SEARCH · Search NASA

Results for “Dust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Atmospheric Dust Modeling from Meso to Global Scales with the Online NMMB/BSC-Dust Model Part 2: Experimental Campaigns in Northern Africa

The new NMMB/BSC-Dust model is intended to provide short to medium-range weather and dust forecasts from regional to global scales. It is an online model in which the dust aerosol dynamics and physics are solved at each model time step. The companion paper (Perez et al., 2011) develops the dust model parameterizations and provides daily to annual evaluations of the model for its global and regional configurations. Modeled aerosol optical depth (AOD) was evaluated against AERONET Sun photometers over Northern Africa, Middle East and Europe with correlations around 0.6-0.7 on average without dust data assimilation. In this paper we analyze in detail the behavior of the model using data from the Saharan Mineral dUst experiment (SAMUM-1) in 2006 and the Bodele Dust Experiment (BoDEx) in 2005. AOD from satellites and Sun photometers, vertically resolved extinction coefficients from lidars and particle size distributions at the ground and in the troposphere are used, complemented by wind profile data and surface meteorological measurements. All simulations were performed at the regional scale for the Northern African domain at the expected operational horizontal resolution of 25 km. Model results for SAMUM-1 generally show good agreement with satellite data over the most active Saharan dust sources. The model reproduces the AOD from Sun photometers close to sources and after long-range transport, and the dust size spectra at different height levels. At this resolution, the model is not able to reproduce a large haboob that occurred during the campaign. Some deficiencies are found concerning the vertical dust distribution related to the representation of the mixing height in the atmospheric part of the model. For the BoDEx episode, we found the diurnal temperature cycle to be strongly dependant on the soil moisture, which is underestimated in the NCEP analysis used for model initialization. The low level jet (LLJ) and the dust AOD over the Bodélé are well reproduced. The remaining negative AOD bias (due to underestimated surface wind speeds) can be substantially reduced by decreasing the threshold friction velocity in the model.

photometers↗

NASA NTRS2016

High Latitude Dust in the Earth System

Natural dust is often associated with hot, subtropical deserts, but significant dust events have been reported from cold, high latitudes. This review synthesizes current understanding of high-latitude (> or = 50degN and > or = 40degS) dust source geography and dynamics and provides a prospectus for future research on the topic. Although the fundamental processes controlling aeolian dust emissions in high latitudes are essentially the same as in temperate regions, there are additional processes specific to or enhanced in cold regions. These include low temperatures, humidity, strong winds, permafrost and niveo-aeolian processes all of which can affect the efficiency of dust emission and distribution of sediments. Dust deposition at high latitudes can provide nutrients to the marine system, specifically by contributing iron to high-nutrient, low-chlorophyll oceans; it also affects ice albedo and melt rates. There have been no attempts to quantify systematically the expanse, characteristics, or dynamics of high-latitude dust sources. To address this, we identify and compare the main sources and drivers of dust emissions in the Northern (Alaska, Canada, Greenland, and Iceland) and Southern (Antarctica, New Zealand, and Patagonia) Hemispheres. The scarcity of year-round observations and limitations of satellite remote sensing data at high latitudes are discussed. It is estimated that under contemporary conditions high-latitude sources cover >500,000 sq km and contribute at least 80-100 Tg/yr1 of dust to the Earth system (approx. 5% of the global dust budget); both are projected to increase under future climate change scenarios.

albedo↗

NASA NTRS2016

Role of Surface Wind and Vegetation Cover in Multi-decadal Variations of Dust Emission in the Sahara and Sahel

