SEARCH · Search NASA

Results for “Elliptic problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Boundary-conforming mapping applied to computations of highly deformed solidification interfaces

A new boundary-conforming mapping is developed for the calculation of highly deformed cellular solidification interfaces in a model of directional solidification of a binary alloy. The mapping is derived through a variational formulation that is designed so that the grid penetrates the grooves between cells along the interface without causing a loss of ellipticity of the mapping equations. A finite element/Newton method is presented for simultaneous solution of the free boundary problem described by the solutal model of directional solidification and the mapping equations. Results are compared to previous calculations and demonstrate the importance of accurate representation of the interface shape for understanding the solution structure.

Tsiveriotis, K.↗

NASA NTRS1983

Spectral multigrid methods for elliptic equations 2

A detailed description of spectral multigrid methods is provided. This includes the interpolation and coarse-grid operators for both periodic and Dirichlet problems. The spectral methods for periodic problems use Fourier series and those for Dirichlet problems are based upon Chebyshev polynomials. An improved preconditioning for Dirichlet problems is given. Numerical examples and practical advice are included.

Zang, T. A.↗

NASA NTRS1984

Spectral multigrid methods for elliptic equations II

Zang, T. A.↗

NASA NTRS2007

Guidance Algorithms for Non-Drifting Trajectory Generation and Control in RendezVous Missions into Elliptical Orbits

Safety requirement represents one of the most critical aspect when defining the operational profile for a RendezVous mission. This requirement specially affects the design of the guidance algorithms that need to be tailored to guarantee what is normally referred to as Passive Trajectory Protection . The basic idea of passive trajectory protection is to design all the trajectory elements in an approach sequence such that if, at any point of the trajectory, thrust control ceases, the resulting free drift motion will remain collision free during a certain amount of time. This paper deals with the design and performances assessment of specific guidance algorithm addressing this issue. Firstly the problem is addressed for circular orbit using the Traveling Ellipse formulation for the relative motion. Secondly a solution for the RendezVous into a generic elliptical orbit is presented. This is based on a reduced transition matrix obtained through a description of the relative motion based on the first order variation of the orbital elements.

DiSotto, Emanuele↗

NASA NTRS1986

Line Spring Model and Its Applications to Part-Through Crack Problems in Plates and Shells

The line spring model is described and extended to cover the problem of interaction of multiple internal and surface cracks in plates and shells. The shape functions for various related crack geometries obtained from the plane strain solution and the results of some multiple crack problems are presented. The problems considered include coplanar surface cracks on the same or opposite sides of a plate, nonsymmetrically located coplanar internal elliptic cracks, and in a very limited way the surface and corner cracks in a plate of finite width and a surface crack in a cylindrical shell with fixed end.

Erdogan, F.↗

NASA NTRS1988

The use of multigrid techniques in the solution of the Elrod algorithm for a dynamically loaded journal bearing

A numerical solution to a theoretical model of vapor cavitation in a dynamically loaded journal bearing is developed, utilizing a multigrid iterative technique. The code is compared with a presently existing direct solution in terms of computational time and accuracy. The model is based on the Elrod algorithm, a control volume approach to the Reynolds equation which mimics the Jakobssen-Floberg and Olsson cavitation theory. Besides accounting for a moving cavitation boundary and conservation of mass at the boundary, it also conserves mass within the cavitated region via liquid striations. The mixed nature of the equations (elliptic in the full film zone and nonelliptic in the cavitated zone) coupled with the dynamic aspects of the problem create interesting difficulties for the present solution approach. Emphasis is placed on the methods found to eliminate solution instabilities. Excellent results are obtained for both accuracy and reduction of computational time.

Woods, Claudia M.↗

NASA NTRS1988

Line spring model and its applications to part-through crack problems in plates and shells

Erdogan, Fazil↗

NASA NTRS1993

A global multilevel atmospheric model using a vector semi-Lagrangian finite-difference scheme. I - Adiabatic formulation

An adiabatic global multilevel primitive equation model using a two time-level, semi-Lagrangian semi-implicit finite-difference integration scheme is presented. A Lorenz grid is used for vertical discretization and a C grid for the horizontal discretization. The momentum equation is discretized in vector form, thus avoiding problems near the poles. The 3D model equations are reduced by a linear transformation to a set of 2D elliptic equations, whose solution is found by means of an efficient direct solver. The model (with minimal physics) is integrated for 10 days starting from an initialized state derived from real data. A resolution of 16 levels in the vertical is used, with various horizontal resolutions. The model is found to be stable and efficient, and to give realistic output fields. Integrations with time steps of 10 min, 30 min, and 1 h are compared, and the differences are found to be acceptable.

