Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROSTATIC CHARGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Exploiting Fixed Charge to Control Schottky Barrier Height in Si|Al 2 O 3 |MoO x – based Tunnel Diodes

The insertion of a tunneling atomic layer deposited (ALD) Al 2 O 3 film between MoO x and p-type Si has been studied to investigate Schottky barrier height tunability with varied negative fixed charge density. This work seeks to increase the hole-selectivity of MoO x -based contacts through manipulation of interface fixed charge. Fixed charge density and interface trap state densities are determined as a function of alumina processing conditions in metal-oxide-semiconductor capacitors (MOSCAPs). Schottky barrier heights were determined from Mott-Schottky analysis of tunnel diodes. An alumina deposition temperature of 80°C and post-deposition annealing at 425°C yielded the highest magnitude of negative fixed charge density (-3.5 × 10 12 q . cm –2 ). High deposition temperature and/or post-deposition annealing produced the lowest interface trap state density (1 × 10 12 eV -1 . cm –2 ). On p-type silicon, Schottky barrier height minimization was not clearly correlated with increasing fixed charge density. However, on n-type silicon, a significant increase in Schottky barrier height was evident (~0.8 eV to > 1 eV) and is attributed to the large negative fixed charge. Here, the findings from this work indicate that Schottky barrier height in carrier selective contacts can be tuned by electrostatic engineering of the SiO x |Al 2 O 3 interface.

aluminum oxide↗
DOE OSTI2020

Au 3 -to-Ag 3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(m-Pz-(i-C 3 H7) 2 )] 3 ∙[Ag(m-Tz-(n-C 3 F 7 ) 2 )] 3 (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1st crystallographically-verified M 3 @M' 3 stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M' (Au / Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol -1 between the two trimer moieties – a large value for intermolecular interactions between adjacent d 10 centres (nearly doubling the value for a recently claimed Au(I) / Cu(I) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol -1 with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked M 3 @M' 3 product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M' frontier molecular orbitals in such polar-covalent M–M' bonds in this family of molecules. The Au / Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H 3 N: → Ag in [Ag(NH 3 ) 2 ] + , as demonstrated herein quantitatively. Solidstate and molecular modeling illustrate electron flow from the p-basic gold trimer to the p-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL'CT) and metal-to-ligand (MLCT) charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measurement of the conduction band spin-orbit splitting in $\mathrm{WSe_2}$ and $\mathrm{WS_2}$ monolayers

We have investigated charge tunable devices based on $\mathrm{WSe_2}$ and $\mathrm{WS_2}$monolayers encapsulated in hexagonal boron nitride. In addition to the well-known radiative recombination of neutral and charged excitons, stationary photoluminescence measurements highlight a weaker-intensity optical transition that appears when the monolayer is electrostatically doped with electrons. We have carried out a detailed characterization of this photoluminescence line based on its doping dependence, its variation as a function of the optical excitation power, its polarization characteristics, and its g factor measured under longitudinal magnetic field. We interpret this luminescence peak as an impurity-assisted radiative recombination of the intervalley negatively charged exciton (triplet trion). In addition to the standard direct recombination, the triplet trion has a second recombination channel triggered by elastic scattering off the short-range impurity potential. The energy difference between the emitted photons from these two possible recombination processes of the same triplet trion is simply the single-particle conduction band spin-orbit splitting Δ c . We measure Δ c = 12 ± 0.5 meV for the $\mathrm{WSe_2}$ monolayer and Δ c = 12 ± 1 meV for the $\mathrm{WS_2}$ monolayer. Here, these results demonstrate the importance of second-order exciton recombination processes in transition-metal dichalcogenide structures.

