Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fast Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-beta, and HY: experiments and kinetic modelling

In this study, the catalytic pyrolysis of low-density polyethylene (LDPE), polyethylene terephthalate (PET) and their mixture (1 : 1 wt/wt) with three zeolite catalysts (HZSM-5, H-beta, HY) was investigated using a thermogravimetric analyzer (TGA) and a Pyroprobe® micro-reactor coupled to a gas chromatograph mass spectrometer (Py-GC/MS). The TGA results demonstrated that during pyrolysis at 10 °C min –1 , on average, zeolite catalysts decreased the maximum decomposition temperature by 149 °C for LDPE while only decreasing by 8 °C for PET. The derivative thermogravimetric (DTG) curve evidenced interactions when the two polymers were catalytically co-pyrolyzed for all the three catalysts. A lumped nth order reaction scheme was able to accurately model both non-catalytic and catalytic pyrolysis and co-pyrolysis by using the least squares fitting approach for determining the kinetic parameters. The kinetic model was able to model well the interaction effects observed during catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-beta, and HY (Fit% Wt% > 96%, Fit% DTG > 94%). Py-GC/MS experiments for the catalytic fast pyrolysis of LDPE revealed that HZSM-5 resulted in the highest selectivity to aromatic hydrocarbons (31.6%) and HY resulted in the highest selectivity to gasoline range C 5 –C 10 paraffins and olefins (40.9%). Catalytic fast pyrolysis of PET showed high selectivity to benzene for all the catalysts (>43%) and that HZSM-5 resulted in the highest selectivity to polyaromatic hydrocarbons (24.7%). Finally, the catalytic fast co-pyrolysis of LDPE and PET revealed interaction effects for all the three catalysts evidenced by a positive synergy% for alkylated benzenes (3–142%) and polyaromatics (105–187%) with a concomitant negative synergy% for benzene (24–36%) and C 5 –C 10 paraffins and olefins (27–53%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparing Effects of Feedstock and Run Conditions on Pyrolysis Products Produced at Pilot-Scale

Fast pyrolysis is a promising pathway for mass production of liquid transportable biofuels. The Thermochemical Process Development Unit (TCPDU) pilot plant at NREL is conducting research to support the Bioenergy Technologies Office's 2017 goal of a $3 per gallon biofuel. In preparation for down select of feedstock and run conditions, four different feedstocks were run at three different run conditions. The products produced were characterized extensively. Hot pyrolysis vapors and light gasses were analyzed on a slip stream, and oil and char samples were characterized post run.

09 BIOMASS FUELS↗

Catalytic conversion of rubber wastes to produce aromatic hydrocarbons over USY zeolites: Effect of SiO 2 /Al 2 O 3 mole ratio

Catalytic conversion of rubber wastes to produce an alternative fuel resource is a promising approach to dispose of solid wastes and address environmental issues. In this study, catalytic fast pyrolysis (CFP) of rubber wastes over acidic zeolites was conducted, and the effect of SiO 2 /Al 2 O 3 mole ratio of USY zeolites on the formation of aromatic hydrocarbons was explored. Experimental results indicated that alkenes and aromatic hydrocarbons were the main pyrolytic products obtained from fast pyrolysis of rubber wastes, and the pyrolysis temperature played a vital role in the formation of aromatics with the highest concentration achieved at 750 °C. Furthermore, catalyst types also affected the catalytic degradation of rubber wastes since limonene was completely decomposed in the presence of zeolites. Compared to SAPO-34, zeolites with higher external surface area, stronger Brønsted acid sites, and larger pore size, including USY, HY, and Hβ, were more effective in the production of aromatic hydrocarbons with the highest content obtained from USY catalyzed run. Given the observed effect of SiO 2 /Al 2 O 3 mole ratio of USY zeolites on the formation of aromatic hydrocarbons during the CFP of rubber wastes, USY with low SiO 2 /Al 2 O 3 ratio of 5.3 was more beneficial to the generation of aromatic hydrocarbons, while that with higher SiO 2 /Al 2 O 3 mole ratio (11.5) facilitated the formation of alkenes. Simultaneously, the product distribution of aromatic hydrocarbons obtained from CFP of rubber wastes over USY zeolites was dominated by xylenes, alkylbenzenes, and toluene, and USY with SiO 2 /Al 2 O 3 mole ratio of 5.3 was more active in the production of toluene and xylenes.

