Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Evaluation of a novel mid-infrared pyrometer for dynamic material experiments

Temperature is a complicated thermodynamic parameter to measure in dynamic compression experiments. Optical pyrometry is a general-purpose “work-horse” technique for measuring temperature from a radiant surface on these experimental platforms. The optical pyrometry channels are commonly held to the visible or Near-Infrared spectrum, which provides high fidelity temperature measurement for shock temperature above ∼1200–1500 K. However, low temperature (T < 1200 K) dynamic material experiments, including low pressure or quasi-isentropic studies, as well as experiments with complex thermodynamic paths, require Mid-Infrared (Mid-IR) for high fidelity measurements. This article outlines the design, testing, and characterization of a novel Mid-IR pyrometer system that can be configured between 2.5 and 5.0 µm, suitable for lower temperature measurements and for increasing the fidelity and precision of higher temperature measurements. Experimental validation was done on two separate gas gun platforms, with two separate impact velocities, achieving temperatures between 450 and 1100 K.

Dutra, E. C. (ORCID:0000000167649195)↗

DPD Parameters Estimation for Simultaneously Simulating Water–Oil Interfaces and Aqueous Nonionic Surfactants

The outcome of a coarse-grained simulation within the dissipative particle dynamics framework strongly depends on the choice of the repulsive parameter between different species. Different methodologies have been used in the literature to determine these parameters toward reproducing selected experimental system properties. In this work, a systematic investigation on possible procedures for estimating the simulation parameters is conducted. We compare methods based on the Hildebrand and the Hansen solubility parameter theories, mapped into the Flory–Huggins model. We find that using the Hansen solubility parameters it is possible to achieve a high degree of coarse graining, with parameters that yield realistic values for the interfacial tension. The procedure was first applied to the water/benzene system and then validated for water/n-octane, water/1,1-dichloroethane, water/methyl cyclohexane, and water/isobutyl acetate. In all these cases, the experimental interfacial tension could be reproduced by adjusting a single correction factor. In the case of the water–benzene system, the dissipative particle dynamics parameters derived using our approach were able to simultaneously describe both the interfacial tension and micellar properties of aqueous nonionic surfactants representative of the octyl poly(ethylene oxide) C8H17O(C2H4O)mH family. We show how the parameters can be used, within the dissipative particle dynamics framework, to simulate the water/oil interface in the presence of surfactants at varying concentrations. The results show, as expected, that as the surfactant concentration increases, the interfacial tension decreases, and micelles form in bulk water.

Chemistry↗

Deep learning of dynamically responsive chemical Hamiltonians with semiempirical quantum mechanics

Conventional machine-learning (ML) models in computational chemistry learn to directly predict molecular properties using quantum chemistry only for reference data. While these heuristic ML methods show quantum-level accuracy with speeds several orders of magnitude faster than traditional quantum chemistry methods, they suffer from poor extensibility and transferability; i.e., their accuracy degrades on large or new chemical systems. Incorporating quantum chemistry frameworks into the ML models directly solves this problem. Here we take the structure of semiempirical quantum mechanics (SEQM) methods to construct dynamically responsive Hamiltonians. SEQM methods use empirical parameters fitted to experimental properties to construct reduced-order Hamiltonians, facilitating much faster calculations than ab initio methods but with compromised accuracy. By replacing these static parameters with machine-learned dynamic values inferred from the local environment, we greatly improve the accuracy of the SEQM methods. Trained on molecular energies and atomic forces, these dynamically generated Hamiltonian parameters show a strong correlation with atomic hybridization and bonding. Trained with only about 60,000 small organic molecular conformers, the resulting model retains interpretability, extensibility, and transferability when testing on much larger chemical systems and predicting various molecular properties. Overall, this work demonstrates the virtues of incorporating physics-based descriptions with ML to develop models that are simultaneously accurate, transferable, and interpretable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduced order model based on principal component analysis for process simulation and optimization

