Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUEL TANK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Optimal payload ascent trajectories of winged vehicles

A trajectory analysis is presented which shows the advantage of lifting ascent and the penalties associated with increased wing mass due to increases in aerodynamic loading. The vehicle analyzed is made up of an orbiter, an expendable liquid fuel tank, and two solid rocket motors. Results of the tradeoff are illustrated in a graph of the total vehicle mass plotted against the trajectory constraint. Results indicate that even when structural mass penalties are considered lifting ascent provides a payload delivery.

Martin, J. A.↗
NASA NTRS1976

Exospheric density measurements from the drag-free satellite Triad

The Triad satellite is maintained within 1 mm of its proof mass (a small metal ball) in a purely gravitational orbit, using a drag-free control system, named Discos, as the disturbance compensation system. The Discos proof mass is surrounded by an outer shell which holds fuel tanks and cold gas jets. The shell shields the proof mass from such nongravitational forces as radiation pressure, atmospheric drag, and micrometeorite impact. Whenever these forces displace the outer shell relative to the proof mass, an error signal is generated by a capacitive bridge sensor, and the satellite is propelled by gas jets to remain centered on the proof mass when the error reaches 1 mm. Local atmospheric densities near 800 km were measured, using ball position data, and the observed accelerations were corrected for the effects of solar radiation pressure. The measured densities reveal a greater dependence on latitude than that indicated by balloon satellites, and also a dependence on longitude. Only a small dependence on Kp, however, was observed in the region where the measurements were made.

Moe, K.↗
NASA NTRS1976

Air-bearing spin facility for measuring energy dissipation

The air-bearing spin facility was developed to determine experimentally the effect of energy dissipation upon the motion of spinning spacecraft. The facility consists of an air-bearing spin table, a telemetry system, a command system, and a ground control station. The air-bearing spin table was designed to operate in a vacuum chamber. Tests were run on spacecraft components such as fuel tanks, nutation dampers, reaction wheels, and active nutation damper systems. Each of these items affected the attitude of a spinning spacecraft. An experimental approach to determine these effects was required because the dissipation of these components could not be adequately analyzed. The results of these experiments have been used, with excellent results, to predict spacecraft motion.

Peterson, R. L.↗
NASA NTRS1977

Space Shuttle Program Progress Report

A status report is presented on progress in the design, manufacturing and testing of components of the space transportation system (STS), and primarily the Space Shuttle vehicles. Project landmarks from 1969 to 1981 are indicated, fabrication of the Shuttle Orbiter and rollout of the first prototype are described, fabrication and assembly of some Orbiter parts are sketched, and some of the subsystems (thermal protection, avionics, maneuvering aids, reaction control, remote manipulator) are described. Also discussed are: Orbiter carrier aircraft, Shuttle main engine and tests, external fuel tank, solid rocket booster, launch and landing facilities. A separate section is devoted to ground tests (vibration, propulsion, electronics, avionics integration), trainers and simulators, and flight tests (captive flight, free flight, landing and approach, orbital flight).

Thompson, R. F.↗
NASA NTRS1977

Mathematical and computational studies of the stability of axisymmetric annular capillary free surfaces

Of principal interest is the stability of a perfectly wetting liquid in an inverted, vertical, right circular-cylindrical container having a concave spheroidal bottom. The mathematical conditions that the contained liquid be in stable static equilibrium are derived, including those for the limiting case of zero contact angle. Based on these results, a computational investigation is carried out for a particular container that is used for the storage of liquid fuels in NASA Centaur space vehicles, for which the axial ratio of the container bottom is 0.724. It is found that for perfectly wetting liquids the qualitative nature of the onset of instability changes at a critical liquid volume, which for the Centaur fuel tank corresponds to a mean fill level of approximately 0.503 times the tank's radius. Small-amplitude periodic sloshing modes for this tank were calculated; oscillation frequencies or growth rates are given for several Bond numbers and liquid volumes, for normal modes having up to six angular nodes.

Albright, N.↗
NASA NTRS1980

Four-step reaction for polytriazine elastomers

Four step imidoylamidine reaction sequence is used to make crosslinked polyperfluoralkyltriazines with superior elastomeric properties, greater molecular weight, and crosslinking control. Polymers can find useful application in fuel tank sealants, o-ring, wire enamels, pneumatic ducts, and many other applications.