2-dimensional systems↗
DOE OSTI2024

HTO and selenate diffusion through compacted Na-, Na–Ca-, and Ca-montmorillonite

Radionuclide transport in smectite clay barrier systems used for nuclear waste disposal is controlled by diffusion, with adsorption significantly retarding transport rates. While a relatively minor component of spent nuclear fuel, 79 Se is a major driver of the safety case for spent fuel disposal due to its long half-life (3.3×10 5 yr) and its low adsorption to clay (K D < 10 L/kg), thus a thorough understanding of Se diffusion through clay is critical for understanding the long-term safety of spent fuel disposal systems. Through-diffusion experiments with tritiated water (HTO, conservative tracer) and Se(VI) were conducted with a well-characterized, purified montmorillonite source clay (SWy-2) under a constant ionic strength (0.1 M) and three different electrolyte compositions: Na + , Ca 2+ , and a Na + -Ca 2+ mixture at pH 6.5 in order to probe the effects of electrolyte composition and interlayer cation composition on clay microstructure, Se(VI) aqueous speciation, and ultimately diffusion. Further, the results were modeled using a reactive transport modeling approach to determine values of porosity (ε), D e (effective diffusion coefficient), and K D (distribution coefficient for adsorption). HTO diffusive flux was higher in Ca-montmorillonite (D e =1.68×10 -10 m 2 s -1 ) compared to Na-montmorillonite (De=7.83×10 -11 m 2 s -1 ). This increase in flux is likely due to a greater degree of clay layer stacking in the presence of Ca 2+ compared to Na + , which leads to larger inter-particle pores. Overall, the Se(VI) flux was much lower than the HTO flux due to anion exclusion, with Se(VI) flux following the order Ca (D e = 1.03×10 -11 m 2 s -1 ) > Na–Ca (D e = 2.12×10 -12 m 2 s -1 ) > Na (D e = 1.28×10 -12 m 2 s -1 ). These differences in Se(VI) flux are due to a combination of factors, including (1) larger accessible porosity in Ca-montmorillonite due to clay layer stacking and smaller electrostatic effects compared to Na-montmorillonite, (2) larger accessible porosity for neutral-charge CaSeO4 species which makes up 32% of aqueous Se(VI) in the pure Ca system, and (3) possibly higher Se(VI) adsorption for Ca-montmorillonite. Through a combination of experimental and modeling work, this study highlights the compounding effects that electrolyte and counterion compositions can have on radionuclide transport through clay. Diffusion models that neglect these effects are not transferable from laboratory experimental conditions to in situ repository conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Selective cobalt and nickel electrodeposition for lithium-ion battery recycling through integrated electrolyte and interface control

Abstract Molecularly-selective metal separations are key to sustainable recycling of Li-ion battery electrodes. However, metals with close reduction potentials present a fundamental challenge for selective electrodeposition, especially for critical elements such as cobalt and nickel. Here, we demonstrate the synergistic combination of electrolyte control and interfacial design to achieve molecular selectivity for cobalt and nickel during potential-dependent electrodeposition. Concentrated chloride allows for the speciation control via distinct formation of anionic cobalt chloride complex (CoCl 4 2- ), while maintaining nickel in the cationic form ([Ni(H 2 O) 5 Cl] + ). Furthermore, functionalizing electrodes with a positively charged polyelectrolyte (i.e., poly(diallyldimethylammonium) chloride) changes the mobility of CoCl 4 2- by electrostatic stabilization, which tunes cobalt selectivity depending on the polyelectrolyte loading. This strategy is applied for the multicomponent metal recovery from commercially-sourced lithium nickel manganese cobalt oxide electrodes. We report a final purity of 96.4 ± 3.1% and 94.1 ± 2.3% for cobalt and nickel, respectively. Based on a technoeconomic analysis, we identify the limiting costs arising from the background electrolyte, and provide a promising outlook of selective electrodeposition as an efficient separation approach for battery recycling.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing nanomechanical deformation at the interface and degradation in all-thin-film inorganic electrochromic devices