North Africa, the world's largest dust source, is non-uniform, consisting of a permanently arid region (Sahara), a semi-arid region (Sahel), and a relatively moist vegetated region (Savanna), each with very different rainfall patterns and surface conditions. This study aims to better understand the controlling factors that determine the variation of dust emission in North Africa over a 27-year period from 1982 to 2008, using observational data and model simulations. The results show that the model-derived Saharan dust emission is only correlated with the 10-m winds (W10m) obtained from reanalysis data, but the model-derived Sahel dust emission is correlated with both W10m and the Normalized Difference Vegetation Index (NDVI) that is obtained from satellite. While the Saharan dust accounts for 82 of the continental North Africa dust emission (1340-1570 Tg year(exp -1) in the 27-year average, the Sahel accounts for 17 with a larger seasonal and inter-annual variation (230-380 Tg year(exp -1), contributing about a quarter of the transatlantic dust transported to the northern part of South America. The decreasing dust emission trend over the 27-year period is highly correlated with W10m over the Sahara (R equals 0.92). Over the Sahel, the dust emission is correlated with W10m (R 0.69) but is also anti-correlated with the trend of NDVI (R equals 0.65). W10m is decreasing over both the Sahara and the Sahel between 1982 and 2008, and the trends are correlated (R equals 0.53), suggesting that Saharan Sahelian surface winds are a coupled system, driving the inter-annual variation of dust emission.

Inter-annual variation↗

NASA NTRS2018

A Detailed Characterization of the Saharan Dust Collected During the Fennec Campaign in 2011: In Situ Ground-Based and Laboratory Measurements

Millions of tons of mineral dust are lifted by the wind from arid surfaces and transported around the globe every year. The physical and chemical properties of the mineral dust are needed to better constrain remote sensing observations and are of fundamental importance for the understanding of dust atmospheric processes. Ground-based in situ measurements and in situ filter collection of Saharan dust were obtained during the Fennec campaign in the central Sahara in 2011. This paper presents results of the absorption and scattering coefficients, and hence single scattering albedo (SSA), of the Saharan dust measured in real time during the last period of the campaign and subsequent laboratory analysis of the dust samples collected in two supersites, SS1 and SS2, in Algeria and in Mauritania, respectively. The samples were taken to the laboratory, where their size and aspect ratio distributions, mean chemical composition, spectral mass absorption efficiency, and spectral imaginary refractive index were obtained from the ultraviolet (UV) to the near-infrared (NIR) wavelengths. At SS1 in Algeria, the time series of the scattering coefficients during the period of the campaign show dust events exceeding 3500 Mm (exp -1), and a relatively high mean SSA of 0.995 at 670 nm was observed at this site. The laboratory results show for the fine particle size distributions (particles diameter <5μm and mode diameter at2–3 μm) in both sites a spectral dependence of the imaginary part of the refractive index Im(m) with a bow-like shape, with increased absorption in UV as well as in the shortwave infrared. The same signature was not observed, however, in the mixed particle size distribution (particle diameter<10 μm and mode diameter at 4 μm) in Algeria. Im(m) was found to range from 0.011 to 0.001i for dust collected in Algeria and 0.008 to 0.002i for dust collected in Mauritania over the wavelength range of 350-2500 nm. Differences in the mean elemental composition of the dust collected in the supersites in Algeria and in Mauritania and between fine and mixed particle size distributions were observed from EDXRF measurements, although those differences cannot be used to explain the optical properties variability between the samples. Finally, particles with low-density typically larger than 10 μm in diameter were found in some of the samples collected at the supersite in Mauritania, but these low-density particles were not observed in Algeria.

Saharan dust measured in real time↗

NASA NTRSDate not supplied

An Overview of LO-DuSST (Lunar Occupancy Dust Surface Separation Technologies) Objectives

Of the myriad of issues facing lunar exploration and maintaining an extended lunar presence, lunar dust is possibly the most pervasive. These jagged, chemically reactive, electrostatically charged, sometimes magnetic particles can impact every aspect of a lunar surface mission ranging from abrading extra-vehicular activity (EVA) suits to disrupting lunar vehicle thermal management systems to impeding efficacy of excavation equipment to impacting lunar inhabitant health. NASA’s Lunar Occupancy Dust Surface Separation Technologies (LO-DuSST) task, as a part of the broader Lunar Surface Innovation Initiative (LSII) project, seeks to implement synergistic active and passive lunar dust management and mitigation technologies for an array of applications. One such application is protection of power generation capabilities via solar panel arrays. Plasma dust lofting coupled with a piezoelectric-driven vibration technology will be demonstrated on solar panel surfaces contaminated with lunar dust simulant. Intrinsically low adhesion coatings will be applied to these surfaces to enhance dust removal. Electrostatic repulsion in confined geometries and materials to manage high velocity lunar dust wear will also be investigated. Collectively, these active and passive mitigation technologies will facilitate lunar surface operations including occupancy logistics, landing pad operations, power generation, and transportation. Initial results regarding lunar simulant-contaminated solar panel performance experiments, dust lofting using an electron beam, surface interactions of high velocity lunar dust arising from lunar lander plume-surface interactions, and lunar dust simulant-material interaction experiments will be discussed.