30 DIRECT ENERGY CONVERSION↗

Furan production from glycoaldehyde over HZSM-5

Catalytic fast pyrolysis of biomass over zeolite catalysts results primarily in aromatic (e.g. benzene, toluene, xylene) and olefin products. However, furans are a higher value intermediate for their ability to be readily transformed into gasoline, diesel, and chemicals. Here we investigate possible mechanisms for the coupling of glycoaldehyde, a common product of cellulose pyrolysis, over HZSM-5 for the formation of furans. Experimental measurements of neat glycoaldehyde over a fixed bed of HZSM-5 confirm furans (e.g. furanone) are products of this reaction at temperatures below 300 degrees C with several aldol condensation products as co-products (e.g. benzoquinone). However, under typical catalytic fast pyrolysis conditions (>400 degrees C), further reactions occur that lead to the usual aromatic product slate. ONIOM calculations were utilized to identify the pathway for glycoaldehyde coupling toward furanone and hydroxyfuranone products with dehydration reactions serving as the rate determining steps with typical intrinsic reaction barriers of 40 kcal mol-1. The reaction mechanisms for glycoaldehyde will likely be similar to that of other small oxygenates such as acetaldehyde, lactaldehyde, and hydroxyacetone and this study provides a generalizable mechanism of oxygenate coupling and furan formation over zeolite catalysts.

09 BIOMASS FUELS↗

Air Pollutant Emissions and Regulatory Implications of a Biorefinery Co-Processing Bio-Oil in a Petroleum Refinery: Preprint

Pyrolysis oil, often referred to as bio-oil when derived from biomass through a fast pyrolysis process, has attracted considerable attention because of the high carbonaceous matter and high heating value compared to the original biomass. Pyrolysis oil provides a viable link between the agriculture/forestry and (petro-) chemical industry. Utilizing existing fossil fuel infrastructure by introducing bio-oil in petroleum refineries to produce renewable hydrocarbon fuels (i.e., repurposing existing assets) is appealing due to its relatively low capital requirement. Our analysis examined the air pollutant emissions for a biorefinery utilizing an ex situ catalytic fast pyrolysis process to produce raw bio-oil, with a design capacity of 2,000 dry metric tons of biomass per day. Such a biorefinery is capable of providing sufficient bio-oil to a 4,200 barrels per day capacity of fluidized catalytic cracking unit if the bio-oil is co-processed at 5% (by volume) feed rate. This research is focused on understanding the potential air pollutant regulatory and permitting implications for a refinery co-processing 5% bio-oil with 95% vacuum gas oil in a fluidized catalytic cracking unit for two scenarios: the first case assumes that an ex situ biorefinery is collocated with a petroleum refinery, and the second one assumes that a petroleum refinery will receive bio-oil from a stand-alone biorefinery. We estimated the potential-to-emit values for 4 biorefinery and FCC sizes and assessed technically feasible emission control options that could help to avoid being subject to prevention of significant deterioration requirements due to petroleum refinery modifications to co-process bio-oil. This research fills gaps and overcomes barriers related to air permitting requirements for co-processing bio-oil in existing refineries for various stakeholders. The insights gained from this analysis can facilitate decision making and help expedite permitting processes for petroleum refineries, which seek opportunities to produce lower carbon fuels in their existing infrastructure.

09 BIOMASS FUELS↗

Air Pollutant Emissions and Regulatory Implications of a Biorefinery Co-Processing Bio-Oil in a Petroleum Refinery

Pyrolysis oil, often referred to as bio-oil when derived from biomass through a fast pyrolysis process, has attracted considerable attention because of the high carbonaceous matter and high heating value compared to the original biomass. Pyrolysis oil provides a viable link between the agriculture/forestry and (petro-) chemical industry. Utilizing existing fossil fuel infrastructure by introducing bio-oil in petroleum refineries to produce renewable hydrocarbon fuels (i.e., repurposing existing assets) is appealing due to its relatively low capital requirement. Our analysis examined the air pollutant emissions for a biorefinery utilizing an ex situ catalytic fast pyrolysis process to produce raw bio-oil, with a design capacity of 2,000 dry metric tons of biomass per day. Such a biorefinery is capable of providing sufficient bio-oil to a 4,200 barrels per day capacity of fluidized catalytic cracking unit if the bio-oil is co-processed at 5% (by volume) feed rate. This research is focused on understanding the potential air pollutant regulatory and permitting implications for a refinery co-processing 5% bio-oil with 95% vacuum gas oil in a fluidized catalytic cracking unit for two scenarios: the first case assumes that an ex situ biorefinery is collocated with a petroleum refinery, and the second one assumes that a petroleum refinery will receive bio-oil from a stand-alone biorefinery. We estimated the potential-to-emit values for 4 biorefinery and FCC sizes and assessed technically feasible emission control options that could help to avoid being subject to prevention of significant deterioration requirements due to petroleum refinery modifications to co-process bio-oil. This research fills gaps and overcomes barriers related to air permitting requirements for co-processing bio-oil in existing refineries for various stakeholders. The insights gained from this analysis can facilitate decision making and help expedite permitting processes for petroleum refineries, which seek opportunities to produce lower carbon fuels in their existing infrastructure.