It is well-known that distributed parameter computational fluid dynamics (CFD) models provide more accurate results than conventional, lumped-parameter unit operation models used in process simulation. Consequently, the use of CFD models in process/equipment co-simulation offers the potential to optimize overall plant performance with respect to complex thermal and fluid flow phenomena. Because solving CFD models is time-consuming compared to the overall process simulation, we consider the development of fast reduced order models (ROMs) based on CFD results to closely approximate the high-fidelity equipment models in the co-simulation. By considering process equipment items with complicated geometries and detailed thermodynamic property models, this study proposes a strategy to develop ROMs based on principal component analysis (PCA). Taking advantage of commercial process simulation and CFD software (for example, Aspen Plus and FLUENT), we are able to develop systematic CFD-based ROMs for equipment models in an efficient manner. In particular, we show that the validity of the ROM is more robust within well-sampled input domain and the CPU time is significantly reduced. Typically, it takes at most several CPU seconds to evaluate the ROM compared to several CPU hours or more to solve the CFD model. Two case studies, involving two power plant equipment examples, are described and demonstrate the benefits of using our proposed ROM methodology for process simulation and optimization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cosmic string collision in cosmological backgrounds

The collisions of cosmic string loops and the dynamics of junction formations in expanding backgrounds are studied. The key parameter controlling the dynamics of junction formation, the cosmic strings zipping and unzipping, is the relative size of the loops compared to the Hubble radius at the time of collision. We study analytically and numerically these processes for large superhorizon size loops, for small subhorizon size loops as well as for loops with the radii comparable to the Hubble radius at the time of collision.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced PDV waveform search and analysis method using parallel circular-convolution / cross-correlation for improved dynamic surface velocity extraction [Poster]

Previous work on exhaustive search methodologies for extracting best-match parameters pertaining to dynamic surface quantities from PDV was done by cross-correlating synthetically generated PDV waveforms with observed counterparts using the circular-convolution theorem. This work was further developed into an open-source PDV analysis toolkit called CCPDVANALYSIS which expands upon and enhances the previously tested methods by parallelizing serial algorithmic components and incorporating a comprehensive script library for different flavors of instantaneous frequency functions utilized in generating synthetic PDV waveforms. Results of these enhancements have been shown to markedly decrease execution times of exhaustive search and extraction algorithms and produce improved velocity recoveries for low-velocity and dynamically varying velocity signals. The CCPDVANALYSIS script library demonstrates an advanced method for extracting velocities from low-velocity and non-constant velocity signals further extending and improving the methods beyond capabilities of traditional frequency domain tools.

97 MATHEMATICS AND COMPUTING↗

A Differentiable Hydrology Approach for Modeling With Time-Varying Parameters

In the analysis of observational data with mathematical models, it is often desirable to let one or more model parameters vary with time to account for changing environmental conditions or to offer more flexibility. A standard approach for dynamic models is to allow for the number of parameters to grow as a function of time, leading to a high-dimensional inference problem for long data records. We propose using Hamiltonian Monte Carlo, a gradient-based Markov chain Monte Carlo (MCMC) method, to perform Bayesian inference for time-varying parameters (TVP) in hydrology models. As derivatives of model error functions with regard to parameters are not available in closed form, we implemented the GR4J rainfall-runoff models in Theano/PyMC3, and Jax/NumPyro, allowing for the application of automatic differentiation techniques. A simulation experiment assessing the viability of these methods for recovering underlying temporal variation in parameters indicates that a discrete Gaussian random walk-based prior appears to be best suited across a range of scenarios while the continuous-time Gaussian process compares relatively poorly. In an analysis of 20 years of daily real-world streamflow records from the Model Parameter Estimation Experiment (MOPEX) hydrology data set with increasing data sparsity and at multiple temporal resolutions, we find that TVP inference with gradient-based MCMC is a flexible and reliable approach for analyzing hydrology models with dynamic parameter sets.