Lunar dust↗

NASA NTRS2023

Health and Safety Effects of Airborne Soil Dust in the Americas and Beyond

Risks associated with dust hazards are often underappreciated, a gap between the knowledge pool and public awareness that can be costly for impacted communities. This study reviews the emission sources and chemical, physical, and biological characteristics of airborne soil particles (dust) and their effects on human and environmental health and safety in the Pan-American region. American dust originates from both local sources (western United States, northern Mexico, Peru, Bolivia, Chile, and Argentina) and long-range transport from Africa and Asia. Dust properties, as well as the trends and interactions with criteria air pollutants, are summarized. Human exposure to dust is associated with adverse health effects, including asthma, allergies, fungal infections, and premature death. In the Americas, a well-documented and striking effect of soil dust is its association with Coccidioidomycosis, commonly known as Valley fever, an infection caused by inhalation of soil-dwelling fungi unique to this region. Besides human health, dust affects environmental health through nutrients that increase phytoplankton biomass, contaminants that diminish water supply and affect food (crops/fruits/vegetables and ready-to-eat meat), spread crop and marine pathogens, cause Valley fever among domestic and wild animals, transport heavy metals, radionuclides and microplastics, and reduce solar and wind power generation. Dust is also a safety hazard to road transportation and aviation, in the southwestern US where blowing dust is one of the deadliest weather hazards. To mitigate the harmful effects, coordinated regional and international efforts are needed to enhance dust observations and prediction capabilities, soil conservation measures, and Valley fever and other disease surveillance.

health↗

NASA NTRSDate not supplied

Variability in Modelled Airborne Dust Mineralogy Derived from Global Soil Composition Uncertainties

Dust aerosols consist on a variety of minerals with different physic and chemical properties. As such, they interact with short and long wave radiation, potentially form clouds, act as nutrients modulating biogeochemical cycles, or influence atmospheric chemistry, differently. Most current state-of-the-art Earth System Models (ESMs) neglect the complexity in dust composition, mainly due to computational constraints, but also to the existing uncertainties in the size resolved composition of parent soils, the resulting distribution of minerals in airborne dust, and the scarcity of observations to constrain them. Within this work, we assess the variability of global dust composition due to uncertainties in the characterization of the parent soil mineralogy. To that end, we consider two available global soil mineralogy atlases, developed by Claquin et al. (1999) –C1999- and Journet et al. (2014) –J2014-, which represent respectively 8 and 12 relevant minerals for climate (namely: illite, smectite/montmorillonite, kaolinite, calcite, gypsum, hematite, quartz, and feldspars in C1999, and those plus chlorite, vermiculite, goethite, and mica in J2014). Thanks to a recently developed feature of the MONARCH atmospheric-chemistry model, we are able to explicitly resolve the minerals’ atmospheric cycle. Therefore, we define two global experiments to assess changes on airborne dust composition attributed to the soil mineralogy assumptions and provide a measure of their variability. We also perform a preliminary evaluation of the global mineralogy results against available observations of mineral fractions in surface dust concentration. Our results will inform the climate modelling community about the potential variability in dust composition, an aspect that will gain relevance as ESMs continue growing in complexity and new processes to better characterize aerosols’ forcing or biogeochemical cycles are added. Further observational constraints, such as those that will derive from the EMIT NASA mission on soil composition or the FRAGMENT experimental campaigns on airborne dust characterization, will be key in the near future to improve our understanding of the impact of dust mineralogy on fundamental climate features.