09 BIOMASS FUELS↗

A Perspective on Biomass-Derived Biofuels: From Catalyst Design Principles to Fuel Properties

The hazards to health and the environment associated with the transportation sector include smog, particulate matter, and greenhouse gas emissions. Conversion of lignocellulosic biomass into biofuels has the potential to provide significant amounts of infrastructure-compatible liquid transportation fuels that reduce those hazardous materials. However, the development of these technologies is inefficient, due to: (i) the lack of a priori fuel property consideration, (ii) poor shared vocabulary between process chemists and fuel engineers, and (iii) modern and future engines operating outside the range of traditional autoignition metrics such as octane or cetane numbers. In this perspective, we describe an approach where we follow a “fuel-property first” design methodology with a sequence of (i) identifying the desirable fuel properties for modern engines, (ii) defining molecules capable of delivering those properties, and (iii) designing catalysts and processes that can produce those molecules from a candidate feedstock in a specific conversion process. Computational techniques need to be leveraged to minimize expenses and experimental efforts on low-promise options. This concept is illustrated with current research information available for biomass conversion to fuels via catalytic fast pyrolysis and hydrotreating; outstanding challenges and research tools necessary for a successful outcome are presented.

BIOMASS FUELS↗

Integrated Biorefining: Coproduction of Renewable Resol Biopolymer for Aqueous Stream Valorization

Phenol-formaldehyde resins are major material classes that are used in a range of applications including composites, adhesives, foams, electronics, and insulation. While efforts have been made to produce renewable resins, there has yet to be an approach that offers potential for economic viability and meets all critical quality metrics. This failure can be attributed largely to the use of phenol and cresol homologues and to high separation costs. In this work, the use of phenol, cresol, and alkyl phenols derived from the aqueous phase generated from catalytic fast pyrolysis of biomass to produce a high-quality biobased resin is demonstrated. Production, through catalytic fast pyrolysis (CFP), separation, through distillation and adsorption unit operations, and synthesis, through typical resol chemistry, produced a resin with properties, such as curing kinetics and molecular weight, competitive with petroleum-derived resin. In conclusion, this work explores a pathway to value-added coproducts from a CFP waste stream, which has the potential to improve the economic viability of biofuels production.

09 BIOMASS FUELS↗

Corrosion and Chemical Characterization of Bio-Oils from Biomass with Varying Ash and Moisture Contents

As part of the Feedstock Conversion Interface Consortium four samples of pine chips (all combinations of low and high moisture and ash content) were collected and processed for fast pyrolysis. The prepared biomass samples were liquefied at the National Renewable Energy Laboratory (NREL) using the fast pyrolysis process. Following some characterization of the bio-oils at NREL, the bio-oils were shipped to Oak Ridge National Laboratory (ORNL) for corrosion testing and further characterization.The content and composition of ash in each bio-oil was determined. Corrosion testing consisted of exposing selected metallic and elastomer samples for 1000 hr at 50°C and for longer times at room temperature as well as electrochemical impedance spectroscopy measurements to assess relative corrosivity of the bio-oils. Chemical characterization was conducted to identify the corrosive component of the bio-oils as well as to define the chemical differences among the oils. It was hypothesized that there could be a catalytic effect from the higher ash content in two of the biomass sources. Results of these characterization and corrosion studies will be reported.

