Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generating Site”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Unraveling the implications of finite specimen size on the interpretation of dynamic experiments for polycrystalline aluminum through direct numerical simulations

Normal and Pressure-shear plate impact (NPI and PSPI) experiments are popular experimental techniques for studying the mean-field macroscopic behavior of polycrystalline metals under high-rate dynamic loading. However, since both configurations rely upon geometry for subjecting the specimen to high strain rates, these experiments often involve a limited specimen size. Moreover, because of the inherent heterogeneities present within polycrystalline metals, it is difficult to ascertain if the size of the specimen and/or regions where measurements are made are sufficiently large for making representative inferences about the mean-field macroscopic properties from single-point velocity measurements. In the present study, we quantify the expected measurement variability on observable point measurements in NPI and PSPI experiments by carrying out direct numerical simulations (DNS) of statistically representative polycrystalline microstructures subjected to dynamic compression and compression-shear loading. In particular, we consider the role of specific material heterogeneities (e.g. the grain-to-grain difference in size, crystallographic orientation) on dispersion in the normal and transverse particle velocity records and on local fluctuations in key state variables (e.g. velocity, accumulated plastic strain) by incorporating these effects directly into a representative synthetic microstructure geometry and crystalline description of pure polycrystalline aluminum. The form of the present study is a large parametric investigation, consisting of ten ensembles of one hundred simulations. Each of the thousand simulations reflects a randomly realized synthetic microstructure in one of five cases of decreasing average grain size for the two loading configurations. Our analysis of the DNS results demonstrates that for both of these experimental configurations, the grain size directly correlates with the coefficient of variation (CV) in simulated point measurements, showing a convergent decrease in CV to zero (i.e. particle velocity record approaches the mean-field value) with decreasing grain size. Remarkably, the magnitude of variations in the particle velocity record is shown to be largest where the deviatoric stresses are most significant. In the case of NPI, this occurs at the elastic and plastic wavefront, whereas, in the case of PSPI, the magnitude of fluctuations are approximately constant throughout the experimental window time. The reasoning for the scatter in particle velocity due to the heterogeneous microstructure is demonstrated to be dependent on the mechanisms for accommodating deformation and on the interaction of reflection waves generated at sites of heterogeneities occurring at the scale of grains. Lastly, we develop a power-law description for the magnitude of scattering versus characteristic length, which provides a statistical framework for assessing the required number of grains per characteristic specimen dimension for minimizing scatter within these two experimental configurations (NPI, PSPI).

36 MATERIALS SCIENCE↗

An Aromatic Cap Seals the Substrate Binding Site in an ECF-Type S Subunit for Riboflavin

ECF transporters are a family of active membrane transporters for essential micronutrients, such as vitamins and trace metals. Found exclusively in archaea and bacteria, these transporters are composed of four subunits: an integral membrane substrate-binding subunit (EcfS), a transmembrane coupling subunit (EcfT), and two ATP-binding cassette ATPases (EcfA and EcfA'). We have characterized the structural basis of substrate binding by the EcfS subunit for riboflavin from Thermotoga maritima, TmRibU. TmRibU binds riboflavin with high affinity, and the protein–substrate complex is exceptionally stable in solution. The crystal structure of riboflavin-bound TmRibU reveals an electronegative binding pocket at the extracellular surface in which the substrate is completely buried. Analysis of the intermolecular contacts indicates that nearly every available substrate hydrogen bond is satisfied. A conserved aromatic residue at the extracellular end of TM5, Tyr130, caps the binding site to generate a substrate-bound, occluded state, and non-conservative mutation of Tyr130 reduces the stability of this conformation. Using a novel fluorescence binding assay, we find that an aromatic residue at this position is essential for high-affinity substrate binding. Comparison with other S subunit structures suggests that TM5 and Loop5-6 contain a dynamic, conserved motif that plays a key role in gating substrate entry and release by S subunits of ECF transporters.

59 BASIC BIOLOGICAL SCIENCES↗

Responsive lignin for shape memory applications

Here, we analyze thermally unstable lignin linkages that generate reactive sites and promote crosslinking reactions during thermal annealing at 180 °C. This results in significantly enhanced glass transition temperature (Tg). We use these characteristics of lignin to enhance interfacial reactivity of a lignin-based multiphase polymer synthesized by a dynamic shear process. An approximately 18 °C increase in Tg and more than 230% increase in storage modulus (E') are achieved by thermally annealing the 50 wt% hardwood lignin-nitrile rubber composite for 5 h at 180 °C. Tunable chemical and physical crosslinks within lignin and rubber resulted in shape programmability demonstrating excellent strain recovery of the synthesized renewable materials. The substantial improvement of the elastic work density of the lignin-based elastomers allows a broader applicable stress window for stress/strain sensing. The renewable materials also exhibit a better strain recovery after thermal annealing.