Rosser, R. W.↗
NASA NTRS1979

Near-field sonic-boom pressure signatures for the space shuttle launch and orbiter vehicles at Mach 6

Static-pressure signatures parallel to the flight path of the launch and entry configurations of the space shuttle were measured. The launch configurations, consisting of an equivalent body of revolution (representing the orbiter and external fuel tank) with a solid exhaust gas plume attached, was tested at an angle of attack of 0 deg. The entry configuration (orbiter only) was tested over an angle-of-attack range from 10 deg to 40 deg. Calculated pressure signatures were in good agreement with measured signatures for both configurations.

Ashby, G. C., Jr.↗
NASA NTRS1979

Hydrazine monopropellant reciprocating engine development

A hydrazine fueled piston engine for providing 11.2 kW was developed to satisfy the need for an efficient power supply in the range from 3.7 to 74.6 kW where existing nonair-breathing power supplies such as fuel cells or turbines are inappropriate. The engine was developed for an aircraft to fly to 21.3 km and above and cruise for extended periods. A remotely piloted aircraft and the associated flight control techniques for this application were designed. The engine is geared down internally (2:1) to accommodate a 1.8 m diameter propeller. An alternator is included to provide electrical power. The pusher-type engine is mounted onto the aft closure of the fuel tank, which also provides mounting for all other propulsion equipment. About 20 hrs of run time demonstrated good efficiency and adequate life. One flight test to 6.1 km was made using the engine with a small fixed-pitch four-bladed propeller. The test was successful in demonstrating operational characteristics and future potential.

Akkerman, J. W.↗
NASA NTRS1979

Research in structures and materials for future space transportation systems - An overview

The paper provides a review of some of the advances of the past decade in structures and materials that have application to future space transportation systems. The paper concentrates on metallic thermal protection systems and structures which could provide the structural efficiency, reliability, and durability dictated by future space utilization requirements. The need for completely reusable, on-board cryogenic fuel tanks is cited as the most challenging technical opportunity and potential thermostructural concepts for tanks are identified. Other critical areas needing technology advances are discussed. Finally, the unique research opportunities offered by the Shuttle Orbiter experiments program for testing structures and thermal protection systems are explored.

Kelly, H. N.↗
NASA NTRS1980

Passive wing/store flutter suppression

Passive flutter-suppression system has been developed to increase flutter speed of aircraft wings that are adversely affected by addition of large masses (stores) to the wings, such as external fuel tanks. Important features of system are its effectiveness for large variations in mass of store as well as unsensitivity of system to large change in location of store center-of-gravity.

Foughner, J. T., Jr.↗
NASA NTRS1980

Fuel system technology overview

Fuel system research and technology studies are being conducted to investigate the correlations and interactions of aircraft fuel system design and environment with applicable characteristics of the fuel. Topics include: (1) analysis of in-flight fuel temperatures; (2) fuel systems for high freezing point fuels; (3) experimental study of low temperature pumpability; (4) full scale fuel tank simulation; and (5) rapid freezing point measurement.

Friedman, R.↗
NASA NTRS1980

Complex configuration analysis at transonic speeds

Advanced performance requirements of new combat and transport aircraft together with design time constraints intensify the development and application of three dimensional computational analyses. A computational method which was developed for the specific purpose of providing an engineering analysis of complex aircraft configurations at transonic speeds. Particular attention is given to the recently incorporated wing viscous interaction and canard capabilities. The treatment of fuselage fairings, nacelles, and pylons is reviewed. The means for keeping computing resources at reasonable levels are identified. Three configurations were selected for correlations with experimental data. Taken together, the comparisons illustrate the full extent of current analysis capabilities. The configurations include: (1) a wing fuselage canard fighter; (2) a transport with fuselage fairings, four nacelles, four pylons; and (3) a space vehicle which includes an external fuel tank and rocket boosters (transonic launch configuration).

Boppe, C. W.↗
NASA NTRS1981

The 1,2,4-oxadiazole elastomers

Crosslinked 1,2,4-oxadiazole elastomers were prepared either by thermally condensing a monomer having the formula HwN(HON)C-R-Q, wherein Q is a triazine ring forming group such as nitrile or amidine, or by a mixture of said monomer with RC(NOH)NH22, with R in these formulas standing for a bivalent organic radical containing fluorine, hydrogen, or trifluoromethyl. In the monomer charge, the overall proportions of amidoxime groups to triazine ring forming groups varies depending on the extent of crosslinking desired in the final polymer. The heat and chemical resistant elastomers disclosed can serve, for instance, as adhesives, caulking compounds, channel sealants, fuel tank liners.