Keiser, Jim↗

Compatibility Assessment of Fuel System Elastomers with Bio-oil and Diesel Fuel

Bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with six elastomer types was evaluated against the elastomer performance in neat diesel fuel, which served as the baseline. The elastomers included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one type each of fluorosilicone, silicone, styrene butadiene rubber (SBR), polyurethane, and neoprene. Specimens of each material were exposed to the liquid and gaseous phases of the test fuels for 4 weeks at 60 degrees C, and properties in the wetted and dried states were measured. Exposure to bio-oil produced significant volume expansion in the fluorocarbons, NBRs, and fluorosilicone; however, excessive swelling (over 80%) was only observed for the two fluorocarbons and two NBR grades. The polyurethane specimens were completely degraded by the bio-oil. In contrast, both silicone and SBR exhibited lower swelling levels in bio-oil compared to neat diesel fuel. The implication is that, while polyurethane and fluorocarbon may not be acceptable seal materials for bio-oils, silicone may offer a lower cost alternative.

09 BIOMASS FUELS↗

Biopower: Impact of Biofuels Deployment to Replace Petroleum Liquids in Stationary Power Applications

Petroleum-based liquids are used in a portion of power generation applications in the United States, predominantly in the New England, Middle Atlantic, South Atlantic, and Pacific-Noncontiguous regions. Power plants that burn petroleum liquids, such as distillate or residual fuel oils, are generally used for short periods to accommodate peak electricity demands. The Energy Information Administration (EIA) estimated the U.S. consumption of petroleum liquids for electricity generation at 27 million barrels in 2018, representing a cost of $2.4 billion annually. This study assesses the potential to displace all or part of the petroleum liquids in U.S. power generation with biofuels. The biofuels for this application are assumed to be derived from terrestrial feedstocks, with conversion routes of both fast pyrolysis (bio-oil) and hydrothermal liquefaction (bio-crude). Regional models were used to assess the availability and cost of three different base materials: clean wood, forest residues, and corn stover; each was evaluated in the laboratory at small or experimental scales for conversion to bio-oil or bio-crude. The estimated biofuel production quantities depend on equivalent heating versus the current heavy fuel. In this report, the availability of each type of biomass for each section of the U.S. Census division is estimated using a conservative broker price (in each case) of $ 80 per dry tonne. The results show that the petroleum-liquid power generation in each of the Census Divisions could be supplied by one or more of the feedstocks evaluated. For all regions, clean wood supplies (only) could provide ample supply. For all but two regions (Middle Atlantic and New England), forest residues alone are sufficient. Finally, for all regions but three (Middle Atlantic, New England, and South Atlantic), corn stover alone is adequate. The Minimum Fuel Selling Price (MFSP) of bio-oil and bio-crude were also estimated for each feedstock type and Census Division. This analysis showed that fast pyrolysis bio-oil projections to be lower (14% on average) than current wholesale petroleum-based heating oil prices in each of the regions, assuming 100 dry tonnes/day processing capacity. However, bio-crude predictions were significantly higher (2X) in all cases. The effect of biorefinery size was also quantified. Based on the preliminary results in this study, it is apparent the biofuels could be an economical alternative for current petroleum liquids in U.S. power generation. However, additional research is needed to determine the necessary biofuel characteristics to support existing generation equipment. It is recommended that both power generation and biofuel production stakeholders to be engaged to outline the research and testing needed to identify the technical hurdles to enable the opportunity.

