Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generation IV”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Results of the Phenix Dissymmetric Test Benchmark Exercise

In the context of the European H2020 project SESAME, a work package was dedicated to the validation of code coupling for the thermal-hydraulics of pool type reactors. To this end, CEA proposed a benchmark exercise of the so-called dissymmetric test performed at the end of life of the PHENIX reactor. The PHENIX reactor was an experimental reactor operated by CEA in France from 1974 until 2009. The knowledge and data acquired over the lifetime of this reactor are of paramount importance for the development of future sodium-cooled generation IV reactors. At the beginning of this test, the reactor is operated at nominal power (350 MWth) with 3 primary pumps and 4 intermediate heat exchangers. During this test, a pump trip occurs at the secondary side of one of the two loops (one loop provides coolant to two intermediate heat exchangers). The chain reaction is then stopped while the pumps remain operating at nominal speed. Dissymmetric flow patterns are then observed in the cold pool as hot sodium leaves the intermediate heat exchangers that are no longer cooled. The failed secondary pump is then restarted while the rotational speed of the other is reduced. Eventually, a stable homogeneous state is reached. This transient is challenging for both modelers and codes since this exercise tackles an industrial scale reactor featuring complex flows and interactions between different scales. The physical phenomena observed include thermal stratification, flow mixing and buoyancy effects. In order to accurately model these phenomena for a reasonable computational costs, the partners used System Thermal Hydraulics codes coupled with Computational Fluid Dynamics codes and one even included a subchannel code. In this paper, the PHENIX reactor and its behavior during the dissymmetric test are described. Then, a comparison of the different modeling options selected by the partners is offered. Finally, the results are compared to the experimental data and discussed and modelling recommendations are proposed.

code coupling↗

Support for Fuel Fabrication and Characterization

Oak Ridge National Laboratory (ORNL) has participated in the Advanced Gas Reactor (AGR) program for the Next Generation Nuclear Plant (NGNP) and the transition to the Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) Technology Development Office (TDO) since the inception of the program. In this effort, ORNL has fabricated tristructural isotropic (TRISO) fuel and fuel compacts for AGR-1, AGR-2, and AGR-3/4 experiments, provided matrix only components for AGC-2, AGC-4, and AGR 3/4 experiments and for university studies, and provided characterization, coating, and compaction support for INL and BWX Technologies Nuclear Operations Group (BWXT). In fiscal year (FY) 2017, the activities for the INL ART TDO fuel development are focused on preparations for the AGR-5/6/7 experiments and technical support to the Generation IV (GenIV) pre-irradiation leach-burn-leach round robin effort with China and South Korea. With the successful transfer of fuel fabrication technology to BWXT, ORNL’s involvement has shifted toward transferring fuel characterization methods, providing technical support, verification of BWXT laboratory results, and fabricating surrogate fuel materials for university collaborations. ORNL will also provide analytical support to BWXT and INL for uranium dispersion analysis and confirmatory fuel characterization analyses as needed.

Support for Fuel Fabrication and Characterization

Oak Ridge National Laboratory (ORNL) has participated in the Advanced Gas Reactor (AGR) program for the Next Generation Nuclear Plant (NGNP) and the transition to the Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) Technology Development Office (TDO) since the inception of the program. In this effort, ORNL has fabricated tristructural isotropic (TRISO) fuel and fuel compacts for AGR-1, AGR-2, and AGR-3/4 experiments, provided matrix only components for AGC-2, AGC-4, and AGR 3/4 experiments and for university studies, and provided characterization, coating, and compaction support for INL and BWX Technologies Nuclear Operations Group (BWXT). In fiscal year (FY) 2018, the activities for the INL ART TDO fuel development are focused on final characterization to support the AGR-5/6/7 experiments and technical support to the Generation-IV International Forum (GIF) pre-irradiation leach-burn-leach (LBL) round robin effort with China and South Korea.

