Final flight control software package for digital flight control and landing system
Flight control software package for digital flight control and landing system of CH-46C helicopter
Source record↗
SEARCH · Search NASA
Results for “Flight”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flight determined acceleration and climb performance of an F-104G airplane for use in an optimum flight path computer program
Computer program for optimum flight path defined by flight test investigation of performance characteristics /excess thrust, fuel flow, and climb potential/ of F-104G aircraft
Marshall, R. T.↗
A flight study of the use of direct-lift-control flaps to improve station keeping during in-flight refueling
To investigate the effectiveness of fast-acting flaps as direct-lift-control (DLC) devices on a fighter airplane, the aileron servo systems of an F-100C variable-stability airplane were modified to provide symmetrical actuation of the surfaces. Initial flight tests using DLC indicated that the task of formation flying and, hence, in-flight refueling could be eased by actuating the DLC flaps through the conventional control stick, with the degree of improvement depending on the basic stability of the receiver aircraft. Results of refueling approaches and connections with U.S. Air Force tankers indicated a moderate overall improvement in vertical station-keeping performance (approximately 19 percent) and a sizeable overall decrease in receiver airplane motions and control activity (approximately 40 percent) with DLC.
Mcneill, W. E.↗
Technical evaluation report on AGARD Flight Mechanics Panel Symposium on Flight in Turbulence
The proceedings of a conference on the effects of atmospheric turbulence on flight characteristics are presented. The subjects discussed include the following: (1) turbulent environment, (2) operational problems, (3) design criteria, and (4) artificial aids for flight improvement. One conclusion is that there is a critical need for cross correlation measurements between various low atmosphere turbulence components. Additional discussion were held concerning wake vortex research for wake vortex detection and avoidance.
Aiken, W. S., Jr.↗
The 737 graphite composite flight spoiler flight service evaluation
The flight service experience of 108 graphite-epoxy spoilers on 737 transport aircraft, and related ground-based environmental exposure of graphite-epoxy material specimens were evaluated. Four spoilers were installed on each of 27 aircraft for a 5-year study. As of February 28, 1975, a total of 294,280 spoiler flight-hours and 460,686 spoiler landings were accumulated. Based on visual, ultrasonic, and destructive testing, no moisture migration into the honeycomb core and no core corrosion has occurred. Tests of removed spoilers and of ground-based exposure specimens after the first year of service indicate no significant changes in composite strength.
Stoecklin, R. L.↗
ATS-6 - Flight performance of the Advanced Thermal Control Flight Experiment
The Advanced Thermal Control Flight Experiment on ATS-6 was designed to demonstrate the thermal control capability of a thermal diode (one-way) heat pipe, a phase-change material for thermal storage, and a feedback-controlled heat pipe. Flight data for the different operational modes are compared to ground test data, and the performance of the components is evaluated on an individual basis and as an integrated temperature-control system.
Kirkpatrick, J. P.↗
Noise measurements in a free-jet, flight simulation facility - Shear layer refraction and facility-to-flight corrections
The conversion of free-jet facility into equivalent flyover results is discussed. The essential problem is to 'calibrate out' the acoustic influence of the outer free-jet shear layer on the measurement, since this is absent in the flight case. Results are presented which illustrate the differences between current simplified models (vortex-sheet and geometric acoustics), and a more complete model based on the Lilley equation. Finally, the use of geometric acoustics for facility-to-flight data conversion is discussed.
Morfey, C. L.↗
Feasibility of producing closed-cell metal foams in a zero-gravity environment from sputter deposited inert gas-bearing metals and alloys. Post-flight technical report, SPAR flight 2
Metallography from experiment 24-10 obtained on the second space processing applications rocket (SPAR) flight is discussed. Results are considered along with results from the related experiments on the first SPAR flight. Conclusions are presented.
Patten, J. W.↗
Flight evaluation of advanced flight control systems and cockpit displays for powered-lift STOL Aircraft
A flight research program was conducted to assess the improvements, in longitudinal path control during a STOL approach and landing, that can be achieved with manual and automatic control system concepts and cockpit displays with various degrees of complexity. NASA-Ames powered-lift Augmentor Wing Research Aircraft was used in the research program. Satisfactory flying qualities were demonstrated for selected stabilization and command augmentation systems and flight director combinations. The ability of the pilot to perform precise landings at low touchdown sink rates with a gentle flare maneuver was also achieved. The path-control improvement is considered to be applicable to other powered-lift aircraft configurations.
Franklin, J. A.↗
Lateral aerodynamic parameters extracted from flight data for the F-8C airplane in maneuvering flight
Flight test data are used to extract the lateral aerodynamic parameters of the F-8C airplane at moderate to high angles of attack. The data were obtained during perturbations of the airplane from steady turns with trim normal accelerations from 1.5g to 3.0g. The angle-of-attack variation from trim was negligible. The aerodynamic coefficients extracted from flight data were compared with several other sets of coefficients, and the extracted coefficients resulted in characteristics for the Dutch roll mode (at the highest angles of attack) similar to those of a set of coefficients that have been the basis of several simulations of the F-8C.