36 MATERIALS SCIENCE↗

Engineering acid-base active sites on an N-doped biochar catalyst for microwave-assisted biodiesel production from waste cooking oil

Acid-base bifunctional catalysts play a crucial role in converting high-free fatty acid (FFA) feedstocks into biodiesel by enabling the simultaneous esterification and transesterification of triglycerides in a single step, thereby minimizing saponification and streamlining the process. In this study, we report the design and development of a novel N-doped acid-base bifunctional biochar catalyst synthesized from renewable biomass precursors- glucose and chitosan. The catalyst’s acidic sites were introduced via surface functionalization with o-sulfobenzoic acid cyclic anhydride, grafting -SO₃H groups onto the carbon framework, while basic sites were generated from amine functionalities (-NH) derived from chitosan, yielding a robust and truly bifunctional surface. The catalyst was characterized and used for the microwave-assisted transesterification of waste cooking oil, and process optimization using response surface methodology (RSM-CCD) yielding a maximum biodiesel yield of 98.8 ± 0.4% under optimal conditions (methanol-to-oil molar ratio 20:1, catalyst loading 5.7 wt%, temperature 99 °C, and reaction time 46.6 min). The catalyst demonstrated good stability, maintaining a yield of 92.2 ± 0.4% after eight reuse cycles. A Life Cycle Assessment (LCA) conducted for 1 kg of biodiesel production revealed a global warming potential of 0.85 kg CO 2 eq and human toxicity potential of 1.59 kg 1,4-DB eq, with the largest environmental contributions arising from catalyst preparation and reuse. In conclusion, this work highlights a green and circular approach to biodiesel production, combining renewable catalyst design, waste feedstock utilization, and quantitative sustainability assessment to guide future developments in sustainable catalysis and biofuel engineering.

Bifunctional catalyst↗

Customer economics of residential photovoltaic systems: Sensitivities to changes in wholesale market design and rate structures

We report that the customer economics of U.S. residential photovoltaics (PV) often depend on retail electricity rates, because most utilities compensate customer-sited PV generation via net metering. The future bill savings from net metering are uncertain and dependent on retail rate structures, wholesale market design, and renewable penetration levels, among other factors. We explore the impact of the following assumptions on the bill savings from residential PV: a wholesale electricity market design with a price cap (as opposed to an energy-only market); a retail rate with a fixed customer charge (as opposed to a fully volumetric rate); and increasing-block pricing (as opposed to a non-varying flat rate). A wholesale price cap can dampen the expected bill-savings erosion due to moving from a low to a high renewables scenario for customers with time-varying rates and net metering. Moving from a fully volumetric rate to a two-part tariff rate with a fixed customer charge could severely Erode the bill savings under net metering, because PV generation could only displace the (reduced) volumetric portion of the rate. Lastly, increasing-block pricing might have an even greater impact on the bill savings from behind-the-meter PV than the other uncertainties explored in this paper.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Optimal deployment of solar index

There is a growing trend, generally caused by state-specific renewable portfolio standards, to increase the importance of renewable electricity generation within generation portfolios. While RPS assist with determining the composition of generation they do not, for the most part, dictate the location of generation. Using data from various public sources, the authors create an optimal index for solar deployment. (author)

14 SOLAR ENERGY↗

A multiobjective modeling approach to locate multi-compartment containers for urban-sorted waste