Molten salt to supercritical CO2 diffusion-bonded heat exchanger testing to support component certification for advanced nuclear power systems

Commercial utilization of the diffusion-bonded heat exchanger (DBHE) for high-temperature applications has prompted an ASME Boiler and Pressure Vessel Code Case development effort to employ these components in Section III (nuclear plant) applications. As part of this effort, a series of DBHE have been fabricated. These heat exchangers will be among the first printed-circuit geometries to be tested for functionality in a molten salt environment. These 15-25kW test specimens will be evaluated under steady-state conditions to compare pressure drop and terminal temperatures measurements with those predicted by existing flow and heat transfer correlations. The test units will then be subjected to thermal transients similar to those expected in Generation IV reactor systems by varying the hot and cold fluid mass flow rates and by changing inlet temperatures. Data collected from these tests will narrow the technical gaps related to two-fluid PCHE and identify special design requirements of compact heat exchangers containing primary reactor coolant. Descriptions of one of two test units and the testing plan are discussed here.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Graphite Oxidation Studies Irradiated Graphite, GIF Summary, ASME Task Force, ASTM Activities

Introduction Comparison of Graphite Oxidation Rates for Irradiated and Unirradiated NBG-25 (Rebecca Smith and Austin Matthews, INL) Annealing effect over range of oxidation temperatures Irradiation effect (~6.5 dpa) over range of oxidation temperatures Dose dependency of irradiation effect Generation IV International Forum High Level Deliverable Summary of DOE ART Historic Oxidation Research (Cristian Contescu, ORNL) Publications issued over the last ~10 years Acute and chronic oxidation ASME Graphite Oxidation Task Force (C. Contescu, Paul Ryan, ORNL, Joe Bass, A. Matthews, R. Smith, INL) Collaborative effort headed by ORNL and engaging INL and others Initial review of relevant oxidation discussion in ASME code ASTM Activities (C. Contescu) Virtual Meetings New and Revised Standards

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ECAR-1930 BASELINE CHARACTERIZATION DATABASE VERIFICATION REPORT - NBG-18 BILLET 635-14

The purpose of this Engineering Calculations and Analysis Report is to present the data being collected in the Baseline Graphite Characterization program, which is directly tasked with supporting the Idaho National Laboratory’s (INL’s) research and development efforts on the Next Generation Nuclear Plant (NGNP)/Very High Temperature Reactor (VHTR). This program is populating a comprehensive database that will reflect the baseline properties of nuclear-grade graphite with regard to individual grade, billet, and position within individual billets. The physical and mechanical property information being collected will be transferred to the NGNP Data Management and Analysis System (NDMAS), and from that database will help populate handbook of property data available to member nations of the Generation IV International Forum (GIF). The transfer of this data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents that analysis for a single billet of nuclear grade graphite (NBG-18 billet 635-14) and facilitates the release of the associated data to the NDMAS custodians.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Baseline Characterization Database Verification Report - PCEA Billet 02S8-5

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory's (INL's) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite regarding individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 02S8-5 and facilitates release of associated data to the NDMAS custodians.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Baseline Characterization Database Verification Report - PCEA Billet 01S8-9

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory's (INL's) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite with regard to individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 01S8-9 and facilitates release of associated data to the NDMAS custodians.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Additively Manufactured Strain Sensing for Nuclear Reactor Applications

Real-time monitoring of materials in harsh environments is a crucial technique towards reducing innovation time in nuclear systems. The successful measurement of real time, in-situ strain measurements during nuclear reactor operation requires innovative sensing solutions, including novel sensing strategies as well as advanced sensor design, manufacturing, and materials selection. In this paper, we will discuss two primary strategies for in-situ strain measurement strategies: additively manufactured (AM) capacitive strain gauges (CSGs) and digital image correlation (DIC). Current commercial strain gauges have limited applications in reactors due to the harsh operating conditions and non-trivial attachment strategies (i.e., welding, epoxy-adhesive) that can affect both the sensing performance and the underlying substrate under testing. AM CSGs are a viable solution as they have a low profile, low hysteresis, and wireless sensing integration capabilities that will enhance nuclear sensing technologies. In this work, the mechanical and thermal performance of the AM CSGs were tested up to 300 °C using ASTM standardized testing procedures to simulate the temperatures found in existing light water reactors. The AM CSGs had a similar performance across multiple samples which correlates to analytical models. This work leads towards the development of CSGs designed for higher temperatures and additional environmental factors found in Generation-IV reactors. Non-contact sensors, such as DIC, offer a less destructive way to measure deformation of materials when compared to alternative methods of in-situ strain determination, such as weldable strain gauges. However, DIC requires high contrast surfaces, which often relies on the implementation of artificial patterns. Using traditional splatter techniques to fabricate these patterns have limitations, including poor surface adhesion and reproducibility. In this work, AM fabrication techniques were implemented to avoid such limitations. Accordingly, aerosol jet printing (AJP) was used to print small scale periodic patterns of silver on stainless steel and aluminum tensile specimens. DIC was employed to monitor strain (up to 1100 µe) during temperature cycling from 23-600 °C. The results validated the use of AJP to better control pattern parameters for small fields of view applications at high temperatures.

