Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effective thermal conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Extension of similarity test procedures to cooled engine components with insulating ceramic coatings

Material thermal conductivity was analyzed for its effect on the thermal performance of air cooled gas turbine components, both with and without a ceramic thermal-barrier material, tested at reduced temperatures and pressures. The analysis shows that neglecting the material thermal conductivity can contribute significant errors when metal-wall-temperature test data taken on a turbine vane are extrapolated to engine conditions. This error in metal temperature for an uncoated vane is of opposite sign from that for a ceramic-coated vane. A correction technique is developed for both ceramic-coated and uncoated components.

Gladden, H. J.↗
NASA NTRS2011

Heat Transfer Measurement and Modeling in Rigid High-Temperature Reusable Surface Insulation Tiles

Heat transfer in rigid reusable surface insulations was investigated. Steady-state thermal conductivity measurements in a vacuum were used to determine the combined contribution of radiation and solid conduction components of heat transfer. Thermal conductivity measurements at higher pressures were then used to estimate the effective insulation characteristic length for gas conduction modeling. The thermal conductivity of the insulation can then be estimated at any temperature and pressure in any gaseous media. The methodology was validated by comparing estimated thermal conductivities with published data on a rigid high-temperature silica reusable surface insulation tile. The methodology was also applied to the alumina enhanced thermal barrier tiles. Thermal contact resistance for thermal conductivity measurements on rigid tiles was also investigated. A technique was developed to effectively eliminate thermal contact resistance on the rigid tile s cold-side surface for the thermal conductivity measurements.

Daryabeigi, Kamran↗
NASA NTRS1972

Measurement of apparent thermal conductivity of multilayer insulations at low compressive loads.

A description is presented of the test calorimeter, the experimental technique, and the results obtained in an evaluation of four multilayer insulations selected for application on future multilaunch space vehicles utilizing liquid hydrogen and oxygen for orbital operations. Particular attention is paid to techniques for minimizing error in obtaining thermal conductivity data. The effective conductivity for four high-performance insulations was determined at a minimum of four compressive loads in the range from 0.0001 to 0.1 psi. Results show that the thermal conductivity of multilayer insulations is insensitive to small changes in mechanical loading at 1 torr interstitial gas pressure, but becomes increasingly more sensitive to mechanical loading as the interstitial gas pressure is reduced.

Holmes, V. L.↗
DOE OSTI2022

Optimization of Thermal Conductance at Interfaces Using Machine Learning Algorithms

We report optimization of thermal transport across the interface of two different materials is critical to micro-/nanoscale electronic, photonic, and phononic devices. Although several examples of compositional intermixing at the interfaces having a positive effect on interfacial thermal conductance (ITC) have been reported, an optimum arrangement has not yet been determined because of the large number of potential atomic configurations and the significant computational cost of evaluation. On the other hand, computation-driven materials design efforts are rising in popularity and importance. Yet, the scalability and transferability of machine learning models remain as challenges in creating a complete pipeline for the simulation and analysis of large molecular systems. In this work we present a scalable Bayesian optimization framework, which leverages dynamic spawning of jobs through the Message Passing Interface (MPI) to run multiple parallel molecular dynamics simulations within a parent MPI job to optimize heat transfer at the silicon and aluminum (Si/Al) interface. We found a maximum of 50% increase in the ITC when introducing a two-layer intermixed region that consists of a higher percentage of Si. Because of the random nature of the intermixing, the magnitude of increase in the ITC varies. We observed that both homogeneity/heterogeneity of the intermixing and the intrinsic stochastic nature of molecular dynamics simulations account for the variance in ITC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2013

Comparing Transition-Edge Sensor Response Times in a Modified Contact Scheme with Different Support Beams

We present measurements of the thermal conductance, G, and effective time constants, tau, of three transition-edge sensors (TESs) populated in arrays operated from 80-87mK with T(sub C) approximately 120mK. Our TES arrays include several variations of thermal architecture enabling determination of the architecture that demonstrates the minimum noise equivalent power (NEP), the lowest tau and the trade-offs among designs. The three TESs we report here have identical Mo/Cu bilayer thermistors and wiring structures, while the thermal architectures are: 1) a TES with straight support beams of 1mm length, 2) a TES with meander support beams of total length 2mm and with 2 phononfilter blocks per beam, and 3) a TES with meander support beams of total length 2mm and with 6 phonon-filter blocks per beam. Our wiring scheme aims to lower the thermistor normal state resistance R(sub N) and increase the sharpness of the transition alpha=dlogR/dlogT at the transition temperature T(sub C). We find an upper limit of given by (25+/-10), and G values of 200fW/K for 1), 15fW/K for 2), and 10fW/K for 3). The value of alpha can be improved by slightly increasing the length of our thermistors.