02 PETROLEUM↗

Bio-Oil Separation and Stabilization by Near-Critical Propane Fractionation

Bio-oils produced by thermal process are promising sources of sustainable, low greenhouse gas alternative fuels. These thermal processes are also well suited to decentralized energy production due to low capital and operating costs. Algae feedstocks for bio-oil production are of particular interest, due in part to their high-energy growth yields. Further, algae can be grown in non-arable areas in fresh, brackish, salt water, or even waste water. Unfortunately, bio-oils produced by thermal processes present significant stability challenges. These oils have complex chemical compositions, are viscous, reactive, and thermally unstable. Further, the components within the oils are difficult to separate by fractional distillation. By far, the most effective separation and stabilization method has been solvent extraction. However, liquid phase extraction processes pose two main obstacles to commercialization; they require a significant amount of energy to remove and recover the solvent from the product, and they have a propensity for the solvent to become contaminated with minerals from the char and ash present in the original bio-oil. Separation and fractionation of thermally produced bio-oils using supercritical fluids (SCF) offers the advantages of liquid solvent extraction while drastically reducing energy demands and the predisposition to carry over solids into the extracted phase. SCFs are dense fluids with liquid-like solvent properties and gas-like transport properties. Further, SCF density and solvent strength can be tuned with minor adjustments in pressure, co-solvent addition, or gas anti-solvent addition. Catalytic pyrolysis oils were produced from Scenedesmus dimorphus algae using a fluid catalytic cracking catalyst. Bio-oil produced from catalytic fast pyrolysis (CFP) was separated using critical fluids. Propane extraction was performed at 65 °C at a fluid reduced pressure of 2.0 (85 bar) using an eight to one solvent to feed ratio by weight. Extraction of catalytic fast pyrolysis oil with near critical propane produced an oil extract that was physically and chemically different from and more stable than the original oil. The propane extract displayed lower viscosity and lower average molecular weight. The species present in the propane extract were likely the less polar that would be expected from using a non-polar solvent (propane). Carbonyl containing species in the extract were likely ketones and esters. The raffinate contained a higher amnount of OH bonded species along with the more polar more polar acids, amides, and alcohols. The higher concentration of nitrogen in the raffinate may confirm the presence of amides. Viscosity of the propane extract increased only half as much as that of the CFP bio-oil. Further, In situ NMR aging studies showed that the propane extract was more stable than the raw oil. In conclusion, propane extraction is a promising method to decrease the nitrogen content of bio-oils and to improve the stability of bio-oils obtained by the catalytic pyrolysis of algae based biomass.

09 BIOMASS FUELS↗

Improved Hydrogen Utilization and Carbon Recovery for Higher Efficiency Thermochemical Bio-oil Pathways

The goal of this project was to develop a novel integrated direct biomass liquefaction process with improved hydrogen utilization and better carbon efficiency compared to other thermochemical conversion technologies for advanced biofuels production. Reactive catalytic fast pyrolysis, or RCFP, combines a robust hydrodeoxygenation catalyst for in situ pyrolysis in an excess of hydrogen at atmospheric (low) pressure. RCFP was developed to leverage advantages from catalytic fast pyrolysis (process simplicity and improved bio-crude quality) and biomass hydropyrolysis (enhanced hydrodeoxygenation) to produce a thermally-stable, low oxygen containing bio-crude intermediate that can be upgraded in a single conventional hydroprocessing step to produce gasoline- and diesel-range hydrocarbons. In parallel, carbon lost to the aqueous phase was recovered as renewable methane from anaerobic digestion to offset fossil carbon required to meet the hydrogen demand of the integrated process.

09 BIOMASS FUELS↗

Life-Cycle Assessment of Alternative Pyrolysis-Based Transport Fuels: Implications of Upgrading Technology, Scale, and Hydrogen Requirement

In an effort to diversify liquid fuel supply and address climate change, there are ongoing studies on the use of biomass as a renewable source of energy. Bio-oil produced from fast pyrolysis of biomass is a promising substitute for fossil fuels that can meet climate change mitigation goals, spur rural economies, and diversify liquid fuel supply. However, for bio-oil to be used as a transportation fuel, it requires upgrading to remove oxygen present in the oil. Hydrodeoxygenation (HDO) is one means of upgrading fast pyrolysis oil, however, one of its main limitations is a large hydrogen requirement. We evaluate an alternative electrochemical deoxygenation (EDOx) method that uses catalytic electrode membranes on a ceramic, oxygen permeable support, to generate hydrogen in-situ for deoxygenation at the cathode and remove oxygen at the anode. We analyze the life cycle greenhouse gas (GHG) emissions and scale effects of gas-phase upgrading pyrolysis oil (300 metric tons per day (MTPD)) using EDOx, which reduces energy needs for condensing the pyrolysis gas to bio-oil prior to deoxygenation. The dispersed woody biomass can be accessed and thus more efficiently used if a small scale process is used to densify and stabilize the bio-oil product. We evaluate two configurations of the small-scale deoxygenation, full electrochemical deoxygenation (EDOx), which removes 100% of oxygen present in the bio-oil and partial EDOx, which removes 96% of oxygen present in the bio-oil and compare them to the large scale (2000 MTPD) deoxygenation (HDO). The partial EDOx process has the lowest total GHG emissions of 4.95 gCO2 eq. and 7.43 gCO2 eq. per MJ of a vehicle operated with diesel and gasoline respectively compared to full EDOx (8.36 g CO2 eq. diesel, 10.86 g CO2 eq. gasoline) and HDO (39 gCO2 eq. per MJ for diesel and gasoline). In addition, with the EDOx processes, we can site 10 times more small-scale pyrolysis upgrading sites compared to HDO, suggesting that small-scale on-site partial or full deoxygenation can reach more inaccessible forest biomass resources.