The location of multi-compartment sorted waste containers for recycling purposes in cities is an important problem in the context of urban waste management. The costs associated with those facilities and the impacts placed on populations are important concerns. This paper introduces a mixed-integer, multiobjective programming approach to identify the locations and capacities of such facilities. The approach incorporates an optimization model in a Geographical Information System (GIS)-based interactive decision support system that includes four objectives. The first objective minimizes the total investment cost; the second one minimizes the average distance from dwellings to the respective multi-compartment container; the last two objectives address the 'pull' and 'push' characteristics of the decision problem, one by minimizing the number of individuals too close to any container, and the other by minimizing the number of dwellings too far from the respective multi-compartment container. The model determines the number of facilities to be opened, the respective container capacities, their locations, their respective shares of the total waste of each type to be collected, and the dwellings assigned to each facility. The approach proposed was tested with a case study for the historical center of Coimbra city, Portugal, where a large urban renovation project, addressing about 800 buildings, is being undertaken. This paper demonstrates that the models and techniques incorporated in the interactive decision support system (IDSS) can be used to assist a decision maker (DM) in analyzing this complex problem in a realistically sized urban application. Ten solutions consisting of different combinations of underground containers for the disposal of four types of sorted waste in 12 candidate sites, were generated. These solutions and tradeoffs among the objectives are presented to the DM via tables, graphs, color-coded maps and other graphics. The DM can then use this information to 'guide' the IDSS in identifying additional solutions of potential interest. Nevertheless, this research showed that a particular solution with a better objective balance can be identified. The actual sequence of additional solutions generated will depend upon the objectives and preferences of the DM in a specific application.

97 MATHEMATICS AND COMPUTING↗

Load-Shifting Strategies for Cost-Effective Emission Reductions at Wastewater Facilities

Significant hourly variation in the carbon intensity of electricity supplied to wastewater facilities introduces an opportunity to lower emissions by shifting the timing of their energy demand. This shift could be accomplished by storing wastewater, biogas from sludge digestion, or electricity from on-site biogas generation. However, the life cycle emissions and cost implications of these options are not clear. Here, we present a multiobjective optimization framework for comparing cost- and emission-minimizing load-shifting strategies at a California case study facility with a relatively low carbon intensity grid and high spread in peak and off-peak electricity prices. We evaluate cost and emission trade-offs from the optimal flexible operation of both existing infrastructure and optimally sized energy flexibility upgrades. We estimate energy-related emission reductions of up to 9.0% with flexible operation of existing infrastructure and up to 16.8% with optimally sized storage upgrades. Only a fraction of these potential savings are realized under actual industrial energy tariffs and the EPA’s recommended social cost of carbon. Energy flexibility may hold promise as a short-term emission-saving solution for the wastewater sector, but the extent of savings is heavily dependent on the cost of carbon, electricity tariffs, and emission intensity of the regional electricity grid.

climate↗

Benchmarking greenhouse gas emissions from US wastewater treatment for targeted reduction

Here, in this study, to assess the national climate impact of wastewater treatment and inform decarbonization, we assembled a comprehensive greenhouse gas inventory of 15,863 facilities in the contiguous USA. Considering location and treatment configurations, we modelled on-site CH 4 , N 2 O and CO 2 production and emissions associated with energy, chemical inputs and solids disposal. Using Monte Carlo simulations, we estimated median national emissions at 47 million tonnes of CO 2 equivalent per year, with on-site process CH 4 and N 2 O emissions exceeding current government estimates by 41%. Treatment configurations with anaerobic digesters are responsible for 16 million tonnes of CO 2 equivalent per year of fugitive methane, outweighing benefits achieved through on-site electricity generation. Systems designed for nutrient removal have the highest greenhouse gas emissions intensity, attributable to energy requirements and N 2 O production, demonstrating current trade-offs between meeting water quality and climate objectives. We analysed key sensitivities and included a geospatial analysis to highlight the scale and distribution of opportunities for reducing life cycle greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗

The Role of Building Codes and Controls in Enhancing Community Resilience

Countries, states, and cities around the world are seeking to enhance power sector resilience through a combination of policy and technology. However, few of these efforts fully incorporate the built environment into power sector planning. Buildings account for more than a third of the global annual energy consumption and more than 60% of the annual electricity consumption. As such, buildings play a critical role in enhancing resilience in the power sector. Buildings can aid in power sector resilience by increasing power system flexibility, shaving and shifting demand, and providing on-site energy generation. All of these strategies require incentives to encourage participation. This paper presents an overview of energy management strategies to better incorporate building design and operation in power sector resilience planning.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hopping approach towards exciton dissociation in conjugated polymers

By employing random walk an analytic theory for the dissociation of singlet excitons in a random organic solid, for instance, a conjugated polymer, has been developed. At variance of conventional three-dimensional Onsager theory, it is assumed that an exciton with finite lifetime can first transfer endothermically an electron to an adjacent site, thereby generating a charge transfer state whose energy is above the energy of that of the initial exciton. In a second step the latter can fully dissociate in accordance with Onsager's concept Brownian motion. The results indicate that, depending of the energy required for the first jump, the first jump contributes significantly to the field dependence of the dissociation yield. Disorder weakens the temperature dependence of the yield dramatically and precludes extracting information on the exciton binding energy from it.