Bates, J. R.↗

NASA NTRS2005

A Direct Method for Fuel Optimal Maneuvers of Distributed Spacecraft in Multiple Flight Regimes

We present a method to solve the impulsive minimum fuel maneuver problem for a distributed set of spacecraft. We develop the method assuming a non-linear dynamics model and parameterize the problem to allow the method to be applicable to multiple flight regimes including low-Earth orbits, highly-elliptic orbits (HEO), Lagrange point orbits, and interplanetary trajectories. Furthermore, the approach is not limited by the inter-spacecraft separation distances and is applicable to both small formations as well as large constellations. Semianalytical derivatives are derived for the changes in the total AV with respect to changes in the independent variables. We also apply a set of constraints to ensure that the fuel expenditure is equalized over the spacecraft in formation. We conclude with several examples and present optimal maneuver sequences for both a HE0 and libration point formation.

Hughes, Steven P.↗

NASA NTRS1985

Implicit/explicit analysis of interactive phenomena in: supersonic, chemically-reacting, mixing and boundary layer problems

An efficient implicit/explicit procedure for solving the parabolized Navier-Stokes (PNS) equations to analyze supersonic, viscous, chemically-reacting flows is presented. The approach combines a fully-implicit algorithm for solving the parabolic mixing/boundary layer equations with an explicit algorithm for determining the hyperbolic pressure field. The unified model, SPLITP, contains provisions for treating bounding/embedded subsonic regions using a pressure-splitting procedure which suppresses elliptic (upstream influence) effects without recourse to sublayer approximations. Several two-equation turbulence models with compressibility and curvature-correction terms are incorporated into SPLITP. Applications to a variety of flow problems are presented which include: ducted supersonic mixing and combustion flowfields, free jets and plumes, and, curved boundary layers and wall jets.

Dash, S. M.↗

NASA NTRS1995

Feasibility of Coupling Between a Single-Mode Elliptical-Core Fiber and a Single Mode Rib Waveguide Over Temperature

To determine the feasibility of coupling the output of an optical fiber to a rib waveguide in a temperature environment ranging from 20 C to 300 C, a theoretical calculation of the coupling efficiency between the two was investigated. This is a significant problem which needs to be addressed to determine whether an integrated optic device can function in a harsh temperature environment. Because the behavior of the integrated-optic device is polarization sensitive, a polarization-preserving optic fiber, via its elliptical core, was used to couple light with a known polarization into the device. To couple light energy efficiently from an optical fiber into a channel waveguide, the design of both components should provide for well-matched electric field profiles. The rib waveguide analyzed was the light input channel of an integrated-optic pressure sensor. Due to the complex geometry of the rib waveguide, there is no analytical solution to the wave equation for the guided modes. Approximation or numerical techniques must be utilized to determine the propagation constants and field patterns of the guide. In this study, three solution methods were used to determine the field profiles of both the fiber and guide: the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of a rib channel waveguide and elliptical fiber at two temperatures, 20 C and 300 C. These temperatures were chosen to represent a nominal and a high temperature that the device would experience. Using the electric field profile calculated from each method, the theoretical coupling efficiency between the single-mode optical fiber and rib waveguide was calculated using the overlap integral and results of the techniques compared. Initially, perfect alignment was assumed and the coupling efficiency calculated. Then, the coupling efficiency calculation was repeated for a range of transverse offsets at both temperatures. Results of the calculation indicate a high coupling efficiency can be achieved when the two components were properly aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.

Tuma, Margaret L.↗

NASA NTRS1990

The calculation of rotor/fuselage interaction for two-dimensional bodies

Unsteady rotor wake interactions with the empennage, tail boom, and other aerodynamic surfaces have a significant influence on the aerodynamic performance of the helicopter, ride quality, and vibration. A Computational Fluid Dynamic (CFD) method for computing the aerodynamic interaction between an interacting vortex wake and the viscous flow about arbitrary 2-D bodies was developed to address this helicopter problem. The vorticity and flow field velocities are calculated on a body-fitted computational mesh using an uncoupled iterative solution. The interacting vortex wake is represented by an array of discrete vortices which, in turn, are represented by a finite core model. The evolution of the interacting vortex wake is calculated by Lagrangian techniques. The flow around circular and elliptic cylinders in the absence of an interacting vortex wake was calculated. These results compare very well with other numerical results and with results obtained from experiment and thereby demonstrate the accuracy of the viscous solution. The interaction of a simulated rotor wake with the flow about 2-D bodies, representing cross sections of fuselage components, was calculated to address the vortex interaction problem. The vortex interaction was calculated for the flow about a circular and an elliptic cylinder at 45 and 90 degrees incidence. The results demonstrate the significant variation in lift and drag on the 2-D bodies during the vortex interaction.