54 ENVIRONMENTAL SCIENCES↗

Effect of parameter variations on the static and dynamic behaviour of a self-assembled quantum-dot laser using circuit-level modelling

We report a new circuit model for a self-assembled quantum-dot (SAQD) laser made of InGaAs/GaAs structures. The model is based on the excited state and standard rate equations, improves the previously suggested circuit models and also provides and investigates the performance of this kind of laser. The carrier dynamic effects on static and dynamic characteristics of a SAQD laser are analysed. The phonon bottleneck problem is simulated. Quantum-dot lasers are shown to be quite sensitive to the crystal quality outside and inside quantum dots. The effects of QD coverage factor, inhomogeneous broadening, the physical source of which is the size fluctuation of quantum dots formed by self-assembly of atoms, and cavity length on the SAQD laser characteristics are analysed. The results of simulation show that an increase in the cavity length and in the QD coverage factor results in the growth of the output power. On the other hand, an increase in the coverage factor and a degradation of inhomogeneous broadening lead to an increase in the modulation bandwidth. The effect of the QD height (cylindrical shape) and stripe width of the laser cavity on QD laser modulation is also analysed. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weakly nonlinear dynamics and the σ{sub 8} parameter

The amplitude of cosmological density fluctuations, σ{sub 8}, has been studied and estimated by analysing many cosmological observations. The values of the estimates vary considerably between the various probes. However, different estimators probe the value of σ{sub 8} in different cosmological scales and do not take into account the nonlinear evolution of the parameter at late times. We show that estimates of the amplitude of cosmological density fluctuations derived from cosmic flows are systematically higher than those inferred at early epochs from the CMB because of nonlinear evolution at later times. We discuss the past and future evolution of linear and nonlinear perturbations, derive corrections to the value of σ{sub 8} and compare amplitudes after accounting for these differences.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamic Characterization and Performance Evaluation of a 10-kw Power Take-Off with Mechanical Motion Rectifier for Wave Energy Conversion

The power take-off (PTO) is a key component for wave energy converters (WECs). The dynamic properties of the PTO influence the response of the WEC and should be considered when designing the WEC and not oversimplified. In addition, the efficiency as well as the reliability can play an important role on whether the PTO can be suitable for real-world applications. In this paper, a novel compact PTO rated at 10 kW is designed and prototyped, and a comprehensive nonlinear dynamic model is established for the PTO. Through bench testing, the unknown parameters of the dynamic model are characterized and determined. Further verification shows that the model can predict the dynamic performance of the PTO well. In addition, the test results show that the mechanical motion rectifier PTO can achieve good energy transfer efficiency, especially for low-load and low-speed conditions.

bench test↗

Early stage growth of amorphous thin film: Average kinetics, nanoscale dynamics, and pressure dependence

We used the coherent grazing incidence small angle x-ray scattering technique to study the average kinetics and nanoscale dynamics during early-stage a-WSi 2 sputter deposition. The kinetic and dynamic properties are examined as a function of pressure, which is known to be a critical factor in determining final surface roughness. Surface growth kinetics and dynamics are characterized by time parameters extracted from the height-height structure factor and correlation functions. The roughness at a given length scale reaches a maximum before relaxing down to a steady state. The lateral length scale dependence and pressure dependence are then compared among the measured kinetics and dynamics time parameters. Surfaces grown at lower pressures are smoother, leading to longer correlation times. The time parameters to reach a dynamic steady state and a kinetic steady state show contrasting pressure dependence. A dynamic steady state is reached earlier than the kinetic steady state at high pressure. A more random deposition direction and lower kinetic energy at higher pressures can explain these phenomena, along with the hypothesis that larger nanoclusters form in vapor before arriving at the surface. Here, a continuum model is applied to simulate the overall behavior with mixed success.

36 MATERIALS SCIENCE↗

DYNAMICAL STUDY OF A1689 FROM WIDE-FIELD VLT/VIMOS SPECTROSCOPY: MASS PROFILE, CONCENTRATION PARAMETER, AND VELOCITY ANISOTROPY