Suit, W. T.↗
Flight test evaluation of a method to determine the level flight performance of a propeller-driven aircraft
The overall drag of the aircraft is expressed in terms of the measured increment of power required to overcome a corresponding known increment of drag, which is generated by a towed drogue. The simplest form of the governing equations, D = delta D SHP/delta SHP, is such that all of the parameters on the right side of the equation can be measured in flight. An evaluation of the governing equations has been performed using data generated by flight test of a Beechcraft T-34B. The simplicity of this technique and its proven applicability to sailplanes and small aircraft is well known. However, the method fails to account for airframe-propulsion system.
Bridges, P. G.↗
Flight test results of the Strapdown hexad Inertial Reference Unit (SIRU). Volume 1: Flight test summary
Flight test results of the strapdown inertial reference unit (SIRU) navigation system are presented. The fault-tolerant SIRU navigation system features a redundant inertial sensor unit and dual computers. System software provides for detection and isolation of inertial sensor failures and continued operation in the event of failures. Flight test results include assessments of the system's navigational performance and fault tolerance.
Hruby, R. J.↗
The 737 graphite composite flight spoiler flight service evaluation
The flight service experience of 111 graphite-epoxy spoilers on 737 transport aircraft and related ground based enviromental exposure of graphite-epoxy material specimens is reported. Spoilers were installed on 28 aircraft representing seven major airlines operating throughout the world. Over 1,188,367 spoiler flight hours and 1,786,837 spoiler landings were accumulated by this fleet. Tests of removed spoilers and ground-based exposure specimens after the fifth year of service indicate modest changes in composite strength properties. Two incidents of trailing edge delamination with subsequent core corrosion were observed. Based on visual, ultrasonic, and destructive testing, there has been no evidence of moisture migration into the honeycomb core and no core corrosion.
Hoffman, D. J.↗
Accelerated development and flight evaluation of active controls concepts for subsonic transport aircraft. Volume 1: Load alleviation/extended span development and flight tests
Active wing load alleviation to extend the wing span by 5.8 percent, giving a 3 percent reduction in cruise drag is covered. The active wing load alleviation used symmetric motions of the outboard ailerons for maneuver load control (MLC) and elastic mode suppression (EMS), and stabilizer motions for gust load alleviation (GLA). Slow maneuvers verified the MLC, and open and closed-loop flight frequency response tests verified the aircraft dynamic response to symmetric aileron and stabilizer drives as well as the active system performance. Flight tests in turbulence verified the effectiveness of the active controls in reducing gust-induced wing loads. It is concluded that active wing load alleviation/extended span is proven in the L-1011 and is ready for application to airline service; it is a very practical way to obtain the increased efficiency of a higher aspect ratio wing with minimum structural impact.
Johnston, J. F.↗
The 737 graphite composite flight spoiler flight service evaluation
A flight service report was prepared which covers the flight service experience of 111 graphite epoxy spoilers on 737 transport aircraft and related ground based environmental exposure of graphite epoxy material specimens. Spoilers were installed on 28 aircraft representing seven major airlines operating throughout the world. Tests of removed spoilers after the seventh year of service continue to indicate modest changes in composite strength properties. Two spoilers were tested, one with 6 and one with 7 years of service, and both had residual strengths that fall within the original static strength scatter band. Both these units had typical service included discrepancies when tested. Based on visual, ultrasonic, and destructive inspection there continues to be no evidence of moisture migration into the honeycomb core and no core corrosion in the deployed units.
Coggeshall, R. L.↗
The evaluation of studies of flight personnel of the German Lufthansa on the question of stress during flights on the short European routes
Medical studies were undertaken on the stress experience by the cockpit crew working the short routes in Europe and a special attempt was made to discover whether signs of a summation of stress due to flight work become visible during a circuit of several days. For this purpose the pulse and respiratory rates were determined for 22 crew members as an indication of the acute stress occurring during the flight and the amount of stress hormone in the urine as an indication of the extent of total stress in an extended study period.
Klein, K. E.↗
Guidance and flight control demonstration in a helicopter flight environment using a laser-gyro inertial navigation system
The present flight test program results indicate that an all-digital inertial sensing system can be used in helicopter flight guidance and control, provided that the rotor rotation-induced motions are filtered from body rate and accelerometer signals before they are used in the feedback control system. Attention is given to the problem posed by the different repetition rates used by each of the manufacturers involved in the procurement of such all-digital subsystems. Autopilot designers must accordingly predict the need for filters and install them where called for in the sensor software. Two alternatives to this method are explored. Recent technological developments indicate that strapped down inertial systems will replace vertical and direction gyros as well as body rate accelerometers in future aircraft systems.
Schmidt, S. F.↗
Flight service evaluation of composite components on the Bell helicopter model 206L, flight service report
The flight service components for the Bell Model 206L JetRanger helicopter are examined. The components were placed in service in the Continental United States, Canada, and Alaska. The status of 34 sets of components is discussed. Approximately 27,500 flight hours were accumulated on the components as of 1 August 1983. Three sets of components and one-fifth of the exposure coupons were returned and tested. The results are given. The overall behavior of the components and associated problems are discussed.
Zinberg, H.↗