Recently, progress in electrochromic (EC) devices has been made in optimizing electrode and device configurations and performance. However, the ion insertion/de-insertion induced charge transfer (CT) nanomechanical effect has remained unexplored, i.e., repetitive electrode size changes at the nanoscale and stress/strain generated during electrochemical cycling, which is the focus of this work due to its intimate correlation with the elastic and plastic deformation at the interface. Considering the intervalence electrons, excellent electrochemical kinetics, and dramatic color changes, tungsten oxide (WO 3 ) and nickel oxide (NiO) films are configured as the EC cathode and anode materials, respectively, within a full device. Upon extended cycles (>10 000), the void generation and delamination that occurred at the interface account for performance decay. Encouraged by the findings, nanoindentation mechanical tests and electrical kelvin probe force microscopy were employed to investigate the CT induced effects at the interface. There is a dramatic increase of up to 45% in the elastic Young's modulus in colored/charged WO 3 at ~40 mC cm -2 . Here, the correlation between CT and synergistic mechanical effect is interpreted by the Lippman equation. Interestingly, despite the charged state (colored; lithiated) with a relatively flat morphology bringing an ~3.4 times higher electrostatic surface potential, the electrical work function unexpectedly decreases, arising from the dominant effect of the dipole layer potential over the chemical potential. The interatomic cohesive energy and equilibrium distance increase bury the seeds for mechanical deformation in the long run. This work provides fundamental insights into electro-chemo mechanics and interdisciplinary concerted interfacial effects at the nano/atomic level. The dependence of surface potential, stress, work function, and cohesive energy on electrochemical kinetics has been interpreted.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements

Particle charging in the afterglows of non-thermal plasmas typically take place in a non-neutral space charge environment. We model the same by incorporating particle-ion collision rate constant models, developed in prior work by analyzing particle-ion trajectories calculated using Langevin Dynamics simulations, into species transport equations for ions, electrons and charged particles in the afterglow. A scaling analysis of particle charging and additional Langevin Dynamics calculations of the particle-ion collision rate constant are presented to extend the range of applicability to ion electrostatic to thermal energy ratios of 300 and diffusive Knudsen number (that scales inversely with gas pressure) up to 2000. The developed collision rate constant models are first validated by comparing predictions of particle charge against measured values in a stationary, non-thermal DC plasma from past PK-4 campaigns published in Phys. Rev. Lett. 93(8): 085001 and Phys. Rev. E 72(1): 016406). The comparisons reveal excellent agreement within ±35% for particles of radius 0.6,1.0,1.3 μm in the gas pressure range of ~20-150 Pa. The experiments to probe particle charge distributions by Sharma et al. (J. Physics D: Appl. Phys. 53(24): 245204) are modeled using the validated particle-ion collision rate constant models and the calculated charge fractions are compared with measurements. The comparisons reveal that the ion/electron concentration and gas temperature in the afterglow critically influence the particle charge and the predictions are generally in qualitative agreement with the measurements. Along with critical assessment of the modeling assumptions, several recommendations are presented for future experimental design to probe charging in afterglows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Studies of laser stimulated photodetachment from nanoparticles for particle charge measurements

Determining nanoparticle charge is more challenging than that for microparticles due to change in the particle size during the synthesis substantial plasma property variations, and difficulties in visualizing individual particles, rendering conventional microparticle charge diagnostics ineffective in dusty plasma. In this work, we utilized laser-stimulated photodetachment (LSPD) to deduce the mean charge of nanoparticles. Nanoparticles were grown in an Ar/C 2 H 2 mixture using a capacitively coupled RF discharge and the LSPD induced changes in the electron current monitored by a cylindrical Langmuir probe. LSPD signals were obtained and analyzed across different dust growth phases. The prolonged decay of electron current pulses was attributed to the presence of residual negative ions, caused by the effective electrostatic trapping of these ions and the potential post—LSPD re-formation of new ones. The particle charge was estimated by combining the laser-stimulated photodetachment signal from the probe with the dust density obtained from laser-light extinction using the measured nanoparticle size distribution. For a nanoparticles size range of approximately 100–250 nm and mean diameter of $d$ p ∼154.37 nm, the effective mean charge was estimated to be $\langle$$Q$$\rangle$ d $≈$ 37 elementary charge units. The measured charge values are lower than those predicted by orbital motion limited theory, which may be attributed to significant electron depletion in the nanodusty plasma. LSPD results in Ar/C 2 H 2 nano-dusty plasma confirm the applicability of this method for estimating individual nanoparticle charges. However, it has also been demonstrated that electron detachment from residual background negative ions can influence the detachment current decay and must be carefully considered.

