Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flow Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Numerical simulation of flow path in the oxidizer side hot gas manifold of the Space Shuttle main engine

The purpose of this study is to examine in detail incompressible laminar and turbulent flows inside the oxidizer side Hot Gas Manifold of the Space Shuttle Main Engine. To perform this study, an implicit finite difference code cast in general curvilinear coordinates is further developed. The code is based on the method of pseudo-compressibility and utilize ADI or implicit approximate factorization algorithm to achieve computational efficiency. A multiple-zone method is developed to overcome the complexity of the geometry. In the present study, the laminar and turbulent flows in the oxidizer side Hot Gas Manifold have been computed. The study reveals that: (1) there exists large recirculation zones inside the bowl if no vanes are present; (2) strong secondary flows are observed in the transfer tube; and (3) properly shaped and positioned guide vanes are effective in eliminating flow separation.

Lin, S. J.↗
NASA NTRS1989

Numerical simulation of flow through a two-strut scramjet inlet

A three-dimensional, Reynolds-averaged Navier-Stokes code has been used to numerically analyze flow through a two-strut, supersonic combustion ramjet (scramjet) inlet configuration. It solves the governing equations in full conservation form using either a fully explicit or explicit-implicit method. An algebraic, two-layer eddy-viscosity model is used for turbulent flow calculations. The analysis allows inclusion of end effects that are caused by the aft placement of the cowl on the underside of the inlet. A special grid has been developed to accommodate the struts embedded in the inlet flowfield. Detailed numerical results are presented here for the two-strut configuration, and a comparison is made with the available experimental results.

Kumar, Ajay↗
NASA NTRS1990

Simulated Hypersonic Flows About A Blunt Body

Unsteady and steady flows compared. Report describes computer numerical study of two-dimensional, unsteady, viscous, hypersonic flows of air about blunt body with impinging shock. This kind of flow represents many practical phenomena; for example, interaction of fluctuating bow shock of hypersonic airplane with shocks of leading edge of wing or of lip of cowl at inlet to engine. Such interactions give rise to complicated, moving shock-on-shock patterns.

Kutler, P.↗
NASA NTRS1990

Computational simulation of flows about hypersonic geometries with sharp leading edges

Hypersonic waverider design has become an important concern in the aerospace industry. As one part of an inverse design effort for waveriders, work has been done to apply existing Euler and Navier-Stokies flow solvers to hypersonic geometries with sharp leading edges. Previously, calculations were done on bodies with rounded leading edges or with conical solutions for the nose initial conditions. In this paper, solutions are computed about waveriders and conical shapes with sharp leading edges without resorting to either shortrcut. All solutions show attached shocks with fully supersonic flows at the nose and along the leading edges. Flows about several waverider shapes are shown, as well as a preliminary cone with inlet calculation to study the shock/inlet interaction.

Jones, Kevin D.↗
NASA NTRS1991

Streamwise Algorithm For Simulation Of Flow

Algorithm for numerical solution of Euler and Navier-Stokes equations of unsteady flow incorporates upwind differencing based on streamwise direction. Generalized to calculate unsteady transonic flows over wings; suitable for analyses of flutter of wings affected by such flows.

Goorjian, Peter M.↗
NASA NTRS1991

Numerical simulation of flow past a tapered cylinder

The unsteady three-dimensional low Reynolds number flow past a tapered cylinder is computed. The spanwise variation in natural shedding frequency results in interesting three-dimensional flow phenomena. The computed hot-wire and spectral data are very similar to experimental results. The computation was done on the Connection Machine, a massively parallel computer; highlights of the capabilities of the Connection Machine for computation and visualization of three-dimensional unsteady flow fields are shown.

Jespersen, Dennis C.↗
NASA NTRS1995

Progress in simulating industrial flows using two-equation models: Can more be achieved with further research?

This viewgraph presentation provides a brief review of two-equation eddy-viscosity models (TEM's) from the perspective of applied CFD. It provides objective assessment of both well-known and newer models, compares model predictions from various TEM's with experiments, identifies sources of modeling error and gives historical perspective of their effects on model performance and assessment, and recommends directions for future research on TEM's.

Haroutunian, Vahe↗
NASA NTRS1996

A New Procedure for Simulating Unsteady Flows Through Turbomachinery Blade Passages

The development of two new unsteady wake-blade row aerodynamic interaction models and of a rotor-stator unsteady aerodynamic interaction model are outlined. The solutions of Adamczyk's average-passage flow model were used. The responses to the potential disturbances through a blade row were calculated using the MSUTC code. This code can run with and without the use of wall functions. The solver is an implicit finite volume method with flux Jacobians which are evaluated by the flux-vector splitting and the residual fluxes by the Roe's flux-difference splitting.

Chen, Jen Ping↗
NASA NTRS1990

Numerical Simulation of Flow Past a Tapered Cylinder

We have computed the unsteady three-dimensional low Reynolds number flow past a tapered cylinder. The spanwise variation in natural shedding frequency results in interesting three-dimensional flow phenomena. Our computed hot-wire and spectral data are very similar to experimental results. The computation was done on the Connection Machine, a massively parallel computer, we highlight the capabilities of the Connection Machine, for computation and visualization of three-dimensional unsteady flow fields.