Stremel, Paul M.↗

NASA NTRS1975

On the computation of two- and three-dimensional steady transonic flows by relaxation methods

The paper is concerned with the application of the Murman and Cole (1971) relaxation scheme to steady, inviscid transonic flow problems in two and three dimensions. This scheme, which automatically accounts for weak shock waves, uses separate difference operators in elliptic and hyperbolic regions. The details of the scheme are described in terms of the original small disturbance formulation of Murman and Cole. In particular, Murman's recent (1973) introduction of fully conservative difference operators to obtain the correct shock jumps is examined. The extension to treating the exact isentropic equation is then covered with special attention given to Jameson's (to appear) rotated difference scheme for supersonic flow regions. The bulk of the discussion is related to two-dimensional procedures, and some comparisons with experiment are made, with emphasis on the effects of viscosity and wind-tunnel walls. Application of the Murman-Cole scheme is then discussed for small disturbances in three dimensions.

Bailey, F. R.↗

NASA NTRS1985

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are useed to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗

NASA NTRS1985

Multigrid techniques for the solution of the passive scalar advection-diffusion equation

The solution of elliptic passive scalar advection-diffusion equations is required in the analysis of many turbulent flow and convective heat transfer problems. The accuracy of the solution may be affected by the presence of regions containing large gradients of the dependent variables. The multigrid concept of local grid refinement is a method for improving the accuracy of the calculations in these problems. In combination with the multilevel acceleration techniques, an accurate and efficient computational procedure is developed. In addition, a robust implementation of the QUICK finite-difference scheme is described. Calculations of a test problem are presented to quantitatively demonstrate the advantages of the multilevel-multigrid method.

Phillips, R. E.↗

NASA NTRS1986

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator-theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are used to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗

NASA NTRS1986

Reynolds stress closure in jet flows using wave models

A wave model was developed for the two dimensional shear layer. This configuration is being used as a test case for the closure schemes. Numerical methods are under development to solve the nonseparable Rayleigh equation. A model problem is being used to assist in the algorithm development. An analytic solution of the Rayleigh equation for a basic elliptic flow was obtained. This will be used to verify the stability codes developed for arbitrary geometries. Other numerical methods for solving the Rayleigh equation based on the boundary element technique are being examined.

Morris, P. J.↗

DOE OSTI2026

Integral Kernel Methods for Nonlinear Parabolic-Elliptic Systems

Nonlinear parabolic-elliptic systems arise in many physical, biological, and chemical phenomena such as chemotaxis, ion transport, self-gravitating particles, and Brownian vortices. Existing methods struggle with the strong coupling and high nonlinearity and nonlocality of some of these systems, especially the ill-conditioned, convection-dominated problems. To overcome numerical difficulties, current approaches rely on initial guesses, preconditioning, or iterative techniques with no convergence guarantees. They might suffer from poor scalability, large memory usage, and difficulty to parallelize. Inspired by the connection of parabolic-elliptic systems to stochastic processes, we introduce a novel meshless, monolithic, and fully explicit method that naturally encapsulates the elliptic and parabolic operators into a single step which updates each node deterministically with global information. By being fully quadrature-based, it avoids solving systems of discretized equations and does not utilize initial guesses or preconditioning, while requiring little memory and being easy to parallelize. We first derive the method in an integral kernel formulation with quadratic complexity in the number of integration nodes and then leverage kernel-independent fast multipole methods (FMM) to present a scalable algorithm with linear complexity. We provide numerical examples for the Poisson-Nernst-Planck equations in one, two, and three dimensions, together with the derivation of the integral kernel for each case. Furthermore, the examples demonstrate the fast convergence and scalability of the FMM-accelerated algorithm, as well as its suitability for convection-dominated problems, making it competitive against traditional PDE solvers.

PDE systems↗