dust particle charge↗
DOE OSTI2020

An explicit scheme to enforce charge conservation in transient Particle-in-Cell simulations with Maxwell-Boltzmann electrons

The Maxwell-Boltzmann electron model is a very popular approximation of the electronic behavior in electrostatic plasmas, adopted in all cases where the electron dynamics is governed only by a balance between electric and pressure forces. In such a model, the electron dynamics is reduced to solving for a nonlinear Poisson problem together with an additional expression enforcing charge conservation. In this work we derive an expression of charge conservation which can be conveniently applied to explicit schemes to update the reference Boltzmann density, particularly useful when simulating plasma sheaths. The scheme can be equally applied to both steady-state and transient problems. Two examples are shown, a steady-state plasma sheath, and a radio-frequency magnetic presheath. Our proposed scheme allows to enforce global charge conservation locally in time, and can thus be applied to the simulation of transient phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Single-Molecule Detection of the Encounter and Productive Electron Transfer Complexes of a Photosynthetic Reaction Center

Small, diffusible redox proteins play an essential role in electron transfer (ET) in respiration and photosynthesis, sustaining life on Earth by shuttling electrons between membrane-bound complexes via finely tuned and reversible interactions. Ensemble kinetic studies show transient ET complexes form in two distinct stages: an “encounter” complex largely mediated by electrostatic interactions, which subsequently, through subtle reorganization of the binding interface, forms a “productive” ET complex stabilized by additional hydrophobic interactions around the redox-active cofactors. Here, using single-molecule force spectroscopy (SMFS) we dissected the transient ET complexes formed between the photosynthetic reaction center-light harvesting complex 1 (RC-LH1) of Rhodobacter sphaeroides and its native electron donor cytochrome c 2 (cyt c 2 ). Importantly, SMFS resolves the distribution of interaction forces into low (~150 pN) and high (~330 pN) components, with the former more susceptible to salt concentration and to alteration of key charged residues on the RC. Thus, the low force component is suggested to reflect the contribution of electrostatic interactions in forming the initial encounter complex, whereas the high force component reflects the additional stabilization provided by hydrophobic interactions to the productive ET complex. Employing molecular dynamics simulations, we resolve five intermediate states that comprise the encounter, productive ET and leaving complexes, predicting a weak interaction between cyt c 2 and the LH1 ring near the RC-L subunit that could lie along the exit path for oxidized cyt c 2 . The multimodal nature of the interactions of ET complexes captured here may have wider implications for ET in all domains of life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymer Coatings on Virus-like Particle Nanoreactors at Low Ionic Strength—Charge Reversal and Substrate Access

Virus-like particles (VLPs) are a class of biomaterials which serve as platforms for achieving the desired functionality through interior and exterior modifications. Through ionic strength-mediated electrostatic interactions, VLPs have been assembled into hierarchically ordered materials. This work builds on predictive models to prepare polymer-coated VLP dusters at very low ionic strength. Zeta potential measurements showed that the clusters carried a strongly positive charge, a complete charge reversal from the VLP building block. SAXS analysis confirmed polymer adsorption onto the VLP exterior. Furthermore, we then studied the activity of an encapsulated enzyme toward small molecular and macromolecular substrates to determine the effect of each component of the hierarchically assembled material. We found that while encapsulation and polymer coating did not have a large effect on access to the enzyme by its native, small molecular substrate, substrate modification with a macromolecule caused the polymer coating and encapsulation to affect the access to the enzyme.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Charge Separation at Organic Interfaces with Near-Zero Energy Offset: A Step toward Designing Inorganic-like Organic Semiconductors