SAFARI instrument↗
DOE OSTI2025

A rigorous framework for an improved Messinger/Myers model of ice accretion under conditions of variable property and unsteady aircraft icing

We analyse the Messinger/Myers model by critically evaluating simplifying assumptions through a rigorous formulation of the rime ice accretion process. We explore the effects of both constant and variable ice density and thermal conductivity, along with the effects of sublimation from the ice surface. The effects of key factors such as droplet impact rate, ambient temperature relative to the freezing temperature and the temperature difference between the ambient air and the airfoil surface are examined. Under these varying conditions, the present rigorous formulation is used to assess the significance of unsteady effects, variable ice properties and sublimation. We observe that the Myers model performs remarkably well in certain icing situations and analyse the reasons for this strong performance. We also show that partially relaxing the model’s assumptions can lead to poorer performance. The Myers model can lead to overprediction of ice surface temperature and correspondingly underprediction of transition time under conditions of relatively weak sublimation and surface cooling. A modified Myers model is presented, which can be used to recover near-perfect results under widely varying icing conditions of relevance. This article is part of the theme issue ‘Heat and mass transfer in frost and ice’.

Science & Technology - Other Topics↗
NASA NTRS1994

Effects of ply thickness on thermal cycle induced damage and thermal strain

An experimental study was conducted to determine the effects of ply thickness in composite laminates on thermally induced cracking and changes in the coefficient of thermal expansion, CTE. A graphite-epoxy composite material, P75/ERL 1962, in thin (1 mil) and thick (5 mils) prepregs was used to make cross-ply laminates, ((0/90)(sub n))s, with equal total thickness (n=2, n=10) and cross-ply laminates with the same total number of plies (n=2). Specimens of each laminate configuration were cycled up to 1500 times between -250 and 250 F. Thermally induced microdamage was assessed as a function of the number of cycles as was the change in CTE. The results showed that laminates fabricated with thin-plies microcracked at significantly different rates and reached significantly different equilibrium crack densities than the laminate fabricated with thick-ply and n=2. The CTE of thin-ply laminates was less affected by thermal cycling and damage than the CTE of thick-ply laminates. These differences are attributed primarily to differences in interply constraints. Observed effects of ply thickness on crack density was qualitatively predicted by a combined shear-lag stress/energy method.

Tompkins, Stephen S.↗
DOE OSTI2023

Effect of Strain on the Resistivity and Thermal Conductivity of High Purity Niobium

High purity niobium (Nb) is a technologically important material for large-scale accelerator and nano-scale quantum computing applications in microwave frequency range. The high thermal conductivity and low resistivity of Nb are critical to the high performance at temperature range of 0.01–4.0 K. The presence of interstitials such as O, N, H, and C act as scattering centers and alter the mean free path, reducing resistivity and thermal conductivity, and contributing significantly to Nb's thermal performance for temperatures of 2.0 K and above. The residual resistivity ratio (RRR), defined as the ratio of the normal state resistivity at 300 K to that at 4.2 K (Nb, T c = 9.2 K), is an accepted direct estimate of the impurity content of fully recrystallized Nb. Complete re-crystallization of Nb is challenging unless very high temperatures are employed, which is often impractical, hence, in practice, dislocation and dislocation structures impact the thermal performance of Nb due to strong phonon scattering contributions. Furthermore, this paper reports on the degradation of thermal conductivity and RRR of high purity Nb large grain, single crystal with fixed impurity, varying strain, and dislocation content levels. Experimental thermal conductivity data fits the Boltzmann transport equation incorporating dislocation density.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhancement of Thermal Conductivity of Bentonite Buffer Materials with Copper Wires/Meshes for High-Level Radioactive Waste Disposal