36 MATERIALS SCIENCE↗

Status of U.S. DOE Deliverables 0 July 2023

An annual status of the US TRISO fuel qualification program is provided, with a focus on activities linked to the Generation IV International Forum (GIF) Very High Temperature Reactor (VHTR) Fuel and Fuel Cycle (FFC) Project Management Board (PMB).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plant maintenance and advanced reactors issue, 2008

The focus of the September-October issue is on plant maintenance and advanced reactors. Major articles/reports in this issue include: Technologies of national importance, by Tsutomu Ohkubo, Japan Atomic Energy Agency, Japan; Modeling and simulation advances brighten future nuclear power, by Hussein Khalil, Argonne National Laboratory, Energy and desalination projects, by Ratan Kumar Sinha, Bhabha Atomic Research Centre, India; A plant with simplified design, by John Higgins, GE Hitachi Nuclear Energy; A forward thinking design, by Ray Ganthner, AREVA; A passively safe design, by Ed Cummins, Westinghouse Electric Company; A market-ready design, by Ken Petrunik, Atomic Energy of Canada Limited, Canada; Generation IV Advanced Nuclear Energy Systems, by Jacques Bouchard, French Commissariat a l'Energie Atomique, France, and Ralph Bennett, Idaho National Laboratory; Innovative reactor designs, a report by IAEA, Vienna, Austria; Guidance for new vendors, by John Nakoski, U.S. Nuclear Regulatory Commission; Road map for future energy, by John Cleveland, International Atomic Energy Agency, Vienna, Austria; and, Vermont's largest source of electricity, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovation article is titled Intelligent monitoring technology, by Chris Demars, Exelon Nuclear.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bison Verification and Validation Activities for TRISO

Numerical modeling and simulation (M&S) tools play a key role in the research, development, and overall safety assessments of next-generation nuclear energy systems. One such tool, Bison, is a nuclear fuel performance code that is applicable to many fuel forms (e.g., light-water reactor fuel, oxide and metallic fuel for fast reactors, tri-structural isotropic (TRISO) fuel, and plate fuel), and it uses the finite element method to model the thermo- mechanical response of nuclear fuels. One fuel form widely utilized in Generation-IV high-temperature gas-cooled and fluoride- salt-cooled nuclear reactor concepts is TRISO fuel. Recently, Bison’s capabilities were significantly expanded to enable it to model the performance of TRISO particles and compacts. It is important that Bison’s computational results be reliable and predictive, since this code is used to inform high-consequence decisions. The various processes developed to address this issue generally entail two fundamental steps: verification and validation (V&V). Verification ensures that the code functions correctly and is reliable. Code/solution verification, code benchmark, and software quality assurance exercises are examples of verification activities. On the other hand, validation is the process of assessing a code’s capability to accurately model physical problems. Comparisons between code results and experiments quantify the validation level. Application of V&V procedures is crucial to the development of computational tools that are free of coding mistakes and can accurately represent reality. The current study presents an overview of Bison V&V activities relevant to the TRISO fuel concept, which include code/solution verification exercises, CRP-6 Benchmark—a Coordinated Research Program through the International Atomic Energy Agency (IAEA)—exercises, and validation exercises with the Advanced Gas Reactor (AGR)- 1/2/3/4 experiment series.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MYRRHA a multi-purpose hybrid research reactor for high-tech applications

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Computation of a Canadian SCWR unit cell with deterministic and Monte Carlo codes