Dust aerosols↗

NASA NTRSDate not supplied

On the Emitted Dust Size Distribution and Its Variability: Insights From A Field Campaign in an Ephemeral Lake of the Lower Drâa Valley, Moroccan Sahara

During the last decades the emitted particle size distribution (PSD) of dust and its variability have been actively discussed due to their effects on the Earth System. Some frameworks support a higher proportion of aggregate’s fragmentation as wind speed increases, while others suggest the PSD independence of wind speed and soil properties, at least up to ~10 µm. Constraining the size-resolved dust emission and its variability is key to reduce the uncertainty of Earth system models, but still requires further analysis. The ERC project FRAGMENT addresses these and other issues related to dust emission, dust mineralogical composition and its effects upon climate. In this context we conducted a one month field campaign in September 2019 at L’Bour, an ephemeral lake located in the Lower Drâa Valley, resulting in a detailed description of the soil, dust emission and meteorology. During the campaign saltation and dust emission were very frequent under two prevailing wind directions. Friction velocity varied around 0.15 ms⁻¹, with peaks close to 0.4 ms⁻¹, except for a peak of 0.6 ms⁻¹ coinciding with the arrival of one of the moist convective storms or haboobs that occurred during this period. We study the near-surface concentration and diffusive flux PSDs along with their variability up to ~19 µm in optical diameter (~21 µm in geometric dust diameter). As expected, we find significant differences between the concentration and diffusive flux PSDs, with the latter showing a higher proportion of coarse and super-coarse particles. Our results also highlight dependencies of the PSDs with friction velocity, wind direction, and type of event (regular events vs haboob outflow events). We first discuss the potential origin of the variations and dependencies, which include 1) differences in fetch and surface between directions, 2) dry deposition of coarse and super-coarse dust depending on friction velocity, 3) more disaggregation with increasing friction velocity, and 4) the effect of the haboob gust front. Our calculations show the influence of dry deposition upon the diffusive flux PSDs. We finally compare our PSDs with brittle fragmentation theory, both with the original 2011 formulation using optical diameters, and with the more recent 2022 formulation including the emission of super-coarse dust and using geometric diameters.

particle size distribution↗

DOE OSTI2025

Dust Direct Radiative Effect Including Large Particles and Component Minerals

The direct radiative effect (DRE) of dust aerosols in Earth system models (ESMs) remains highly uncertain, largely due to inadequate representations of particle size distribution (PSD) and mineral composition. Using NASA's Earth Surface Mineral Dust Source Investigation (EMIT) soil mineralogy data and observed PSD in an ESM that resolves dust mineral composition and emitted diameters from 0.1 to 70 μm, we find a near-neutral global dust net DRE (−0.057 W m −2 ), weaker than most previous estimates. Large dust (diameter >10 μm) contributes 30% of the global longwave dust optical depth, providing observational constraints on large-particle abundance, and offsets 20% of the dust shortwave cooling over major source regions. Incorporation of EMIT mineralogy reduces shortwave uncertainty by more than 50%. The remaining uncertainty mainly exists in processes controlling dust abundance, particularly the poorly understood transport of large dust, and longwave optical properties, which require additional observational constraints to more accurately quantify the dust DRE.

Li, Longlei [Cornell Univ., Ithaca, NY (United Sta↗

DOE OSTI2020

Ring Morphology with Dust Coagulation in Protoplanetary Disks

Tidal interactions between the embedded planets and their surrounding protoplanetary disks are often postulated to produce the observed complex dust substructures, including rings, gaps, and asymmetries. In this Letter, we explore the consequences of dust coagulation on the dust dynamics and ring morphology. Coagulation of dust grains leads to dust size growth that, under typical disk conditions, produces faster radial drifts, potentially threatening the dust ring formation. Utilizing 2D hydrodynamical simulations of protoplanetary disks that include a full treatment of dust coagulation, we find that if the planet does not open a gap quickly enough, the formation of an inner ring is impeded due to dust coagulation and subsequent radial drift. Furthermore, we find that a "buildup" of submillimeter-sized grains often appears in the dust emission at the outer edge of the dust disk.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Planet-induced Vortices with Dust Coagulation in Protoplanetary Disks