We examine the dynamics structure of the rich cluster A1689, combining VLT/VIMOS spectroscopy with Subaru/Suprime-Cam imaging. The radial velocity distribution of {approx}500 cluster members is bounded by a pair of clearly defined velocity caustics, with a maximum amplitude of {approx}|4000| km s{sup -1} at {approx_equal} 300 h {sup -1} kpc, beyond which the amplitude steadily declines, approaching zero velocity at a limiting radius of {approx}2 h {sup -1} Mpc. We derive the three-dimensional velocity anisotropy and galaxy number density profiles using a model-independent method to solve the Jeans equation, simultaneously incorporating the observed velocity dispersion profile, the galaxy counts from deep Subaru imaging, and our previously derived cluster mass profile from a joint lensing and X-ray analysis. The velocity anisotropy is found to be predominantly radial at large radius, becoming increasingly tangential towards the center, in accord with expectations. We also analyze the galaxy data independently of our previous analysis using two different methods: The first is based on a solution of the Jeans equation assuming an Navarro-Frenk-White (NFW) form for the mass distribution, whereas in the second method the caustic amplitude is used to determine the escape velocity. The cluster virial mass derived by both of these dynamical methods is in good agreement with results from our earlier lensing and X-ray analysis. We also confirm the high NFW concentration parameter, with results from both methods combined to yield c {sub vir} > 13 (1{sigma}). The inferred virial radius is consistent with the limiting radius where the caustics approach zero velocity and where the counts of cluster members drop off, suggesting that infall onto A1689 is currently not significant.

79 ASTRONOMY AND ASTROPHYSICS↗

Real-Space Local Dynamics of Molten Inorganic Salts Using Van Hove Correlation Function

Molten inorganic salts are attracting resurgent attention because of their unique physicochemical properties, making them promising media for next-generation concentrating solar power systems and molten salt reactors. The dynamics of these highly disordered ionic media is largely studied by theoretical simulations, while the robust experimental techniques capable of observing local dynamics are not well-developed. To provide fundamental insights into the atomic-scale transport properties of molten salts, we report the real-space dynamics of molten magnesium chloride at high temperatures employing the Van Hove correlation function obtained by inelastic neutron scattering. Overall, our results directly depict the distance-dependent dynamics of a molten salt on the picosecond time scale. This study demonstrates the capability of the developed approach to describe the locally correlated- and self-dynamics in molten salts, significantly improving our understanding of the interplay between microscopic structural parameters and their dynamics that ultimately control physical properties of condensed matter in extreme environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-state on-off intermittency caused by unstable dimension variability in periodically forced drift waves

Certain high-dimensional dynamical systems present two or more attractors characterized by different energy branches. For some parameter values the dynamics oscillates between these two branches in a seemingly random fashion, a phenomenon called two-state on-off intermittency. In this work we show that the dynamical mechanism underlying this intermittency involves the severe breakdown of hyperbolicity of the attractors through a mechanism known as unstable dimension variability. We characterize the parametric evolution of this variability using statistical properties of the finite-time Lyapunov exponents. As a model system that exhibits this behavior we consider periodically forced and damped drift waves. In this spatiotemporal example there is a low-dimensional chaotic attractor that is created by an interior crisis, already presenting unstable dimension variability.

97 MATHEMATICS AND COMPUTING↗

Systematic characterization of degas-driven flow for poly(dimethylsiloxane) microfluidic devices

Degas-driven flow is a novel phenomenon used to propel fluids in poly(dimethylsiloxane) (PDMS)-based microfluidic devices without requiring any external power. This method takes advantage of the inherently high porosity and air solubility of PDMS by removing air molecules from the bulk PDMS before initiating the flow. The dynamics of degas-driven flow are dependent on the channel and device geometries and are highly sensitive to temporal parameters. These dependencies have not been fully characterized, hindering broad use of degas-driven flow as a microfluidic pumping mechanism. Here, we characterize, for the first time, the effect of various parameters on the dynamics of degas-driven flow, including channel geometry, PDMS thickness, PDMS exposure area, vacuum degassing time, and idle time at atmospheric pressure before loading. We investigate the effect of these parameters on flow velocity as well as channel fill time for the degas-driven flow process. Using our devices, we achieved reproducible flow with a standard deviation of less than 8% for flow velocity, as well as maximum flow rates of up to 3 nL/s and mean flow rates of approximately 1-1.5 nL/s. Parameters such as channel surface area and PDMS chip exposure area were found to have negligible impact on degas-driven flow dynamics, whereas channel cross-sectional area, degas time, PDMS thickness, and idle time were found to have a larger impact. In addition, we develop a physical model that can predict mean flow velocities within 6% of experimental values and can be used as a tool for future design of PDMS-based microfluidic devices that utilize degas-driven flow.

42 ENGINEERING↗