36 MATERIALS SCIENCE↗

Ion-Neutral Collisions in the Interstellar Medium: Wave Damping and Elimination of Collisionless Processes

Most phases of the interstellar medium contain neutral atoms in addition to ions and electrons. This introduces differences in plasma physics processes in those media relative to the solar corona and the solar wind at a heliocentric distance of 1 astronomical unit. In this paper, we consider two well-diagnosed, partially-ionized interstellar plasmas. The first is the Warm Ionized Medium (WIM) which is probably the most extensive phase in terms of volume. The second is the gas of the Local Clouds of the Very Local Interstellar Medium (VLISM). Ion-neutral interactions seem to be important in both media. In the WIM, ion-neutral collisions are relatively rare, but sufficiently frequent to damp magnetohydrodynamic (MHD) waves (as well as propagating MHD eddies) within less than a parsec of the site of generation. This result raises interesting questions about the sources of turbulence in the WIM. In the case of the VLISM, the ion-neutral collision frequency is higher than that in the WIM, because the hydrogen is partially neutral rather than fully ionized. We present results showing that prominent features of coronal and solar wind turbulence seem to be absent in VLISM turbulence. For example, ion temperature does not depend on ion mass. This difference may be due to ion-neutral collisions, which distribute power from more effectively heated massive ions such as iron to other ion species and neutral atoms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of dielectric confinement on photoluminescence of In{sub 2}O{sub 3}-SiO{sub 2} nanocomposite thin films incorporated by nitrogen

Nanocomposite thin films containing In{sub 2}O{sub 3} nanoparticles were prepared by the target-attachment sputtering utilizing the InN pellets and allowing the N{sub 2} inlet gas flow during the deposition process. The x-ray photoelectron spectroscopy revealed that the chemical composition of In{sub 2}O{sub 3} nanoparticles becomes InO{sub x}N{sub y} and the SiO{sub x}N{sub y} phase forms in the matrix of nanocomposite layer. Photoluminescence analysis indicated that the dielectric confinement effect induced by the N-incorporation tends to restrain the green emission of nanocomposite layers due to the presence of surface polarization on nanoparticles. Suppression of blue emission was also observed due to the elimination of oxygen vacancies in In{sub 2}O{sub 3} nanoparticles. Furthermore, the N elements might occupy the oxygen lattice sites and generate a new defect level, N{sub O}{sup -}, to induce the violet emission. Analytical results confirmed the mechanisms of green and blue emissions of the nanocomposite thin films containing In{sub 2}O{sub 3} nanoparticles reported previously.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of La{sup 3+} substitution with Gd{sup 3+} on the resistive switching properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films

This study demonstrated that the resistive switching voltage of perovskite manganite material could be controlled by A-site cation substitution in “A” MnO{sub 3} perovskite manganite structure. A partial substitution of La{sup 3+} in La{sub 0.7}Sr{sub 0.3}MnO{sub 3} with smaller cation Gd{sup 3+} induced A-site vacancy of the largest Sr{sup 2+} cation with surface segregation of SrO{sub y} due to ionic size mismatch, and the induced vacancies reduced migration energy barrier. The operating voltage decreased from 3.5 V to 2.5 V due to a favorable condition for electrochemical migration and redox of oxygen ions. Moreover, surface-segregated SrO{sub y} was enhanced with Gd-substitution and the SrO{sub y} reduced Schottky-like barrier height and resistive switching ratio from the potential drop and screening effect. The relationship between A-site vacancy generation resulting in surface segregation of SrO{sub y} and resistive switching behavior was also investigated by energy resolved x-ray photoelectron spectroscopy, O 1s near edge x-ray absorption spectroscopy, and current voltage measurement.