In this work, we study how the dust coagulation/fragmentation will influence the evolution and observational appearances of vortices induced by a massive planet embedded in a low-viscosity disk by performing global 2D high-resolution hydrodynamical simulations. Within the vortex, due to its higher gas surface density and steeper pressure gradients, dust coagulation, fragmentation, and drift (to the vortex center) are all quite efficient, producing dust particles ranging from 1 μm to ~1.0 cm, as well as an overall high dust-to-gas ratio (above unity). In addition, the dust size distribution is quite nonuniform inside the vortex, with the mass-weighted average dust size at the vortex center (~4.0 mm) being a factor of ~10 larger than other vortex regions. Both large (~millimeter) and small (tens of microns) particles contribute strongly to affect the gas motion within the vortex. As such, we find that the inclusion of dust coagulation has a significant impact on the vortex lifetime and the typical vortex lifetime is about 1000 orbits. Furthermore, after the initial gaseous vortex is destroyed, the dust spreads into a ring with a few remaining smaller gaseous vortices with a high dust concentration and a large maximum size (~millimeter). At late time, the synthetic dust continuum images for the coagulation case show as a ring inlaid with several hot spots at the 1.33 mm band, while only distinct hot spots remain at 7.0 mm.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Effects of Dust Coagulation on Streaming Instability

Abstract Streaming instability (SI) in dust has long been thought to be a promising process in triggering planetesimal formation in the protoplanetary disks (PPDs). In this study, we present the first numerical investigation that models the SI in the vertically stratified disk together with the dust coagulation process. Our simulations reveal that, even with the initially small dust sizes, because dust coagulation promotes dust size growth, SI can eventually still be triggered. Specifically, dust coagulation, limited only by dust fragmentation, broadens the parameter boundaries obtained from previous SI studies using single dust species. We describe the various stages of dust dynamics along with their size evolution and explore the impact of different dust fragmentation velocities. Implications of these results for realistic PPDs are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1979

Thermal infrared properties of the Martian atmosphere. III - Local dust clouds

Prior to and during the Martian global dust storms in 1977, local dust clouds were identified from thermal observations. Local dust clouds appear up to 40 K cooler than the surrounding region in the daytime and appear warm at night. In contrast to their well-developed and consistent thermal signatures, local dust clouds exhibited little albedo contrast. Multiple observations of the same areas show that local dust clouds form and dissipate in a few days or less, and clouds were observed to move with velocities of from 14 to at least 32 m/sec. Local dust clouds are common along the receding edge of the south polar cap (observed primarily for orbiter imaging) and in the restricted area -10 deg to -30 deg, 80 deg to 125 deg W (observed primarily by the infrared thermal mapper); several of the latter occurred over a ridge in Claritas Fossae, indicating strong topographic control. In their active growing stage, local dust clouds are probably about 8 km high and have relatively abrupt tops. The accumulation of dust from local clouds reached similar levels immediately prior to both global storms, supporting the hypothesis that such dust accumulations are responsible for triggering the global dust storms.

Peterfreund, A. R.↗

NASA NTRS1979

Effects of dust on the heating of Mars' surface and atmosphere

An analysis performed to determine the effect dust particles suspended in Mars' atmosphere have on the radiation reaching the surface both directly and scattered by the dust is described. Additionally, the fraction of incident sunlight directly absorbed by the atmospheric dust is computed. These calculations are done for ranges of dust opacity, incidence angle, surface albedo, and dust albedo, representative of the conditions on Mars. The effect of atmospheric dust on the Bond albedo is discussed. It is shown that direct heating of the atmosphere by dust absorption of solar radiation is adequate to explain Mars' south polar spring temperature inversion. Under most circumstances the presence of dust in Mars' atmosphere produces a lowering of the average surface temperature; this is probably the cause of the anomalously slow south polar cap retreat of 1977. Explicit forms for both the surface heating and the atmospheric heating as a function of the dust opacity, incidence angle, surface albedo and dust albedo are given.