The Canadian SCWR has the potential to achieve the goals that the generation IV nuclear reactors must meet. As part of the optimization process for this design concept, lattice cell calculations are routinely performed using deterministic codes. In this study, the first step (self-shielding treatment) of the computation scheme developed with the deterministic code DRAGON for the Canadian SCWR has been validated. Some options available in the module responsible for the resonance self-shielding calculation in DRAGON 3.06 and different microscopic cross section libraries based on the ENDF/B-VII.0 evaluated nuclear data file have been tested and compared to a reference calculation performed with the Monte Carlo code SERPENT under the same conditions. Compared to SERPENT, DRAGON underestimates the infinite multiplication factor in all cases. In general, the original Stammler model with the Livolant-Jeanpierre approximations are the most appropriate self-shielding options to use in this case of study. In addition, the 89 groups WIMS-AECL library for slight enriched uranium and the 172 groups WLUP library for a mixture of plutonium and thorium give the most consistent results with those of SERPENT. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reanalysis of the gas-cooled fast reactor experiments at the zero power facility proteus - Spectral indices

The gas-cooled fast reactor (GCFR) concept was investigated experimentally in the PROTEUS zero power facility at the Paul Scherrer Inst. during the 1970's. The experimental program was aimed at neutronics studies specific to the GCFR and at the validation of nuclear data in fast spectra. A significant part of the program used thorium oxide and thorium metal fuel either distributed quasi-homogeneously in the reference PuO{sub 2}/UO{sub 2} lattice or introduced in the form of radial and axial blanket zones. Experimental results obtained at the time are still of high relevance in view of the current consideration of the Gas-cooled Fast Reactor (GFR) as a Generation-IV nuclear system, as also of the renewed interest in the thorium cycle. In this context, some of the experiments have been modeled with modern Monte Carlo codes to better account for the complex PROTEUS whole-reactor geometry and to allow validating recent continuous neutron cross-section libraries. As a first step, the MCNPX model was used to test the JEFF-3.1, JEFF-3.1.1, ENDF/B-VII.0 and JENDL-3.3 libraries against spectral indices, notably involving fission and capture of {sup 232}Th and {sup 237}Np, measured in GFR-like lattices. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty analysis of a SFR core with sodium plenum

The new concepts of Sodium-cooled Fast Reactors have to reach the Generation IV safety objectives. In this regard the Sodium Void Effect has to be minimized for the future projects of large-size SFR as well as the uncertainties on it. The Inst. of Radiological Protection and Nuclear Safety (IRSN) as technological support of French public authorities is in charge of safety assessment of operating and under construction reactors, as well as future projects. In order to state about the safety of new SFR designs the IRSN must be able to evaluate core parameters and their uncertainties. In this frame a sensitivity and uncertainty study has been performed to evaluate the impact of nuclear data uncertainty on sodium void effect, for the benchmark model of large SFR BN-800. The benchmark parameters (effective multiplication factor and sodium void effect) have been evaluated using two codes, the deterministic code ERANOS and the Monte Carlo code SCALE, while the S/U analysis has been performed only with SCALE. The results of the these studies point out the most relevant cross section uncertainties that affect the SVE and how efforts should be done in increasing the existing nuclear data accuracies. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the multidimensional modeling of fluid flow and heat transfer in SCWRS

The Supercritical Water Reactor (SCWR) has been proposed as one of the six Generation IV reactor design concepts under consideration. The key feature of the SCWR is that water at supercritical pressures is used as the reactor coolant. Although at such pressures, fluids do not undergo phase change as they are heated, the fluid properties experience dramatic variations throughout what is known as the pseudo-critical region. Highly nonuniform temperature and fluid property distributions are expected in the reactor core, which will have a significant impact on turbulence and heat transfer in future SCWRs. The goal of the present work has been to understand and predict the effects of these fluid property variations on turbulence and heat transfer throughout the reactor core. Spline-type property models have been formulated for water at supercritical pressures in order to include the dependence of properties on both temperature and pressure into a numerical solver. New models of turbulence and heat transfer for variable-property fluids have been developed and implemented into the NPHASE-CMFD software. The results for these models have been compared to experimental data from the Korea Atomic Energy Research Inst. (KAERI) for various heat transfer regimes. It is found that the Low-Reynolds {kappa}-{epsilon} model performs best at predicting the experimental data. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