For organic semiconductors, it is often presumed that an energy level offset at the donor–acceptor (D-A) interface is required to provide the driving force for charge separation (CS). This energy level offset unavoidably leads to a voltage loss in organic photovoltaics. In this work, by using zinc phthalocyanine (ZnPc) and fluorinated zinc phthalocyanine (F 4 ZnPc) as a model D/A interface, we found that spontaneous CS, with an enthalpy increase of ∼0.3–0.4 eV, can occur even with an interfacial energy offset as small as ∼0.1 eV. This enthalpy-increase CS process is driven by entropy. The entropic driving force can be enhanced by two factors: (1) a point-like spatial contact between the delocalized electron and hole wave function in the charge transfer exciton; (2) a small band bending near the interface originating from long-range electrostatic interaction. Our work demonstrates that effective CS can occur at interfaces with a near-zero energy level offset, which means that the energy loss at the D/A interface can be avoided.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reinterpreting π-stacking

The nature of π–π interactions has long been debated. The term “π-stacking” is considered by some to be a misnomer, in part because overlapping π-electron densities are thought to incur steric repulsion, and the physical origins of the widely-encountered “slip-stacked” motif have variously been attributed to either sterics or electrostatics, in competition with dispersion. Here, we use quantum-mechanical energy decomposition analysis to investigate π–π interactions in supramolecular complexes of polycyclic aromatic hydrocarbons, ranging in size up to realistic models of graphene, and for comparison we perform the same analysis on stacked complexes of polycyclic saturated hydrocarbons, which are cyclohexane-based analogues of graphane. Our results help to explain the short-range structure of liquid hydrocarbons that is inferred from neutron scattering, trends in melting-point data, the interlayer separation of graphene sheets, and finally band gaps and observation of molecular plasmons in graphene nanoribbons. Analysis of intermolecular forces demonstrates that aromatic π–π interactions constitute a unique and fundamentally quantum-mechanical form of non-bonded interaction. Not only do stacked π–π architectures enhance dispersion, but quadrupolar electrostatic interactions that may be repulsive at long range are rendered attractive at the intermolecular distances that characterize π-stacking, as a result of charge penetration effects. The planar geometries of aromatic sp 2 carbon networks lead to attractive interactions that are “served up on a molecular pizza peel”, and adoption of slip-stacked geometries minimizes steric (rather than electrostatic) repulsion. The slip-stacked motif therefore emerges not as a defect induced by electrostatic repulsion but rather as a natural outcome of a conformational landscape that is dominated by van der Waals interactions (dispersion plus Pauli repulsion), and is therefore fundamentally quantum-mechanical in its origins. This reinterpretation of the forces responsible for π-stacking has important implications for the manner in which non-bonded interactions are modeled using classical force fields, and for rationalizing the prevalence of the slip-stacked π–π motif in protein crystal structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

PigmentHunter: A point-and-click application for automated chlorophyll-protein simulations

Chlorophyll proteins (CPs) are the workhorses of biological photosynthesis, working together to absorb solar energy, transfer it to chemically active reaction centers, and control the charge-separation process that drives its storage as chemical energy. Yet predicting CP optical and electronic properties remains a serious challenge, driven by the computational difficulty of treating large, electronically coupled molecular pigments embedded in a dynamically structured protein environment. To address this challenge, we introduce here an analysis tool called PigmentHunter, which automates the process of preparing CP structures for molecular dynamics (MD), running short MD simulations on the nanoHUB.org science gateway, and then using electrostatic and steric analysis routines to predict optical absorption, fluorescence, and circular dichroism spectra within a Frenkel exciton model. Inter-pigment couplings are evaluated using point-dipole or transition-charge coupling models, while site energies can be estimated using both electrostatic and ring-deformation approaches. The package is built in a Jupyter Notebook environment, with a point-and-click interface that can be used either to manually prepare individual structures or to batch-process many structures at once. Here, we illustrate PigmentHunter’s capabilities with example simulations on spectral line shapes in the light harvesting 2 complex, site energies in the Fenna–Matthews–Olson protein, and ring deformation in photosystems I and II.