Davies, D. W.↗

NASA NTRS1984

Long range transport of fine grained sediments on Mars: Atmospheric dust loading, as inferred from Viking Lander imaging data

During the first Viking year, two global dust storms occurred and they contributed about 90% of the dust suspended in the Martian atmosphere on a global average, over the course of this year. The remainder was due to the cumulative effect of local dust storms. When globally distributed, the amount of suspended dust introduced into the atmosphere this Martian year was about 5x10(-3) g/sq cm. This mass loading was derived from the incremental optical depths measured over this year and estimates of the mean size of the dust particles (2.5 microns). During the second Martian year, global dust storms were far more muted than during the first year. No near perihelion dust storm occurred, and a somewhat weaker dust storm may have occurred near the start of the spring season in the Southern Hemisphere, at about the same time that the first global dust storm of the first year occurred. Thus, the dust loading derived for the first Martian year may be somewhat higher than the average over many Martian years, a conclusion that appears to be supported by preliminary studies of Martian years beyond the second Viking year on Mars.

Pollack, J. B.↗

NASA NTRS1983

Numerical models for cometary dust environments

The development of a numerical model for the dust environment near a comet is described. The major components of the model are a simple treatment of the acceleration of the dust by the gas outflow from an isothermal icy nucleus, a detailed treatment of the dust particle trajectories controlled by solar gravity and radiation pressure, including the formation of the dust envelope and tail, and a simple treatment of the radiation from the dust in the visible and thermal infrared. The results of recent comet observations are used to estimate parameter values for the model, including dust-to-gas ratios by light and by mass, the distribution of dust and gas emission on the nuclear surface, the distributions of dust particle size, density, mass, and radiative properties, and other quantities. Gas and dust production rates as functions of time are derived from observed light curves using the simple photometric theory. Sample results are presented for the dust concentration, flux and fluence along the trajectory of a spacecraft which flies by Comet P/Halley in 1986.

Divine, N.↗

NASA NTRS1986

Interplanetary dust: The interstellar connection

Although not proven, there is the widespread belief that comets consist, at least in part, of interstellar material that was originally present in the solar nebula. Furthermore, there are strong arguments in favor of the view that much of the interplanetary dust complex is derived from comets. The main arguments supporting this view are based on mass balance, analysis of the orbital parameters of meteors, and the long known association between meteor showers and specific comets. Laboratory measurements on interplanetary dust particles (IDPs) collected in the stratosphere have confirmed the view that many of the dust particles are primitive in the sense that they show striking enrichments of D/H relative to average solar system materials. It has also been demonstrated that the mid-infrared absorption spectra of one infrared red class of particles show strong similarities to IR sources such as the protostar W-33A. However, the laboratory studies of IDPs have shown that they represent a diverse set of objects and the measurement of the orbital parameters of specific dust particles is essential to answering the question of sources. The observation of the IRAS dust bands reopens the question of the role of asteroids in supplying a significant fraction of the dust and part of the diversity observed may be due to the fact that some of the dust is asteroidal and some cometary. In addition, some fraction of interplanetary dust must consist of an interstellar component intercepted by the solar system in its motion through the local interstellar medium. It has been shown that dust derived from nearby stars will have 75% of their orbits with eccentricities or equal to 1.1 and might be difficult to distinguish from interplanetary dust based on orbital measurements alone.

Carey, W. C.↗

NASA NTRS1986

Time-dependent numerical modeling of dust halo formation at comets

The evolution of gas and dust distributions following a spatially and temporally localized comet outburst was calculated using a hybrid kinetic-hydrodynamic method. In the inner coma the time-dependent continuity, momentum, and energy equations of the dusty gas flow were solved simultaneously using 12 dust sizes. Beyond 300 km a three-dimensional kinetic model was used to calculate the trajectory of each individual dust grain. It was found that following the onset of the comet outburst a gas-dust blast wave propagates outward in the inner coma. About 15 minutes after the increased gas and dust production was initiated at the nucleus, a new equilibrium was reached in the inner coma. The most important feature of this new steady state was the significant increase of the dust terminal velocities. These higher terminal velocity values resulted in larger apex distances for dust particles emitted during the outburst. The dust particles spend a relatively long time near their apex points; therefore, the outburst generates long-lasting distinct dust envelopes in front of the regular dust coma.

Gombosi, T. I.↗