In high-level radioactive waste disposal, a heat-generating waste canister is generally encased with a layer of bentonite-based buffer material acting as an engineered barrier to limit water percolation and radionuclide release. The low thermal conductivity of bentonite (~0.5 W/m∙K) combined with a high thermal loading waste package may result in a high surface temperature on the package that can potentially impact the structural integrity of the package itself as well as the surrounding buffer material. We show in this paper that the thermal conductivity of bentonite can be effectively enhanced by embedding copper wires/meshes across the buffer layer to form fully connected high heat conduction pathways. A simple calculation based on Rayleigh’s model shows that a required thermal conductivity of 5 W/m∙K for effective heat dissipation can be achieved simply by adding ~1 vol % of copper wires/meshes into bentonite. As a result, the peak surface temperature on a large waste package such as a dual-purpose canister can be reduced by up to 300°C, leading to a significant reduction in the surface storage time for waste cooling and therefore the overall cost for direct disposal of such waste packages. Because of the ensured full thermal percolation across the buffer layer, copper wires/meshes turn out to be much more effective than any other materials currently suggested (such as graphene or graphite) in enhancing the thermal conductivity of buffer material. Furthermore, the embedded copper wires/meshes can help reinforce the mechanical strength of the buffer material, thus preventing the material from a potential erosion by a possible intrusion of dilute groundwater.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal conductivity of 3D-printed block-copolymer-inspired structures

This study primarily focuses on examining the impact that geometric structure has on thermal conductivity of multi-phase constructs in different 3D-printed poly(lactic acid), PLA, samples. The investigated structures are inspired by morphologies formed by diblock copolymers: lamellae, hexagonally packed cylinders, and gyroid. This research also investigates how volume percentage and material combination influence the thermal conductivity of these structures. Further, the samples can be tailored to simulate various thermal management structures observed in practical applications, such as thermal interface materials in electronic devices. Thermal conductivity ratio is controlled using air, the least conductive material at 0.026 W/(m K), PLA at 0.136 W/(m K), and thermal paste at 5.11 W/(m K). Different models were tested against thermal conductivity measurements in order to capture the effect of material type (PLA-Air versus PLA-Thermal Paste), volume percentage, structure, and orientation. Simple, effective medium models were good predictions of thermal conductivity in lamellar structures, but it was necessary to develop models for conduction through cylindrical and gyroid structures. Finally, all results were normalized to find a universal model that is independent of structure and material. This approach provides a simple method to predict how to reduce or enhance transport properties and heat management capabilities of 3D printed objects.

36 MATERIALS SCIENCE↗
NASA NTRS1947

Cooling of Gas Turbines: Effectiveness of Rim Cooling of Blades - 2

An analysis is presented of rim cooling of gas-turbine blades; that is, reducing the temperature at the base of the blade (wheel rim), which cools the blade by conduction alone. Formulas for temperature and stress distributions along the blade are derived and, by the use of experimental stress-rupture data for a typical blade alloy, a relation is established between blade life (time for rupture), operating speed, and amount of rim cooling for several gas temperatures. The effect of blade parameter combining the effects of blade dimensions, blade thermal conductivity, and heat-transfer coefficient is determined. The effect of radiation on the results is approximated. The gas temperatures ranged from 1300F to 1900F and the rim temperature, from 0F to 1000F below the gas temperature. This report is concerned only with blades of uniform cross section, but the conclusions drawn are generally applicable to most modern turbine blades. For a typical rim-cooled blade, gas temperature increases are limited to about 200F for 500F of cooling of the blade base below gas temperature, and additional cooling brings progressively smaller increases. In order to obtain large increases in thermal conductivity or very large decreases in heat-transfer coefficient or blade length or necessary. The increases in gas temperature allowable with rim cooling are particularly small for turbines of large dimensions and high specific mass flows. For a given effective gas temperature, substantial increases in blade life, however, are possible with relatively small amounts of rim cooling.

Wolfenstein, Lincoln↗
NASA NTRS1990

The role of condensation and heat conduction in the formation of prominences - An MHD simulation

The effects of condensation and thermal conduction on the formation of Kippenhahn-Schlueter (K-S) type prominences in quiet regions (QP) due to symmetric mass injection are investigated. To implement this investigation a self-consistent, two-dimensional, nonplanar, time-dependent MHD simulation model is developed. In the model, various values of the injection velocity, density, and magnetic field strength are used to determine the most favorable conditions for the QP formation. Based on these simulation results, it is found that the formation of a K-S type field configuration should be considered as a dynamic process which needs both condensation amd mass injection to supply enough mass to maintain such a configuration to complete the quiescent prominence formation process.

Wu, S. T.↗
NASA NTRS2007

Thermal Testing and Analysis of an Efficient High-Temperature Multi-Screen Internal Insulation

Conventional multi-layer insulations exhibit excellent insulation performance but they are limited to the temperature range to which their components reflective foils and spacer materials are compatible. For high temperature applications, the internal multi-screen insulation IMI has been developed that utilizes unique ceramic material technology to produce reflective screens with high temperature stability. For analytical insulation sizing a parametric material model is developed that includes the main contributors for heat flow which are radiation and conduction. The adaptation of model-parameters based on effective steady-state thermal conductivity measurements performed at NASA Langley Research Center (LaRC) allows for extrapolation to arbitrary stack configurations and temperature ranges beyond the ones that were covered in the conductivity measurements. Experimental validation of the parametric material model was performed during the thermal qualification test of the X-38 Chin-panel, where test results and predictions showed a good agreement.