14 SOLAR ENERGY↗
DOE OSTI2022

Performance evaluation of an industrial ceramic nanofiltration unit for wastewater treatment in oil production

An industrial ceramic nanofiltration membrane (pore size 0.9 nm) was tested in a Canadian oil field for more than 12,500 h to treat wastewater directly from daily operations, without any type of pre-treatment. This wastewater contained a high content of total suspended solids (13 to 510 mg/kg), and total organic carbon (31 to 134 mg/kg). The membrane unit was operated at different transmembrane pressure (TMP) set points (4–16 bar) and recovery set points (40–80%). The data show that ion and compound rejection depend strongly on a combination of both TMP and recovery, with the largest rejection occurring at low recovery values and high TMP values. Two mechanisms were responsible for rejection: sieving, which mostly impacted compound rejection, and electrostatic phenomena that impacted ion rejection. It is shown that ion rejection depends linearly on charge density of the ion. Ion rejection was measured as high as 85% and compounds (such as TSS) were rejected as high as 100%. The specific flux varied between 1–10 L/(m 2 .h.bar). Results from this field testing indicate the possibility of using these types of ceramic membranes for oil field wastewater treatment.

42 ENGINEERING↗
DOE OSTI2023

Binding of carboxylate and water to monovalent cations

The interactions of carboxylate anions with water and cations are important for a wide variety of systems, both biological and synthetic. Here, in order to gain insight on properties of the local complexes, we apply density functional theory, to treat the complex electrostatic interactions, and investigate mixtures with varied numbers of carboxylate anions (acetate) and waters binding to monovalent cations, Li + , Na + and K + . The optimal structure with overall lowest free energy contains two acetates and two waters such that the cation is four-fold coordinated, similar to structures found earlier for pure water or pure carboxylate ligands. More generally, the complexes with two acetates have the lowest free energy. In transitioning from the overall optimal state, exchanging an acetate for water has a lower free energy barrier than exchanging water for an acetate. In most cases, the carboxylates are monodentate and in the first solvation shell. As water is added to the system, hydrogen bonding between waters and carboxylate O atoms further stabilizes monodentate structures. These structures, which have strong electrostatic interactions that involve hydrogen bonds of varying strength, are significantly polarized, with ChelpG partial charges that vary substantially as the bonding geometry varies. Overall, these results emphasize the increasing importance of water as a component of binding sites as the number of ligands increases, thus affecting the preferential solvation of specific metal ions and clarifying Hofmeister effects. Finally, structural analysis correlated with free energy analysis supports the idea that binding to more than the preferred number of carboxylates under architectural constraints are a key to ion transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nonlinear Poisson–Boltzmann solutions for charged parallel plates: When opposite charges repel

I present an exact solution of the Poisson–Boltzmann equation for two parallel plates and discuss the solution properties. I discuss in more detail plates with opposite charges: In this case, there are two critical separations, L c,1 < L c,2 . For separations less than L c,1 , the force between plates is repulsive. It switches to attractive at L c,1 , but with the electric potential having the same sign on both plates. For L > L c,2 , the force remains attractive, and the potential at the plates has the same sign as the charge on each plate. I also describe charge regulation, determined by pK a , and provide formulas for both the critical distance where oppositely charged plates repel and their charging process. Finally, the implications of these results for the nanoparticle assembly, as driven by electrostatic interactions, are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Resonantly Enhanced Electromigration Forces for Adsorbates on Graphene

We investigate the electromigration forces for weakly bonded adsorbates on graphene by using density-functional based calculations. We find that the nature of electromigration forces on an adsorbate critically depends on the energy level alignment between the adsorbate state and the Fermi level of the graphene. For a resonant adsorbate, whose frontier orbitals lie close to the Fermi level, the electromigration force is dominated by the electron wind force that is strongly enhanced along the electron flow direction, irrespective of the sign of the adsorbate charge. For a nonresonant adsorbate, the electromigration force is essentially the direct force that depends on the adsorbate charge. We also show that the magnitude of electromigration forces can be continuously tunable through electrostatic gating for resonant adsorbates. Our results provide new insight for understanding and controlling how nanoscale objects behave in or on host materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