Jespersen, Dennis↗
NASA NTRS2002

Numerical Simulation of Flow, Pressure and Motion of Front Back Fingers in a Two Rows Finger Seal

This proposal fits within the programmatic long-term development direction for turbine engine seals of the Seal Team of the Mechanical Component Branch. The intended work concerns the further development of the Finger Seal concept which is a compliant passive-adaptive seal meant to mitigate (and eventually replace) the shortcomings of the entire class of rigid seals used today (labyrinth, honeycomb, mechanical face seals) in the gas turbines and compressors,

Braun, M. Jack↗
NASA NTRS2004

A Structured-Grid Quality Measure for Simulated Hypersonic Flows

A structured-grid quality measure is proposed, combining three traditional measurements: intersection angles, stretching, and curvature. Quality assesses whether the grid generated provides the best possible tradeoffs in grid stretching and skewness that enable accurate flow predictions, whereas the grid density is assumed to be a constraint imposed by the available computational resources and the desired resolution of the flow field. The usefulness of this quality measure is assessed by comparing heat transfer predictions from grid convergence studies for grids of varying quality in the range of [0.6-0.8] on an 8'half-angle sphere-cone, at laminar, perfect gas, Mach 10 wind tunnel conditions.

Alter, Stephen J.↗
NASA NTRS1981

Higher-level simulations of turbulent flows

The fundamentals of large eddy simulation are considered and the approaches to it are compared. Subgrid scale models and the development of models for the Reynolds-averaged equations are discussed as well as the use of full simulation in testing these models. Numerical methods used in simulating large eddies, the simulation of homogeneous flows, and results from full and large scale eddy simulations of such flows are examined. Free shear flows are considered with emphasis on the mixing layer and wake simulation. Wall-bounded flow (channel flow) and recent work on the boundary layer are also discussed. Applications of large eddy simulation and full simulation in meteorological and environmental contexts are included along with a look at the direction in which work is proceeding and what can be expected from higher-level simulation in the future.

Ferziger, J. H.↗
NASA NTRSDate not supplied

Simulation of Fluid Flow and Collection Efficiency for a SEA Inc. Multi-Element Probe and Ice Crystal Detector Using GlennICE

Numerical simulation results of fluid flow and collection efficiency of the Science Engineering Associates Inc. Multi-Element Probe (Multiwire) and Ice Crystal Detector (ICD) are presented. Fluid flow simulations were conducted using NASA's FUN3D while collection efficiency simulations were conducted using NASA's LEWICE3D software and GlennICE software. For both probes, 3D unsteady flow results were time-averaged. Simulations were computed for free steam velocities ranging from 85 to 185 m/s and freestream total pressures of 44.8 and 93.1 kPa. Collection efficiency results were computed for four spherical particle diameter sizes of 5, 20, 50, and 100 µm. GlennICE collection efficiency results for the multiwire were compared with previously published collection efficiency values calculated using LEWICE3D. Numerical collection efficiency results for the Ice Crystal Detector are presented for the first time.

aircraft, icing, Computational Fluid Dynamics↗
NASA NTRS1991

Spectral simulations of reacting turbulent flows

Spectral methods for simulating flows are reviewed, emphasizing their recent applications to reacting flow problems. Various classifications of spectral methods and their convergence properties are described and the 'spectral element' method is presented, highlighting its flexibility in dealing with complex flow geometries. The applications considered include chemical reactions in homogeneous turbulence, temporally evolving mixing layers, variable-density simulations, nonequilibrium chemistry, and spatially evolving mixing layers.

Mcmurtry, Patrick A.↗
NASA NTRS1992

A hybrid flow model for charged and neutral particles around spacecraft in Low Earth Orbit

A flow simulation for charged and neutral particles around spacecraft is given that combines the fully coupled effects of neutral particle flow, plasma flow, electromagnetic field effects, and spacecraft charging. The simulation allows for chemically reacting flows (associative ionization, dissociation, and chain exchange) and for thermal accommodation at a spacecraft surface. The solution procedure was applied to several types of flows with orbital altitudes ranging from 250 km to 500 km. Excellent agreement with previously verified computational algorithms was obtained for both the neutral and charged particle cases. Results for the full flow simulation are presented for altitudes of 250 km and 500 km.

Justiz, Charles R.↗
NASA NTRS1996

The incremental unknowns-a multilevel scheme for the simulation of turbulent channel flows

In numerical simulation of complex flows, it is important to identify different length scales of the flow and treat them differently. In this report, we introduce a new multilevel scheme for simulating turbulent channel flows. Two different versions of the scheme, namely the spectral and finite difference versions, are presented. The spectral version of the scheme is based on a spectral-Galerkin formulation which provides a natural decomposition of the flow into small and large wavelength parts, and which leads to linear systems that can be solved with quasi-optimal computational complexity. In the finite difference version, the Incremental Unknown (IU) is used to separate the length scales. Preliminary numerical results indicate that the scheme is well suited for turbulence computations and provides results which are comparable to that by Direct Numerical Simulation (DNS) but with significantly less CPU time.

Chen, M.↗