36 MATERIALS SCIENCE↗

Future grid mix impacts on whole-building life cycle assessment

Building construction and operation are a significant contribution to global greenhouse gas emissions, so understanding and mitigating emissions is crucial for reliable and realistic emissions accounting. Whole-building Life Cycle Assessment (WBLCA) is an emissions accounting method that considers lifetime environmental impacts of a building during its construction, operation, and eventual end-of-life. When performing WBLCAs, emission calculations from the building's operation over the entire building lifespan are typically based on today's energy grid mixes. This method does not consider changes or advancements in the clean energy proportion within the grid mix and can over or under-inflate results, skewing the ratio of embodied vs. operational environmental impacts. While a variety of prediction tools estimate what future grid emissions might be, predictions can vary widely. To predict the clean energy ratio within future grid mixes and the potential impact these changes might have on WBLCA, annual data from several existing U.S. grid models was averaged and probabilistic modeling was used to extend the usable projections of shorter forecasts. Results show that clean energy sources will likely continue to increase over time, although the rate of growth varies by model. On average, by 2085, the clean energy penetration of the grid is projected to reach ~81% and renewable energy is projected to reach ~71%, although no widespread consensus is reached. To understand how the future grid mix impacts lifetime building emissions within a WBLCA context, the team analyzed two 2021 IECC-compliant all-electric residential buildings: one built from traditional materials and construction processes and the other built with carbon sequestering materials and modular assembly, with a portion of energy generated on site. The results indicate that a moderate estimate of future electricity grid mixes shows a reduction of yearly operational emissions for traditional residential buildings of 55% between 2025 and 2085, and a corresponding reduction of 48% of total emissions over a 60 year building lifespan. This study offers a nuanced approach to account for the variability of future grid mix models and provides an average trend-line based on a robust collection of scenarios.

Life Cycle Assessment (LCA)↗

Utilization of Hydroturbines in Wastewater Treatment Plants

Wastewater treatment plants (WWTPs) are a significant energy consumer, yet there are several opportunities for implementing on-site power generation systems. Within the treatment process, the high flow rate of effluent is produced and discharged to a nearby water body by gravity. Thus, hydroturbines can be utilized to generate power in such an application due to a difference in elevation and high flow rate. This paper presents a case study of introducing a hydroturbine in a WWTP in Wisconsin and evaluating the power output in addition to determining the energy savings. The WWTP considered in this study has an effluent flow rate of 190 MGD (million gallons per day) and elevation difference of 3 m (10 ft) between the final stage of treatment and the discharge point. Based on the parameters above; hubless rim-drive Kaplan type hydroturbine (RDT) is the optimal choice to be used in such an application. The RDT is designed and optimized by using in-house code. A computational fluid dynamics (CFD) software is applied to evaluate the performance of the proposed model, and the system is simulated through homer software to validate the results generated by the CFD. The expected savings is estimated to be 1564 MWh/yr.

Energy & Fuels↗

Field Evaluation of a Near Zero Energy Home in Oklahoma

The authors evaluated a zero energy home built by Ideal Homes in Edmond, Oklahoma, that included an extensive package of energy-efficient technologies and a photovoltaic array for site electricity generation. The home was part of a Building America research project in partnership with the Building Science Consortium to exhibit high efficiency technologies while keeping costs within the reach of average home buyers.

14 SOLAR ENERGY↗

Enhanced phyto-extraction of cadmium and zinc using rapeseed

In a green house pot experiment, the effects of three amendments, sulphur (S), ammonium sulphate ((NH{sub 4}){sub 2}SO{sub 4}) and ethylenediaminetetracetic acid (EDTA) were tested for phyto-extraction of Cd and Zn by rapeseed (Brassica napus L.). Elemental sulphur was applied as 20.00, 60.00, and 120.00 mg.kg{sup -1} soil. EDTA was tested at a dose of 585.00 mg.kg{sup -1} soil, and (NH{sub 4}){sub 2}SO{sub 4}) at a rate of 0.23 mg.kg{sup -1} soil. All treatments received a base fertilization (Hogland) before sowing. Plants were harvested after 51 days of growth and shoot dry matter and soil samples were analysed for metal contents. All amendments caused a significant increase in Cd and Zn contents in plant shoots of all treatments than control treatment. Further, EDTA was most effective for extraction metals concentrations in shoot biomass but the plants showed significant signs of toxicity and yield were severely depressed. The addition of sulfur favorably influenced plant biomass production. The fertilized ammonium sulfate treatment resulted in the highest phyto-extraction of Cd and Zn and the amounts of these metals accumulated in plant shoot exceeded by a factor of 4 and 3 respectively. Finally, Brassica napus could be used for soil remediation keeping its other uses which will make the contaminated site income generating source for the farmers. (authors)

54 ENVIRONMENTAL SCIENCES↗