 0 to 2.0. Only samples tables and figures are provided in this report. The complete set of tables and figures is provided on four microfiche films supplied with this report.

Wear, J. D.↗
NASA NTRS1985

Combustion gas properties. Part 3: Hydrogen gas fuel and dry air

A series of computations has been made to produce the equilibrium temperature and gas composition for hydrogen gas fuel and dry air. The computed tables and figures provide combustion gas property data for pressures from 0.5 to 50 atmospheres and equivalence ratios from 0 to 2.0. Only sample tables and figures are provided in this report.

Wear, J. D.↗
NASA NTRS1984

Regional analysis from data from heterogeneous pixels - Remote sensing of total dry matter production in the Senegalese Sahel

Nine predominantly cloud-free NOAA-7 advanced very high resolution radiometer images were obtained during a three-month period during the 1981 rainy season in the Sahel of Senegal. The 0.55-0.68 and 0.725-1.10-micron channels were used to form the normalized difference green leaf density vegetation index and the 11.5-12.5-micron channel was used as a cloud mask for each of the nine images. Changes in the normalized difference values among the various dates were closely associated with precipitation events. Six of the images spanning an eight-week period were used to generate a cumulative integrated index. Ground biomass samplings in the 30,000 sq km study area were used to assign total dry biomass classes to the cumulative index.

Tucker, C. J.↗
NASA NTRS1986

Fuel-Cell Structure Prevents Membrane Drying

Embossed plates direct flows of reactants and coolant. Membrane-type fuel-cell battery has improved reactant flow and heat removal. Compact, lightweight battery produces high current and power without drying of membranes.

Mcelroy, J.↗
NASA NTRS1986

Dry etching of beta-SiC in CF4 and CF4 + O2 mixtures

Dry etching of cubic (100) beta-SiC single-crystal thin films produced via chemical-vapor deposition (CVD) has been performed in CF4 and CF4 + O2 mixtures, in both the reactive-ion-etching (RIE) and plasma-etching modes. The latter process yielded measurable etch rates, but produced a dark surface layer which appears, from the results of secondary-ion mass spectrometry, to be residual SiC. The RIE samples had no residual layer, but Auger electron spectroscopy did reveal a C-rich surface. The optimal RIE conditions were obtained with 10 sccm of pure CF4 at 40 mtorr and a power density of 0.548 W/sq cm, giving an etch rate of 23.3 nm/min. Neither the increase of temperature between 293 and 573 K, nor the incremental addition of O2 to CF4 to 50 percent, produced any strong effect on the etch rates of SiC during RIE. Pictorial evidence of fine line structures produced by RIE of beta-SiC films are also presented.

Palmour, J. W.↗
NASA NTRS1986

A particle dry-deposition parameterization scheme for use in tracer transport models

A parameterization scheme for the dry deposition of aerosol particles for use in tracer transport models is presented. Expressions of the particle deposition velocities relative to the bottom transport model level are derived for smooth surfaces, surfaces with bluff roughness elements, ocean surfaces, and vegetative canopies. The scheme is applied to a general circulation model to calculate the deposition velocities of ambient tropospheric aerosols. The calculated deposition velocities show a strong dependence upon the wind field in the bottom model level, the particle size distribution, and the surface type.

Giorgi, F.↗