Weiland, Stefan↗
DOE OSTI2020

Dominant effect of anharmonicity on the equation of state and thermal conductivity of MgO under extreme conditions

Understanding heat transfer in the earth mantle region is of great scientific interest but highly challenging due to dissimilar conditions from our daily lives. Thermal conductivity of highly pressured and thermally activated materials can be completely different from that at ambient condition. In this study we calculate the equation of state and thermal conductivity of cubic crystalline MgO, a major component of the mantle, in such an environment. It is shown that the material properties are not accurately captured unless rigorous treatment of anharmonicity of phonon vibrational motion is explicitly applied. To predict renormalized phonon dispersion relations, interatomic force constants of high-order expansion are required, especially at elevated temperature. The anharmonicity plays an increasingly substantial role for regulating volume expansion as temperature rises, because the Gibbs free energy of MgO considerably deviates from what was predicted by the quasiharmonic approximation. We find that the lattice thermal conductivity of MgO and the heat transfer of the earth's mantle are reliably estimated only when both the temperature-dependent renormalization of phonon frequencies and four-phonon scattering effects are taken into consideration. We map the characteristics at Geotherm into contour diagrams in which equilibrium volumes and the thermal conductivities are described as functions of temperature and pressure. Furthermore, the thermal conductivity values of MgO in this study are smaller than those in previous theoretical studies due to the additional incorporation of four-phonon scatterings in the calculations. Specifically, deviation between the values in previous studies and in this study becomes larger as thermodynamic variables reach those near the core-mantle boundary. For instance, thermal conductivities of 52.15 and 23.67 Wm -1 K -1 are estimated at ambient and extreme conditions (T = 4000K and P = 135 GPa), respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anomalously Suppressed Thermal Conduction by Electron-Phonon Coupling in Charge-Density-Wave Tantalum Disulfide

Charge and thermal transport in a crystal is carried by free electrons and phonons (quantized lattice vibration), the two most fundamental quasiparticles. Above the Debye temperature of the crystal, phonon-mediated thermal conductivity ( κ L ) is typically limited by mutual scattering of phonons, which results in κ L decreasing with inverse temperature, whereas free electrons play a negligible role in κ L . Here, an unusual case in charge-density-wave tantalum disulfide (1T-TaS 2 ) is reported, in which κ L is limited instead by phonon scattering with free electrons, resulting in a temperature-independent κ L . In this system, the conventional phonon–phonon scattering is alleviated by its uniquely structured phonon dispersions, while unusually strong electron-phonon (e-ph) coupling arises from its Fermi surface strongly nested at wavevectors in which phonons exhibit Kohn anomalies. The unusual temperature dependence of thermal conduction is found as a consequence of these effects. The finding reveals new physics of thermal conduction, offers a unique platform to probe e-ph interactions, and provides potential ways to control heat flow in materials with free charge carriers. The temperature-independent thermal conductivity may also find thermal management application as a special thermal interface material between two systems when the heat conduction between them needs to be maintained at a constant level.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Temperatures and minimum thickness of the inactive surface layer of comet Halley

The effects of a nonvolatile mantle on the thermal state of a comet nucleus are investigated. The original computer model was modified so that temperatures can be computed through a thin dust mantle to the center of a 5 km spherical nucleus in the orbit of P/Halley. No attempt is made to simulate the formation of the mantle. Results are obtained for various specified values of initial mantle thickness and thermal conductivity to determine their effects on temperature profiles through the mantle. The minimum thickness of mantle that can withstand ejection by sublimating gasses is also calculated as a function of mantle thermal conductivity. Calculations were performed for ten or more orbits until temperatures in the mantle reached a near steady state. Results indicate that mantles as thin as 4 cm and 14 cm, for thermal conductivities of 600 and 6000 ergs/cm/s K, respectively, will remain intact. Surface temperatures as high as 511 K at perihelion and 400 K at the position of spacecraft encounter were computed at 0 degree latitude for an upright, rotating nucleus. Ice interface temperatures were raised by different amounts during each orbit, depending on mantle thickness and thermal conductivity, until steady state was reached. These results imply that relatively small nonvolatile masses emplaced randomly in comet nuclei could produce an irregular, permanently mantled surface and could also account for the apparently random location of active areas.

Fanale, F. P.↗