Rosser, R. W.↗
NASA NTRS1983

Structural response of transport airplanes in crash situations

This report highlights the results of contractural studies of transport accident data undertaken in a joint research program sponsored by the FAA and NASA. From these accident data studies it was concluded that the greatest potential for improved transport crashworthiness is in the reduction of fire related fatalities. Accident data pertaining to fuselage integrity, main landing gear collapse, fuel tank rupture, wing breaks, tearing of tank lower surfaces, and engine pod scrubbing are discussed. In those accidents where the energy absorbing protective capability of the fuselage structure is expended and the airplane experiences major structural damage, trauma caused fatalities are also discussed. The dynamic performance of current seat/restraint systems are examined but it is concluded that the accident data does not adequately define the relationship between occupant response and the dynamic interaction with the seat, floor and fuselage structure.

Thomson, R. G.↗
NASA NTRS1983

Apparatus for improving the fuel efficiency of a gas turbine engine

An energy recovery system is provided for an aircraft gas turbine engine of the type in which some of the pneumatic energy developed by the engine is made available to support systems such as an environmental control system. In one such energy recovery system, some of the pneumatic energy made available to but not utilized by the support system is utilized to heat the engine fuel immediately prior to the consumption of the fuel by the engine. Some of the recovered energy may also be utilized to heat the fuel in the fuel tanks. Provision is made for multiengine applications wherein energy recovered from one engine may be utilized by another one of the engines or systems associated therewith.

Coffinberry, G. A.↗
NASA NTRS1982

The Space Shuttle - Description, operation, and evolution

System specifications, launch procedures, costs, payloads, and evolutionary developments in the STS are outlined. The Shuttle employs solid propellant boosters and an external cryogenic fuel tank to achieve LEO for the manned Orbiter, which can maneuver in space and return to earth like a glider. The Shuttle can place a maximum payload of 30 tons into a 275 km orbit. An Inertial Upper Stage and a Spinning Solid Upper Stage will be carried by the Orbiter in its bay and used to boost satellites into GEO. Additionally, the Orbiter is equipped with a remote manipulator system for removing cargo from the bay and for grappling satellites for retrieval or repair. The Shuttle is presently launched from Kennedy Space Center, while a second launch site is being prepared at Vandenberg AFB. The STS is intended to perform 28-40 flights per year by the end of the 1980s. An Orbital Transfer Vehicle is under study to increase the size and length of payloads which can be placed in GEO using the Shuttle. Utilization of the concept is noted to be connected with the development of a permanently manned space station.

Bekey, I.↗
NASA NTRS1983

An experimental investigation of the impingement of a planar shock wave on an axisymmetric body at Mach 3

An experimental study of the flow caused by a planar shock wave impinging obliquely on a cylinder is presented. The complex three dimensional shock wave and boundary layer interaction occurring in practical problems, such as the shock wave impingement from the shuttle nose on an external fuel tank, and store carriage interference on a supersonic tactical aircraft were investigated. A data base for numerical computations of complex flows was also investigated. The experimental techniques included pressure measurements and oil flow patterns on the surface of the cylinder, and shadowgraphs and total and static pressure surveys on the leeward and windward planes of symmetry. The complete data is presented in tabular form. The results reveal a highly complex flow field with two separation zones, regions of high crossflow, and multiple reflected shocks and expansion fans.

Brosh, A.↗
NASA NTRS1984

Jet through a wall protrusion in a cross-flow

The flow interactions between a jet issuing out of a protrusion in a wall and a crosswise flow are of interest because of the manner in which the spreading and mixing of the jet are affected by the flow separation, formation of vortices and recirculation zones and the associated flow instabilities. In combustors and in aircraft void spaces adjoining fuel tanks such interactions determine flame stability and propagation characteristics. Results from flow visualization and from predictions based on a three-dimensional viscous flow code are utilized to show the effects of several flow and geometrical parameters on the processes occuring in the vicinity of the protrusion and the jet.

Hong, S. K.↗