bio-oil hydrotreating, Biomass, deoxygenation, sol↗

Development of the Basis for an Analytical Protocol for Feeds and Products of Bio-oil Hydrotreatment

Methods for easily following the main changes in the composition, stability, and acidity of bio-oil in hydrotreatment are presented. The correlation to more conventional methods is provided. Depending on the final use the upgrading requirement is different. This will create challenges also for the analytical protocol. Polar pyrolysis liquids and their products can be divided into five main groups with solvent fractionation the change in which is easy to follow. This method has over ten years been successfully used for comparison of fast pyrolysis bio-oil quality, and the changes during handling, and storage, provides the basis of the analytical protocol presented in this paper. The method has most recently been used also for characterisation of bio-oil hydrotreatment products. Discussion on the use of gas chromatographic and spectroscopic methods is provided. In addition, fuel oil analyses suitable for fast pyrolysis bio-oils and hydrotreatment products are discussed.

02 PETROLEUM↗

Pyrolytic oil of banana (Musa spp.) pseudo-stem via fast process

This study was an attempt to produce bio-oil from banana pseudo-stem, a waste of banana cultivation, using fast pyrolysis technology. The compositions were determined and the thermal degradation behaviour of the raw material was analyzed using Perkin-Elmer Simultaneous Thermal Analyzer (STA) 6000. A 300 g/h fluidized bed bench scale fast pyrolysis unit, assembled with double screw feeders and cyclones, operating at atmospheric pressure, was used to obtain the pyrolysis liquid. The study involves the impact of the following key variables; the reactor temperature in the range of 450–650 °C, and the residence time in the range of 1.00–3.00 s. The particle size was set at 224-400 µm. The properties of the liquid product were analyzed for calorific heating value, pH value, conductivity, water and char content. The basic functional groups of the compositions were also determined using FTIR. The properties of the liquid product were compared with other wood derived bio-oil. The pyrolysis liquids derived from banana pseudo-stem were found to be in an aqueous phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation kinetics of biochar from woody and herbaceous biomass

The goal of this study was to determine oxidation kinetics for biochar produced from fast pyrolysis of various biomass feedstocks. In particular, the role of inherent ash content on the oxidation rate was evaluated. Thermogravimetric analysis (TGA) and fluidized bed combustion experiments were used to explore oxidation kinetics of six fast pyrolysis produced biochars with diverse ash content. Here, the reaction rates varied by a factor of three under chemical kinetic-limited conditions, demonstrating inorganic content impacts oxidation rate. Chemical kinetic rate coefficients were proposed as a function of compositional parameters to determine overall fit and impact. Potassium content was found to have a positive correlation, best describing the differences in the oxidation kinetic rate coefficients. Additionally, feedstocks were subjected to a 1 M HCl acid wash mitigating the catalytic activity of the metals. Acid washed biochars had lower oxidation kinetic rates compared to their unwashed counterparts, indicating the removal of catalytically active metals reduced oxidation rate. Gas composition (CO/CO 2 ) was measured during fluidized bed experiments for both acid-washed and unwashed biochars, which varied between the six biochars. Formation of CO 2 was greatly affected by catalytic metals, finding potassium content to correlate well with a higher percentage of CO 2 formation as compared to CO. Comparison of oxidation rates were made between the two experimental apparatuses to measure the effect of attrition on biochar oxidation.

09 BIOMASS FUELS↗

Particle size and shape distributions of hammer milled pine

Particle size and shape distributions impact particle heating rates and diffusion of volatized gases out of particles during fast pyrolysis conversion, and consequently must be modeled accurately in order for computational pyrolysis models to produce reliable results for bulk solid materials. For this milestone, lodge pole pine chips were ground using a Thomas-Wiley #4 mill using two screen sizes in order to produce two representative materials that are suitable for fast pyrolysis. For the first material, a 6 mm screen was employed in the mill and for the second material, a 3 mm screen was employed in the mill. Both materials were subjected to RoTap sieve analysis, and the distributions of the particle sizes and shapes were determined using digital image analysis. The results of the physical analysis will be fed into computational pyrolysis simulations to create models of materials with realistic particle size and shape distributions. This milestone was met on schedule.

36 MATERIALS SCIENCE↗